Rough Blue Kyanite Pendant Suppliers and Manufacturers

Beauty of Joseon, Apricot Blossom Peeling Gel This is a gommage type exfoliant containing 19% Prunus Mume Flower Water and 8% plant-derived Cellulose. It helps to improve skin troubles caused by rough skin texture and excess sebum. - Gommage texture The gommage texture minimizes skin irritation. As the plant-derived cellulose is worked onto the skin, it gently exfoliates dead skin cells and skin wastes. It can be used on the both face and body. - Moisturization Containing 19% prunus flower water and 8% plant-derived cellulose, it helps make the skin texture soft and moist.

ASAHI GUIDE WIRE SION AHW14R001S ASAHI GUIDE WIRE SION BLUE AHW14R004S ASAHI GUIDE WIRE SION BLACK APW14R010S

PEROS ASPEROX BLUE POWER SPRAY 1000 ML

Garnier Micellar Pure & Clean Blue 400 Ml

2Lians Recycling PTE. LTD. can supply below HDPE scrap: HDPE Drum Regrind Scrap For Recycling MATERIAL: HDPE drum regrind CATEGORY: HDPE TYPE: Regrind GRADE: Blow SPECIFICATION: All are blow grade with 70% HDPE drum regrind and 30% of HDPE small drums, container,... Origin: New Zealand LOADING WEIGHT: 21 tons FAS (USD/Ton): 550-750

Has superior quality not inferior to teak wood This wood turns out to have export quality and is able to compete with teak wood. This fact shows that the wood or coconut glugu is of very high quality and is suitable for making furniture. Here are some of its characteristics: Has a fairly long size ranging from 5 to 30 meters. Brownish red in color. The darker the color of the wood, the darker it becomes. On the other hand, if it is young, the color of the wood is light brown or yellowish brown. The level of strength of young coconut glugu is not as strong as that of old ones. It has a large fiber shape that makes the surface texture rough. Quality coconut wood has a dense texture so it doesn't make a loud sound when tapped.

Like wax candles, Rouseki (Pyrophyllite) is white and semi-transparent, and has a waxy texture when touched. It is very brittle, and tends to crack largely along the stone joints. Up close, this stone looks grayish white, but may look blue from a distance. The ore looks so similar to pottery stone ore that they cannot be distinguished. But there is a difference in their texture, color, and how they crack, and with experience, their differences become more visible. They not only look and feel different, but their applications and properties also differ significantly. It's used as Firebricks, crucibles, glazes, fire-resistant powders, etc.

APPLICATION OF SK-HB K-SILICATE MORTAR : * K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors. It is also used for jointing chemical resisting stoneware pipes. K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles. The concrete surface needed protection should be dryed, clean and rough. The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner. When Bedding and Jointing Materials are the same. On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints. The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water. Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic. When Bedding and Jointing Materials are Different. Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions. PREPARATIONS OF MORTAR : * Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan. * Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar. * In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared. * The cement mortar will be used before it starts setting.

Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor

DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.

Sumatra Coffee In North Sumatra, a road snakes around the lush forest, beautiful waterfalls and striking volcanoes to arrive in a land that grows a strong coffee with enchanting flavor. Lintong Nihuta lies southwest of Lake Toba, one of the worldâ??s most buried inland bodies of water. The land in this region rises to a high plateau, providing the altitude necessary for Arabica cultivation. Lintong accurately describes only coffees grown in a relatively small region just southwest of Lake Toba in the district of Lintong Nihuta. Small plots of coffee are scattered over a high, undulating plateau of fern-covered clay. The coffee is grown without shade, but also without chemicals of any kind, and almost entirely by smallholders. Each of the small farmers produces coffee on less than a hectare of land. They may bring some of their coffee to sell at the weekly market in Lintong, but companies also go directly to the farmers to purchase most of it at a better price. Because of its dark bluish color, the coffee is also well known as â??Blue Batakâ?? (Batak is the ethnic group that inhabits the region). Notes of chocolate are evident in the finish. High-quality Lintong differentiates themselves from other Sumatran coffees in their clean mouthfeel and slightly brighter acidity. In contrast with Mandailing, Lintong has a medium body but retain notes of dark chocolate and fresh earth. The coffee's taste recalls sage, tobacco, cedar and herbs, but these earthy flavors are balanced by chocolate tones. It is a fairly robust cup with a low to medium level of acidity and a syrupy mouthfeel.

Syoss Keratin Blue Lotus Hair Care Cream 500ml

A rough estimate is 50 tons for dumplings, 20 tons for film compression, and 30 tons for rolls. Rolls are 60% natural and 40% colored. All rolls are brand new

A rough estimate is 50 tons for dumplings, 20 tons for film compression, and 30 tons for rolls. Rolls are 60% natural and 40% colored. All rolls are brand new

A rough estimate is 40 tons lumps natural, 10 tons film bales natural, and 30 tons rolls natural, 30 tons rolls color. All rolls are brand new. Estimated 8 tons Lumps + 12 tons Rolls + 2 tons Film = 22 tons/40'HC.

Almost white, some blue roll LDPE Mix Nylon: 5 to 10% nylon mixed only few 25% mixed.

Origin: Japan Category: LDPE Type: Lump, film, rolls Grade: Natural and mix color Loading weight: 20 Tons Quantity: 100 Tons Spec:A rough estimate is 60 tons lumps natural, 20 tons film bales natural, and 20 tons rolls natural, 20 tons rolls color. All rolls are brand new. Price FOB: 450-650 USD/Ton

Pet Bottle Lumps: Post industrial lumps Mixed color , Mainly clear and blue Bottle Grade , IV: 0.80 Loading weight: 22 Tons

PET LUMPS NATURAL WITH SOME BLUE COLOR FROM BOTTLES PREFORMS (with % burned parts) Packaging: BIG BAGS Minimum loading weight: 22-24MT Quantity available: 130MT Subject to unload