Item No .: 3002 - 229 Size : 36 - 47 (5-13) Soles : 3002 Double Density PU sole ESD SAFETY FEATURES Abrasion Resistant Anti Skid Anti Static Insole Breathable Fine Leather Heat Resistant Sole Light Weight Oil Resistant Shock Absorber Steel Midsole Steel Toe Cap Water Proof ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Gents Safety Shoes Standard : S3 SRC Sizes : 36 - 47 (5-13) Colors : Black AVAILABLE OPTIONS Product Number : 3002 - 229 Standard : S1, S1P, S2, S3 Toe: Steel /Fibre Glass Midsole : Steel/Metal Free Sole : Dual / Mono Color : Black /brown MATERIALS Upper : Suedo and Microfibre Lining : Textile Toe : Steel Midsole : Steel Footbed / Socks : Moulded Sole : PU/PU Certified : EN ISO 20345:2011 SRA BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No.: 7198 - 02 Size : 36 - 48 Soles : 7198 Double Density PU sole SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Excellent Shock Absorber Fine Leather Light Weight Oil Resistant Slip Resistant Sole Steel toe / Kavlar Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Gents Safety Shoes Standard : S3 Sizes : 36 - 48 Colors : Black AVAILABLE OPTIONS Product Number : 7198 - 02 Standard : S1, S1P, S2, S3 Toe : Steel /fibre Glass Midsole : Steel/metal Free Sole : Dual / Mono Color : Black /brown MATERIALS Upper : Buff Barton Din Lining : Cambrella Toe: Steel Midsole: Steel Footbed / Socks: Moulded Antistatic Sole : 7198 Double Density PU sole CERTIFIED: EN ISO 20345:2011 SRA * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. * Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Insulating glass machine Insulating glass machine, insulating glass machines, insulating glass machinery, insulating glass line, insulating glass equipment, insulating glass equipments Shape glass low-e insulating glass production line Automatic control for low-e glass (2-brush treatment for low-e) Automatic adjust function for pressing with hydraulic compression Titling table with hydraulic pressure Monitor using system temperature/speed/production volume Mechanical trouble cheek Whole line control function with 1 monitor Technique parameter Max. Glass size 2500f¯3500mm Min. Glass size 300f¯500mm Glass thickness 3-50mm Thickness of washing glass up to 60mm Max.In washing section 12m/min Max.In accelerating 50m/min Brush 4pair(low-e) Power voltage 3p 41.5kw(380v)/50-60hz Size of line 25000f¯2560f¯3380mm Power rate 20.6kw Size of line 25000f¯2560f¯3380mm
Clear float glass, tinted glass, reflective glass, tempered glass, laminated glass, insulated glass, antiquin glass and mirror, silver mirror, glass block.
Max size : 3660*2440 Min size : 245*180 Width of aluminum frame : 6mm, 8mm, 9mm, 12mm, 15mm, 20mm Thickness 4+6a+4 - 19+20a+19 Output : 750000 m2/year Standard : as/nzs 4666:2000
Insulating glass is manufactured by two or more than two pieces of glass. The different pieces of glass are isolated through aluminum tubes whose insides are filled with desiccant. The hollow space is inflated with dry air or inert gas and sealed with butyl rubber, polysulphide sealant, or structural adhesive, to form glass with dry space. Benefits Excellent solar heat insulation property which greatly reduces cooling loads; Dry air inside the enclosure renders the surface free from misting; More excellent efficiency will be if fill in argon other inert glass. Specification Air space: 5mm, 6mm, 9mm, 12mm, 15mm; Max. Size: 2700mm X3700mm; Thickness: 5+9A+5mm, 6+12A+6mm, 15+15A+15mm, etc. Applications As modern architecture and curtain wall glass develop, especially higher requirements are put forward for energy conservation, insulating glass has been widely applied in buildings, vehicles, freezers, as well as occasions which can provide quite and comfortable indoor conditions at constant temperature and with constant humidity.
Glass wool is manufactured with quartz sand,feldspar,sodium silicate and boric acid as main Ingredients ,which are melted under high temperature and made into fibers thinner than 6um. We can offer Glass wool batts,glass wool blanket,glass wool board and glass wool pipe. Rock Wool is produced by melting mix of basalt,limestone&coke in a special vertical furnace at very high temperature(about1500°C).Then the molten rock is made into thin fibers through a high speed centrifugal machine. After adding certain amount of binder,dust proof oil,silicon oil and mechanical operations,rock wool fibers are then processed to be the final desired product with specified physical and chemical Properties and specifications.
Patterned glass, also known as pattern glass or texture glass. It has a good decorative effect, privacy, and good light transmission. According to its perspective, it can be divided into almost transparent and visible, slightly transparent and visible, almost obstructing invisible and completely obstructing invisible. Application: suitable for bathrooms, indoor space, doors, office partition, cabinet, furniture,and windows and various occasions where need the daylight and also need to block of sight. Thickness: 4mm,5mm,6mm Size: 1830 2440mm,2000 2440mm,1830 3300mm Process: Tempered, Back mirroed. Maq: one case.
