CE RD-25 ACE PNEUMATICS rock drill is the ideal tools for all type of drilling operations. This rock drilling machine features high blow rates torque, resulting in rapid drilling even in the hardest rock.Its streamlined design incorporates smooth contours side exhausted and forged alloy steel construction that makes them easy to handle in quarry, mine and general excavating work. Feature: *Alloy Steel Forgings-Provide Excellent Durability *Built-in automatic oiler *Air Inlet swivel for easy connection *Low operating costs. *Excellent Durability
DTH Drilling Rig mounted on a MAN Truck up to 600 Mtr
The advantage of friction welding is that, different steel qualities can be chosen for the mid-body section and the tool joints. High quality alloy steel is used for the tool joints, Zero maintenance, and long lasting life of the rods. When required, an additional surface hardening can be applied to the tool joints for increased wear resistance. The rods have spanner flats on the pin and box ends. Plastic/Metal thread protectors are available for all API connection types. The rods are suitable for both DTH hammer and rotary drilling on (Top Drive Machine) The drill pipes can also the supported with fully induction hardened to increase the life.
The DTH300 drill rig is ideal for water well drilling application in rock formation. Thanks to its simple and compact design, excellent performance, high accessibility and reliability at afford cost in its class. The DTH300 rig’s flexibility means it can be mounted on single truck version, two truck versions and on local truck matching the rig to the terrain it will be used. Key features: Proven technology ensures easy maintenance and more productive. The rig can be customize as per customer requirement All the actuators are operated by proportional control valves
Tungsten Carbide Rotary Burr Blank 1. Used in geological prospecting, machinery and tool manufacturing, and Serves as the drill bit in wind-drill and electric drills for coal digging. 2. Fit for precision lathe are used in nonstop cutting of cast iron, and its alloy. 3. Can be made as per your drawing of sample, several grades suitable for your needs. Welcome your inquiry. Samples and quotations will be given upon receipt of your inquiry.
API P530 Non-magnetic Drill Collar Materials: The non-magnetic products of Dongying Lake is made from high-class low carbon stainless steel, and completely meets the requirement of API Spec 7-1 and SY/T5144 Standard. It has good low magnetic permeability, high mechanical property and perfect enduring intergranular corrosion cracking performance. It is mainly used for the inspection in the process of petroleum drilling, and the structure is the same with the ordinary drill collar. Trepanning and Heat Treatment: Drill collars are trepanned and drifted to API Spec 7-1. Full-length heat-treatment processes ensure that mechanical properties meet or exceed API Spec 7-1 requirements. A hardness range of 285-341, Brinell hardness and Charpy "V" notch minimum impact strength of 40 ft-lb at 70 F are guaranteed one inch below the surface. Traceability: Drill collar material and process traceability are maintained from receipt of the mill's certified raw material to completion of manufacturing. Serial numbers are die stamped on bar bodies. Rigid Inspection Procedures: We inspect all our drill collars to ensure compliance with API SPEC 7-1 standards. These inspections include visual dimensional checks as well as ultrasonic inspections over the entire body of the drill collar. Cold Rolling: Drill collar thread roots, as well as elevator recess upper radius, are cold-rolled. Cold rolling creates a compressive recess upper radius stress condition that increases fatigue life by minimizing crack initiation. Phosphate-coated or Copper Plating: All connections are phosphate-coated or copper plated to improve resistance to corrosion.
Hss circular saw blade are made of m2/m35/m42. The heat treatment is adjusted using proven methods for each material so that the tools have excellent cutting properties.
Out diameter: 50-600mm, bore: 20-50mm thickness: 0.5-6mm Condition: annealed material: m2 /m35/d2 surface: polished or not Application : used for processing circular knives, circular saw blades,
TCI cone bit used in oil drilling, water well, coal field exploration and development of engineering applicationsï¼? apply to soft hard staggered formation, such as soft shale, clay, gypsum, limestone, gypsum, sandstone, conglomerate, dolomite, sandstone, etc .
Tci cone bit used in oil drilling, water well, coal field exploration and development of engineering applicationsï¼? apply to soft hard staggered formation, such as soft shale, clay, gypsum, limestone, gypsum, sandstone, conglomerate, dolomite, sandstone, etc .
TCI cone bit used in oil drilling, water well, coal field exploration and development of engineering applicationsï¼? apply to soft hard staggered formation, such as soft shale, clay, gypsum, limestone, gypsum, sandstone, conglomerate, dolomite, sandstone
TCI cone bit used in oil drilling, water well, coal field exploration and development of engineering applicationsï¼? apply to soft hard staggered formation, such as soft shale, clay, gypsum, limestone, gypsum, sandstone, conglomerate, dolomite, sandstone
1. Scope Model DYFZ-A mechanical stage tool is a special tool used to complete the cementing operation in two times. Mainly used in the following circumstances. 1.1. Excessive injection of cement at one shot. 1.2. The formation cannot bear the gigantic fluid pressure. 1.3. Packoff special strata. 1.4. Avoid the occurrence of annual air channeling after the cementing job. 1.5. The considerable temperature difference between the upper and lower section makes it rather difficult to adjust the slurry performance. 1.6. Two-stage cementing for deviated and horizontal wells 2. Structure Model DYFZ-A mechanical stage tool mainly consists of two-stage coupling (body), shut-off baffle, first-stage plug, Free-fall opening plug and closing plug 1. An anti-rotation device is specially developed to prevent the synchronous rotation of closing sleeve and bits. 2. A particular structure is developed to prevent the possible pre-shutoff of closing sleeve. 3. In the closing sleeve of closed circulation hole, close the locking mechanism to prevent closure put on the back, to achieve permanent closure. 4. All accessories, made from premium quality rubber or aluminum material, have very good anti-rotating mechanism that makes drillout easy. 5. Free-fall opening plug and pumping-down opening plug are available to realize mechanical opening. 6. The ID. of upper/lower sub should be the same as that of casing, but smaller than that of closing sleeve, which protects the clos Specifications(in),7" Opening Pressure(Mpa),7 Closing Pressure(Mpa),5.5 Sealing Capacity(Mpa),,25 Rated Load(t),180 Connection Thread,API 7" Max. OD. (mm),208 Drill-out ID. (mm),157 Overall Length (mm),990 Length of first-stage plug (mm),320 Length of closing plug (mm),280
Insoll Tools PCBN Inserts (Tipped CBN Inserts) are effectively applied in many industries, eg: automotive and bearing industry. 3 grades are supplied: ITS700, ITS750, ITS950. ITS700-for high speed machining grey cast iron. Roughing/semi-finishing light interrupted cutting. ITS750-for roughing and semi-finishing cast iron. ITS950-for continuous roughing and semi-finishing cutting high hard steel (HRC45-65). Because of its thoroughly brazed solid corner, Insoll Tools PCBN inserts series with many advantages: More flexible clamping methods; Higher machining precision; More cutting edges.
