Iron Sintered Self Lubricated Bushes Parts Suppliers and Manufacturers

The Guava (Psidium guajava) is a tropical fruit with a white or pink fleshy interior interspersed with small hard seeds. It contains a considerable amount of perctin. Guava is high in ascorbic acid (100 to 200 mg/100) If would be difficult to find any place in India where the guava tree does not flourish naturally. A guava tree will produce fruit for over thirty years. There are two varieties white and pink. In many parts of India guava is harvested by hand all year round. While white guava, which is sweeter in taste, is grown on a larger scale, the pink is considered a delicacy. Being a tropical fruit, the market for fresh guava is emerging in Europe and the United States. However, because of the unique flavor, distinct texture and rich. Guava (White/Pink) Pulp T.S.S (Brix) Min- 9 Acidity (%C/A) Min- 0.4 Composition per 100 gm Edible Portion (%)- 100.00 Moisture (gm)- 81.70 Protein (gm)- 00.90 Fat(gm)- 00.30 Minerals (gm)- 00.70 Fibre (gm)- 05.20 Carbohydrates (gm)- 11.20 Energy (K.cal)- 51.00 Calcim (mg)- 10.00 Phosphorus (mg)- 28.00 Iron(mg)- 01.40 Vitamin c (mg)- 160.00 Vitamin B (mg)- 00.46

HMS Scrap /Heavy Melting Scrap (HMS1 / HMS2) /HMS1 HMS 1&2 Shredded HMS Bundle Steel Scrap Backed by huge industry knowledge, we are presenting a supreme quality range of HMS Scrap (1 & 2) to our highly valued consumers. These range of HMS Scrap are highly acclaimed for its high durability, tensile strength and exhibits superior resistant to adverse conditions. We test each and every product before release by various industrial parameters by our quality analyst. Client purchase these at reasonable rate. HMS 1/2 SCRAP / METAL SCRAP / HEAVY STEEL SCRAP / /Heavy Melting Steel Scrap Metals for sale. We can supply you HMS scraps, HMS 1, HMS 1/2, Used rails scraps. Chemical Composition: C:0.06 - 0.082% Mn:0.75 - 1.05% SI:0.13 - 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15% We have Used Rails | HMS 1:2 ISRI CODE R50-R65 Composition C - 0.54-0.82%, SI - 0.18-0.40%, MN - 0.60-1.05%, S - 0.04% maximum P - 0.035% maximum AS: - 0.01% Maximum of Mass Share HMS is usually traded as a blend of 1 & 2, either a premium blend (80:20) or lower grade mixes (70:30) and (60:40). C:0.06 - 0.082% Mn:0.75 - 1.05% SI:0.13 - 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15% Used clean rail, without slag, dross, trash, wood, plastic, oily parts, grease, alloy, prohibited goods, whole sets of machine and usable parts for machines, cast iron, motor turning blocks, engine blocks, war and explosive for armour plated materials, mud or wastes and maximum harmless impurities is less than 0.1%;

We at Airatrex take pride in offering cutting-edge gearbox solutions that meet the diverse needs of industries worldwide. Our gearboxes are engineered for precision, durability, and optimal performance, ensuring seamless integration into various applications. Explore the world of power transmission with our exceptional gearbox solutions.

We supply all types of industrial pressure transmitter

Simple / easy maintenance, No down time, No loss of production Provides torsional vibration isolation & damping No metal to metal contact, hence electrically insulated Low initial, operation & replacement cost No lubrication Long life

We provide our fasteners for Light to Heavy Enginnering Industries, Electrical & Electronics, Telecom, Automobiles, Fertilizers & Chemicals, Hydrualics & Pneumatics, Aeronautics, Pumps & Valves, Air - Condition & Refridgeration, Cement, Sugar, Machine Tools, Packaging, Textile, Pharmaceutical, Plastic Injection Moulding Machineries, etc. industries. Our wide range of Standard and Non - Standard Products offers a reliable source for various industrial requirements with World Class Quality.

The range caters for almost all possible Medias, working Pressures up to 700 Kg/Cm2 and Temperatures up to 800ºC.

