Poly ferric sulphate Appearance: Light yellow amorphous solid. The product quality meets the China National Standard (GB14591-93). Methods of operation and point for attention. As the property of raw water is different, experiment for the optimum dosage and conditions previous to operation is necessary so as to obtain the best effect. 1. Determination of the consistency. Before using, dissolve the product in running water in the proportion of 10-30 so as to make it hydrolyze completely. Laying it to present red brown solution, then dilute it to the consistency required for coagulation. It is usually diluted to the consistency of 2-5 in waterworks, and 5-10 in the industry waste water 2. Determination of the optimum dosage. In view of the different property of raw water, it can be determined by the experiment. For the waterworks, you may refer the dosage of other flocculant operated before. Under the same conditions, its dosage is almost equal to the Polymer Aluminium Chloride, 1/3-1/4 of the solid Aluminium sulphate. For the liquids product, you may calculate its dosage according to its consistency. 3. Pump the medicament compounded into the measure trough. When operated, add it into the raw water to coagulate with the raw water 4. It is usually compounded when operated in the running water. It is normal to have a little precipitate in it. Pay attention to the waterpower condition and the state of alum flower in the course of coagulation; Coacervation stage: The medicament flows into the coagulation pool, where it coagulates rapidly with the raw water and forms tiny alum flowers within very short time, at the same time, the water becomes even more turbid. A sharp rushing water is necessary in this stage. For the beaker test, mix for 10-30S in the speed of 250-300r/min, normally not exceed 2 mins. Flocculation stage: It is a process that tiny alum flowers grow longer and bigger. It is necessary for the water to have a suitable rushing water and sufficient velention period (10-15mins). In the later period of this stage, a large quantity of alum flowers gather and subside slowly. For the beaker test, mix for 6 mins in the speed of 150-200min, then 60r/min for 4 mins, to present a suspended state. Subsidence stage: It is a process that the flocculate subsides in the subsidence tank, where a slow current velocity is necessary. To improve the water quality, the subsidence tanks are usually designed in the oblique tube or oblique board model, (it is best to separate the flocculate by the fªgas-floating) method), so that a large quantity of thick alum flowers are stopped by the tube or board wall and subside at the bottom of the tank. The upper layer is clear liquor. In the meantime, the alum flowers with small size and density subside slowly and continue colliding to grow large. In the later period, the turbidity id almost fixed. For the breaker test, mix for 5 mins in the speed of 20-30 r/min ,then subside for 10mins and check the turbidity . 6. Strengthen the filtering: Choosing the reasonable filtering layer structure and filtration aid, is the important measure to improve the water quality. 7. For the treatment of industry waste water , on the whole it is similar to the waterworks. Cooperated with other coagulant aid, it will achive a optimum effect in the treatment of raw water with high colour, COD and BOD. 8. For the factories and mines employing the chemical coagulation method, the product can also be used by adding a dissolving pool only. 9. The product can be preserved in the place for a long time, where is dry, damproof and heatproof(normally below 80 f¦).And be sure not to damage the package. 10. The product must be dissolved before use . Further, the equipment for dissolution and feeding should be anti-corrosive. The application field and reference dosage .(Cf form2). Name Recommended Consumption Drinking Water 1:400000-1:400000 Industrial Water 1:400000-1:400000 Town Water 1:30000-1:60000 Electroplating Effluent 1:30000-1:50000 Metallurgy Mineral Separation Effluent 1:20000-1:50000 Non-ferrous Mineral Separation Effluent 1:20000-1:40000 Iron and Steel Industry Effluent 1:15000-1:30000 Coal Washery Effluent 1:10000-1:30000 Power Plant Effluent 1:10000-1:30000 Food Industry Effluent 1:8000-1:16000 Machine Work Emulsion Effluent 1:5000-1:12000 Chemical Industry Effluent 1:6000-1:10000 Oil Field Driling Effluent 1:6000-1:8000 Printing & Dyeing Effluent 1:5000-1:7000 Paint-making Effluent 1:5000-1:7000 Scouring Effluent 1:4000-1:6000 Paper-making Effluent 1:3000-1:6000 Leather-making Effluent 1:3000-1:6000 Sludge Dehydration 1:100-1:160 Package: Inner: Nonpoisonous polythene plastic bag. Outer: Weaving bag N.W.:25kg per bag. Characteristics of the product: Compared with other quality inorganic flocculant, the product has the following characteristics. 1. It is a new, high quality and efficient molysite category inorganic characteristics. 2. It has a good coagulation function with thick alum flowers and fast subsiding speed. 3. The product has an excellent purifying effect. It is safe, reliable, nonpoisonous and harmless. It doesnf+t contain any harmful substances such as Aluminium, Chlorine and heavy metal ions, neither does it have water phase transference of iron ions. 4. It can be used in discolouring, dehydrating, deodorizing, degreasing, sterilizing as well as discarding heavy metal iron, radioactive substance and carcinogens in the water, and eliminate COD, BOD, and colour as much as 90·-. 5. It can suit the water that the pH is form 4 to 11, (the optimum pH is 6-9). After treatment, the pH has little change. Further, the product has little corrosiveness to the equipment. 6. It has a very good effect in purifying the raw water with algae, low temperature and low turbidity, and slightly contaminated. 7. It has a better effect in purifying the high turbidity raw water. 8. It can be used at a very low cost, and save the cost as much as 20-50·-. 25KGS PER BAG.
