1. Low noise, due to the helical suction and discharge, the blower air flow in and out according to the direction of spiral line, all these prevent the pulse noise and vibration. What's more, by using the Impedance complex muffler, the noise of our blowers are further reduced. 2. High volume and anti-heat efficiency, so it is energy-saving. The blower rotor adopted the advanced Composite curve, the meshing is more reasonable, and further increases the volume efficiency. 3. Stable performance. The blower rotor, casing, wall panels, shaft and other key components are all produced by the advanced digital-control processing equipment thus make the interchangeability of parts and components increased. 4. Low vibration. Although the rotor has been processed precisely, and are all in balancing condition, we still adopted the high precision balancing equipment and grinding machine to make it more balance. Therefore, the blowers are almost no vibration. 5. With high precise and hardness Synchronization gear, we not only extension blowers life, but also reduce its noise.
High carbon steel wire Dimension: 0.7mm-5.0.Mm steel wire available: 1.0-1.5mm steel wire for helical steel wire; 0.7-2.5mm steel wire for pocket spring or bonnell spring; 4.0-5.0mm steel wire for border spring; 2.0-5.0mm steel wire for zig zag spring Surface: bright, smooth surface with black color, strong rust resistance Standard: gb/t 4357, astm a 227, din17223, en10270 etc. Application: (showed as right picture) Characteristics: lead quenching treated; good fatigue resistance, and well performing through high-speed automatic production machines; standard Coils - steel wires are wined as coil shape strapped with steel strip, outside covered with the pvc paper (80-300kg/coil) Z2 packing - standard z2 packing (400-500kg/coil) Cardboard coils - inside with paper cardboard core, steel wire are strapped with steel strip and iron hook, outside covered with pe paper (500- 1000kg/coil) Steel frame carrier - steel wires are placed with the steel frame and strapped with steel strips (600-1000kg/carrier)
Description: Hydraulic Mill Roll Stand//Corrugated Cardboard Mill Roll Stand/Paperboard Mill Roll Stand: Symmetrical structure, can carry two craft paper at one time, which can work without brake. Reel paper lift-lower, clamp, loosen, movement, contraposition operated by hydraulic pressure. feeding craft / reel paper quickly. Function Of Mill Roll Stand: Each arm setup four directions button, it is easy to operate It can be loading two paper rolls at the same time, without stopping the machine for changing paper roll The whole machine uses 6 cylinders fully hydraulic controlled, hydraulic control arm lift and down, clamping and open, left and right moving Tension control: multipoint pneumatic brakes, brakes good performance, loses heat fast The chuck adopts inner expansion type or teeth type, reduce the destruction of the paper core. saving paper.
Machine performance: * Digital display system of paper cutter adopts microcomputer technology; * The paper cutting machine adopts LCD to display cutting data; * Show the dimensions of the front blade and the back blade; * The data resolution of paper cutter reaches 0.05mm. Technical Parameter: Model:SQZK115GA20 Max.Cutting Width:115cm Max.Cutting Length:115cm Max.Cutting Height:165mm Min.Cutting Size(without false clamp plate):30mm Min.Cutting Size(with false clamp plate):90mm Front Table Length:71.5cm Max.Clamp Pressure:40000N Max.Cutting Speed:43 time/min Main Motor:4KW Net Weight:3700Kg Gross Weight:4100Kg Packing Size(L*W*H):285*190*210cm.
Design 1)gb/t19519-2004 Iec61952, ansi 2)10kv, 115kv, 161kv, 230kv, 252kv¡.. 3)self-refined silicone rubber with imported raw material from dor corning co. Usa, fumed silica is imported from cabot co. In the usa and wacker co. In germany. 4)weathershed silicon-rubber sheds are the feature of taiguang technology. 5)made of ecr core 6)advanced compressing technique of metal end fittings Performance: Excellent electrical insulation properties and restoration of insulator performance High mechanical strength Good features of light weight, self cleaning, easy to install, anti-aging. Good resistance to soiling and flashover Hydrophobicity of sheds meets class hc1. We can make long rod suspension composite insulator, line post composite insulator, interphase composite spacer, pin composite insulator, electric railway composite insulator, etc. Wooden case/barrel.