Airatrex Has Rapidly Established Itself As A Strong, Reliable And Trustworthy Supplier For Wide Range Of Bearings. Ideally Suited To The Engineering, Maintenance And Manufacturing Markets Ball Screw Support Barrel Roller Bearings Cam And Roller Follower Crossed Roller Bearings Cylindrical Roller Bearing Deep Groove | Radial Ball Bearings Double Row Angular Contact Double Row Self Aligning Linear Bearings Plummer Blocks

Ball Valves Screwed / Socket Weld / Butt-weld / Flanged Ends : Ball valves are designed and manufactured to provide maximum service life and dependability. Three Piece and Two Piece design Ball Valves ensure efficiency, reliability and economy. Pneumatic Operated Ball Valves and Electrical Actuated Ball Valves are maintenance friendly and suitable for on-line maintenance . Butterfly Valves High Performance Butterfly Valve 150LB/300LB/600LB ,wafer type with integrally moulded elastomeric body sleeve are designed for longer life and trouble free performance. Gate Valves ATSIPL distributes a full line of Gate Valves, including Wedge Gate Valves, Knife Gate Valves, Lined Gate Valves, Resilient Seated Gate Valves and more. Gate Valves are available from 1/2â?³ through 24â?³ and larger in various material options.

We Supply Wide Variety Of Pumps To Our Valued Customer All Over The World. Our Customers Manly From Power, Steel, Sugar, Paper, And Chemical Industries. Few Types Of Pumps Are Listed Below. Please Refer Our Brands Section For Checking Out Our Pump Brands End Suction Pumps Split Case Pumps Multi Stage Pumps Sump Pumps Vacuum Pump Submersible Pumps

Being one of the leading organizations, we are able to offer premium quality cables. The cable, which we offer are manufactured by our skilled professionals using supreme grade materials and components. Modern techniques are adopted to manufacture strong cables that can handle extreme conditions. All these cables are examined before delivery to ensure the well-being of our customers. Furthermore, we are able to deliver these cables within a specific time-frame and offer at a reasonable price. Following are few types of cable we are supplying to our happy customers all over the globe.

We offer comprehensive range of cable accessories for all cable types. The most innovative utilities and industries around the world, including mining, marine, offshore and nuclear, use our power cable accessories. Designed to withstand environmental extremes and high pollution levels over long operating lifetimes, they help maintain service reliability in both overhead and underground installations

Major Types of Natural Rubber 1. Hevea Rubber (Hevea Brasiliensis) - The primary raw material for natural rubber comes from the Hevea tree (Hevea Brasiliensis), mainly cultivated in Southeast Asia, particularly in Thailand. 2. Sumatra Rubber - Rubber is also produced in Sumatra, Indonesia, serving as another globally significant production region. Natural Rubber Supply Chain Process: 1. Cultivation and Harvesting: 2. Processing and Production: 3. Domestic and International Trade: 4. Product Manufacturing: Applications of Natural Rubber 1. Automobile Tires: - Natural rubber is a key raw material for the manufacturing of automobile tires due to its excellent wear resistance and elasticity. 2. Shoe Soles: - Widely used in the production of shoe soles, providing cushioning and durability during walking. 3. Industrial Products: - Utilized in a variety of industrial products, serving as vibration control materials and sealing materials. 4. Medical Devices: - Used in the production of medical gloves and some medical devices due to its flexibility and biocompatibility. Applications of RSS (Rubber Smoked Sheet) and TSR (Technically Specified Rubber): 1. RSS (Rubber Smoked Sheet): - Automobile Tire Manufacturing: - RSS is extensively used in the production of high-end automobile tires due to its excellent physical properties and quality, making it a reliable material for tires that require high wear resistance and durability. - High-Quality Products: - Additionally, RSS is employed in the manufacturing of other high-quality rubber products, including industrial goods, luxury consumer goods, and some medical devices. 2. TSR (Technically Specified Rubber): - Automobile Parts Manufacturing: - TSR products are widely used in the manufacturing of automobile parts. In components requiring vibration control, such as engine mounts and bushings, TSR is selected for its specific properties. - Industrial Applications: - Used in the manufacturing of industrial products, TSR is an ideal material for products where the flexibility and elasticity of rubber are essential. - Medical Devices: - TSR is also used in some medical devices, playing a crucial role in the production of medical products due to its biocompatibility.

