BODY : CI , WCB , SS DISC : SGI , SS304 , SS316 SEAT : NBR , EPDM OPERATED : HAND LEVER , GEAR , ACTUATOR Wafer Type Butterfly Valve
5MA-4100-161 Solenoid K-300-APCK For Komori Offset Press Parts /Komori Machine Parts Part Number :5MA-4100-161
Specification: 1. Nominal pressure or pressure level: pn1.0-32.0 MPa, ANSI CLASS 150-900, jis10-20k; 2. Nominal diameter or caliber: DN6 ~ 900, NPS 1/4 ~ 36; 3, connection: flange, butt welding, thread, socket welding, etc. 4. Applicable temperature: -196 ~ 540; 5. Driving mode: manual, worm wheel and worm drive, pneumatic, electric, hydraulic, gas-liquid linkage, electro-hydraulic linkage; 6, body material: WCB, ZG1Cr18Ni9Ti, ZG1Cr18Ni12Mo2Ti, CF8(304), CF3(304L), CF8M(316), CF3M (316L), Ti.Choose different materials, suitable for water, steam, oil, nitric acid, acetic acid, oxidation medium, urea and other media. Product Advantages: Ball valve is a new valve widely used in recent years, it has the following advantages: 1.The fluid resistance is small, and its resistance coefficient is equal to the same length of pipe section. 2.Simple structure, small size and light weight. 3.Tight and reliable, the sealing surface material of ball valve is widely used in plastic, good sealing, and has been widely used in vacuum system. 4.Easy to operate, fast to open and close, from full open to full close as long as the rotation of 90 , easy to remote control. 5.Easy maintenance, ball valve structure is simple, sealing ring is generally active, disassembly and replacement are more convenient. 6.When fully open or fully closed, the sealing surface of the ball and valve seat is isolated from the medium, which will not cause erosion of the sealing surface of the valve when the medium passes through. 7.Wide range of applications, from small diameter to a few millimeters, large to a few meters, from high vacuum to high pressure can be applied.Valves of this type shall generally be installed horizontally in pipelines.
Description: Manual, flange connection, open rod wedge type resilient gate, seat sealing surface material is nitrile rubber copper alloy, nominal pressure PN10~PN16, body material is ductile iron resilient seat sealing gate valve.
Worm butterfly valve, Cast iron gate valve, Cast iron ball valve, valve
Material: Ductile Iron, Grey Iron Size: DN50, DN65, DN80, DN100~ DN300 PN: PN100~PN160 Working pressure: 10-16.0mpa Medium: Water Z45T-10, Z45T-16Q series no-rising stem wedge type single gate valve: manual, flange connection, dark stem wedge type rigid single gate, seat sealing surface material is bronze, nominal pressure PN10~PN16, body material is gray iron (z45t-10), ductile iron (z45t-16q) gate valve.
Application: It has the function of automatic compensation pipeline expansion and cold contraction for easy loading and unloading. It is used as the best device for regulating flow rate and carrying cut-off body on petroleum, chemical, electric power, paper making, water supply and drainage and municipal construction pipelines with the temperature below 425 and nominal pressure below 1.6MPa. Product feature: 1. Unique structure, flexible design, light weight, labor saving, quick opening and closing 2, telescopic butterfly valve can not only compensate the thermal expansion and cold contraction caused by the shrinkage of pipeline temperature difference, but also provide convenience for the installation and replacement of maintenance valve 3. The sealing part can be adjusted and replaced, and the sealing performance is reliable
Material: WCB, ZG1Cr18Ni9Ti, Cr Mo steel Size: DN40, DN50, DN65, DN80, DN100 ~ DN600 PN: PN16~PN160 Working pressure: 1.6 ~16mpa Medium: steam,oils Standard: Design GB/T 12234 Structure length GB/T 12221 Flange JB/T 79 Testing JB/T 9092 Pressure-Temp. GB/T 9131 Product marking GB/T 12220 Application: Wedge gate valve is widely used in petrochemical industry, thermal power plant and other oil products steam pipeline to connect or cut off the medium of the pipeline device. Characteristics 1. Compact structure, reasonable design, good rigidity of valve, smooth passage and small flow coefficient 2, sealing surface of stainless steel and hard alloy, long service life 3. Flexible graphite packing, reliable sealing and flexible operation 4. The driving mode is manual, pneumatic, electric and gear 5. The structure is of elastic wedge type single ram and rigid wedge type single ram and double ram
Application: It is suitable for regulating flow and intercepting medium on the gas pipeline of water supply and drainage, such as pharmaceutical, chemical, petroleum, electric power, light textile, paper making, etc Product feature: 1, simple and compact structure, small and light, easy to disassemble and maintenance, and can be installed in any location 2, 90 degrees of rotation, open and close quickly 3, flow characteristics tend to be straight, good regulation performance4, choose different parts material, can be applied to a variety of media
Structural characteristics: 1. The selected materials are exquisite, in line with relevant domestic and international standards, and have high overall quality. 2.the sealing pair of advanced and reasonable, improve the sealing performance, long service life. 3. The products are designed and manufactured according to the national standard GB/T12235, with novel structure and beautiful shape.The connecting end has flange and welding, which can be matched according to different requirements of users. 4. The packing box is designed as a water sealing structure, connected with water packing of 0.6 ~ 1.6 pa, with low friction and good sealing, which can isolate the system from the atmosphere and ensure good air tightness. It is an environmental protection product. 5.the valve stem after conditioning and surface nitriding treatment, has good corrosion resistance, abrasion resistance and abrasion resistance. 6.compact structure, flexible operation, convenient maintenance. 7. The inverted seal is made of stainless steel thread connection seal or austenitic stainless steel surfacing. The seal is reliable.Packing replacement can be carried out without stopping the machine, convenient and fast without affecting the system operation.
