Reamer Shoe Reamer Shoe is designed specifically to be installed on Casing or Liner and Screen where operators have concerns about potentially difficult wellbore conditions such as, swelling shale's, ledges and washed out areas of wellbore, post drilling and prior to running casing. The aluminum eccentric guide nose climbs ledges and negotiates obstructions while the cutting structure reams out tight spots or obstruction in the wellbore. Compatible with all casing and liner hanger assemblies, our Reamer Shoe provides highly effective protection- against unexpected or anticipated casing and liner running problems, and has been specifically designed for potentially difficult wellbore conditions such as swelling shales, ledges and washed out areas of wellbore. The high strength profiled alloy nose will anchor even in uncured cement to facilitate ease of drill out. The aluminum eccentric nose is easily drilled with both PDC and Rock bits. The chip breaker holes in the nose assembly are designed to create small aluminum chips to avoid â??bird nestingâ?� on the bit. Benefits to customers include improved drill out times without compromising the reaming capabilities, a reduction in NPT and increased opportunities to reach TD. Zhongshi is specialized in produce float equipment, reamer shoe, double valve float collar, stab-in float collar float shoe and non-rot float collar float shoe etc, Our products are very popular, if you are interested in our products, please contact us as soon as possible.
Introduction of WZ30-18 Excavators Backhoe Loaders 1, WZ30-18 Excavators Backhoe Loaders adopt increased cab with security glass, bright and spacious. 2, Operation table: easy to check water temperature, oil temperature, current, 3, Adopts famous brand hydraulic part, dual pump converging power; excavating, loading hydraulic power for each other. 4, Adopts suspension shock absorber-360 � rotate seat, with seat belts, and improve driver comfort and safety. 5, Hinge type front and rear frames, small turning radius, full hydraulic steering, easy and convenient operation. Part 6, mining-led operation, light manipulation, positioning accuracy. 7, Fully equipped with all the features of small excavators and loaders. 8, Equipped with a variety of options to meet the needs of different users. 9, Reset the tap unit and the wings legs, broken rock, and when you dig deeper than other forms of mining equipment with greater stability. Parameters: Operating weight 4800kg Capacity of bucket 0.3m3 System working pressure 20mpa Engine 4102 Rated power 51kw Rated speed 2400r/min Max. excavating height 5000mm Max. excavating depth 3600mm Max. excavating radius 5000mm Max. excavating Width 550mm Capacity of bucket 1.0 m3 Rated load 1800kg Dumping height 3600mm Dumping reach 950mm Min. turning radius 4300mm Max. flux 50ml/r Max. Tractive force 38KN Max. breakout force 49KN Max. digging force 44KN Grade ability 45% Max. traveling speed(forward, backward) �25km/h, 25km/h Ground clearance 220mm Wheel base 2290mm Tread 1500mm Drive type 4WD Tyre 20.5/70-16 Size(L*W*H) 6900mm*2080mm*2900mm
Product Description Henan Daye Metallurgy Casting Material Co., Ltd. is a professional manufacturer engaged in the research, development, production, sale and service of slag remover, carbon additive, riser insulation agent, and perlite series products. As a industry frontrunner specializing in metallurgical slag remover production in China, our product â??Daye Brandâ?�R-2, R-3, R-4 & R-5 can replace similar imported products completely. Product Name Perlite casting slag sand for foundry Material Mineral Color Canary yellow Standard GB/T 19001-2008 idt ISO 9001: 2008 Grade Daye R-2 Brade Rock Granularity 8-18 mesh Used Metallurgical Casting Products Show The product slag remover has occupied almost 60% market in China, which are selling well in all cities and provinces around China, and have ever been exported to the USA, Australia, Indonesia, Vietnam and South Korea. The good performance of slag removing and metal purification is highly recognized and praised by different customers at home and abroad Packing & Delivery Packaging & Delivery Packaging Details 1) Net weight 25kg per unit (plastic woven bag) 2) As customer's request. Delivery Time 10-20 days according to the quantity Our Certifications FAQ Q: Are you trading company or manufacturer ? A: We are factory. Q: How long is your delivery time? A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity. Q: Do you provide samples ? is it free or extra ? A: Yes, we could offer the sample for free charge but do not pay the cost of freight. Q: What is your terms of payment ? A: Payment=1000USD, 30% T/T in advance ,balance before shippment.