MELEC has products range including Lugs & Connectors, ABC Accessories (IPC connectors, Dend End Clamp, Suspension Clamp.....), and Heat Shrink Accessories, and new item of Cold Shrink Accessories will come to market soon..Manufacturer
Spacer spool, in accordance with API 6A, have end connectors of the same size, rated working pressure and design. Spacer spool is wellhead sections which have no provision for suspension of tubular members and which may have no provision for sealing of tubular members.We manufacture the spacer spool in all sizes and pressure ratings suitable for Well Head extension, B.O.P. spacing, and Choke,Kill,and Production Manifold applications. spacer spool usually has the same nominal end connections. spacer spool identification consists of naming each end connection and the overall length (outside of end connection face to outside of end connection face). Characters: 1)Made from high-strength alloy and processed specially with heating treatment. 2)Designed and manufactured with reference to API 6A technical specifications. 3)Fit for Hydrogen sulfide H2S resistant service, manufactured with reference to NACEMR-0175 technical specifications. 4)Top & bottom connections and outlets per customer design requirements by either flanged or clamp connections. 5)All steel tanks are welded with stainless steel for long-term anti-corrosion. 6)Used for high-pressure drilling, in conjunction with flat valve for preventing blowout and connecting BOP.
Lightcarbon 27.5" 650b dual suspension mtb carbon frameset Model: ds169 Frame/seat clamp/headset W/t 1 1/8" - 1 1/2" asymmetric head tube W/t bsa/bb30 system available W/t post mounted disc brake system W/o sticker& painting Sizes: 16/18/20" Rear travel:108mm Seat post size:31.6mm Available in axle--through type(142*12mm) Tech specification: 1. Full hand-wrapped and monocoque carbon Structured; 2.Using the t700 carbon fiber from toray/japan; 3. Moulding in one time at agglutination position so that it can obtain more Capability and avoid needless broken; 4. Stairways pattern of agglutination, enlarging the agglutination surface and Enhancing the agglutination basis; 5.The double-mould anti-wrinkle production technology: to use a kind of eps Foamas the inner mould---the inner mould can make a smooth surface on the Inside offrame tubing----the smooth surface provides extra stability and higher Production quality----higher stiffness and rigidity, less weight. Standard carton packing
Sumip luminaries are available in totally enclosed grp housing suitable for use in non hazardous, dusty, humid & corrosive atmosphere prevailing in chemical, fertilizer, cement, rayon plants, and also industries/power plants located in coastal areas. Construction The luminaire housing is hot press molded glass reinforced plastic (grp). Glass Wellglass - heat resistance glass is provided with synthetic rubber gasket. Highbay/ mediumbay - teflon glass with rubber gasket provided. Retaining frame/ wire guard Strong stainless steel wire guard is provided to hold & protect the well glass. Holder Ceramic es or bc lamp holders are provided as per customer requirement of high grade quality. Ballast & igniter & capacitor For integral type luminaries heavy duty copper wound ballast, capacitor & igniter where ever applicable, are fitted right above the lamp holder assembly. Entries One no 3/4" bs conduit entry is provided for incoming cable with brass/ polyamide cable gland with check nut. Hardware All hardware provided are ss 316. Suspension Frp coated eye bolt is provided on top with good quality grommet to absorb the vibration. Alternatively ss 316 clamps can also be provided.
