1.Hardness of annealing: HBS=137~269 2.Surface treatment:black/peeling/polished/machined 3.Regular specifications : round bar diameter(mm) length(mm) 10~600 2000~5700 flat steel Thickness(mm) width(mm) length(mm) 8~700 205~1000 2000~6000 4. Process of Production EAF+LF+VD+ESR+Forged or hot rolled+Heat Treatment(optional) 5. Condition of Surface black/ rough machined/ turned/milled 6. Inspection Ultrasonic Test , according to SEP1921 D/d or as your requirements 7. Technical Data : According to the customer's requirement of Chemical Composition, MechanicalProperties. Material details will be as per agreed technical specifications 8.Applications Used for making mould bottoms,plastic mould , normal mechinery parts and so on
1.Regular specifications : Round bar Diameter(mm) length(mm) 10~600 2000~5700 Flat steel Thickness(mm) width(mm) length(mm) 8~700 205~1000 2000~6000 2. Process of production Eaf+lf+vd+esr+forged or hot rolled+heat treatment(optional) 3. Condition of surface Black/ rough machined/ turned/milled 4. Inspection Ultrasonic test , according to sep1921 d/d or as your requirements 5. Technical data : According to the customer's requirement of chemical composition, mechanicalproperties. Material details will be as per agreed technical specifications 6.Applications Used for making mould bottoms, plastic mould , normal mechinery parts and so on
Size: Round bar:Diameter(mm):Max 800 Length(mm): Max 5800 Plate : Thickness: Max 800 Width(mm): Max 2300 Length(mm): Max 5800 chemical compositions: C: 0.38-0.43 Si: 0.15-0.35 Mn: 0.75-1.00 P: =0.035 S: =0.040 Cr: 0.80-1.10 Mo: 0.15-0.25 The similar steel grades AISI/SAE: 4140 DIN: 1.7225 JIS: SCM44 GB : 42CrMo Features: 1, Chromium molybdenum alloy steel 2, Slightly higher carbon content then 4130 3, Greater strength and heat treatment Applications: 2, Connection rods, collets, conveyor pins 3, Gears, stem assemblies 4, Pump shafts and tool holders
Prdouct Name : Carbon Steel Bar Shape : Round,Square,Flat,Rectangle,etc. Material : Carbon steel :Q195-Q420 Series,SS400-SS540 Series,S235JR-S355JR Series,ST Series,A36-A992 Series,Gr50 Series,etc. Surface : Mild steel plain finish, hot dip galvanized, color coated, ect. Size Tolerance : 3% Processing method : Bending, Welding, Decoiling, Cutting, Punching, Polishing or as customer's request Size : OD from 10 - 400mm, length from 1m-12m or according to customer's special request Technology : Hot roll, cold roll, cold drawn, ect. Trade Term : FOB,CIF,CFR,EXW,etc. Price Term : T/T,L/C Lead time : Small batch can be in 7 days, depending on the quantity Certificate : ISO9001
Steel Grade: Alloy Steel Standard: AISI, ASTM, BS, DIN, GB, JIS Dimensions: dia:10-600mm Place of Origin: Guangdong, China (Mainland) Brand Name: Songshun Model Number: O2/ 1.2842/ SKS31/9Mn2V Technique: forged or hot rolled Application: Die Steel Bar Alloy Or Not: Is Alloy Special Use: Mold Steel Type: Alloy Steel Bar Name: O2 1.2842 mould steel die alloy hot rolled steel round bar Shape: Round bars Technology: Forged/Clod Drawn Heat treatment: Annealing /Q+T Surface treatment: Black/Peeling/Polishing/Machined Test: SGS/UT100%/Elements testing Delivery condition: Hot rolled or forged/ Peeled or black surface/annealed or QT Certificate: ISO/Mill certificate Service: Sample free and 24 hours online Experience: Ten years manufacturer experience
A2 steel is called DIN 1.2363 and JIS SKD12 steel. 1.2363 steel is a cold work mold steel that is improved on the basis of SKD11 steel. The toughness of 1.2363 steel is twice that of SKD11. The retained austenite is almost all decomposed under the conventional heat treatment conditions. The toughness of 1.2363 steel is great in the cold work mold steel. There are no cracks of industrial products due to be made of A2 steel round bar sheet plate material. A2 Steel Application The application is decided by A2 steel chemical composition and properties. It has high hardness and toughness. The application as below: Precision stamping die. Precision blanking dies for wire cutting and stamping die for various purposes. Cold forging, deep drawing and boring molds. High-speed punching punch, stainless steel plate punch. Shear and slitter blades. A2 Steel Characteristics 1.High toughness. The products that were made of A2 steel material almost no cracking or cracking occurs during the use. 2.The machinability is also better than SKD11 steel. Using 1.2363 steel can increase the service life of the mold and get higher production efficiency. 3.High quench hardening ability. so it can efficiently avoid the defects which be caused by insufficient hardness during vacuum heat treatment. 4.The surface hardness is higher after surface hardening treatment. It can efficiently improve the performance of the mold. Songshun specialized in Special Steel for almost 20 years. We can supply mold steel, high speed steel, alloy steel, free cutting steel and etc.Welcome your contact 24 hours a day!!!
