Standards ASTM / ASME B564 / SB564 Dimensions ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092 Pressure Rating Class 150 LBS, 300 LBS, C22 LBS, 900 LBS, 1500 LBS, 2500 LBS Pressure Calculation 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 Flange Connect Type/ Face Type Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove Flange Size Chart 1/2â?³ (15 NB) to 48â?³ (1200NB) DN10~DN5000 DIN Flanges DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673 Table D, E, F, H Test Certificates EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc Flange Form Slip On Flanges, Socket Weld Flanges, Forged Flanges, Blind Flanges, Welding Neck Flange, Ring Type Joint Flange, Spectacle Blind Flange, Reducing Flange, Threaded / Screwed Flange, Tongue and Groove Flange, Long Weld Neck Flange, Plate Flange, ASME B16.5 Flange
Standards ASTM / ASME B564 / SB564 Dimensions ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092 Pressure Rating Class 150 LBS, 300 LBS, C22 LBS, 900 LBS, 1500 LBS, 2500 LBS Pressure Calculation 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 Flange Connect Type/ Face Type Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove Flange Size Chart 1/2 (15 NB) to 48 (1200NB) DN10~DN5000 DIN Flanges DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673 Table D, E, F, H Test Certificates EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc Flange Form Slip On Flanges, Socket Weld Flanges, Forged Flanges, Blind Flanges, Welding Neck Flange, Ring Type Joint Flange, Spectacle Blind Flange, Reducing Flange, Threaded / Screwed Flange, Tongue and Groove Flange, Long Weld Neck Flange, Plate Flange, ASME B16.5 Flange
Standards ASTM / ASME A182 / SA182 Dimensions ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092 Pressure Rating Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS Pressure Calculation 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 Flange Connect Type/ Face Type Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove Flange Size Chart 1/2â?³ (15 NB) to 48â?³ (1200NB) DN10~DN5000 DIN Flanges DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673 Table D, E, F, H Test Certificates EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc Flange Form Slip On Flanges, Socket Weld Flanges, Forged Flanges, Blind Flanges, Welding Neck Flange, Ring Type Joint Flange, Spectacle Blind Flange, Reducing Flange, Threaded / Screwed Flange, Tongue and Groove Flange, Long Weld Neck Flange, Plate Flange, ASME B16.5 Flange
Standards ASTM / ASME A182 / SA182 Dimensions ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092 Pressure Rating Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS Pressure Calculation 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 Flange Connect Type/ Face Type Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove Flange Size Chart 1/2â?³ (15 NB) to 48â?³ (1200NB) DN10~DN5000 DIN Flanges DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673 Table D, E, F, H Test Certificates EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc Flange Form Slip On Flanges, Socket Weld Flanges, Forged Flanges, Blind Flanges, Welding Neck Flange, Ring Type Joint Flange, Spectacle Blind Flange, Reducing Flange, Threaded / Screwed Flange, Tongue and Groove Flange, Long Weld Neck Flange, Plate Flange, ASME B16.5 Flange
LDPE (low density polyethylene ) is a thermoplastic made from the monomer ethylene. * Soft, flexible, lightweight plastic material. * Low temperature flexibility * Toughness and corrosion resistance * Easy to process and steal * Waterproof Applications: LDPE plastic bags, Light packaging materials: Six-pack rings, Waterproof â?? carton lining, plastic wraps, snap-on lids, wash bottles, corrosion protection layer for work surfaces, computer hardware covers and packaging.
LDPE (low density polyethylene ) is a thermoplastic made from the monomer ethylene. - Soft, flexible, lightweight plastic material. - Low temperature flexibility - Toughness and corrosion resistance - Easy to process and steal - Waterproof Applications: LDPE plastic bags, Light packaging materials: Six-pack rings, Waterproof â?? carton lining, plastic wraps, snap-on lids, wash bottles, corrosion protection layer for work surfaces, computer hardware covers and packaging.