Description The centrifugal concentrator, a kind of gravity separation equipment, is suitable for the separation of heavy medium minerals that have enough specific gravity differences. STLB concentrator is kind centrifugal concentration equipment. It can be used not only for placer gold mining, but also for hard rock mining to recover the natural gold, replacing amalgamation. It is also used to recover gold from the old tailings. Since 1985, three models have been developed. Application shows that the recovery can be as high as 99%, especially for the case in recovering the natural gold in lode ore with 65% of the ore having a milling size of 0.074mm, the recovery for the natural gold is expected up to 98%. For those natural gold of 0.004mm in particle size, the recovery is 97%. The cleaning up cycle is 1~4 hours. And the upgrade ratio is up to 1,000 times. Working Principle Water jacket centrifugal concentrator is forced by centrifugal force increases mineral centrifugal acceleration, the minerals in the centrifuge spins a few times to get the equivalent in gravity state, then the proportion of mineral difference is magnified several times, Together with recoil mineral water to prevent compaction, thereby fine, mineral beneficiation achieve good results. Main models: D20 with 1-2t/h capacity D30 with 2-7t/h capacity D60 with 15-30t/h capacity D80 with 30-70t/h capacity D100 with 60-100t/h capacity
Nickel metals, products is a distribution center Located in houston, texas. It was Primarily founded for the sole purpose of providing alloys to the oil and Gas, metals, chemical, and pharmaceutical industries at a very competitive Price. The company accomplishes this goal by purchasing directly from the Mill and passing down the savings to the customer. .We do business all over the world with registered documents of Operation, we belong in the usa stock market, we are the fastest and Reliable, purity: 99.9% min grade: grade nickel metals int crystal, copper mine Product type: Crystal image, natural copper mine stone Regional feature: Huston texas Place of origin:africa(senegal, south africa, cameroon) Brand name: Nickel metals :copper mine Item Description 1.Material 100% natural rock crystal 2.Color Mixed color 3.Size 12cm/10cm 4.Weight 210g depending on customers order 5.Moq 1 Metric tone 6.Deliver time 1)sample order:3days after receipt of payment 2)bulk order:7-15days after receipt of payment 7.Payment 1)l/c;t/t;paypal;west union; moneygram etc 2)sample order:100% payment before shipment 3)bulk order:50% deposit balance before shipment 8.Packaging 1) bubble paper inside and hard corrugated box or wooden case outside 2) according to customers' requirement
Vane air motor description: With compressed air as actuating medium, vane air motor makes use of the expansion of compressed gases; convert the pressure energy into mechanical energy. Air motor has simple structure, small size, light weight, high horsepower, and easy to be operated and maintained. It also has the feature of proof water, fire, moisture and explosion. It can work in humid, high temperatures, high dust and other proof working environment. Besides mine, rock drilling and loading, it was also widely used for ships, metallurgical, chemical, petrochemical, volatile atmosphere, paper and other industries. Vane air motor features: 1. Great for harsh environments: it does not build up heat or sparks make air motors ideal for use in flammable or explosive applications. 2. Intrinsically safe in hazardous environment, can work in humid, high temperatures, high dust and other proof working environment, for example: mines , petrochemical , volatile atmosphere, flammable or explosive applications. 3. These air motors can be coupled with gearboxes to increase torque and reduce speed. 4. Simple structure, small size, light weight, high horsepower, and easy to be operated and maintained. 5. Air motors can easily operate under conditions which are unfavorable electric, hydraulic, stepper and servo motors. Applications: Mixing equipment, conveyor drives, pump drives, food packaging, pharmaceutical packaging, Winches and hoist, hose reels, fiberglass choppers, tension devices, turntables, oil and gas Industry for air winches and mining equipment
