This is chemical setting Furan based chemical resistant mortar which is combination of Liquid and Powder, when mixed in proper proportion from workable mortar which after setting and curing give of liquid and give black highly cross linked composites. Furan When set and cured is resistant to highly corrosive acids, alkalis and to powerful organic solvents such as ketones, Aromatic and Chlorinated solvents. It has extreme resistant to Acidic & alkalis, Salts, Greases and Detergents. It resists to Organic & Inorganic acids at their boiling temperature. It is suitable against mild chlorine Gas (dry) phosphorous trichloride, pyridine at room temperature. Furan is especially useful where resistance to mixed media such as aqueous acids /alkalis and organic solvents is needed in chemical plant process and waste streams. Carbon filled Furan is used against corrosive effect of hydrofluoric acid & its salts. PREPARATION OF FURANE MORTAR : Mortar consist of Furan solution and Furan powder. The average mixing ratio necessary to obtain mortar with good working consistency is 1 part by weight Solution & 3 part by weight powder. The ratio will vary slightly depending on temperature and working conditions.Stir the liquid thoroughly before using. Place liquid in a suitable shallow mixing pan. Add powder by weight in the solution mix thoroughly and rapidly until all lumps are dispersed and the mortar is completely homogenous. Spread out the mortar in a thin layer, not more than ¾ thick, to dissipate the heat of reaction and lengthen the working life. Batch size can be varied depending upon the temperature and the speed with which the masons are working. Very large batches will become stiff quite rapidly. Make sure that all the Furan Motrar is used from the pan before another batch is mixed.When working at temperature above 40 C, very small batches not more than 2 Kgs, should be prepared. When working at temperature below 15C the liquid should be kept warm.
PRODUCT DATA SHEET ACID RESISTANT BRICK Material : RED SHALE Type Acid Resistant Brick Size (mm) 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions Heavy thermal shock Typical Physical Properties of GANESHAS Acid and Chemical Resistant Brick Characteristic RED SHALE ACID RESISTANT BRICK Test Standard Bulk Density, gm/cc - 2.3 to 2.35 ASTM C-20 -Water Absorption, % - 0.1 to 1.5 IS 4860-1968 Apparent Porosity, % -0.5 to 1.75 S 4860 Acid Solubility (H2SO4), Loss in Mass,% -0.1 to 1.8 ASTM C-279 Modulus of Rupture, PSI -2133 to 3555 ASTM C-67 Compressive Strength, Kg/cm2 - 700-900 IS 4860-1968 Abrasion Resistant , Volume in mm3 -69 to 85 EN 102 Surface Hardness, MOHS Scale - 7
USB A 2.0 to Type C or Type C to Type C Switchable for different application Length 1m high speed data transmission high speed charging
Wire Gauge: 0.5mm-4mm Surface Treatment: Black Type: Loop Tie Wire Function: Binding Wire
Wire Gauge: 0.5mm-4mm Surface Treatment: Black Type: Loop Tie Wire Function: Binding Wire
Wire Gauge: 0.69-5.5mm Surface Treatment: Galvanized Model Number: Bochuan-galvanized wire Function: Binding Wire Place of Origin: India, China
Wire Gauge: BWG6-BWG35(0.2mm-5.0mm) Surface Treatment: Galvanized Model Number: Q195/Q235 Place of Origin: Hebei,China (Mainland)
SPECIAL FEATURES As an excipient for dry extracts. Crispness enhancer for food processing., food batters., coatings., flavorings., colorants., Cold water-soluble products., glazes., Thickening agent., Binding agent., Stabilizer., Surface finishing agent., Emulsifier
SPECIAL FEATURES As an excipient for dry extracts., Crispness enhancer for food processing., food batters., and coatings., flavorings., and colorants., Cold water-soluble products., glazes., Thickening agent., Binding agent., Stabilizer., Surface finishing agent., Emulsifier
SPECIAL FEATURES As an excipient for dry extracts., Crispness enhancer for food processing., food batters., and coatings., flavorings., and colorants., Cold water-soluble products., glazes., Thickening agent., Binding agent., Stabilizer., Surface finishing agent., Emulsifier
Product name: N,N-Dimethylglycine hydrochloride Other Name: dimethylglycine hydrochloride; N,N-dimethylglycine HCL Molecular Formula: C4H10ClNO2 Molecular Weight: 139.58 Appearance: White Crystalline Powder Solubility:Clear and transparent in water. Purity: >99% CAS NO.: 2491-06-7 EINECS No.: 219-648-2 Supplier: ZHENYIBIO N,N-Dimethylglycine Hydrochloride is a derivative of the amino acid glycine that can be found in beans and liver. N,N-Dimethylglycine HCl is a form of DMG that has been bonded with hydrochloride to aid with absorption. Applied in Healthcare suppliments: 1.N,N-Dimethylglycine HCl can be as an antioxidant and help enhence immunity. 2.DMG HCL supplement may also support the cardiovascular system and aid with athletic endurance.