Water treatment 25kgs
Hydrolyzed polymaleic anhydride (hpma) Cas no.: 26099-09-2 Structural formula: Properties: Hpma is a low molecular weight polymeride, with average molecular weight 400-800. No toxicity, soluble in water, high chemical and thermal stability, decomposed temperature above 330íµ. Hpma has obvious threshold effect under high temperature (350íµ) and high phú¿8.3ú¬level, suitable to be used in alkaline water system or built with agents. It has good scale inhibition against carbonate and phosphate scales under temperature 300íµ with effective time as long as 100 hours. Due to its good scale inhibition and high temperature tolerance properties, hpma is widely used in desalination plant of flash vaporization equipment, low pressure boiler, steam locomotive, crude oil evaporation, petroleum pipeline, and industrial circulating cool water systems. In addition, hpma has good corrosion inhibition effect when used together with zinc salt. Hpma can also used as additives for cement. Specification: Items Index Appearance Clear to umber transparent liquid Solid content % 48.0 min Bromine value mg/g 80.0 max Average molecular weight 450 min Phú¿1úÑ solutionú¬ 2.0-3.0 Density ú¿20íµú¬g/cm3 1.18 min Usage: Hpma is usually used together with organic phosphonate at dosage of 1-15ppm for circulating cool water system, oilfield fill water, crude oil dewatering and low-pressure boilers. Hpma has good scale inhibition (98%) and scale stripping properties. When used together with zinc salts, it can effectively inhibit carbon steel corrosion. Package and storage: Normally in 250kg net plastic drum, ibc drum can also be used as required.Storage for one year in room shady and dry place. Safety protection: Acidity, avoid contact with eye and skin, once contacted, flush with water. 250kg net plastic drum
Water treatment Water disinfection units. Variety of multi-purpose high-class water purification units for the cleaning and disinfection of raw water. The equipment does not require chemical additives, just a little salt and electricity. The highly reliable units efficiently and ecologically produce superior quality drinking water in conformity with the german drinking water directives.
Bromochloro-5,5-dimethylimidazolidine-2,4-dione (BCDMH) Chemical name: Bromochloro-5,5-dimethylimidazolidine-2,4-dione CAS NO. : 32718-18-6 Molecular formula: C5H6BrCLN2O2 Molecular weight: 241.5 Properties: white or off-white crystalline powder, slightly dissolved in water,dissolved in chloroform,ethanol and other organic solvent,easy to decompose in strong acid or alkali,stable in dry state. Having slight irritation odour. Uses: mainly used in the disinfection of industrial circulating water, swimming pool, oil field water, spring, hospital sewage, medicinal facilities, aquaculture, food process, hotel, home, warehouse, custom and epidemic-stricken area. Quality index(company standard): Item Index Top-grade Qualified product (BCDMH) Bromochloro-5,5-dimethylimidazolidine-2,4-dione Mass fraction of , Â 98.0MIN 96.0 Mass fraction of bromine, % 31.0-35.0 31.0-35.0 Mass fraction of chlorine, %Â 155-162 155-162 Melting point, Loss on dry(60,1h)%Â 0.50MAX 0.80 Chroma, YID1925Â 7.0MAX Insoluble in chloroform, % 0.50MAX Type of commodities: Tablets:20G/Tablet, 80G/Tablet granule: irregular granule from 8mesh to 30mesh powder Packing: This product is sealed in paper-plastic multiple bag with lining of two PE bags,net weight:25Kg,flake product packaged in 25Kg paper sheet barrel with PE bag lining.This product should be stored in shady dry environment and forbidden to be stored with poisonous or harmful material,preventing from pollution. If you have any demand about my products.
BAX01FD Nitrate and perchlorate selective anion resin PHYSICAL PROPERTIES Polymer Structure Styrene Crosslinked with DVB Ionic Form, as shipped Chloride Screen Size Distribution 16 to 40 +16 mesh (U.S. Std) < 5% -40 mesh (U.S. Std) < 1% Uniformity Coefficient (max.) 1.6 Water Retention 35 ¡§C 55% Swelling Cl- to OH-(max.) 15% Total Capacity 0.6 meq/ml min Shipping Weight(approx.) 0.63-0.73 g/l Temperature Limit 80¡æ Export:25L PE bags or 1000L big bags,or as client's request.