Prathima areca plates are purely natural and having no other artificial additives or chemical ingredients so that it rocks with new trends in catering sector market. These plates are â??Natures Gift and better replacement of anti-environment plastics or polymers. Areca leaf plates are 100% biodegradable and compostable. These hygienic, non-odorous, non-toxic, light weight plates are made out of Areca leaf are environment friendly. In addition our areca nut leaf plates also handy, leak proof, light weight, strong natural leaf plates. This plates are used for serving hot and cold food as these can withstand extreme hot and cold temperatures. Further, these can be customized as per the specifications required our clients. We supply various sizes and shapes. Product Ranges: 1. Pizza Plates: 6 8 10 and 12. 2. Rectangle Deep Plates: 6x3 Recta deep, 6x5 Recta deep, and 9x6 Recta com plates 3. Rectangle Plates: 6x3 Recta plates, 6x5 Recta plates and 9x6 Recta plates. 4. Round Bowl: 5 Round Bowl 250ml, 6 Round Bowl 450 ml, and 8 Round bowl 700 ml. 5. Round Deep Plates: 6 Round Deep Plate, 8 Round Deep Plate, 10 Round Deep Plate and 12 Round Deep Plate. 6. Square Bowl: 5 Square Bowl 300 ml, 6 Square Bowl 600 ml and 8 Square bowl 700 ml. 7. Square Deep Plates: 3 Square Deep Plates, 6 Square Deep Plates, 8 Square Deep Plates and 10 Square Deep Plates 8. Square Plates: 3 Square Plates, 6 Square Plates, 8 Square Plates and 10 Square Plates
The spiral drill collars are made of 4145HMOD modified chromium-molybdenum alloy steel according to API Spec 7-1 . All threads can be phosphated,copperised or cold worked. All threads are machined with CNC Lathes-Double-Shouldered and a special thread, the max diameter of spiral drill collar is 14 inch. Out diamete: 3 7/8"~ 14"(inch) Depth of cut: 4.0 ~ 11.9 (mm) Length: 9150+150(mm) Standard size�?� for�?� drill collar Connection # OD ID L mm DF mm Bending strength ratio mm in mm In NC23-31 79.4 3 1/8 31.8 1 1/4 9150 76.2 2.57:1 NC26-35 88.9 3 1/2 38.1 1 1/2 9150 82.9 2.42:1 NC31-41 104.8 4 1/8 50.8 2 9150 or 9450 100.4 2.43:1 NC35-47 120.7 4 3/4 50.8 2 9150 or 9450 114.7 2.58:1 NC38-50 127.0 5 57.2 2 1/4 9150 or 9450 121.0 2.38:1 NC44-60 152.4 6 57.2 2 1/4 9150 or 9450 144.5 2.49:1 NC44-60 152.4 6 71.4 2 13/16 9150 or 9450 144.5 2.84:1 NC44-62 158.8 6 1/4 57.2 2 1/4 9150 or 9450 149.2 2.91:1 NC46-62 158.8 6 1/4 71.4 2 13/16 9150 or 9450 150.0 2.63:1 NC46-65 165.1 6 1/2 57.2 2 1/4 9150 or 9450 154.8 2.76:1 NC46-65 165.1 6 1/2 71.4 2 13/16 9150 or 9450 154.8 3.05:1 NC46-47 171.4 6 3/4 57.2 2 1/4 9150 or 9450 159.5 3.18:1 NC50-67 171.4 6 3/4 71.4 2 13/16 9150 or 9450 159.5 2.37:1 NC50-70 177.8 7 57.2 2 1/4 9150 or 9450 164.7 2.54:1 NC50-70 177.8 7 71.4 2 13/16 9150 or 9450 164.7 2.73:1 NC50-72 184.2 7 1/4 71.4 2 13/16 9150 or 9450 169.5 3.12:1 NC56-77 196.8 7 3/4 71.4 2 13/16 9150 or 9450 185.3 2.70:1 NC56-80 203.2 8 71.4 2 13/16 9150 or 9450 190.1 3.02:1 6 5/8 REG 209.6 8 1/4 71.4 2 13/16 9150 or 9450 195.7 2.93:1 NC61-90 228.6 9 71.4 2 13/16 9150 or 9450 212.7 3.17:1 7 5/8 REG 241.3 9 1/2 76.2 3 9150 or 9450 223.8 2.81:1 NC70-97 247.6 9 3/4 76.2 3 9150 or 9450 232.6 2.57:1 NC70-100 254.0 10 76.2 3 9150 or 9450 237.3 2.81:1 8 5/8REG 279.4 11 76.2 3 9150 or 9450 266.7 2.84:1 8 5/8REG 355.6 14 76.2 3 9150 or 9450 266.7 2.84:1
Material handling hoses that are used to convey abrasive media such as cement, screed, plaster, lime, chalk, animal feed, sand and self-compacting concrete. The liners are manufactured from a hard wearing, electrically conductive natural rubber that helps dissipate static build up. Construction: Inner Tube:Black high tensile and abrasion NR/BR synthetic rubber. Reinforcement: High tensile multiple textile cord. Cover:Black NR/SBR rubber, weather and abrasion resistant high tensile synthetic rubber. Working Pressure:Constant Pressure 20Bar /300psi Temperature Range:-20 +80 (-4 F 167 F) Application:Widely used to delivery the dry cement, pebble line, abrasive materials, etc. Suction and delivery hose for applications where abrasion resistance is the primary requirement : dry cement, sand, slurries, mud, gravel, seed or other abrasive materials.Lightweight and flexible suction and delivery hose for mud, slurry, bulk materials, sand, pebble or other abrasive materials.Discharge of sand, pebble lime or other highly abrasive dry materials.Conductive tube to ensure safe handling.Heavy-duty hose for sandblasting and transfer applications in shipyards, construction, steel mills or other high demanding service.Premium hose for conveying hot air from blower or compressor to tanks on dry bulk material carriers and on in-plant compressors to holding tanks.Hose for conveying hot air from blower or compressor to tanks on bulk dry material carriers.The rubber (SBR) version of this hose is well-suited for handling crushed rock, sand, small gravel, and powdered cement; it can also be used as a boom hose for catch basin clean out. The rubber hose of this group covers a wide area of applications.Tube Sand and Dry Cement, Powder Discharge Hose Made with a rubber blend and special static dissipating tube compound this hose is made to handle dry powders, dry cement, and other dry materials, this hose is a popular choice for sand/water mix applications on fracking sites. It is available in three sizes: 3/16 inch, 1/8 inch, or 1/4 inch. It is both weather and highly abrasion resistant. Feature: Mandrel extrusion technology Free OEM Color & Brand Service Packing as customer request