Description: * Heavy duty marathon shackles from Herm Sprenger. Stainless steel with swivel bail. Clevis pin that reduces the need for other link. Releases with one simple pull. Specification: Large Quick Release Hook with Screw Pin Model # WWQRSS3851 Material : Stainless Steel Size : 110 mm/ 120 mm/ 90 mm
Solvent C-9 CAS Number 64742-95-6 Formula C9H12 Aromatic hydrocarbons are a series of organic molecules that form flat ring-shaped bonds. Aromatic hydrocarbon C9 resins are conventionally named because it is defined by the number of carbon monomers in the chemical. C9 have a distinctive aromatic odour and a typical Gardner colour of 6- 10 (dark yellow to dark brown). It is insoluble in water, low alcohols and ketones, however are soluble in aliphatic hydrocarbons and chlorinated hydrocarbon solvents. SPECIFICATION Aromatic Content 99.56 %wt Benzene < 10 ppm wt Non-Aromatics 0.44 %wt Acidity No Free Acid Copper Strip Corrosion Pass 1A APHA Color 3 Initial Boiling Point 164.1C Dry Point 177.2C Specific Gravity @ 15.6/15.6C 0.8763C Density at 15C (in Vacuum) 0.8759g/mL Density at 15C (in Air) 0.8748g/mL Density at 30C (in Air) 0.8628g/mL Density at 30C (in Vacuum) 0.8639g/mL Appearance Colorless, Clear, Free of Foreign Matter Total Sulfur 0.1 ppm wt MAJOR USE: In adhesives, printing inks, sealants, polychoroprene rubber, concrete curing compounds, anti-drying agents and paints. It has a good compatibility with SBR, SIS, SEBS and SEPS and can be used as a pressure sensitive adhesive, hot-melt adhesive and synthetic rubber. These products are available in bulk, drums & bags delivered from Kandla, Mundra, Hazira, Mumbai and Vizag ports & Bhiwandi and Ahmedabad stock points.
Riding boots are specialized footwear designed for horse riding, providing comfort, safety, and functionality. The specifications of riding boots can vary based on the type of riding and personal preferences, but here are some common features and specifications: 1. **Material:** - **Leather:** High-quality leather is often preferred for its durability, flexibility, and breathability. - **Synthetic Materials:** Some riding boots are made from synthetic materials, which may offer advantages such as easy care and lower cost. 2. **Style:** - **Tall Boots:** Extend up the leg, typically reaching just below the knee or over it. - **Paddock Boots (Jodhpur Boots):** Ankle-height boots commonly worn for everyday riding and stable work. 3. **Closure:** - **Zippers:** Full-length or partial zippers are common for ease of putting on and taking off. - **Laces:** Traditional lace-up style for a snug fit. 4. **Sole:** - **Riding Sole:** Usually flat or slightly heeled to prevent the foot from slipping through the stirrup. - **Tread:** Some boots have a specific tread pattern for improved grip on stirrups and stable surfaces. 5. **Toe Shape:** - **Round Toe:** Traditional and often seen in English riding boots. - **Square Toe:** More common in Western-style riding boots. 6. **Lining:** - **Leather or Synthetic:** The inner lining can affect comfort and breathability. 7. **Water Resistance:** - **Waterproofing:** Some riding boots have waterproofing treatments to keep the feet dry in various weather conditions. 8. **Safety Features:** - **Reinforced Toe and Heel:** Added protection in high-impact areas. - **Ankle Support:** Important for stability during riding. 9. **Closures:** - **Snap or Buckle Closures:** Common in English riding boots for a secure fit. 10. **Style Details:** - **Decorative Stitching:** Adds aesthetic appeal. - **Embossed Logos or Designs:** Brand or style-specific embellishments. 11. **Purpose:** - **Dressage Boots:** Elegant and designed for precision in movements. - **Jumping Boots:** Provide more flexibility for jumping. - **Western Riding Boots:** Often characterized by a distinct heel and style. When choosing riding boots, it's essential to consider the specific type of riding you'll be doing, your personal preferences, and the fit for both comfort and safety. Always consult with experts or experienced riders for advice tailored to your needs.
