Wanted : Chemical Like Oxalic Acid And Hydrofluoric Acid Suppliers and Manufacturers

PRODUCT DATA SHEET ACID RESISTANT BRICK Material : FIRECLAY Type Acid Resistant Brick Size (mm) : 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : * We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: * Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions - Heavy thermal shock Characteristic Fireclay Type Acid Resistant Brick - Test Standard Bulk Density, lbs/ft3 - 2.25 to 2.30 ASTM C-20 Water Absorption, % - 0.1 to 1.8 ASTM C-20 Apparent Porosity, % - 4.05 to 4.14 ASTM C-20 Acid Solubility (H2SO4), Loss in Mass,% - 6.1 to 6.8 ASTM C-279 Modulus of Rupture, Mpa - 14.6 ASTM C-67 Compressive Strength, PSI - 15500 to 17250 ASTM C-67 Abrasion Resistant , Volume in mm3 - 71 to 96 EN 102 Surface Hardness, MOHS Scale - 7 Thermal Conductivity, BTU-in/hr-ft-F - 6.94 to 7.12 ASTM C-236 Thermal Expansion Coefficient,in/in/Fx10-6 - 2.6 to 2.8 EN 103

Premium Blend (Espresso Blend) is 65% Arabica and 35% Robusta. Roasting coffee transforms the chemical and physical properties of green coffee beans into roasted coffee products. The roasting process is what produces the characteristic flavour of coffee by causing the green coffee beans to change in taste. Roasted beans smell like coffee, and weigh less because the moisture has been roasted out. They are crunchy to the bite, ready to be ground and brewed.

Crema Blend is 60% Arabica and 40% Washed Robusta. Roasting coffee transforms the chemical and physical properties of green coffee beans into roasted coffee products. The roasting process is what produces the characteristic flavour of coffee by causing the green coffee beans to change in taste. Roasted beans smell like coffee, and weigh less because the moisture has been roasted out. They are crunchy to the bite, ready to be ground and brewed.

Regular Blend is a blend of 30% Arabica and 70% Robusta. Roasting coffee transforms the chemical and physical properties of green coffee beans into roasted coffee products. The roasting process is what produces the characteristic flavour of coffee by causing the green coffee beans to change in taste. Roasted beans smell like coffee, and weigh less because the moisture has been roasted out. They are crunchy to the bite, ready to be ground and brewed.

Speciality blend is a mixed blends of 100% Arabica. Roasting coffee transforms the chemical and physical properties of green coffee beans into roasted coffee products. The roasting process is what produces the characteristic flavour of coffee by causing the green coffee beans to change in taste. Roasted beans smell like coffee, and weigh less because the moisture has been roasted out. They are crunchy to the bite, ready to be ground and brewed.

Economy blend is a blend of 70% Robusta and 30% Arabica Cherry. Roasting coffee transforms the chemical and physical properties of green coffee beans into roasted coffee products. The roasting process is what produces the characteristic flavour of coffee by causing the green coffee beans to change in taste. Roasted beans smell like coffee, and weigh less because the moisture has been roasted out. They are crunchy to the bite, ready to be ground and brewed.

Product Name malic acid Appearance White crystal powder Particle Size 80 Mesh Certificate ISO9001/Halal/Kosher/GMP Storage Store in cool & dry place. Keep away from strong light and heat. Packing 1kg/Foil bag, 25kgs/Drum (Two plastic-bags inside with Paper-drums), Or as per customer's requirements.) Shelf Life 2 years under well storage situation. L-malic acid is an important component of natural fruit juice. Compared with citric acid, it has high acidity (the acidity is 20% stronger than citric acid), but the taste is soft (has a higher buffer index), has a special fragrance, and does not damage the mouth and teeth. It is metabolically beneficial to the absorption of amino acids and does not accumulate fat. It is a new generation of food soursing agents. It is hailed as "the most ideal food soursing agent" by the biological and nutritional circles. Since 2013, it has been replacing citric acid in food for the elderly and children.

