Product name: Vietnam rattan webbing Material: Rattan, plastic. Usage: For rattan furniture Size: With 0.6m X 15 length = 9 square meter Packing: Carton, pallet, big bag, strap or Customized MOQ: 04 rolls Packing: 25pcs/ carton. Each wrap with paper/ Bubble bag in carton box/Customer request Payment : T/T 30% deposit, balance against copy of B/L or L/C at sight, irrevocable Sample time: 7 -10 days Shipment: By Air, by Sea, by Express (DHL,TNT,UPS,EMS,Fed Ex)
Product name: Vietnam rattan webbing Material: Rattan, plastic. Usage: For rattan furniture Size: With 0.6m X 15 length = 9 square meter Packing: Carton, pallet, big bag, strap or Customized MOQ: 04 rolls Packing: 25pcs/ carton. Each wrap with paper/ Bubble bag in carton box/Customer request Payment : T/T 30% deposit, balance against copy of B/L or L/C at sight, irrevocable Sample time: 7 -10 days Shipment: By Air, by Sea, by Express (DHL,TNT,UPS,EMS,Fed Ex)
Product name: Vietnam rattan webbing Material: Rattan, plastic. Usage: For rattan furniture Size: With 0.6m X 15 length = 9 square meter Packing: Carton, pallet, big bag, strap or Customized MOQ: 04 rolls Packing: 25pcs/ carton. Each wrap with paper/ Bubble bag in carton box/Customer request Payment: T/T 30% deposit, balance against copy of B/L or L/C at sight, irrevocable Sample time: 7 -10 days Shipment: By Air, by Sea, by Express (DHL,TNT,UPS,EMS,Fed Ex)
Product name: Vietnam rattan webbing Material: Rattan, plastic. Usage: For rattan furniture Size: With 0.6m X 15 length = 9 square meter Packing: Carton, pallet, big bag, strap or Customized MOQ: 04 rolls Packing: 25pcs/ carton. Each wrap with paper/ Bubble bag in carton box/Customer request Payment: T/T 30% deposit, balance against copy of B/L or L/C at sight, irrevocable Sample time: 7 -10 days Shipment: By Air, by Sea, by Express (DHL,TNT,UPS,EMS,Fed Ex)
Product name: Vietnam rattan webbing Material: Rattan, plastic. Usage: For rattan furniture Size: With 0.6m X 15 length = 9 square meter Packing: Carton, pallet, big bag, strap or Customized MOQ: 04 rolls Packing: 25pcs/ carton. Each wrap with paper/ Bubble bag in carton box/Customer request Payment: T/T 30% deposit, balance against copy of B/L or L/C at sight, irrevocable Sample time: 7 -10 days Shipment: By Air, by Sea, by Express (DHL,TNT,UPS,EMS,Fed Ex)
Rattan cane webbing is a handcrafted product. The artisans select the straight and soft rattan cane to weave into the webbing. While weaving, the artisans have to calibrate the net meticulously to make each pattern uniform in the net. Therefore, it takes more than 10 days for one artisan to knit a long rattan webbing sheet with the dimension: 45 centimeters wide and 15 meters long. The final product is beautiful and durable to the time. Moreover, this product is easy to clean and maintenance. Product name: Rattan webbing. Usage: For rattan furniture. Dimension: Width 45cm, 60cm, 70cm, 90cm,... X 15m length. Packing: Carton, pallet, big bag, strap or customized. MOQ: 10 rolls. Delivery time: 7-30 days after sample approved or according to customer's exact order. Trade Terms: FOB, CNF, CIF
- Wooden trays are designed with a wide surface, can be used for a variety of purposes. Made from rubber wood with beautiful light wood, bring aesthetic to the user. Help living space become more modern and friendly. - Environmentally friendly and safe for health Size: 15-25cm Shape: Square, Round, Animal, rectangle, Oval,... Material: wooden , non-toxic, non-irritation, eco-friendly, durable, lightweight Packing: Carton, pallet, big bag, strap or customized Feature: 100% natural material, eco-friendly, durable, decoration, alternative usage Delivered: Time 35-40 days after receiving deposit or L/C or according to customer's exact order MOQ: 100 pcs Payment: T/T with 50 % deposit and 50 % against copy of original documents or L/C at sight Trade term: FOB, Ho Chi Minh.