CIMC produces 4 axles tipper trailer is the ideal equipment to transport for carrying sand crush stone rock and salt material. CIMC 12 wheel tipper trailer are equipped with HYVA cylinder, which is more reliable and more safety, all key parts of dump trailer are from famous brands boty at home and aboard.We can supply 2 axles, 3 axles, 4 axles tipper semi trailer, which loading capacity from 40-ton 80 ton for customer specific requirements. Competitive Advantage- CIMC hydraulic tipping trailer 1.Frame body Q345B high strength structure steel, automatic submerged arc welding throughout beams, and other cross-section main stringers structure for optimum carrying effect. 2.Well-known brand axles, suspension systems, high performance, and reliable to use, to ensure the good performance of the vehicle. 3.Full braking and electrical systems at home and abroad in accordance with ISO standard, optional ABS system, braking, lighting is absolutely safe and reliable. 4.We supply tipper semi-trailers with multiple customization options. Specification- CIMC hydraulic tipping trailer Bran: CIMC hydraulic tipping trailer Model: U -model Axle: 4 axle,Fuwa axle Hydraulic system: HYVA cylinder Suspension: Mechanical suspension Kingpin: 50#, 90# Landing gear: Jost Braking system: WABCO Tire: 11.00R20, optional
Machine performance: Knife-seat guiding structure with sliding block type, cam type for adjusting-knife mechanism. Clamp press paper stack through hydraulic system, the spring re-position. Worm gear drive mechanism, hydraulic clutch, mechanical brake. WESSEL hydraulic system from Germany (optional), Italy oil pump. Switzerland ABB main motor(optional). One-piece, slotless and chrome-plated cast iron work table is sturdy and easy to maintain. Import ball screw with double linear guides to drive backgauge. Whole sealing safety guard for rear work table (optional). Germany LEUZE infrared protection device(optional). Main electronic units are from French TE and Japanese ORMON famous international brands. Technical Parameter: Model:SQZK137GM20 Max.Cutting Width:137cm Max.Cutting Length:145cm Max.Cutting Height:165mm Min.Cutting Size(without false clamp plate):30mm Min.Cutting Size(with false clamp plate):90mm Front Table Length:73cm Max.Clamp Pressure:45000N Max.Cutting Speed:43time/min Main Motor:4KW Net Weight:4100Kg Gross Weight:4500Kg Packing Size(L*W*H):310*190*210cm.
Machine Performance: Knife-seat guiding structure with sliding block type, cam type for adjusting-knife mechanism. Clamp press paper stack through hydraulic system, the spring re-position. Worm gear drive mechanism, hydraulic clutch, mechanical brake. WESSEL hydraulic system from Germany (optional), Italy oil pump. Switzerland ABB main motor(optional). One-piece, slotless and chrome-plated cast iron work table is sturdy and easy to maintain. Import ball screw with double linear guides to drive backgauge. Whole sealing safety guard for rear work table (optional). Germany LEUZE infrared protection device(optional). Main electronic units are from French TE and Japanese ORMON famous international brands. Technical Parameter: Model:SQZK168GM20 Max.Cutting Width:168cm Max.Cutting Length:168cm Max.Cutting Height:165mm Min.Cutting Size(without false clamp plate):30mm Min.Cutting Size(with false clamp plate):90mm Front Table Length:75cm Max.Clamp Pressure:50000N Max.Cutting Speed:42time/min Main Motor:8.5KW Net Weight:6200Kg
Machine performance: * Clamp press paper stack through hydraulic system, the spring re-position; * Worm gear drive mechanism, hydraulic clutch, mechanical brake; * Hydraulic system adopts Germany advanced technology, the hydraulic units are ISO approved; * One-piece, slotless and chrome-plated cast iron work table is sturdy and easy to maintain; * Import ball screw with double linear guides to drive backgauge; * High safety infrared protection device according to CE standard; * Main electronic units are from French TE and Japanese ORMON famous international brands; * Whole sealing safety guard for rear work table (optional). Technical Parameter: Model:SQZK115GA20 Max.Cutting Width:115cm Max.Cutting Length:115cm Max.Cutting Height:165mm Min.Cutting Size(without false clamp plate):30mm Min.Cutting Size(with false clamp plate):90mm Front Table Length:71.5cm Max.Clamp Pressure:40000N Max.Cutting Speed:43 time/min Main Motor:4KW Net Weight:3700Kg Gross Weight:4100Kg Packing Size(L*W*H):285*190*210cm