Product Name: N,N-Dimethylglycine Other Name: DMG; nn dimethylglycine; dmg dimethylglycine; vitamin b15 Molecular Formula: C4H9NO2 Molecular Weight: 103.12 Appearance: White crystalline powder Solubility:Clear and transparent in water. Purity: >99% CAS NO.: 1118-68-9 EINECS No.: 214-267-8 Supplier: ZHENYIBIO N,N-Dimethylglycine is a derivative of the amino acid glycine that can be found in beans and liver. Applied in Healthcare suppliments: 1.N,N-Dimethylglycine can be as an antioxidant and help enhence immunity. 2.DMG supplement may also support the cardiovascular system and aid with athletic endurance. Applied in Animal healthy suppliments: 1.Dietary supplementation with dimethylglycine affects broiler performance and plasma metabolites. 2.DMG supplement is recommended to support oxygen utilization and muscle recovery in horse racing. Applied in Pharmaceuticals: 1.It supports the brain and promotes healthy mood. 2.N,N-Dimethylglycine helps transport oxygen that breaks down glycogen to fuel the ATP cycle, creating energy in the body.
The natural colour of Mango wood is most often golden brown, although there are also variations that have a more yellow tint, or feature black or pink streaks across its surface. The wood is often beautifully discoloured due to 'spalting', where wood can change different colours as a result of fungus
Our company is looking to offer 200 tons of PVC Film Scrap on a regular monthly basis. We wish to work with the reliable PolyVinylChloride Film Scrap buyers from all across the world. Place of Origin : JAPAN, US, EUROPE Materials : Polyvinyl Chloride [PVC] Color : Transparent Application : Film Bag, Box, Packaging Grade : Film Grade Type : Post Industrial Waste Quality : Clean and less than 1% shortage Form : Film Unit : Ton/Tons FOB Price : $400.00 - $600.00 Minimum Order : 20 Tons Payment Term : T/T 50/50 and L/C 100% at sight Estimate Lead Time : 15 - 20 days Origin : Tokyo, Yokohama, Hamburg, New York, Long Beach Supplying Capacity : 200 tons/month Packaging : Bales
Pale yellow liquid at room temperature characteristic odor and taste or nearly odorless, free from rancidity or any objectionable odor and taste. Each batch of materials shall undergo strict sampling,inspection and screening for guaranteeing the affluent oil production and the excellent oil fragrance. Groundnut OIL Taste Neutral Impurities Negative Free Fatty Acid ( % ) max 0,10 Moisture ( % ) max 0,05 Peroxide Value ( meq O2/ kg ) max 5 Specific gravity at 20 degr C 0,91 - 0,93 Iodine value ( g / 100 g ) 82 - 110 Colour Lovibond 5 1/4 " Red max 2,5 Colour Lovibond 5 1/4 " Yellow max 25 C 12:0 C 14:0 (Myristic Acid) C 16:0 ( Palmitic Acid ) 6 - 14 C16:1 (Palmitoleic Acid) C 18:0 ( Stearic Acid ) 1 - 5 C 18:1 ( Oleic Acid ) 35 - 72 C 18:2 ( Linoleic Acid ) 13 - 44 C 18:3 ( Linolenic Acid )
We are exporter of Ferro Molybdenum. Specifications Mo : 60%min C : 0.15%max S : 0.1% max P : 0.05% max Si : 2% max
Indonesia Barecore MANUFACTURER ***** Albazia Falcata Bare Core / Barecore ***** For making Block Board ***** Cutting 13.2mmx1250mmx2500mm ***** Premium export grade ^^^^^ Smooth and Flat Surfaces ***** MC under 13% **** Loading in 40hq = 54 cbm """""payment bank transfer 50% deposit and 50% balance against copy of B/L after shipment released
We Are Indonesia MDF Board MANUFACTURER ## Made from Mix Hardwood Fiber ## Density 720kg-800kg ## Flat and smooth surfaces by well sanded ## Sanding paper number 240 ### High density ***** Usage Furniture components - Decoration ## Housing components ## All sizes available ## Special required sizes can be made ## MOQ 24 cbm in 20ft ## Price range depend on sizes from usd 150/cbm - usd 230/cbm FOB Indonesia main port ## Payment term by Bank transfer 30% Deposit and 70% balance agaist copy of BL only , No L/C accepted due to high Banking cost
We are supplier and exporter of Copper Slag. Copper slag is a low cost expendable abrasive suited for open blast cleaning and due to its low silica content it does not pose the health hazards created by silica sand. Its sharp, hard particles can provide a fast cleaning action and an excellent surface profile. It is available in various sizes Copper slag is abrasive blasting grit made of granulated slag from metal smelting processes (also called iron silicate). Copper slag abrasive is suitable for blast cleaning of steel and stone/concrete surfaces, removal of mill scale, rust, old paint, dirt etc. Suitable for SA-3, SA-2 and SA-2. Copper slag blasting media/grit is manufactured of the granulated slag of copper refineries, and used for blast-cleaning of metal surface. In different industries it is called different names abrasive powder, grit, copper slag grit, mineral grit, grinding grains, etc.
Malto Dextrin is widely used for baking cookies, muffins and other bakery products. It enhances the tenderness and texture. It makes the product soft and lowers the fat content. The Malto Dextrin we supply prevents the formation of crystals on the surface of frozen foods and is used as a sugar substrate in sports drinks. Depending on the depolymerization degree it may be either form-building or leavening agent. It is also easy to digest. TEXTURE & FEATURE: White to cream color fine fluffy powder, free from rancidity and foreign matter. APPLICATION: MALTO DEXTRIN enhances texture and tenderness in cookies, cakes, muffins and other bakery products. Malto dextrin helps to make soft, low-fat bakery product. Also reduced-fat baked goods. It also prevents the formation of crystals on the surface of frozen foods and is used as a sugar substrate in sports drinks. Depending on depolymerization degree it may be either form-building or leavening agent. It's easily digested.