Rattan webbing made from rattan core is called reed webbing. These are elegant looking furniture materials that enhance quality. Cane webbing is made from rattan strong enough to support the weight of a sitting person and flexible enough to bend around the sharp corner of wooden frames. Material: Rattan, plastic. Usage: For rattan furniture Size: With 0.6m X 15 length = 9 square meter Packing: Carton, pallet, big bag, strap or Customized MOQ: 04 rolls Packing: 25pcs/ carton. Each wrap with paper/ Bubble bag in carton box/Customer request Payment: T/T 30% deposit, balance against copy of B/L or L/C at sight, irrevocable Sample time: 7 -10 days Shipment: By Air, by Sea, by Express (DHL,TNT,UPS,EMS,Fed Ex)
* PHOSCAST Phoscast : Phosphate Bonded Castables * PURPOSE customers using FBC boilers (Particularly underbed feed FBC boilers) for the protection of inbed coils against erosion potential by applying highly abrasive resistant refractory on inbed coils above fuel feed system. BACKGROUND * Two of such actions are providing special alloy studs on inbed coils and applying highly abrasive resistant refractory on the outer bottom loops of inbed Coils which are above the fuel feed nozzles. * GANESHAS has taken number of approaches to identify the key factors affecting erosion rates with an objective to enhance the life of inbed tubes as well as implementing the corrective action to reduce the erosion rates. Phosphate coatings are often used to protect steel parts against rusting and other types of corrosion * Erosion of inbed coils in fluid bed combustor is unavoidable phenomenon however the rate of metal wastage and thus the life of tubes depends on various factors like ash & fuel properties, design of Combustor / feeding system, flue gas velocities operating conditions etc. It has been also observed that maximum erosion prone inbed coils are those which come above fuel feed nozzles and an area of approximately 1 to 1.5 mts around fuel feed systems are badly affected. APPLICATION Phoscast-90 XR can be applied by ramming with wooden mallet having adequately large head @" dia x 5" length x 10â?? Jong handle). The desired lining or repair thickness is built up in several courses while ramming the mass to uniform thickness. Phoscast refractory should never be trawled to obtain smooth surface; ramming only should finish surface. Any excess mass is to be sliced off with trowel edge and then finished by ramming again for bed coil. Tube application of AFBC boiler, the material pasty mass should be finger pressed into the studs of the tube with maximum force. Finish should be given by pressing the hand palm against material applied, using surgical type thin rubber hand gloves.
Ramming mass is commonly used in metallurgy, building materials, non-ferrous metal smelting, chemical, machinery and other manufacturing industries. Ramming mass is widely used in non-core intermediate frequency furnace and core induction furnace. As an intermediate frequency furnace ramming material, refractory ramming is applied to melt gray cast iron, nodular cast iron, malleable cast iron, vermicular cast iron, and cast alloy steel; to melt carbon steel, alloy steel, high manganese steel, tool steel, heat resistant steel, stainless steel, molten aluminum and its alloys; to melt red copper, brass, white brass, bronze and its alloys, etc. Induction furnaces are used for melting cast iron, mild steel and various alloy steels in foundries and making of steel in mini steel plants using sponge iron The refined high silicon, low iron quartz sand and quartz powder are selected and the fused quartz sand is added as the refractory material., with no slag, no crack, damp proof, convenience of repair, and the corrosion resistance, thus greatly improving the furnace service life span and the economic benefit.. Silica ramming mass can safely be used up to an operating temperature of 1600 deg C. Since it expands very little, it is superior to both alumina and magnesia refractories to resist thermal shocks Acid ramming material is the premixed ramming mass of the lining material. The acid ramming mass is used to smelt a series of metal materials such as ordinary steel and carbon steel. The lining practice best suited to a particular furnace depends upon the capacity and design of the furnace, operation practice adopted during making of a heat, and furnace output.
Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
For larger repairs to car bodies, boat hulls, fiberglass parts, plastic housings and sheet metal parts. Can be applied in several layers. Fast-curing, sandable, easy to use. Includes fabric and hardener. Polyester repair resin is a highly reactive polyester resin - suitable as a fiberglass laminate for repair purposes - adhesion to other polyester resins - adhesion to almost all metal surfaces. For repair purposes such as rust holes in metal surfaces, e.g. car bodies. For repairs to plastic parts e.g. bumpers, GRP parts. DOSAGE: Add 2-3% by weight of hardener paste. Avoid overdosing the hardener paste. This can lead to bleeding and color changes in the top coat system. POT LIFE: At +20C room temperature, approx. 7 minutes. REACTION TEMPERATURE: at least +5C. APPLICATION: by brush YIELD: 3 times the mat weight or 1 time the fabric weight.