EN590 was introduced to coincide with the development of new emissions standards across the European Union. The overall goal has been to reduce the sulphur content of diesel fuel. Sulphur had been used as a lubricant in the fuel. Its role is taken by special additives in ULSD. Since 2007, diesel that conforms to EN590 has been referred to as Ultra Low Sulphur Diesel (ULSD) in the European Union. The phrase Ultra Low Sulphur Diesel is governed by different standards in other parts of the world. EN590 describes the physical properties that all automotive diesel fuel must meet if it is to be sold in the European Union, Croatia, Iceland, Norway and Switzerland. The EN 590 had been introduced along with the European emission standards. With each of its revisions the EN 590 had been adapted to lower the sulphur content of diesel fuel since 2007 this is called ultra low sulphur diesel as the former function of sulphur as a lubricant is absent (and needs to be replaced by additives). The quality of European diesel fuels is specified by the EN 590 standard. While these specifications not are mandatory, they are observed by all fuel suppliers in Europe. Automobile diesel en 590 is intended for application in diesel engines. Diesel motor fuel quality meets the requirements of European Standard EN 590. For operation in the conditions of a temperate climate following marks of fuel diesel automobile EN 590 are offered: Grade C limiting filterability temperature -5 C; Grade D limiting filterability temperature -10 C; Grade E limiting filterability temperature 15 C; Grade F limiting filterability temperature -20 C. The entire volume of produced diesel fuel quality meets the requirements for fuels for vehicles of Euro 4 and Euro 5. Low sulfur content in diesel EN 590 reduces emissions of sulfur oxides into the atmosphere, which is especially important for for inhabitants of big cities.

Diesel Gasoil EN-590 10PPM is a premium-grade diesel fuel that meets the stringent European Union standards for quality and environmental performance. With a maximum sulfur content of 10 parts per million (PPM), this ultra-low sulfur diesel (ULSD) offers exceptional cleanliness and efficiency, making it an ideal choice for modern diesel engines. Key Features: Ultra-Low Sulfur Content: Contains only 10 parts per million of sulfur, ensuring reduced emissions and enhanced environmental sustainability. High Energy Density: Provides superior energy density, resulting in improved fuel efficiency and engine performance. Engine Compatibility: Compatible with a wide range of diesel engines, including modern high-pressure common rail (HPCR) systems, ensuring optimal performance and reliability. Enhanced Lubricity: Formulated with additives to enhance lubricity, protecting critical engine components and prolonging engine life. Cold Weather Performance: Engineered to perform well even in cold weather conditions, with excellent cold flow properties for reliable starting and smooth operation in sub-zero temperatures. Benefits: Environmental Sustainability: By significantly reducing sulfur emissions, Diesel Gasoil EN-590 10PPM helps mitigate air pollution and minimize environmental impact, contributing to a cleaner and healthier environment. Improved Engine Performance: With its clean-burning properties and high energy density, this diesel fuel ensures optimal combustion, resulting in increased power output, reduced fuel consumption, and lower maintenance costs. Compliance with Regulations: Meets the strict quality standards set forth by the European Union for diesel fuel, ensuring compliance with regulatory requirements and avoiding costly penalties. Versatility: Suitable for a wide range of applications, including transportation, industrial, agricultural, and commercial use, providing versatility and reliability across various industries. Target Audience: Transportation Companies: Ideal for trucking companies, logistics providers, and fleet operators seeking to optimize fuel efficiency and minimize emissions in their diesel-powered vehicles. Industrial Users: Suitable for use in generators, machinery, and equipment in various industrial settings, offering reliable performance and compliance with environmental regulations. Commercial Businesses: Suitable for use in commercial vehicles, construction equipment, and agricultural machinery, providing dependable fueling solutions for daily operations. Make the Switch to Diesel Gasoil EN-590 10PPM and Experience Cleaner, More Efficient Diesel Power!