Full top PCBN inserts possess excellent hardness and thermal stability and bears 1300 degree of cutting temperature, which is mainly used for machining Hardened Steel with HRC50-60 hardness. For example: carbon tool steel, bearing steel, die steel and high speed steel and so on, gray cast iron, nodular cast iron, chilled cast iron and Ni-baseã?�Co-baseã?�Cr-baseã?�Fe-base high temperature alloy. Insoll Tools supply 3 grades PCBN inserts: ITC10-for high speed machining grey cast iron. Roughing/semi-finishing light interrupted cutting. ITC20-for roughing and semi-finishing cast iron. ITC30-for continuous roughing and semi-finishing cutting high hard steel (HRC 45-65).
Rich metal is a young but professional end mill vendor, focusing on improving and providing customized end mill, especially tungsten steel endmill. Rich metal insists the values of â??integrity, service, innovation and progressâ?�. Standing with these values, we commit ourselves to bringing the best products to our clients. We have won good reputation and strong trust from business partners in america and europe and at domestic market. 2013 we started rich metal brand in international trading. Material: tungsten carbide (yg, yt, yw) Hardness: 45-68hrc Unit price: negotiable Moq: 50pcs
Power input 800 w Chuck capacity 1.5-13 mm Max torque 22 nm No load speed 0-3000 rpm Beats per minute 0-54000 bpm Max. Drilling capacity Wood 32 mm Steel 13 mm Masonry 16 mm Weight 2.4 kg
The drill collar is used between the drill pipe and the bit in the drill stem. It is used to put weight on the bit so that the bit can drill. Materials: Drill collars are manufactured from AISI 4145H modified steel, and are supplied in the "as rolled" surface finish condition. Alternative surface finishes are available. Trepanning and Heat Treatment: Drill collars are trepanned and drifted to API Spec 7-1. Full-length heat-treatment processes ensure that mechanical properties meet or exceed API Spec 7-1 requirements. A hardness range of 285-341, Brinell hardness and Charpy "V" notch minimum impact strength of 40 ft-lb at 70 F are guaranteed one inch below the surface. Traceability: Drill collar material and process traceability are maintained from receipt of the mill's certified raw material to completion of manufacturing. Serial numbers are die stamped on bar bodies. Rigid Inspection Procedures: We inspect all our drill collars to ensure compliance with API SPEC 7-1 standards. These inspections include visual dimensional checks as well as ultrasonic inspections over the entire body of the drill collar. Rolling: Drill collar thread roots, as well as elevator recess upper radius, are cold-rolled. Cold rolling creates a compressive recess upper radius stress condition that increases fatigue life by minimizing crack initiation. Phosphate-coated or Copper Plating: All connections are phosphate-coated or copper plated to improve resistance to corrosion. Slip Groove, Elevator Groove and Size: Huanjie offers optional slip and elevator recesses to improve handling efficiency and safety. Unless otherwise specified, slip and elevator recesses are machined in compliance with API spec 7-1 guidelines. Thread Protectors: Our company offers steel, cast steel and plastic steel thread protectors for its drill stem products.
1.Mud pump liner type: bi-metal liner, ceramic liner 2.Mud pump liner standard: api 7k Mud pump liner description: 1. Our company could supply all spec premium liners and ceramic liners used in various brands of mud pumps. 2. Our premium liners are made of a forged steel outer shell and a high chromium iron inner sleeve. The out shell is centrifugally forged with high quality carbon steel, with tensile strength > 610mpa, yield strength > 450 mpa, elongation >17%, hardness hb -180-200; the inner sleeve is centrifugally forged with high chrome iron alloy, with hardness over hrc62 after heat treatment. Each liner is machined to close tolerances to assure ease of installation and long liner life with the inside diameter of these premium liners honed to a mirror-like finish for smooth even wear during the life of the liner. It could serve more than 800 hours. 3. Our ceramic liners are made of a forged steel outer shell and a ceramic inner sleeve. We can supply zirconia(zro3) sleeves as well as alumina(al2o3) sleeves. The ceramic liners are mainly used for well drilling and geological explorations especially widely used in harsh oil mining environment, offshore well&gas exploration etc. It serves a 5 to 10 times longer life than metal products, and will cut down the mining cost of more than 50%. -
Cement basket is an effective aid in retaining and supporting the cement where weak formations and stage cementing is encountered. It is designed with flexible bow springs, heat-treated under controlled conditions for maximum strength and uniformity, are welded to slip-on collars and overlapping metal fins for flexibility and strength to support long columns of cement during primary cementing operation -