O1 steel also is called DIN 1.2510 and JIS SKS3 steel. High content for manganese, chromium and tungsten in 1.2510 steel composition, that could increase the hardening ability. Then the steel does not need to undergo water quenching. After oil cooling and quenching, the hardness could reach 62HRC. O1 tool steel round bar sheet plate was used widely as a cold work mold steel. It is a great material for the blade, metal molds and etc. O1 Steel Application 1.2510 steel is used as a material of tough parts. Such as punches, knock-out pins, cams, and of course, knife blades. And 1.2510 steel is mainly used for short-run tooling for cold forming dies, blanking dies, and cutting tools operating at ambient temperature. Typical applications for O1 tool steel are blanking, forming, and trim dies, gages, slitting cutters and etc. Notice We have our own cutting and processing equipment. Specifications can be cut and customized according to your requirements. We are a professional special steel stockist and supplier with a high-quality stand for many years. Please contact us for any request of O1/1.2510 steels materials. Songshun Steel always with you. Dongguan Songshun Mould Steel Co., LTD which is an industrial and trading company with 3500-7000ts hydraulic forging machine. We provide a great variety of steels, competitive price with good quality and keep the large stock are over 20000 tons.
D6 steel is a high-carbon, high chromium tool steel alloyed with tungsten that is characterized by high compressive strength, high wear resistance, high surface hardness and good hardening stability. It is also called SKD2 steel and DIN 1.2436 steel. And D6 steel chemical composition and heat treatment information are below. Tool steels are primarily used to manufacture tools that can be used for machining metals, woods, and plastics. They are generally ingot-cast wrought products, and have the potential to be stable at elevated temperatures and withstand high specific loads. D6 Steel Application SKD2 steel chemical composition makes it become good tool steel in the industry. SKD2 steel is used for forming tools; molds for abrasive plastics and ceramics; long-run press tools; blanking and shearing tools for hard materials; stamping tools; scraping tools and etc. D6 Steel Round Bar Sheet Plate Heat Treatment Forging SKD2 tool steel is heated slowly and uniformly to 700�°C (1292�°F) and then more rapidly to 900-1050�°C (1652-1922�°F). Annealing SKD2 tool steel is then annealed at 800-840�°C (1472-1544�°F) and cooled. Hardness of the steel after annealing will be approximately 225 Brinell. Stress Relieving Stresses from SKD2 tool steel can be eliminated before hardening by heating up to 650-700�°C (1202-1292�°F), if machining operations have been heavy. The steel is then allowed to cool slowly. Hardening SKD2 steel is pre-heated slowly to 750-800�°C (1382-1472�°F) and thoroughly soaked. Heating is then continued till the final hardening of 950-980�°C (1742-1796�°F), followed by air or oil quenching. Tempering The SKD2 steel is heated uniformly and thoroughly at the selected tempering temperature. Double tempering can also be carried out with intermediate cooling to room temperature. Notice We have our own cutting and processing equipment. Specifications can be cut and customized according to your requirements. We are a professional special steel stockist and supplier with a high-quality stand for many years. Please contact us for any request of D6/SKD2 steels materials. Songshun Steel always with you.
D3 steel also knows as DIN 1.2080 and JIS SKD1, which is a 12% chrome alloy steel. JIS SKD1 steel has very high wear resistance against abrasive and adhesive wear due to the high volume of hard carbides in the steel matrix, medium toughness, dimensionally stable, high compressive strength, not secondary hardenable. D3 Steel Application 1.Highly stressed cutting 2.Punching tools for thin sheet 3.Blanking and forming dies 4.Forming rolls 5.Drawing and deep drawing tools 6.Slitting Knife 7.Stone processing tools 8.Pressure pads 9.Thermosetting plastic molding D3 Steel Round Bar Sheet Plate Heat Treatment Heat Treatment SKD1 steel requires hardening and tempering to achieve maximum properties. For maximum accuracy, the parts of SKD1 tool steel should be stress relieved after roughing operations. Stress should be relieved at 648 C (1200 F) for one hour and cooled slowly. Annealing Annealing of SKD1 steel needs to be done in a controlled atmosphere furnace. D3 steels should be heated thoroughly to 871 C (1600 F) and cooled slowly at a rate of not more than -6 C (20 F) per hour, until the furnace is black. Then the material should be removed and air cooled. Tempering The SKD1 steel should be cooled to room temperature and should be tempered immediately. The parts should be placed in the tempering furnace and increased slowly to the desired tempering temperature. Tempering for 1 hour per inch of thickness is required. Hardening SKD1 steel should be heated properly since it is very sensitive to overheating and if not heated maximum hardness cannot be achieved. The work should be directly placed in a furnace preheated to 954 C (1750 F) and soaked for 20-25 minutes, plus 5 minutes per inch of thickness, and then oil-quenched to harden it. Notice Other specifications are determined by daily stock. Customization is also acceptable. We are a professional special steel stockist and supplier with a high-quality stand for many years. Please contact us for any request of D3 tool steels materials. Songshun Steel always with you.