Material handling hoses that are used to convey abrasive media such as cement, screed, plaster, lime, chalk, animal feed, sand and self-compacting concrete. The liners are manufactured from a hard wearing, electrically conductive natural rubber that helps dissipate static build up. Construction: Inner Tube:Black high tensile and abrasion NR/BR synthetic rubber. Reinforcement: High tensile multiple textile cord with steel wire helix spiraled Cover:Black NR/SBR rubber, weather and abrasion resistant high tensile synthetic rubber. Working Pressure:Constant Pressure 10Bar /150psi Temperature Range:-20 +80 (-4 F 167 F) Application:Widely used to suction and discharge the dry cement, pebble line, abrasive materials, etc. Suction and delivery hose for applications where abrasion resistance is the primary requirement : dry cement, sand, slurries, mud, gravel, seed or other abrasive materials.Lightweight and flexible suction and delivery hose for mud, slurry, bulk materials, sand, pebble or other abrasive materials.Discharge of sand, pebble lime or other highly abrasive dry materials.Conductive tube to ensure safe handling.Heavy-duty hose for sandblasting and transfer applications in shipyards, construction, steel mills or other high demanding service.Premium hose for conveying hot air from blower or compressor to tanks on dry bulk material carriers and on in-plant compressors to holding tanks.Hose for conveying hot air from blower or compressor to tanks on bulk dry material carriers.The rubber (SBR) version of this hose is well-suited for handling crushed rock, sand, small gravel, and powdered cement; it can also be used as a boom hose for catch basin clean out. The rubber hose of this group covers a wide area of applications.Tube Sand and Dry Cement, Powder Discharge Hose Made with a rubber blend and special static dissipating tube compound this hose is made to handle dry powders, dry cement, and other dry materials, this hose is a popular choice for sand/water mix applications on fracking sites. It is available in three sizes: 3/16 inch, 1/8 inch, or 1/4 inch. It is both weather and highly abrasion resistant. Feature: Mandrel extrusion technology Free OEM Color & Brand Service Packing as customer request
Material handling hoses that are used to convey abrasive media such as cement, screed, plaster, lime, chalk, animal feed, sand, and self-compacting concrete. The liners are manufactured from a hard-wearing, electrically conductive natural rubber that helps dissipate static build up. Construction: Inner Tube:Black high tensile and abrasion NR/BR synthetic rubber. Reinforcement: High tensile multiple textile cord with steel wire helix spiraled Cover:Black NR/SBR rubber, weather and abrasion resistant high tensile synthetic rubber. Working Pressure:Constant Pressure 20Bar /300psi Temperature Range:-20 +80 (-4 F 67 F) Application:Widely used to suction and discharge the dry cement, pebble line, abrasive materials, etc. Suction and delivery hose for applications where abrasion resistance is the primary requirement : dry cement, sand, slurries, mud, gravel, seed or other abrasive materials.Lightweight and flexible suction and delivery hose for mud, slurry, bulk materials, sand, pebble or other abrasive materials.Discharge of sand, pebble lime or other highly abrasive dry materials.Conductive tube to ensure safe handling.Heavy-duty hose for sandblasting and transfer applications in shipyards, construction, steel mills or other high demanding service.Premium hose for conveying hot air from blower or compressor to tanks on dry bulk material carriers and on in-plant compressors to holding tanks.Hose for conveying hot air from blower or compressor to tanks on bulk dry material carriers.The rubber (SBR) version of this hose is well-suited for handling crushed rock, sand, small gravel, and powdered cement; it can also be used as a boom hose for catch basin clean out. The rubber hose of this group covers a wide area of applications.Tube Sand and Dry Cement, Powder Discharge Hose Made with a rubber blend and special static dissipating tube compound this hose is made to handle dry powders, dry cement, and other dry materials, this hose is a popular choice for sand/water mix applications on fracking sites. It is available in three sizes: 3/16 inch, 1/8 inch, or 1/4 inch. It is both weather and highly abrasion resistant. Feature: Mandrel extrusion technology Free OEM Color & Brand Service Packing as customer request