Sealed insulated glasses.
Glass insulators.
Tempered glass.
Insulated glass..
Insulated glass.
Insulated glass, aluminum spacer, mill finish aluminum spacer, painted aluminum spacer, georgian bar, aluminum spacer production line.
Insulating glass.
Building glass, float glass, exact clear float glass, tempered glass, laminated glass, double glass, insulated glass.
Glass lined reactor, jacketed, 50L-80000L capacity, two pieces type (i.e. FK, open type) and one piece type ( i.e. FF, closed type), with good anti-corrosion performance widely to be used in the reaction, neutralization, and polymerization etc process: 1. The detailed assembling of our Glass lined reactor: (1) Electric Motor: Explosion-proof, Ordinary type; (2) Reducer(i.e.gear box): Cycloidal-pin wheel type, Spiral bevel gear type, Helical gear type; (3) Seal type: Packing seal, Mechanical Seal (single type, double type); (4) Agitator: Frame type, Anchor type, Impeller type, Paddle type, combination type; (5) Thermometer Pocket: A type (Straight); B type (Slant), C type ( Slant with Wing); (6) Bottom discharge Valve: Upper extension type, 2. The technical performance of our Glass lined reactor: (1)The working pressure: Inside the vessel: less than or equal to 1.0Mpa (for Packing seal: less than or equal to 0.2Mpa; for Single mechanical seal: less than or equal to 0.4Mpa, for Double mechanical seal: less than or equal to1.0Mpa); Inside the jacket: less than or equal to 0.6Mpa; (2) The working temperature: from -20 degree centigrade to 200 Celsius degree, the cooling shock: 110 Celsius degree, the thermal shock: 120 Celsius degree; (3) The Glass-lining thickness: 0.8-2.0mm; (4) The high Voltage-test to the Glass-lining: 20KV. (5) Nonstick: the smooth and clean glass-lining surface is nonstick to the materials. (6) Anti-corrosion performance: suitable for all kinds of organic or inorganic acids, organic solvents and weak alkaline etc. Besides Glass lined reactor, we also make Glass lined storage tank 200L-50000L, distiller 300L-6000L, condenser and dryer etc, certified by ISO900 and as one world class manufacturer & supplier of Glass lined equipments in china, we promise our products in high quality with favorable price and excellent service, select us, select trust, please contact us for more details, thanks.
Its furnace life, energy consumption and product quality keep leading position in china market. Especially the low energy consumption which can save 10% the same cost of furnace, making it the competitive advantage of zgiec over other competitors.Zgiec can design for clients according to their detailed requirements for glass furnace. According to specific equipment conditions
Brief introduction Glass wool is a kind of insulation materials which is made of natural ores, such as quartzite, dolomite, feldspar, limestone and so on. With the features of low density, fireproof, thermal insulation, the glass wool has found a wide utilization in the fields of petrochemical industry, architecture, etc. The capacity of the glass wool production line is 2000-20000 tons per year. The raw material is cullet, feldspar, dolomite, calcined soda, borax, limestone, others. The fuel could natural gas or heavy oil, etc. Production process The glass wool production line is a complete set of machinery. The raw materials added with auxiliary agents such as calcined soda and borax are melted into glass fluid in the tank furnace. The lava is drawn, blown or thrown into very thin fibers under centrifugal force of the spinner. The forming fiber will be collected to be original blanket by wool collecting machine. The original felt is sent into the curing oven to be solidified and shaped by the conveyor. After curing, the products will go through the cooling section. It will be cut by slitting cutter and cross cutter according to the setting length. Finally, it will become the final products such as board, blanket. We could provide a series of service including the project consultancy, technical support, installation and commission, employees training, system maintenance, technology upgrade, etc. we warmly welcome you to visit our company. Equipment introduction Melting system This production line adopts tank furnace which is made up of different refractory materials and uses natural gas as fuel. Fiber forming system Centrifuge could produce glass wool fiber from vitreous fluid. It is the key equipment of the whole production line and decides the quality of the final product. Glass wool collector Glass wool collector could collect fibers into crude felt which is then sent to curing oven via the transition conveyor. Curing oven Curing oven could heat and shape glass wool layers containing binder as per the density, size required for products. It could make binder and fibers polymerize into one, producing glass wool blanket and board. Conveying and cutting machines The conveying machine could convey the cured glass wool products to the cutting system and cool the products at the same time. The cutting system could proceed longitudinal and crossing cutting to make required products. Blanket / felt-rolling machine It could roll the glass wool blanket into rolls and facilitate the packing of product. PE film, Container
1. Suitable for gross ribbon width: 2000mm-5400mm 2. Suitable for gross ribbon thickness: 1.5mm-20mm 3. Linear speed of annealing lehr roller: 80-1500m/h (stepless speed variation) 4. Diameter of annealing lehr roller: 216mm-365mm. . Linear speed of annealing lehr roller: 80-1500m/h (stepless speed variation) 4. Diameter of annealing lehr roller: 216mm-365m.