PW511 Super high capacity strong base anion resin for highest possible operating capacity and lowest possible leakage PHYSICAL PROPERTIES Polymer Structure Acrylate Crosslinked with DVB Ionic Form, as shipped Chloride Screen Size Distribution 16 to 50 +16 mesh (U.S. Std) < 5% -50 mesh (U.S. Std) < 1% Uniformity Coefficient (max.) 1.6 Water Retention 54 ¡§C 64% Swelling Cl- to OH-(max.) 18% Total Capacity 1.25 meq/ml min Shipping Weight(approx.) 0.68-0.75 g/l Temperature Limit 60¡æ Export:25L PE bags or 1000L big bags,or as client's request.
Cation polyacrylamide is copolymerized on cation monomer and polyacrylamide. Is one kind of high molecular weight of linear polymer. Its functions include decolor, adsorption, cloud-removing and binding Technical index:(company standard:q/ajc003-2006) Trademark molecular weight(million)degree of hydrolysis %solid % available ph residual monomer content% Jcc-1800(adjustable)5-15(adjustable) 89 7-14 Jcc-2600(adjustable)15-25(adjustable) Jcc-3500(adjustable)25-35(adjustable) Jcc-4400(adjustable)35-45(adjustable) Jcc-5400(adjustable)45-55(adjustable) Jcc-6300(adjustable)55-80(adjustable) Jcc-7200(adjustable)80-100(adjustable) Uses Sludge dehydration Paper making auxiliary Treatment of waste water and organic waste water Water treatment flocculant ( river water) Chemicals in oil field 25kg paper-plastic composite bag, or following your demand. Its powder can adsorb the moisture and become the block matter, thus it should be kept in dry, cool and ventilating place. .
Prophylaxis is the manufacturer of stable chlorine dioxide in liquid form with purity 99%, strength 0.76% = 7600 ppm.And generates no harmful by products. Our product is highly effective for the inhibition of all type of microorganism, including bacteria and viruses as well.It also removes algae and bio film effectively. As per customer requirement.
Aluminium sulphate15.8% Al2O3 %---------------------------------min 15.8 Iron Fe content%------------------------max 0.50 Water insoluble matter %----------------max 0.15 PH value 1% aqueous solution------------ min 3.0 Heavy metals as Pb %------------------ max 0.002 As %----------------------------------max 0.0005 Aluminium sulphate17% Al2O3 %-----------------------------------min 17 Iron Fe content%-----------------------max 0.005 Water insoluble matter %----------------max 0.15 PH value 1% aqueous solution------------ min 3.0 Heavy metals as Pb %------------------ max 0.002 AS %----------------------------------max 0.0005 Granularity----------------------------15mm. Packing:25kg or 50kg in bags, 25mt in 20'FCL.
Specificationú¦al2o3ú¦15.80%minú+ fe:0.70%maxú+ph:3.0minú+ Water insolublesú¦0.15%maxíúas:0.0005%max; pb:0.002%maxíú Grain size:15mm maxú¿flakysú¬ Pp/pe 50kg/bag
Water treatment plants
Active content : 45 % min Ph 2.5 to 3.5 Viscosity : 80 to 400 cph 250 kgs
Chloramine B Water treatment Molecular formula:c7h7clno2sna2h2o Cas no.:127-52-6 Appearance:white crystal powder Content:99.5% min Active chlorine:27% min Clarify:lucency Ph:9~11 Iron: 10ppm max Heavy metal:10ppm max Packing:25kg/50kg paper drum Packing:25kg/50kg paper drum 38 x 46
Salt Tablets For Water Treatment
We have full line defoamer for various water treatment systems, include high-content silicone defoamer/ antifoam agent, polyether defoamer, and so on. They can be used in wastewater treatment, MVR systems, Aeration-tank, seawater desalination, Landfill leachate, and other situation. Customize design and free samples are available here. Welcome your further inquiry.
low molecular weight/middle molecular weight and high molecular weight are avaliable. -
Gel type perchlorate selective strong base anion resin.Ion exchange resins and adsorbent medias are often ideally suited for removal of specific contaminants and/or for polishing the effluent from other wastewater treatment processes. Suzhou X Chemical provides a large number of products for wastewater treatment including chelating resins, resins suitable for organic scavenging and resins for selected removal of specific contaminants, such as boron,XResins ion exchange resins are available in many container sizes, mesh sizes, and can be specially prepared to be pH buffered or in a specific ionic form, ready to use. Many of these products are also available with the WQA Gold Seal certification to the ANSI/NSF 61 standard for potable water
Our products have many specifications for selection and can also be customized according to your needs. hypochlorite production package Normally in plastic drum per bag of 45-50kg net each .Can be adaptable in terms of various requirements General Packing & Load Quantity 1. In 40kg net drum 20.00 Ton / 500 DRUM / 20'GP 2. In 45kg net drum 23.625 Ton / 525 DRUM / 20'GP 3. In 50kg net drum 26.25 Ton / 525 DRUM / 20GP 4. In 50kg net drum 21.00 Ton / 420 DRUM / 20'GP
Salt is widely used in water treatment industry, such as water softening system resin regeneration, on-site brine electro chlorination, swimming pool chlorinator and etc. Making from ultra pure food grade vacuum salt, our "DE Salt" water treatment products are offered in different types as: DES-E DES-G DES-S