This recommended practice covers minimum requirements for air brake hose assemblies made from reinforced elastomeric hose and suitable fittings for use in automotive air brake systems including flexible connections from frame to axle, tractor to trailer, trailer to trailer and other unshielded lines Standard: SAE J1402 /GB16897 -2010 Construction: Tube: EPDM Black synthetic rubber. Reinforcement: High strength synthetic fiber. Cover: Black, red and blue ASTM IRM903 oil-ozone- resistant synthetic rubber compound. Working Temperature: -40 to +120 Air Pressure Brake Hose Assembly Application: Used for hydraulic brake systems to transmit and contain the fluid pressure medium, which offer the force to the vehicle auto air brakes system. Features: The hoses are braided with fiber, and such very good performance as the following: good flexibility, bursting resistance, high tensile strength, low extensibility under pressure, ozone resistance, low-temperature and high-temperature resistance, with stable, safe and reliable braking effects. Air Brake Hose is recommended for air brake applications. Meets all DOT and SAE J1402A requirements. SAE J1402A air brake hose Tube: EPDM | REINFORCEMENT: PET | COVER: EPDM Exceptional weathering and ozone resistance 2-spiral polyester reinforcement Meets SAE J1402A dimensions Temperature range -40 F to 200 F (-40 C to 93 C) Rubber air brake is designed for compressed air brake systems on trucks and buses. This hose meets SAE J1402 specifications. Rubber air brake hose is typically used where it will be subject to gravel, rocks, oil, vibration, etc. whereas nylon air brake is typically routed inside the frame where it will not be subject to debris, vibration, etc. Our hose is a standard hose and is designed for use in very cold environments down to -54C (-65F). Applications: Flexible hose suitable for air brake systems. Tube: Synthetic rubber, black, smooth, oil resistant. Reinforcement: Synthetic cord. Cover: Synthetic rubber black, smooth, high temperature and ozone resistant. Standard: SAE J1402. Recommended for air brake hose, high temperature pressurized oil return lines and rotary oil/air compressor lines, engine and transmission coolant lines and lube oil lines. Meets or exceeds DOT FMVSS 106-74, SAE J1402 for air brake hose (4, 6, 8, 10). Not recommended for gasoline or diesel fuel applications.
Trimble Universal Total Stations lead the industry in accuracy, range and reliability for fine grading, paving, stockpile scanning and site measurements. The Trimble SPS730 and SPS930 Universal Total Stations provide five ways to measure with one instrument. Servo, Autolock, Robotic, Reflectorless and ATS Grade Control modes provide the ability to tackle any measurement, stakeout, reflectorless or grade control task on the jobsite â?? all from one instrument. Accuracy to Match Job Site Requirements The SPS930 provides 1 second horizontal and vertical angle accuracy for any precise measurement, stakeout or fine grading task. The SP730 provides 2 second vertical and 3 second horizontal angle accuracy to meet the needs of all but the highest precision measurement or stakeout functions on site. DR300 long-range reflectorless measurement The DR300 long range reflectorless measurement capability allows you to quickly and safely measure hard-toreach or unsafe places 300 meters away and beyond. There is no need to walk the surface with a target. Youâ??ll realize significant increases in productivity and safety when measuring stockpiles, profiling cuttings and rock faces. Trimble MultiTrack Technology Trimble MultiTrack technology locks on and tracks passive prisms for applications such as monitoring or control measurements and active targets for dynamic measurement, stakeout and grade control applications. Active targets provide enhanced dynamic tracking performance and guaranteed lock to the correct target, especially in dusty construction site conditions. Up to 16 unique channels of target identification can be used to differentiate survey crews and grade checkers from machine control operations, eliminating down time caused by unnecessary interference. Unmatched Dynamic Positioning Grade control for earthmoving and fine grading machinery requires an updated, highly accurate position delivered on a very frequent basis. The more data provided, the smoother the hydraulic control and the higher gear that the machine can operate in. The Trimble SPS730 and SPS930 instruments deliver an unmatched 20 hertz update rate combined with low latency, synchronized data measurements for unmatched machine performance. Combined with the Trimble MT900 active machine target they can operate at ranges up to 700 meters at /-45 degree slopes, in the highest gear and in the dustiest conditions at the same time delivering the smoothest and most accurate finish available. Repeatability in the accuracy of graded layers results in fewer passes, reduced fuel and maintenance, reduced rework not to mention material savings, time and associated cost benefits.
