1. Low noise, due to the helical suction and discharge, the blower air flow in and out according to the direction of spiral line, all these prevent the pulse noise and vibration. What's more, by using the Impedance complex muffler, the noise of our blowers are further reduced.
2. High volume and anti-heat efficiency, so it is energy-saving. The blower rotor adopted the advanced Composite curve, the meshing is more reasonable, and further increases the volume efficiency.
3. Stable performance. The blower rotor, casing, wall panels, shaft and other key components are all produced by the advanced digital-control processing equipment thus make the interchangeability of parts and components increased.
4. Low vibration. Although the rotor has been processed precisely, and are all in balancing condition, we still adopted the high precision balancing equipment and grinding machine to make it more balance. Therefore, the blowers are almost no vibration.
5. With high precise and hardness Synchronization gear, we not only extension blowers life, but also reduce its noise.
AirMMax roots blower is three lobe type roots blower with pressure reaching up to 150kpa in single stage roots blower and pressure reaching up to 200kpa in double stage roots blower, air capacity reach up to 30000m3/hour, which cover most water treatment plant, sewage treatment plant and effluent treatment plant in industrial and municipal wastewater treatment plant. Roots blower inculds: blower body motor , base , inlet sliencer, outlet sliencer, safety valve, pressure gauge, check valve, flexible joint, belt cover, bolts&nuts
Rotary blower structure and working principle: Blower pressure range:0.1-0.5kgf/cm2 Rotary blower main components: Rotary blower with compact structure, mainly consist by the following six components:motor, air transporter, blower body, air chamber, base (and fuel tank), drip nozzle Application of rotary blower: 1.Water treatment aeration aeration 2.Hospital, laboratory aeration of sewage stirred 3.Vacuum feed of printing industry 4.Electroplating tanks, agitated aeration of industrial waste water 5.Plastic welding, air supply of gas supply 6.Spraying of burners, glass industry and others Characteristic of rotary blower: 1.Small size, large volume of air, low noise, energy saving (rotary air blower uses the principle of operating compressed air, although the volume is small, but the air volume is large, energy saving, quiet operation is other forms of fans can not match. 2.Smooth operation, easy installation 3.Excellent material, clever structure, high performance (rotary blower adopts all high-quality materials, compact structure, durable, high performance, long-term use less. 4. Maintenance is simple, less failure, long life (low speed, wear, long life.
Three leaves roots blower : **structure diagram of three leaves roots blower: **characteristics of three leaves roots blower: 1.As a result of the use of three-leaves rotors and a box with a spiral, so the noise vibration of the roots blower is small. 2.Impeller and shaft as a whole structure, and no impeller wear, the performance of roots blower lasting unchanged, can long-term continuous operation. 3.High speed and high efficiency, and the structure is very compact. 4.Simple structure, due to adopt a special bearing, superior durability, 5.Model complete, can choose according to use selection. **application of three roots blower: The roots blower is used for electricity, mining, chemical metallurgy, environmental protection, light industrial building materials, flour pneumatic conveying aquaculture **the company strength of fengyuan: Fengyuan machinery is a manufacturer and supplier of producing roots blower, of which the key parts are processed and made precisionly by cnc processing center and special equipment . Main products are fsr, fr, ftr series roots blower, multi - stage centrifugal roots blower, single stage high speed blower, air high-speed centrifugal roots blower and fh series rotary blower, totally 7 series 200 kinds of products. Company covers an area of 35, 000 square meters, with senior technical staff of more than 30 people, more than 5800 million in fixed assets. We have more than 10 years of experience in blower designing and processing, and have got several national patents.Which enforce the connection with multiple academies, and build a cooperation of science and technology. In domestic sales markets, there are mroe than 20 provinces and cities, in foreign sale markets, the products have been sold to many countries , like southeast asia, thailand, malaysia, bangladesh.Vietnam, myanmar, india, pakistan, russia, brazil, south africa...…
Twin lobe roots blower Brief introduction of twin lobe roots blower: Twin lobe roots blower, which sets roots blowers, motors, air filters, inlet and outlet muffler, check valve, safety valve, pressure gauges, shock absorbers, flexible joints, base and other components in one package supply. Application of twin lobe roots blower: Widely used for sewage treatment, aquaculture, pneumatic conveying, cement, chemicals, foundry, flour and other national economic sectors. Twin lobe roots blower annexes include: Universal base, belt cover, blower belt pulley, motor pulley, v-belt, safety valve, pressure gauge, inlet silencer, outlet muffler, anchor bolts, check valve, flexible joints, gear oil. After sales-service : 1.Product quality assurance for one year 2.Providing training and maintenance operations personnel for customers, timely and convenient to provide users with accessories. 3.Providing telephone technology support for customers .