Comfort Foklift use of advanced HumanComputer Engineering Technology, Engine suspension damping devices, drive axle flexibility to connect, configuration low input torque steering, made it more easy to turn in situ; Adjustable steering wheel can adjust according to the operating environment situation shape of operator will not fell fatigue under longtime working Wide leg space make operator more comfortable Suspension design of high-intensity whole hood, built-in advanced sound-absorbing insulation materials. Reasonably stable low center of gravity Computer simulated the most reasonable low center of gravity, and use of high-strength steel to weld the body of the forklift, ensure the reliability of transportation. Security Lifting system gantry wide field of vision, dramatically improved the vision of drivers, to make sure the safety and speed of operation. Pipeline system provided a safety device, even if the pipeline ruptured, door frame will not be out of control. Cooling system Using large-capacity copper water tanks, international advanced cooling technology, to ensure that the vehicle has good heat dissipation. Electrical System Using the latest technology of the harness and waterproof plug-ins , multi-fuse fuse layout, greatly enhanced the safety and stability of circuit system. Diesel Forklift 2.0T-2.5T Performance
The 2020 Scott Gambler 910 29" Full Suspension Mountain Bike was designed for one thing and one thing only, pure, unadulterated speed. We made it to get you to take lines you'd never thought imaginable, to make you want to go to the bathroom before your race run - twice. We made it so that when you drop out of the start gate, the only aspect holding you back will be, well, you. Taking years of racing development and mixing it with our carbon expertise, this bike is our answer to the needs of white-knuckle downhill racing Key Features: Gambler HMX Carbon-Alloy Frame FOX 40 Performance Elite 203mm Fork FOX DH X2 200mm Shock SRAM GX DH 7 Speed SRAM Code R disc brakes Maxxis Assegai 2.5" DH Tires Sell 2020 Scott Gambler 910 29" Full Suspension Mountain Bike From Geracycles Is 100% safe,because buying products on Geracycles provides A 100% money back guarantee.Geracycles location: Jl.Perintis Kemerdekaan No.17 B Medan Payment terms : Western Union, Bank Transfer, Money Gram Delivery information: FedEX, DHL, UPS, Cargo Company. Delivery time : 3 - 5 Days Delivery port : Kualanamu International Airport
Features: Ceiling and Suspended Lamps, general illumination Installation & maintenance: suspension wire, suspender or ceiling mounting, generally we provide 1.0m electrical wire & suspension wires and they can be customized in different length accordance with customerí»s requirement. Product description: Terse & generous appearance design with elegant. Lamp-body adopts extruded forming aluminum alloy(6063). Can be connected in linear rows for use with the accessories along with the lamp. Using PMMA diffuser with symmetrical light distribution, can eliminate glare, the illuminating performance is very good. Electronic ballast: XIONGYU, OSRAM, PHILIPS, HONGLIDA Applicable for office building, large shopping mall, teaching room, library, airport, waiting room etc.. Model L*W*H(mm) Body Material Color MX607-3*35W 1500*265*66 Aluminum alloy Silver MX607-3*28W 1200*265*66 Aluminum alloy Silver MX607-2*35W 1500*172*66 Aluminum alloy Silver MX607-2*28W 1200*172*66 Aluminum alloy Silver MX607-4*14W 605*605*66 Aluminum alloy Silver Carton
Mic suspension plastic This kit includes:- Elastic frames for microphones until 2 cm diameters Tripod connection 3/8( for assembly at tone hinge / tripod (vertical assembly possible) Handle with grip. Features:- Angle of the basket through the joint is freely adjustable. Wind protection basket is removable. Flexible and stiff plastic skeleton in the wind basket in contrast to other wind baskets. Suitable for microphones for a length of: 22 cm (max. Also 24 cm) Max. Diameters 2 cm Comparably with sennheiser mzw / rycote ws3 wj3 / ambient Two of the worst problems that effects location sound recording are wind noise and rumble. Handling noise Wind noise is that blast of distortion and audio breakup caused from wind physically striking the sensitive diaphragm of the microphone capsule. For example sound when someone blows directly into a microphone. This wind noise can be prevented. That's what a windscreen does. Another reason to always use a windscreen is to physically protect the microphone from dust and accidental impact The use of a blimp screen is very effective because it tends to disperse the oncoming wind, thus reducing velocity but also eliminating the acoustic noise generated by high wind physically striking the outer shell of the blimp. Handling shocks Rumble can be defined as unwanted vibrations transmitted through objects into the mic capsule itself. Examples of rumble include ground or floor vibrations caused by nearby traffic, heavy footsteps and building/structural vibrations. Solution:- the solution to rumble lies in isolating the microphone from these vibrations by some means of free-floating suspension which is the role of a good shockmount. Shockmounts are featured microphone clamps. Weight - approx. 2 kg with packing
