1. Application Material: Petroleum Coke 2. Feed size: =200mm Moisture =5 3. out size: 325mesh(D97), particle size can be adjusted. 4. Output: shot coke 3t/h-4t/h ; sponge coke 4t/h-5t/h 5. Supply completed grinding machine (including crusher, conveyor equipment and grinding machine) FLM-1000 grinding machine is suitable for petroleum coke, including crusher, conveyor equipment (including auger and powder pneumatic conveying),grinding machine. Simple process flow diagram(detail information is on attachment) FLM-1000 petroleum coke grinding mill is the use of violent impact hammer / Blade / rods and materials and other high-speed rotation of the rotary body, while at the impact of the gap between the hammer and the liner impact / abrasion scissors cut, to achieve ultra-fine grinding powder. The model choose characteristics of petroleum coke , using the CFD fluid dynamics simulation software to calculate the most suitable flow field, pressure distribution to guide the design, improve the grinding efficiency, reduce energy consumption. FLM-1000 grinding machine for petroleum coke feature: 1. Grinding machine is based on petroleum coke characteristics, using numerical simulation software to design the most suitable crushing and classifying flow field, to optimize main engineer system and turbo air classifier design, effective solution to the problem of adhesion, increased capacity and no large particle size appear; 2. The mill is good at small installed power, optimizing system structure, reducing energy consumption greatly, installed power lower than other similar models; 3. The mill is powerful blowing when running,also has a certain drying function on material; the device can dry material with 80-100 ? flue gas. Raw water is 9%, the finished powder moisture Raw water is 7%, the finished powder moisture Raw water is 5%, the finished powder moisture 4. The mill choose unique design and a constant flow field of gas-solid concentration control technology, a uniform particle size, narrow distribution, no large particle size, and to ensure the stable operation of the system a long time 5. Grinding hammer and ring use cemented carbide materials which made through a special process, the alloy wearing spare parts use abrasion treatment, which increase the service life of wearing parts, service life is 3-4 times than other similar models ,and greatly reduces the contamination of iron impurities; (this method has been very good in application a number of units) The mill choose unique protection disc design, effectively reduce the wear of the disc, greatly extending the life order.
Petroleum coke, often abbreviated as petcoke, is a byproduct of the oil refining process. It is produced when heavy crude oil undergoes a distillation process that separates it into various components like gasoline, diesel, and jet fuel. During this process, residual oil is left behind, which is then further refined to produce petroleum coke. Petroleum coke is primarily used as a fuel source and in the production of anodes for aluminum smelting. It is known for its high carbon content, making it an efficient and cost-effective fuel for power generation and industrial processes. There are two main types of petroleum coke: calcined and green coke. Calcined petroleum coke has been heat-treated to drive off volatile substances and impurities, while green coke is typically used as a fuel source in industrial applications without undergoing calcination. Pet coke represents a valuable secondary product that can be exported to markets where it is in demand, such as in the aluminum and steel industries. Its usage as a fuel also makes it relevant for energy markets, particularly in regions where there is a need for affordable and reliable sources of industrial fuel. Origin: Kazakhstan / Russia.
Pet coke Origin : USA, Russia , Venezuela Color : Black Sulphar
Petcoke, also known as petroleum coke, is a carbon-rich solid material that is produced during the refining of crude oil. The specifications of petcoke can vary depending on the type and source of crude oil, as well as the processing method used to produce it. However, here are some of the general specifications for petcoke: - Carbon content: Typically ranges from 85% to 95% - Sulfur content: Can range from less than 1% to over 7% - Moisture content: Typically less than 5% - Ash content: Can range from less than 1% to over 10% - Volatile matter: Can range from less than 5% to over 20% - Size: Can range from a fine powder to large chunks Petcoke is primarily used as a fuel source in industrial processes, such as cement manufacturing, power generation, and steel production. It is a cheaper alternative to coal, and its high carbon content makes it an effective fuel for energy-intensive processes. However, its high sulfur content can contribute to air pollution and acid rain, so it is often subject to emissions regulations. Petcoke is also used in the production of anodes for the aluminum smelting industry, as well as in the production of graphite electrodes for the steel industry. In addition, it is sometimes used as a source of carbon in the production of certain chemicals and materials.
GREEN PET COKE Payment mode - 100% LC For price and specifications please email LOI with BCL. We can supply Petcoke from Russia. We deal in fuel grade , anode grade essar petcoke in large quantity. Russian Green Pet Coke Sulphur from 0.2 -0.6% Max and Fuel Grade Petrol Coke with Sulphur from 2.5 to 6% Max We can produce per customer required Spec's General Spec's attached for Each.