The Corten B steel sheet we offer is visible to customers in various industries, from basic tasks like sugar, paper, textiles, dairy products, and engineering to tasks that are far more complex than oil and gas. , Petrochemical, chemical and fertilizer, power and nuclear industries. Sai Steel & Engineering Co. pays attention to big stars in Corten steel plates. Interaction between B and Corten plate. Similarly, our claim accounts are now located in Saudi Arabia , Kuwait, Qatar, Oman, Yemen, United Arab Emirates, Iran, Turkey, Kazakhstan, Greece, Singapore, Thailand, Indonesia, Vietnam, South Africa , South America and lots of other countries/regions. Brazil. , India, Australia, Egypt. We are very happy together with your inquiry. We provide high-quality Corten B steel plates at reasonable prices. These Corten B steel plates are made from the very best quality dirty materials and are move ensure overall quality. These Corten B steel plates are often opened under tension, and their size and thickness can meet the wants of our customers. Sai Steel & Engineering Co. has extensive experience in saving professionals and using the foremost modern power grid. Provide durable weather-resistant steel plates and profiles for patrons everywhere the planet. If available, all Corten B steel plates are often cut consistent with the method requirements and therefore the size and shape shown within the chart. Our undisputed guarantee and continuous monitoring quality system monitors all work. Like all of our suppliers, the world's largest quality steel producer was discovered and shared at our safety meeting. What is corten b steel plate ? Corten B may be a steel belt that has got to meet all requirements for load-bearing and supporting structures. If you're conversant in the world marked by the brand, the fabric will form its own special protective layer. On an unusual level of realism, it absorbs the simplest layers before providing the steel below. Hard surfaces don't require the maximum amount help as possible, such as B. Spraying, which makes this material a limited insulation choice and is especially sensitive to other sorts of steel. This transformation is meaningless. an honest situation is that rock bottom of the structure is in touch with the bottom or is submerged under water to some extent.
Product Detailed Description: Crushed Limestone (10-17mm) Elevate Your Projects with Premium Crushed Limestone in the 10-17mm Size Range Discover the superior qualities of our Crushed Limestone (10-17mm), a versatile construction and landscaping material that offers durability, aesthetics, and versatility. This meticulously graded product is your key to success in a wide range of applications. Key Features: Optimal Size Range: Our Crushed Limestone in the 10-17mm size range is meticulously graded to ensure optimal performance. It strikes a balance between size and versatility, making it an ideal choice for various applications. Exceptional Durability: Renowned for its durability, our Crushed Limestone withstands heavy loads and challenging weather conditions, ensuring longevity in all your projects. It's perfect for pathways, driveways, and construction bases. Effective Drainage: The 10-17mm size range promotes efficient drainage, preventing water pooling and erosion. It's a top choice for drainage systems, French drains, and landscaping where water management is crucial. Aesthetic Appeal: The natural, earthy tones and textured surface of Crushed Limestone enhance the beauty of your landscape or construction project. Architects and designers appreciate its ability to complement various design styles effortlessly. Applications: Driveways and Pathways: Create stable, visually appealing driveways and pathways that endure daily wear and tear with ease. Construction Base: Use it as a robust and reliable base material for roads, parking lots, and building foundations, ensuring structural stability. Landscaping: Transform your outdoor space with stunning pathways, patios, and garden beds that blend beauty and functionality seamlessly. Efficient Drainage: Ensure effective water management in residential and commercial settings with its excellent drainage properties. Decorative Features: Enhance your landscape with the natural elegance of Crushed Limestone, ideal for rock gardens, accent features, and stone borders. Environmental Benefits: Our commitment to sustainability is reflected in our Crushed Limestone (10-17mm). Responsibly sourced, it reduces the environmental footprint associated with transportation. Furthermore, its natural composition ensures it doesn't release harmful substances into the environment, making it an environmentally friendly choice. In summary, our Crushed Limestone (10-17mm) offers the perfect blend of beauty, functionality, and reliability for your construction and landscaping projects. With durability that conquers the elements and aesthetics that enhance your space, it's time to elevate your projects with this timeless choice. Choose sustainability, choose elegance, choose Crushed Limestone (10-17mm).
Product Detailed Description: Crushed Limestone (4-10mm) Discover the Versatile Beauty of Crushed Limestone in the 4-10mm Size Range Elevate your construction and landscaping projects with our Crushed Limestone (4-10mm), a timeless and enduring choice that combines aesthetics, durability, and functionality. This versatile product promises to transform your outdoor spaces while standing the test of time. **Key Features:** 1. **Ideal Size Range:** Our Crushed Limestone in the 4-10mm size range strikes the perfect balance between compactness and versatility. It's adaptable to a wide range of applications, offering you flexibility in your projects. 2. **Built to Last:** Renowned for its durability, crushed limestone is your assurance of long-lasting performance, even in the harshest weather conditions. It can withstand heavy loads and environmental challenges, making it perfect for driveways, pathways, and construction foundations. 3. **Efficient Drainage:** The 4-10mm size range promotes efficient drainage, eliminating water pooling concerns. It's an excellent choice for drainage systems, French drains, and landscaping projects where water management is crucial. 4. **Aesthetic Charm:** The natural, earthy tones and textured surface of crushed limestone add a touch of rustic elegance to any landscape or construction project. Architects and designers adore its ability to complement various design styles seamlessly. **Applications:** - **Driveways and Walkways:** Create stable and visually appealing driveways and walkways that stand up to daily wear and tear. - **Construction Base:** Use it as a strong and reliable base material for roads, parking lots, and building foundations. - **Landscaping:** Transform your outdoor space with pathways, patios, and garden beds that exude beauty and functionality. - **Effective Drainage:** Ensure proper water management in residential and commercial applications with its excellent drainage properties. - **Decorative Elegance:** Enhance rock gardens, accent features, and stone borders with the natural beauty of crushed limestone. **Environmental Benefits:** Choosing Crushed Limestone (4-10mm) is not just a smart choice for your projects; it's a sustainable one too. This eco-friendly material is readily available, reducing the carbon footprint associated with transportation. It's sourced sustainably, promoting responsible mining practices. Moreover, limestone is chemically inert, ensuring it won't harm the environment. In summary, our Crushed Limestone (4-10mm) is your gateway to a world of beauty, functionality, and reliability for your construction and landscaping needs. With durability that endures the elements and aesthetics that please the eye, it's time to elevate your projects with this timeless choice. Choose sustainability, choose elegance, choose Crushed Limestone (4-10mm).