TEST BENCHES FOR VALVES Paskals designs, manufactures and delivers valve test units for pressure testing any type of Gate, Globe, Plug, Ball, Check, Safety and Butterfly valve according to all international test standards. Capabilities: Range DN10 2200 mm. / ¨ù - 86. Horizontal (stem vertical), vertical. (Stem horizontal) or tilting clamping system Clamping on the inlet flange, either flanges or (proportional clamping) between the clamping tables. 1 2000 tons of clamping force. With no or limited linear force on the valve body. Test pressure range: from vacuum up to 2000 bar / 30,000 PSI. Test medium: Liquid, compressed air, Nitrogen, Helium or Hydrogen. Standard Features: Computer registration system. Full automatic operation system. Testing one or a complete series of valves. Automatic open close action. Valve performance testing, considering; measuring of the stroke measuring, open/close time and torque measuring. Stainless tubing. Fugitive emission and cryogenic test facilities on requirement. Tests include: Shell test - pressure inside the assembled valve to 1.5 times working pressure. Back seat test - pressure inside with seat fully opened and closed to 1. 1 times working pressure. High pressure closure test -pressure applied to each side of the closed valve to 1. 1 times working pressure. Low pressure closure test - same as high pressure but with air at 100 psi (7 bar), detected by air bubbles in a water column or in laser bubble counter. Relief valve test - opening pressure using a ¡¯Pop¡¯ test and to 90-95% of set pressure.
Glass lined reactor, jacketed, 50L-80000L capacity, two pieces type (i.e. FK, open type) and one piece type ( i.e. FF, closed type), with good anti-corrosion performance widely to be used in the reaction, neutralization, and polymerization etc process: 1. The detailed assembling of our Glass lined reactor: (1) Electric Motor: Explosion-proof, Ordinary type; (2) Reducer(i.e.gear box): Cycloidal-pin wheel type, Spiral bevel gear type, Helical gear type; (3) Seal type: Packing seal, Mechanical Seal (single type, double type); (4) Agitator: Frame type, Anchor type, Impeller type, Paddle type, combination type; (5) Thermometer Pocket: A type (Straight); B type (Slant), C type ( Slant with Wing); (6) Bottom discharge Valve: Upper extension type, 2. The technical performance of our Glass lined reactor: (1)The working pressure: Inside the vessel: less than or equal to 1.0Mpa (for Packing seal: less than or equal to 0.2Mpa; for Single mechanical seal: less than or equal to 0.4Mpa, for Double mechanical seal: less than or equal to1.0Mpa); Inside the jacket: less than or equal to 0.6Mpa; (2) The working temperature: from -20 degree centigrade to 200 Celsius degree, the cooling shock: 110 Celsius degree, the thermal shock: 120 Celsius degree; (3) The Glass-lining thickness: 0.8-2.0mm; (4) The high Voltage-test to the Glass-lining: 20KV. (5) Nonstick: the smooth and clean glass-lining surface is nonstick to the materials. (6) Anti-corrosion performance: suitable for all kinds of organic or inorganic acids, organic solvents and weak alkaline etc. Besides Glass lined reactor, we also make Glass lined storage tank 200L-50000L, distiller 300L-6000L, condenser and dryer etc, certified by ISO900 and as one world class manufacturer & supplier of Glass lined equipments in china, we promise our products in high quality with favorable price and excellent service, select us, select trust, please contact us for more details, thanks.
Quick Details Customized support:OEM Place of Origin:Sichuan, China Brand Name:WOCO Material:Tungsten Carbide Dimensions: 15*5.1*0.65mm Grade:YG6X TRS: 1700N/MM2 Hardness: 92HRA Density:14.9g/cm3 Grain size:1. m Application:for Surgical Needle Holders and Forceps Surgical forceps or needle holder forceps made of stainless steel, with cemented carbide inserts on the head. According to different purposes, there are many specifications and models. Has good clamping performance and corrosion resistance. Mainly used for holding needles and sutures during surgery. Note: Other specification can be made upon customer's requirements.