Flat & Snap Hooks MODEL:MH01 Remark: 4" Flat Hook Surface Treatment: Powder Coated Breaking Strength: 8000kgs/17600lbs.
Anchor swivel shackle is a joining link that is connected with the anchor and chain cable, which has both the functions of swivel and shackle. Swivel shackle has two types: type a and type b. Both types of swivel shackles are applicable to grade 2 and grade 3 anchor chains. It can be from forged steel or cast steel. Type a swivel shackle can join directly the anchor shank. It is not suitable for the connection with anchor shackle. Type b swivel shackle can be directly connected with the anchor shackle and also accessible to be connected with anchor shank.
Our products have high quality with competitive price.We provide free samples.All standard vials usually can be despatched within 24 hours after receipt of payment. 12 packs in one ccarton(365*195*122mm) ,48 packs in one carton(420*370*270mm) ;Weight is 15.6KG per carton . All the caps with septa fit for 2ml vials are packed by Food Class PP bag in the 10000 class cleaning Room ;100pcs per pack ,100packs in one carton;Weight is 5kg per carton .
Dimensions ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092 Pressure Rating Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS Pressure Calculation 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 Flange Connect Type/ Face Type Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove Flange Size Chart 1/2â?³ (15 NB) to 48â?³ (1200NB) DN10~DN5000 DIN Flanges DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673 Table D, E, F, H Test Certificates EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc Flange Form Slip On Flanges, Socket Weld Flanges, Forged Flanges, Blind Flanges, Welding Neck Flange, Ring Type Joint Flange, Spectacle Blind Flange, Reducing Flange, Threaded / Screwed Flange, Tongue and Groove Flange, Long Weld Neck Flange, Plate Flange, ASME B16.5 Flange
"This clear PTFE flexi Labret lip ring with a unique gay pride double male logo measures 16g/1.2mm with a 3mm flat sterling silver top Wholesale Body Jewelry Provider from US. International Silver Inc opened in New York in 1997 and since then we provide our customers with quality body jewelry at the best price.
"This clear PTFE flexi Labret lip ring with a unique gay pride double female logo measures 16g/1.2mm with a 3mm flat sterling silver top Wholesale Body Jewelry Provider from US. International Silver Inc opened in New York in 1997 and since then we provide our customers with quality body jewelry at the best price.
(5) minimum safety factor 4:1 (6) proof tested to 400% rated load (7) fatigue tested to 150% rated load over 20, 000 cycles of tensile strength test passed. (8) proof tested to 2.5 times working load limit (9) heat treatment: quenched & tempered 161;¡§o© Packaging & delivery Packaging detail: carton or + steel pallet Delivery detail: about 15-25 days upon receipt of Your order Contact us for further information My email address is sales at nices dot net
Swivel-Ring Flanges can be designed for any size and pressure rating to meet applicable dimensions and gasket types of any recognized flange specification, such as ASME B16.5, API 6A or MSS SP-44. Non standard Swivel-Ring Flanges can also be custom-designed for certain applications; for example, applications involving large pipelines may incorporate features such as hub face profiles to aid axial alignment and Teflon rings between the SRF ring and hub to reduce rotational friction Ordering Information£º Please provide the following information on any purchase order or request for quotation: Nominal pipe size Pipe wall thickness or bore Pipe grade Design rating Specification of mating flange. Packing by plywood.
Such as us type swivel ring g-401, us type swivel ring g-402, us type swivel ring g-403, eu type swivel ring and so on.
9mm Ring snap button silver clr order qty 1000grs
Specifications Chain Rigging 1) We are factory 2) Galvanized /self colour 3) Steel or stainless steel, Stainless Steel Swivel Shackle AISI316&AISI304 Stainless steel Jaw &Eye Precision Cast Standard