Moisture Content (as received) - 6.0 Moisture Content (after initial drying) - 0.7 Ash (after initial drying) - 0.3 Volatile Matter (after initial drying) - 10.9 Fixed Carbon (Calculated) - 88.1 Density-Vibrated Bulk(after initial dry) - 0.776 Total Sulfur (after initial drying) - 5.6 Hard Grove Grind ability Index (HGI) - 56 Gross Calorific Value (GCV) - 8390
Petroleum products, en590 10ppm diesel, en590 diesel, jet a1, aviation fuel, jet fuel, d2 diesel, d6 diesel, petroleum coke, crude oil.Trade consultancy & representation
As Per Standard Specifications of Pet Coke
For metallurgical coke, we can supply based on the following range of specifications: Fixed carbon: 80%~86% Sulphur: 0.7%~1.0% Ash:13.5%~18% Volatile matter: 1.5% max. Moisture: 8%~15% Size is customized
We supply foundry coke products with the range of specifications as follows: Fixed carbon: 85%~90% Sulphur: 0.5%^0.8% Volatile matter: 1.5% max. Size is customized ASH >8%/15%
Specifications First Grade Second Grade Ash - 10% max Volatile matter - 1.5%max Fixed carbon - 88%min
Fixed carbon : 85%-88% S : 0.6% max Moisture : 5% Ash : 0.6% max V.M : 1.5% Size : 50-100;30-80;25-50;40-70(mm)
PETCOKE ORIGIN: KAZAKHSTAN QUANTITY: 50,000 Metric tonsâ?? trial shipment with up to 500.000 Metric tons� CIF monthly twelve (12) Months. � PRICE CIF $240 GROSS! $220 NET. PRICE FOB $210 GROSS / $200 NET COMMISSION: Seller side $5.00 / Buyer side $5.00
Metallurgical coke is a carbon material resulting from the manufactured purification of multifarious blends of Australian coal.LAMC is Green fuel and 100% Eco Freindly Fuel. Coke is made by destructive distillation of a blend of selected Bituminous coals (called Coking coal or Metallurgical coal) in special high temperature ovens in the absence of oxygen until a greater part of the volatile matter is driven off. The resulting product, COKE, consists principally of Carbon with sizes ranging from basketballs (foundry coke) to fine powder (coke breeze). Coke is primarily used to smelt iron ore and other bearing materials in blast furnaces, acting both as a source of heat and as a chemical reducing agent to produce pig iron or hot metal. We currently operates non polluting non recovery type coke ovens . The raw material requirement is met by importing prime coking coal of Australian origin. The distinct features of our coke are as under: Meticulous coking cycle and relatively higher oven temperatures results in superior coke quality. Complete combustion of coking coals resulting in almost negligible levels of pollution. Advance In-house lab for complete analysis and to rectify minute changes in chemical specifications. We are planning to develop new trends as far as improved coke quality is concerned. Completely RCC coal & coke yard which ensures that the coke quality is maintained. Exclusive mechanized machines for exact sizing and screening of coke. Excellent infrastructure facilities like steel duct & stack and big size ovens which increases the efficiency as well as the quality of coke. We have expertise in producing different coke qualities for the requirements of blast furnaces, foundries, Ferro alloys. We are also diversifying into different activities and moving towards an eco friendly energy by setting up a power plant with the stack emissions of our coke oven. Low Ash Metallurgical Coke (Met Coke) is required for metallurgical and chemical industries and is used as the primary fuel where high temperature and uniform heating is required. The industrial consumers of LAMC include integrated steel plants, industry/foundries producing Ferro Alloys, Pig Iron, Engineering Goods, Chemicals, Soda Ash,Cement Industries,Zinc units and also used in Tea and hotel restaurants & etc.
Pet Coke produced by refineries from the Russian Federation, Kazakhstan, and the Middle East. Available for sale FOB or CIF to any safe world port from proven, reliable sellers. Prices are negotiable for serious big-volume buyers. Buyer mandates welcome
FIXED CARBON 98.5%MIN Sulphur 0.1%MAX Ash 0.7%Max Volatile matter 0.8%MAX moisture 0.5%max Size 1.5 mm
Total Moisture as receive basis, DSTU ISO 579 2002 4,2 Ash dry basis GOST 11022 95, ISO 1171 97 12,1 Total Sulfur dry basis GOST 2059 95, ISO 351 84 0,58 Volatile Matter dry ash free basi GOST 6382 91,ISO 562 81 0,2 Net Calorific Value as receive basis, kcalkg DSTU ISO 1928 2006 6670 Gross Calorific Value dry ash free basis, kcal kg 7983 Phosphorus, P', DSTU 253794 GOST 1932 93 ISO 622 81 0,042 Mechanical strength MA DSTU 2206 93 GOST 5953 93 ISO 556 1980 65,5 Mechanical strength M10, 7,7 Reactivity of coke, CRI, DSTU 4703 2006 27,4 Coke strength after reaction, CSR, 59,8
Low sulphur carbon additive 1.Our style no.: t9805 2.Type:graphitized petroleum coke 3.Fixed carbon content : 161;y98.5% Sulphur content : 0.05% Ash content : 0.50% Volatile content : 0.50% 4.Particle size : 1-5mm 5.Feature:first-class quality, low price, timely delivery and our best service.
High C Carbon Additive Our style No.:T9850 Carbon content: Y 98.5% Sulphur content: ¨0.50% Ash content: ¨0.50% Volatile: ¨0.80%. Particle size: 1 to 5mm, as your requirments.
Consultancy in the oil and gas field: en590, jeta1, d2, petroleum coke and all other petroleum derivatives. only serious inquiries will be entertained..