3/4 Stone chips aggregates, often referred to as 3/4-inch aggregates, are a type of construction aggregate characterized by their approximate size of three-fourths of an inch (20 mm aggregates) in diameter. These aggregates are commonly used in construction and various civil engineering applications. Here are some key details about 3/4 Stone chips aggregates: 1. Size: As the name suggests, 3/4 Stone chips aggregates have a particle size of roughly 3/4 of an inch in diameter. They are sometimes also referred to as 20 mm aggregates in metric units. 2. Composition: 3/4 Stone chips aggregates are typically made from crushed stone or naturally occurring stone materials, such as granite, limestone, trap rock, or gravel. The specific type of stone used can vary based on regional availability and project requirements. 3. Uses: These aggregates have a wide range of applications, including: Construction:3/4 Stone chips aggregates aggregates are commonly used as a key component in concrete mixes, asphalt mixes, and road construction. They provide stability and strength to these materials. Drainage: Their size and angular shape make them suitable for use in drainage systems, French drains, and other applications where effective drainage is needed. Landscaping: 3/4 Stone chips aggregates can be used in landscaping projects for pathways, decorative features, and as a base for retaining walls or pavers. Subbase: They are also used as a subbase material for foundations and roads, providing a stable foundation for construction. 4. Durability: 3/4 Stone chips aggregates are known for their durability and ability to withstand heavy loads and wear over time. They contribute to the overall strength and longevity of construction projects. 5. Installation: Proper installation techniques, such as spreading and compacting the aggregates to achieve the desired thickness and density, are essential to ensure their effectiveness in construction and drainage applications. 6. Cost: The cost of 3/4 Stone chips aggregates can vary depending on factors like location, the specific type of stone used, and local market conditions and the availability of aggregates supplier. They are generally cost-effective compared to other construction materials. In summary, 3/4 stone chips aggregates are a versatile and widely used construction material valued for their size consistency, durability, and suitability for various applications, 3/4 stone chips aggregates supplier are playing key factor to boot this business in Bangladesh.
DAQ-GP-CAM is a wireless time-lapse camera based on 4G or WiFi, which can take pictures at certain intervals and upload to FTP server, launched by Shanghai Data Acquisition IOT Technology Co., Ltd. It can be widely used to capture the data of instruments, and can also be used for photo capture and video surveillance in the fields of cultural relics, rock and soil, hydrology and water conservancy. This product supports WiFi/4G Ethernet access to the network, take photos regularly and upload the photos to the designated FTP server or store them in an SD card. With 4G wireless network card, it can be used in scenarios where there is no WiFi network outdoors. 2 Service Concept Our company solemnly promise you: You buy more than just products, but also meticulous and thoughtful technical support. We provide free remote guidance, remote configuration and commissioning services, and send data to the server specified by the customer. Free IOT solution consulting services! 3.1 Camera Parameters and Selection Pixels: 2 million, 3 million, 5 million optional, default 2 million Lens: 2.8mm/4mm/6mm SD card: Yes Power supply: 12V DC Weight: 0.35kg 3.2 Electrical Characteristics Power supply mode: 12V DC or battery power (Power interface: DC5.5*2.1mm female socket, internal positive and negative outside). 3.3 Communication Characteristics Default networking mode: Ethernet/WiFi, 4G Image upload: FTP server 3.4 Structural Characteristics Antenna type: glue stick type external antenna Material: PC plastic (shell) Main body protection level: IP65 Size: 50mm 50mm 30mm 3.5 Working Environment Ambient temperature -30C~70C, humidity 0~95% (non-condensing) 4 The Core Advantages of the Product Simple installation and rapid deployment, helping IoT projects to land quickly Small size Rainproof, suitable for outdoor environments Comes with fill light, suitable for taking photos at night Remote configuration of parameters 5 WiFi Camera Configuration 6.1 Connect to Computer Power on the camera and connect it to the computer with a network cable. Check the IP address on the camera label, the default is 192.168.1.88 (the actual value on the camera label shall prevail). Set the computer IP to the same network segment as the camera, enter the camera IP in the browser, and enter the login interface By default, the username and password are admin (actually subject to the camera label). 7 Timed Photo Upload Settings Capture photos can be stored to SD card or uploaded to FTP server at any time and interval.