Hastelloy G-30 is a high chromium nickel-base alloy which has superior corrosion resistance over most other nickel and iron-base alloys in commercial phosphoric acid as well as many complex environments containing highly oxidizing acids such as nitric/hydrochloric, nitric/hydrofluoric and sulfuric acids. It has good resistance to localized corrosion and to both reducing and oxidizing aqueous media. In addition to its excellent corrosion resistance, Hastelloy G-30 also exhibits good mechanical properties, such as high strength and ductility. It can be easily formed, welded, and machined using standard processes, making it suitable for a wide range of applications in various industries, including chemical processing, petrochemical, pollution control, pulp and paper, and more. Some of the key features and benefits of Hastelloy G-30 include: Excellent corrosion resistance in highly oxidizing acids and other aggressive environments Good resistance to localized corrosion caused by chlorides and other halide ions High strength and ductility Good formability, weldability, and machinability Suitable for a wide range of applications in various industries Overall, Hastelloy G-30 is an excellent choice for applications that require superior corrosion resistance and high mechanical properties in highly aggressive environments. Its unique combination of chemical composition and mechanical properties make it a versatile and reliable alloy for a wide range of industrial applications. American Standards: AMS 5878: Standard Specification for Hastelloy G-30 Plate, Sheet, and Strip; AMS 5838: Standard Specification for Hastelloy G-30 Bars and Shapes; ASME SB 582: Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy (UNS N06007) Plate, Sheet, and Strip; ASME SB 575: Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Plate, Sheet, and Strip; ASME SB 581: Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy (UNS N06007) Seamless Pipe and Tube; ASME SB 462: Standard Specification for Forged or Rolled Nickel Alloy Pipe Flanges, Forged Fittings, and Valves and Parts for Corrosive High-Temperature Service. We can provide the following the products:Hastelloy G-30 coil; Hastelloy G-30 strip;Hastelloy G-30 plate; Hastelloy G-30 sheets; Hastelloy G-30 tube; Hastelloy G-30 pipe;Hastelloy G-30 flat; Hastelloy G-30 bar BS:HR 202/JIS:NW6030/UNS:N06030/W.Nr:2.4603

Incoloy Alloy 901 is a high-strength, heat-resistant nickel-iron-chromium alloy with excellent mechanical properties and resistance to oxidation and corrosion at elevated temperatures. This alloy is often used in gas turbine engines and industrial furnace components.Conclusion: Incoloy Alloy 901 is a high-strength, heat-resistant nickel-iron-chromium alloy with excellent mechanical properties and resistance to oxidation and corrosion at elevated temperatures. It is commonly used in gas turbine engines, industrial furnace components, and aerospace applications. With its exceptional mechanical properties and chemical composition, it is a reliable and durable material for a wide range of demanding applications. Incoloy alloy 901 is a nickel-iron-chromium alloy with additions of titanium and aluminum. Here are some international standards and specifications for this alloy: American standards: AMS 5660, AMS 5661, AMS 5662, AMS 5700, AMS 5714, AMS 5870, AMS 5898, ASTM B462, ASTM B473, ASTM B649, ASTM B670, ASME SB-462, ASME SB-473, ASME SB-649, ASME SB-670 European standards: EN 2.4662 German standards: DIN NiCrFeTiAl, DIN 2.4662 British standards: BS HR 51 Japanese standards: JIS NW 4899 We can provide the following the form:Incoloy alloy901 coil; Incoloy alloy901 strip;Incoloy alloy901 plate; Incoloy alloy901 sheets; Incoloyl alloy 901 tube; Incoloy alloy 901 pipe;Incoloy alloy 901 flat; Incoloy alloy901 bar BS:HR 51/JIS:NW 4899/UNS:N09901/W.Nr:1.4898 Incoloy Alloy 901 is widely used in gas turbine engines, industrial furnace components, and aerospace applications due to its excellent mechanical properties and resistance to oxidation and corrosion at high temperatures. Some of its typical applications are as follows: Gas turbine engines: Incoloy Alloy 901 is used in the hot sections of gas turbine engines, such as combustion liners, transition ducts, and afterburner parts, where high strength and resistance to oxidation and corrosion are required. Industrial furnace components: Incoloy Alloy 901 is used in the construction of high-temperature furnace components, such as radiant tubes, muffles, and fixtures. It offers excellent resistance to oxidation and corrosion, making it a reliable and durable material for these applications. Aerospace: Incoloy Alloy 901 is used in a variety of aerospace applications, including aircraft engine components, missile components, and rocket motor cases. Its high strength and excellent resistance to oxidation and corrosion make it a popular choice for these demanding applications.