1. Chemical Name: Sodium Pyrophosphate 2. Formula: Na4P2O7, Na4P2O7, 10H2O 3. Molecular weight: 265.90, 446.06 4. Specificity: Colorless or white crystals, crystalline or granular powder. It is easily soluble in water, but is insoluble in alcohol. Density: 2.45, relative density: 2.45, melting point: 890? . The decahydrate effloresces slightly in dry air. pH of 1% solution is about 10. 5. Quality Standard: 6. Usage: It is mainly used as detergent, electroplating . ctFor food grade it is mainly used as emulsifier, buffer, nutrient, sequestrant, texturizer 7. Packing: 25kgs net paper or plastic woven bags. 8. Storage and Transport: It should be stored in a dry, ventilative and clean warehouse kept away from moisture and hot, Furthermore, it should be stored separately from poisonous Substances.

Specifications sodium linear alkylbenzene sulfonate 1. Sodium Linear Alkyl Benzene Sulfonate / LAS 2. LAS 60,70,80,90 3. Detergent raw mater Best Price Sodium linear alkylbenzene sulfonate for making laundry powder Chemical name: Sodium Linear Alkyl Benzene Sulfonate Synonyms: Sodium 4-dodecylbenzenesulphonate; Dodecylbenzenesulfonic acid sodium salt; sodium dodecyl benzene sulfonate CAS No.: 25155-30-0 EINECS : 246-680-4 Molecular Formula: C18H29NaO3S Molecular weight: 348.48 Model: LAS-60, LAS-70, LAS-80, LAS-90, LAS-95 Property: This product is a white to light yellow powder particle, nontoxic, odorless and completely soluble in water and is a high efficiency disperser for emulsification with remarkable anti-electrostatic effect.

Liquid Ethyl Acetate: Ethyl Acetate is an ester of Ethanol and Acetic Acid, (systematically Ethyl Ethanoate, commonly abbreviated EtoAc or EA) an organic compound having formula CH3COOCH2CH3. Liquid Ethyl Acetate is a colorless solvent has a characteristic sweet / fruity smell. We are a distinguished Liquid Ethyl Acetate Exporter based in India. Liquid Ethyl Acetate, offered by us, is perfect in formulation is well-tested. Further, we welcome bulk orders for Liquid Ethyl Acetate with complete sense of responsibility. Applications: - Ethyl Acetate is used in a variety of coating formulations such as epoxies, urethanes, cellulosic, acrylics and vinyl’s. - Applications for these coatings are numerous wood furniture and fixtures, agricultural, construction and mining equipment, auto refinishing, and maintenance and marine uses. - Ethyl Acetate has applications as a solvent in inks for flexographic and rotogravure printing. - It is used as an extraction solvent in the production of pharmaceuticals and food, and as a carrier solvent for herbicides. - High purity product can be used as a viscosity reducer for resins used in photoresist formulations in the electronics industry.

PRODUCT DATA SHEET ACID RESISTANT BRICK Material : RED SHALE Type Acid Resistant Brick Size (mm) 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions Heavy thermal shock Typical Physical Properties of GANESHAS Acid and Chemical Resistant Brick Characteristic RED SHALE ACID RESISTANT BRICK Test Standard Bulk Density, gm/cc - 2.3 to 2.35 ASTM C-20 -Water Absorption, % - 0.1 to 1.5 IS 4860-1968 Apparent Porosity, % -0.5 to 1.75 S 4860 Acid Solubility (H2SO4), Loss in Mass,% -0.1 to 1.8 ASTM C-279 Modulus of Rupture, PSI -2133 to 3555 ASTM C-67 Compressive Strength, Kg/cm2 - 700-900 IS 4860-1968 Abrasion Resistant , Volume in mm3 -69 to 85 EN 102 Surface Hardness, MOHS Scale - 7

LABSA is a significant ingredient in the manufacturing of washing, detergent, and cleaning powders, as well as detergent cake, liquid and oil soaps, scouring bars, and a variety of anionic specialty formulations. It's used as a washing and mercerizing agent in the textile industry.