1. Excavators are important and widely used equipment in construction industry. Their general purpose is to excavation but other than that they are also used for many purposes like heavy lifting, demolition, river dredging, cutting of trees etc. 2. Backhoe is another widely used equipment which is suitable for multiple purposes. This is well useful for excavating trenches below the machine level and using front bucket loading, unloading and lifting of materials can be done. 3. Dragline excavator is another heavy equipment used in construction which is generally used for larger depth excavations. For the construction of ports, for excavations under water, sediment removal in water bodies etc. can be done by dragline excavator. 4. Bulldozers are another type of soil excavating equipment which are used to remove the topsoil layer up to particular depth. These are widely used for the removal of weak soil or rock strata, lifting of soil etc. 5. Pile Driving Equipment. Another heavy equipment used in construction site is pile driving equipment in case of pile foundation construction. 6. Pile boring equipment is used to make bore holes in the construction site to install precast piles. 7. Dump trucks are used in construction sites, generally, in big construction site, off-road dump trucks are used. 8. Feller buncher is tree cutting heavy equipment used to remove large trees in the construction field. 9. Telehandlers are hoisting equipment used in construction to lift heavy materials up to required height or to provide construction platform for workers at greater heights etc. 10. Compactors or Rollers are used to compact the material or earth surface. Different types of compactors are available for different compacting purposes. 11. Paver or Asphalt paver is pavement laying equipment which is used in road construction. 12. Tower cranes are fixed cranes which are used for hoisting purposes in construction of tall structures. Heavy materials like pre-stressed concrete blocks, steel trusses, frames etc. can be easily lifted to required height using this type of equipment. 13. Wheel Tractor Scrapers are earth moving equipment used to provide flatten soil surface through scrapping. 14. Graders also called as motor graders are another type of equipment used in construction especially for the construction of roads. It is mainly used to level the soil surface. 15. Trenchers or Trenching machines are used to excavate trenches in soil. These trenches are generally used for pipeline laying, cable laying, drainage purposes etc. Both types of trenchers are available in tracked as well as wheeled vehicle forms. 16. Loaders are used in construction site to load the material onto dumpers, trucks etc. The materials may be excavated soil, demolition waste, raw materials, etc. A loader contain large sized bucket at its front with shorter moving arm.
1.The brief introductions of 25 meters crawler rotary pile drilling rig with circular power rod With hydraulic crawler retractable chassis, self-lifting and falling foldable drill mast, Telescopic drill pipe, the rotary pile drilling rig with circular power rod is a kind of construction machinery suitable for drilling in building foundation engineering. It is mainly suitable for the construction of sandy clay silty soil and other soil layers. It is widely used in the construction of cast-in-place piles continuous walls foundation reinforcement and so on. Compared with the ordinary rotary drilling rig, the rotary pile drilling rig with circular power rod has many objective advantages, such as drilling the concrete ground, the hard sand soil layer, the rock layer and so on. It is suitable for large engineering construction, high speed rail and railway construction. The machine works with fast speed, high efficiency, good drilling quality, oil saving and durable. 2.The features of 25 meters crawler rotary pile drilling rig with circular power rod The folding mast structure is adopted. The structure is simple and exquisite, and its durability is good. The whole machine has good stability, cost saving and convenient maintenance. The upper guide structure ensures the perpendicularity of the drill pipe and the ground, so that the construction is more convenient, the construction efficiency is improved, and the safety is increased. The power head adopts the original patented structure, the design is more reasonable, the lubrication is reliable, the power is strong, the cost is economic, and it is not easy to damage, so it is easy to maintain. The main winch is equipped with imported hydraulic motor, which has a sensitive response and can be freely lowered when used. The lifting speed can reach up to 82m/min, which greatly improves the construction efficiency. The main winch is placed at the right front side of the operator, so that the operator can observe the working condition of the main winch at any time and avoid the phenomenon of disorder caused by other factors. The quality of the national inspection free raw materials and matching parts is more guaranteed. The double winching winch is selected with infinite rotation. The main winch is guaranteed to achieve the rated load. The winching speed of the single winch is 100m/s, which is increased by two times compared with that of the previous year.