Heat Treatment DIN 1.2379 steels alloy should be preheated very slowly to 815 (1500 F) and the temperature can be increased to 1010oC (1850 F). Then held at 1010oC (1850 F) for 20 to 45 minutes and air-cooled (air quenched). Annealing Annealing of 1.2379 tool steels material should be done at 871 to 898 C (1600 to 1650 F) followed by slow furnace cooling at 4.4 C (40 F) per hour or less, after which cooling rate could be increased. At the same time, must do something to prevent excessive carburization or decarburization. Stress Relieving Heat it slowly to 1050 -1250 F, allow to equalize, and then cool in still air(Strain Relieving) Preheat Prior To Hardening Preheat slowly to 1350 -1450 F and hold at this temperature until steel 1.2379 steel material is uniformly heated. Hardening After thorough preheating, heat to 1800 -1850 F. Hold it at the hardening temperature until it is completely and uniformly heated. Quenching DIN 1.2379 steel tool material is an air hardening steel and will develop hardness on cooling in still air. To avoid scaling and prevent decarburization on the surface, controlled atmosphere or vacuum furnaces are recommended. Parts should be allowed to cool to 150F, or to where they can be held in the bare hand, and then temper immediately. Tempering The tempering temperature on material 1.2379 steel may be varied according to the desired hardness. 1.2379 steels can be tempered at 204 C (400 F) for achieving Rockwell C hardness of 61 and at 537 °C (1000 F) for a Rockwell C hardness of 54. Compare Chinese Cr12Mo1V1 steel, American D2 steel, Japanese SKD11 steel, the chemical composition of them is the same, but the performance is very different. After heat treatment, the color of Cr12Mo1V1 is a little orange-red, and the deformation would be large. It is easy to fracture during use. And the hardness of D2 steel is higher than SKD11 steel, but the toughness is not better than SKD11 steel. SKD11 steel is light and smooth, with the best overall performance. D2 Steel Forging Heating for forging of AISI D2 tool steel should be done slowly and uniformly. Soak through at 1850 -1950 F and reheat as often as necessary, stopping work when the temperature drops below 1700 F(926 C). After D2 mold steel forging, cool slowly in lime, mica, dry ashes or furnace. D2 steel should always be annealed after forging. Songshun specialized in Special Steel for almost 20 years. We can supply mold steel, high speed steel, alloy steel, free cutting steel and etc.Welcome your contact 24 hours a
D2 steel round bar and plate can be used to produce cold work mold with a large cross-section, complex shape, high impact force, and high wear resistance. It also is called DIN 1.2379 and JIS SKD11 steel. It is a high-carbon and high-chromium cold work mold steel. It is widely used in the world. It has high hardenability and the high-temperature oxidation resistance is good. The anti-corrosion ability is good after quenching and polishing, and the deformation is small after the steel heat treatment. D2 Steel Application 1.2379 steel is used for blanking or forming dies, thread rolling dies, shear knives, food-processing knives, gauges, punches and etc. AISI D2 Steel Round Bar Plate Sheet Supply We have our own cutting and processing equipment. Specifications can be cut and customized according to your requirements. We are a professional special steel stockist and supplier with a high-quality stand for many years. Please contact us for any request of D2/1.2379 steels materials. Songshun Steel always with you. Songshun specialized in Special Steel for almost 20 years. We can supply mold steel, high speed steel, alloy steel, free cutting steel and etc.Welcome your contact 24 hours a day!!!