Three-piece ball valve with internal thread connection belongs to a type of ball valve with internal thread connection.Valve body casting adopts advanced technology introduced from Taiwan, with reasonable structure and beautiful shape. Feature: Three-piece ball valve with internal thread connection belongs to a type of ball valve with internal thread connection.Valve body casting adopts advanced technology introduced from Taiwan, with reasonable structure and beautiful shape.The valve seat USES the elastic sealing structure, the sealing is reliable, opens and closes easily.The valve stem adopts the downassembly structure with inverted seal, and the valve stem will not be flushed out when the valve chamber increases pressure abnormally. Three-piece ball valve connection form also butt welding (BW) socket welding (SW), and can be equipped with international standard ISO bracket platform and locking device.Can set 90 switch positioning mechanism, according to the need to add a lock to prevent misoperation, ball valve is a rotation of 90diameter ball valve) flow coefficient flow resistance coefficient is small, simple structure, long service life, easy to maintain. Application: widely used in the system control of chemical industry, petroleum industry, light textile industry, electric power industry, food and pharmaceutical industry, refrigeration industry and paper industry.Driving mode: manual, electric and pneumatic.
Design: EN 837-1 Dial Face Sizing: 4" (100MM Housing) Material Specification: Housing: Stainless Steel Thread: Brass Connections: NPT Pressure Range: Up to 700Bar Style of Scales: Bar / Psi
Brand : Kisna Pneumatics Weight : 150g Base Diameter : 6mm, Width : 79mm Inlet : 1/2 inch BSP, Pipe Thread Type & Size : Rc, 1/2/inch The drain housings are made of first-class aluminium alloy materials through die-casting technology, strong and tight, surface is plastic-sprayed, can resist corrosion by synthetic lubricants of air compressor. Easy to install and clean, no noise and compressed air loss, running safely. Better to clean drain bodies weekly to guarantee better drainage effect and less blockage. Originated from the automatic draining design of the freestyle float ball, KISNA drains are free from electricity, safe, low carbon, environment friendly and really help our end users save costs. Working Principle: Drains are designed with float ball drain system. The outlet of the drain will close and stop draining if the draining buoyance is smaller than the float ballâ??s weight and the pressure from the compressed air. It will have a trickle of drainage if the float weight and pressure are balanced. It will open and start draining if the draining buoyance is greater than the float balls weight and the pressure from the compressed air. It works cyclically according to the buoyance.
Valve Size : 1/2 inch BSP (Inlet),1/2 inch (Outlet) Pressure : 16BAR Brand : Kisna Pneumatics Material : Flame retardant ABS Plastic (Shell Material) Manual test button : Yes( micro switch ) We are presenting an excellent quality assortment of Electronic Auto Drain Valve.
For pressure testing on the gas line etc 2" dial size, brass bell shape gas test body, 3/4 NPT female thread adapter attaches directly to gas line Pressure range: 0-30psi single scale, 0.2psi division Black steel case, brass wetted parts, dry Accuracy: +/-3-2-3%
Adapts to 3/4" M.P.T. 2" steel case gauge, plated body with 3/4" F.I.P. inlet, brass air valve. Individually boxed. The Product is manufactured in China.
Test gas line pressure Easy to read gauges 0 15 PSI in 1/10 lb dial increments 0 30 PSI in 1/4 lb increments 0 60 PSI in 1 lb dial increments 0 100 PSI in 1 lb increments Intended for single use only
Pump casting Pump casing casting|pump casing foundry|Chinese pump casing foundry A pump is a machine that delivers fluid or pressurizes fluid. It transfers the mechanical energy of the prime mover or other external energy to the liquid to increase the liquid energy. The casting materials of pump casing are commonly cast iron, cast steel, bronze, etc. According to the strength, corrosion resistance, casting and machining performance, they are divided into cast iron gray cast iron HT200HT250GB9439-88 gray cast iron parts, old brand HT20-40HT25-47 copper molybdenum gray iron HT200CuMo Same as above low nickel cast iron STNi2CrQJ/S f2.34-1996 low nickel cast iron technical conditions wear-resistant cast iron casting stainless steel martensitic cast steel ZG1Cr13G2Cr13GB2100-80 stainless acid-resistant steel casting technical conditions ZG1Cr13NiQJ/S f2.01-199 carbon structural steel and Low alloy steel Q235-A.F16MnG. Mass casting production can be carried out according to drawings and samples.
valve type:butterfly valve valve body and disc: UPVC valve seat: EPDM valve stem: SS304 valve size: DN25-DN200, 1"-8" end connection: wafer media: water,oil,gas etc working pressure: PN10bar working temperature:-20C-+120C air pressure: 3-8bar actuator type: rotary 90degree
Mono Check Dobby Tea Towels in Different sizes 40 x 60 cm, 50 grm 46 x 71 cm, 60 grm 51 x 81 cm, 100 grm 60 x 90 cm, 175 grm