Automatic series for customized Spider hand delta robot for Parallel robot-3c industry, Parallel robot - food industry, Parallel robot - medicine industry, Parallel robot - Daily Chemical Industry, Other standard automation systems : Automatic bagging, automatic sorting, automatic packing, automatic palletizing, automatic palletizing and automatic loading ... any want to automaitc same this kind ,offer training after-sale service ! whole life maintenance!
Our respected clients can avail us a quality range of Broiler Quail Finisher Feed, which is processed under hygienic conditions. Apart from this, these offered products are pure and effective feed.� Also, our offered assortment of this product is available at competitive prices. Product Details: Crude Fat 3 % Crude Protein 24 % Biotin 0.025 mg/lb Metabolizable Energy 1327 Kcal/lb Moisture 12 % Niacin 17.50 mg/lb Pantothenic Acid 7.50 mg/lb GENERAL DETAILS Ingredients :� Corn Gluten Meal, Wheat Gluten, Soy Meal, DDGS, Grains, Pluses, Essential Amino Acids, Vitamins, Minerals, Trace Minerals, Toxin Binders and Mold Inhibitor Ingredient Profile :� 100% Vegetarian Moisture (% Maximum) - 12 Product Form :� Coarse Mash Form Product Branding - HAF Net Weight :� 39 Kgs When Packed Product Pricing :� On Unit Basis (for each 39 Kgs Packing) Production Capacity per Day :� 450 MT/Day Factory Visit :� Not Permissible Fumigation :� Aluminum Phosphide or Methyl Bromide (or any as per buyer specification) Clinical Test Methodology :� As per IS:2052 Proximate Analysis on Dry Matter Basis Our respected clients can avail from us a quality proved the range of� Broiler Quail Finisher Feed,� which is processed under the hygienic conditions. Apart from this, these offered products are pure and effective feed.� Also, our offered assortment of this product is available at competitive prices.
Pine timber, pine wood logs, beech lumbers, icumsa 45, spruce logs, ash logs timber, structural pine lumber, oaks lumber and timber, azobe wood logs, tali wood logs, teak wood logs, sapeli timber, obeche wood logs, paddock wood logs, rice, wheat grains, yellow corn, maize , aluminum scrap, scrap metals, copper millberry scrap, copper scrap, aluminum wheels,, frozen chicken, chicken parts, chicken paws, whole chicken, sunflower oil, edible oils, face mask, nitrile gloves, surgical face masks, surgical gowns, a4 papers, iron rods, deformed iron rods, cement, wood pellets, wood pallets, ash wood logs and timber, yellow pine, icumsa 45, sugar.
Steel frame screens are mostly applied to the shale shakers with wedge fastening equipment. The screen frames adopt that high-strength square steel tube welded to multi-ribbed construction. They are sturdy and reliable. These screens are constructed with two or three stainless steel layers bonded to a steel support plank. Accessary rubber plugs may be used to repair rips or tears. By doing this, we can cut down time and reduce the production costs. We can supply steel frame screens with mesh sizes ranging from 20 to 250. Steel frame screen is in common used presently, that are constructed mostly withe two or three stainless steel layers bonded tightly to the steel frame.The frame is made up of the high-strength square steel tube or flat steel welded to multi- ribbed construction.These layers are coupled with the frame through metal backing plate or bonded straightly as well.We possess the strong experience and the ripe technology,and will provide various specifications of steel frame screens to serve the clients' demands. Features of Steel frame screen 1. Different layers with different density. To arrange these layers reasonably and exactly, the screening effect will become more and better. 2.High strength frame, multi-ribs and the mesh cloth with moderate tension , from one reliable combination , which can increase screen�??s acceptable flow , the intensity and the lifetime 3.The wedge-shaped fastening device, can make the erection of screens more handily and quickly 4.The mesh divided into many independent small units by grids of the backing plate ,can prevent rips or tears from spreading overmuch. Accessory prepared rubber stoppers can be used to repair damage. By doing so, the operator can cut down the stop time and reduce the cost.