Counterflow cooling clover roots blower for aeration: Welcome to buy counterflow cooling clover roots blower for aeration from fengyuan, which is one of the best counterflow cooling clover roots blower, backwash roots blower manufacturers and suppliers in china. Characteristics of counterflow cooling clover roots blower 1.Adopting the main and auxiliary tank lubrication according to the situation , not to make lubrication more reliable, and to solve the many problems of grease lubrication, effectively improve the bearing life. 2.Seal structure is reasonable, oil and gas can not enter the case, the output of the gas clean, non-oil and gas. 3.Each blower should be tested in strict accordance with national standards , commissioning qualified to complete machine assembly, to ensure the quality of the blower before leaving the factory. 4.Zhangqiu fengyuan counterflow cooling clover roots blower casting resin sand technology, quality is fully guaranteed. 5.Counterflow cooling clover roots blower chassis, wall panels from high-precision digital coordinate boring machine processing, high precision, quality and stability. Part parameter of counterflow cooling clover roots blower Product advantages of counterflow cooling clover roots blower 1.The product easy to maintain and maintain. 2. The product has low noise, easy maintenance and other advantages of late. 3. Fan compact and reasonable, covers an area of small. 4. With low noise, economical and durable, no lubrication, long life, good dynamic balance. Customers of fengyuan machinery:
Pneumatic conveying system blower : **structure diagram of pneumatic conveying blower: **characteristics of pneumatic conveying blower: 1.As a result of the use of three-leaves rotors and a box with a spiral, so the noise vibration of the roots blower is small. 2.Impeller and shaft as a whole structure, and no impeller wear, the performance of roots blower lasting unchanged, can long-term continuous operation. 3.High speed and high efficiency, and the structure is very compact. 4.Simple structure, due to adopt a special bearing, superior durability, 5.Model complete, can choose according to use selection. **application of pneumatic conveying blower: The pneumatic conveying blower is used for electricity, mining, chemical metallurgy, environmental protection, light industrial building materials, flour pneumatic conveying aquaculture **the company strength of fengyuan: Fengyuan machinery is a manufacturer and supplier of producing roots blower, of which the key parts are processed and made precisionly by cnc processing center and special equipment . Main products are fsr, fr, ftr series roots blower, multi - stage centrifugal roots blower, single stage high speed blower, air high-speed centrifugal roots blower and fh series rotary blower, totally 7 series 200 kinds of products. Company covers an area of 35, 000 square meters, with senior technical staff of more than 30 people, more than 5800 million in fixed assets. We have more than 10 years of experience in blower designing and processing, and have got several national patents.Which enforce the connection with multiple academies, and build a cooperation of science and technology. In domestic sales markets, there are mroe than 20 provinces and cities, in foreign sale markets, the products have been sold to many countries , like southeast asia, thailand, malaysia, bangladesh.Vietnam, myanmar, india, pakistan, russia, brazil, south africa...…
Roots vacuum pump (referred to as: roots pump) refers to the pump is equipped with two opposite direction synchronous rotation of the leaf rotor, the rotor, the rotor and the pump shell wall has a small gap between the non-contact with a variable capacity vacuum pump. Roots vacuum pump animation: Application of roots vacuum pump : Roots vacuum pump, widely used in petroleum, chemical, plastics, pesticides, steam turbine rotor balancing, aerospace space simulation devices such as petroleum, chemical, metallurgy, textile and other industries.The accessories for the vacuum pump is vavuum pump muffler , which can deal with the noise. Structural features of roots vacuum pump: (1)within a wide range of pressure has a larger pumping speed; (2) the rotor has good geometric symmetry, so the vibration is small, smooth operation.There are gaps between the rotor and the rotor and the shell, it needs no lubrication, friction loss is small, can greatly reduce the drive power, which can achieve a higher turn Speed; (3) the pump cavity without oil seal and lubrication, it can reduce the oil vapor, which will pollut the vacuum system; (4) pump cavity without compression, no exhaust valve. The structure is simple, compact, Characteristics of roots vacuum pump 1.Start fast, 2.Less power consumption, 3.Low operation and maintenance costs, 4.Pumping speed, high efficiency
Supplier: Roots blower, roots vacuum pump, rotary blowr, three lobed roots blower,turbo blower,centrifugal blower
Supplier: Three lobe roots blowers, twin lobe blower, high speed turbo blower, water ring vacuum pump