Linear alkyl benzene sulphonic acid, also known as LABSA is a synthetic chemical surfactant, which is a widely used industrial detergent. It is used in washing powder, detergent powder, oil soap, cleaning powder and detergent cake.

Modified Starch for Confectionary - Acid Treated Starch

Product group - Acid Washed Activated Carbon Feature - Good adsorbent. Color -Black Main Ingredient/Material - 100% Coconut-based Charcoal Grade - "CTC 40-70 / Iodine 800 - 1300" Size - 4x8, 6x12, 8x30, 12x30, 12x40 "Brand Name: - BFCARB Usage - Quality granular/powder Activated Carbon from coconut shell suitable for water, air, food and beverage, pharmaceutical, mining and other various applications with the benefit of cost effectiveness, hardness, ease of handling and more importantly environment-friendly because it is from a renewable source. Certification: - NSF, Halal, Kosher

This is chemical setting Furan based chemical resistant mortar which is combination of Liquid and Powder, when mixed in proper proportion from workable mortar which after setting and curing give of liquid and give black highly cross linked composites. Furan When set and cured is resistant to highly corrosive acids, alkalis and to powerful organic solvents such as ketones, Aromatic and Chlorinated solvents. It has extreme resistant to Acidic & alkalis, Salts, Greases and Detergents. It resists to Organic & Inorganic acids at their boiling temperature. It is suitable against mild chlorine Gas (dry) phosphorous trichloride, pyridine at room temperature. Furan is especially useful where resistance to mixed media such as aqueous acids /alkalis and organic solvents is needed in chemical plant process and waste streams. Carbon filled Furan is used against corrosive effect of hydrofluoric acid & its salts. PREPARATION OF FURANE MORTAR : Mortar consist of Furan solution and Furan powder. The average mixing ratio necessary to obtain mortar with good working consistency is 1 part by weight Solution & 3 part by weight powder. The ratio will vary slightly depending on temperature and working conditions.Stir the liquid thoroughly before using. Place liquid in a suitable shallow mixing pan. Add powder by weight in the solution mix thoroughly and rapidly until all lumps are dispersed and the mortar is completely homogenous. Spread out the mortar in a thin layer, not more than ¾ thick, to dissipate the heat of reaction and lengthen the working life. Batch size can be varied depending upon the temperature and the speed with which the masons are working. Very large batches will become stiff quite rapidly. Make sure that all the Furan Motrar is used from the pan before another batch is mixed.When working at temperature above 40 C, very small batches not more than 2 Kgs, should be prepared. When working at temperature below 15C the liquid should be kept warm.

During Hindalco's copper production process, by-products such as sulphuric acid and copper slag are formed. Sulphuric acid is partly converted into phosphoric acid, which is then made to react with ammonia to make di-ammonium phosphate (DAP) fertiliser. During the process of making phosphoric acid, phosphogypsum and hydrofluosilicic acid (HFA) are formed. HFA is partly utilised to make aluminium fluoride, and rest is sold in the market. Sulphuric acid Hindalco produces sulphuric acid of IS 266/1993 technical grade. The sulphuric acid plants use the double contact double absorption (DCDA) process, and are designed by Monsanto Envirochem (USA). Phosphoric acid Hindalco's phosphoric acid plant is based on the Prayon Mark IV dihydrate technology provided by SNC Lavalin (Belgium). Phosphogypsum Phosphogypsum is a by-product of Hindalco's phosphoric acid plant. Copper slag (iron silicate) Copper slag is produced during the smelting process at Hindalco's copper smelter located at Dahej. Aluminium fluoride Hindalco produces aluminium fluoride by reacting HFA (a by-product of the phosphoric acid plant) with aluminium hydroxide (from Hindalco's aluminium manufacturing facilities).