Type: Stainless Steel Bars Standard: ASTM, AISI, GB, JIS, DIN, EN Certification: ISO, RoHS, IBR, AISI, ASTM, GB, EN, DIN, JIS Shape: Round Technique: Cold Rolled Surface Treatment: Polished
Material:304/304L/316/316L/2205/2507/310S/253MA Technique:Cold Rolled Hot Rolled Surface:BA/2B/NO.1/NO.3/NO.4/8K/HL/2D/1D Length:Customers' Requirements Keyword:Ss Round Bar MOQ:1Ton Payment Term:30%TT Advance + 70% Balance Dimensions:5.5mm-500mm Packing:Standard Seaworthy Package PRICE TERM:CIF CFR FOB Ex-Work Certification:ISO
Material: 304/304L/316/316L/2205/2507/310S/253MA Technique: Cold Rolled Hot Rolled Surface: BA/2B/NO.1/NO.3/NO.4/8K/HL/2D/1D Length: Customers' Requirements Keyword: Ss Round Bar MOQ:1Ton Payment Term: 30%TT Advance + 70% Balance Dimensions: 5.5mm-500mm Packing Standard Seaworthy Package PRICE TERM CIF CFR FOB Ex-Work Certification
It is a medium-sized steel manufacturer which is combined sintering, irion-making, steel-smelting and steel rolling. It has more than 3000 employees. In bundles
manufacturer which is combined sintering, Irion-making, steel-smelting and steel rolling. It has more than 3000 employees. in bundles
1. Production Form: Hot-rolled/cold drawn/ forged round bars 2. Manufacturing Process: EAF/LF/VD/CC/hot rolled/cold drawn/forged 3. Delivery requirements: With or without heat treatment 4. Dimensional Range: 18mm-300mm for hot-rolled bars 16mm to 70mm for cold drawn bars 300mm to 500mm for forged bars 5. Quality Condition: 1): Straightness: 3mm/m (max) 2): Corner Radius: 3(max) 3): The ends will be end cut or gas cut 4): No cracks on the surface 1): Paint oil on the surface to protect steel bars from rusting. 2): Bundle packing by Iron Strips. 3): Bundle weight is from 2mt to 3 mt. 4): Two or three tags will be attached on each bundle. In general, at one end of each bar, tags will be attached, containing the followings: Description of Goods, Heat No., Steel Grade, Size, NR, WT, Date and Origin. Of course, all depends on customers¡¯ requirements.
1. Production Form: Hot-rolled/cold drawn/ forged round bars 2. Manufacturing Process: EAF/LF/VD/CC/hot rolled/cold drawn/forged 3. Delivery requirements: With or without heat treatment 4. Dimensional Range: 18mm-300mm for hot-rolled bars 16mm to 70mm for cold drawn bars 300mm to 500mm for forged bars 5. Quality Condition: 1): Straightness: 3mm/m (max) 2): Corner Radius: 3(max) 3): The ends will be end cut or gas cut 4): No cracks on the surface 1): Paint oil on the surface to protect steel bars from rusting. 2): Bundle packing by Iron Strips. 3): Bundle weight is from 2mt to 3 mt. 4): Two or three tags will be attached on each bundle. In general, at one end of each bar, tags will be attached, containing the followings: Description of Goods, Heat No., Steel Grade, Size, NR, WT, Date and Origin. Of course, all depends on customers¡¯ requirements.
1. Production Form: Hot-rolled/cold drawn/ forged round bars 2. Manufacturing Process: EAF/LF/VD/CC/hot rolled/cold drawn/forged 3. Delivery requirements: With or without heat treatment 4. Dimensional Range: 18mm-300mm for hot-rolled bars 16mm to 70mm for cold drawn bars 300mm to 500mm for forged bars 5. Quality Condition: 1): Straightness: 3mm/m (max) 2): Corner Radius: 3(max) 3): The ends will be end cut or gas cut 4): No cracks on the surface 1): Paint oil on the surface to protect steel bars from rusting. 2): Bundle packing by Iron Strips. 3): Bundle weight is from 2mt to 3 mt. 4): Two or three tags will be attached on each bundle. In general, at one end of each bar, tags will be attached, containing the followings: Description of Goods, Heat No., Steel Grade, Size, NR, WT, Date and Origin. Of course, all depends on customers¡¯ requirements.
Bhawani Industries Limited is an ISO 9001 company engaged in Steel Manufacturing business with its turnover in excess of INR 2500 Million. We manufacture a wide range of products viz. Steel Billets/Blooms, Carbon & Alloy Steels, Engineering Castings, Hot Rolled Strips / Sections, ERW Galvanized & Black Tubes at our integrated steel plant located at Mandi Gobindgarh (Punjab) in India. BIL caters to steel requirements of Engineering, Automotive, Hand Tools, Structural, Construction and Allied Industries. Our manufacturing facility is equipped with advanced production equipments, industrial testing and highly trained manpower that is capable of processing 200,000 MT of steel per annum. Our products conform to Indian & International standards and are manufactured with extensive process control and quality checks at every step from incoming raw material to dispatch of finished products. We export our Steel Pipes & Tube products to various Gulf, African and European Countries. Our exports have grown significantly and we have started exploring more markets worldwide for our other products like special steel castings. Our Company is managed by a highly qualified techno commercial managerial team that is in pursuance of excellence, and committed to maintain international quality standards, efficient delivery schedules, competitive pricing & total customer satisfaction. Grade – 304 L, 321L, 316L & 310L ASTM Grade – 1401 & 1402 Dia – 12mm to 100mm