Micropowr hall sensor ah3662 Hall sensor Hall switch Features Micropower designing; Rated supply voltage , 2.4 v ~ 5.5 v; Omnipolar operating, no , nor , spole in excitation magnetic field, high magnetic sensitivity, highly symmetry in positive and negative magnetic switch point; Built-in dynamic imbalance voltage compensition circuit, high temperature stability, small temperature drift in switch point, resistant to mechanical stress and thermal stress, the power consumption is only 8, w when the power supply is 2.75v; Built-in pull-up resistor; Products meet the eu Rohs instruction 2011/65 / eu and reach regulations 1907/2006 / eu requirements. Outline Ah3662 is a kind of high sensitivity omnipolar micropower hall sensor. The special designing circuit enable the sensor has omnipolar (no , sor , npole) magnetic field excitation function, excellent positive and negative switch symmetry, and bitty average power consumption current. When the magnet (no , sor , npole) is closed to sensor, , , the sensor outputs low level; when the magnet is far away from sensor the sensor outputs high level.
WQ600 ORP Sensor Description WQ600 (Redox) ORP Sensor is a rugged and reliable ORP/Redox measuring device. The sensor is molded to 25' of marine grade cable, with lengths up to 500' available upon request. The WQ600's output is 4-20 mA with a three wire configuration. The unit's electronics are completely encapsulated in marine grade epoxy within a stainless steel housing. WQ600 ORP Sensor Features * Continuous ORP monitoring * Fully encapsulated electronics * 4-20 mA output * Marine grade cable with strain relief * Stainless steel housing WQ600 ORP Sensor Applications Ideal for stream and lake monitoring, aquaculture studies, baseline analyses, mitigation monitoring, and other environmental applications. WQ600 ORP Sensor Specifications * Output: 4-20 mA * Range: -500 to +500 mV * Accuracy: 2% full scale * Maximum Pressure: 40 psi * Operating Voltage: 10 to 36 VDC * Current Draw: 0.2 mA plus sensor output * Warm-up Time: 3 seconds minimum * Operating Temperature: -40 to +55'C
Remote Control Microwave Sensor Microwave Motion Sensors AC Input AC Input Microwave Motion Sensor - Detachable Version + Remote Controllable HNS205 5.8GHz C-band microwave motion sensor, tri-level dimming control. Operating voltage: 120,277V AC, 50/60Hz. Rated load: 400W @ 120VAC, (capacitive)Features 5.8GHz C-band microwave motion sensor, tri-level dimming control. Operating voltage: 120,277V AC, 50/60Hz. Rated load: 400W @ 120VAC, (capacitive) 800W @ 200,277VAC, (capacitive) Stand-by power: -
Remote control microwave sensor Microwave motion sensors ac input Ac input microwave motion sensor - detachable version + remote controllable Hns205 5.8ghz c-band microwave motion sensor, tri-level dimming control. Operating voltage: 120277v ac, 50/60hz. Rated load: 400w 120vac, (capacitive)features 5.8ghz c-band microwave motion sensor, tri-level dimming control. Operating voltage: 120277v ac, 50/60hz. Rated load: 400w 120vac, (capacitive) 800w 200277vac, (capacitive) Stand-by power: -
AC Input Microwave Motion Sensors Microwave Sensor AC Input AC Input Microwave Motion Sensor - Standard Version HNS203 5.8GHz C-band microwave motion sensor, tri-level dimming control. Operating voltage: 120277V AC, 50/60Hz. Rated load: 400W@120VAC, (capacitive) Features 5.8GHz C-band microwave motion sensor, tri-level dimming control. Operating voltage: 120277V AC, 50/60Hz. Rated load: 400W@120VAC, (capacitive) 800W @ 200277VAC, (capacitive) Stand-by power: -
AM2322 Temperature and Humidity Sensor Product Overview AM2322 The digital temperature and humidity sensor is a kind of temperature and humidity composite sensor with the output of calibrated digital signal. The special temperature and humidity collection technology is adopted to ensure the high reliability and long-term stability of the product.The sensor includes a capacitive sensing element and a high-precision integrated temperature measurement element, which is connected to a high-performance microprocessor.The product has high quality, super fast response, strong anti-interference ability and high cost performance. AM2322 communication mode adopts single bus, standard I squared C communication mode.Standard single bus interface makes system integration easy and fast.The super small volume, extremely low power consumption, the signal transmission distance can reach up to 20 meters, making it the best choice for all kinds of applications and even the most demanding applications.The I squared C communication mode adopts standard communication timing, and the user can be directly attached to the I squared C communication bus, with no additional wiring and simple use. Two kinds of communication mode is used directly output after temperature compensation, humidity, temperature and the CRC check and other digital information, users need to secondary calculation of digital output, also need not to compensate the temperature humidity, accurate temperature and humidity information can be got.The two modes of communication are free to switch, users are free to choose, easy to use, and should be widely used.The product is 4 lead wire and convenient connection. Special packaging can be provided according to user's demand. AM2322 Temperature and Humidity Sensor Product Features * Super Mini Size Easy Protable * Ultra-low voltage work * Ultra-Low Power State * Excellent long-term stability * Standard And single bus output AM2322 Temperature and Humidity Sensor Range of application Hvac, dehumidifier, testing and inspection equipment, consumer goods, automotive, automatic control, data recorder, weather stations, household appliances, humidity control, medical, and other relative humidity control. AM2322 Temperature and Humidity Sensor Product highlights Completely interchangeable, the cost is low, long-term stability, relative humidity and temperature measurement, signal transmission distance long, digital signal output, accurate calibration, extremely low power consumption, standard single bus digital interface, standard I2C bus digital interface,The mode of communication is free to choose. AM2322 Temperature and Humidity Sensor Sensor performance * Humidity range: 0~99.9%RH * Temperature range: -40 ~ +80'C * Humidity Accuracy: ±2%RH * Temperature Accuracy: ±0.3'C * Humidity Repeatability: ±0.1%RH * Temperature Repeatability: ±0.2'C * Service voltage: 3.1V to 5.5V * Output signal: single bus /IIC signal
DC Input Motion Sensor Module Standard Motion Sensor Module 5V/12V DC Input Microwave Motion Sensor - Standard Version HNS101D 5.8GHz C-band microwave, tri-level dimming function. Input voltage 12V DC (5V & 24V DC version available on request). Input current:25mA. Features 5.8GHz C-band microwave, tri-level dimming function. Input voltage 12V DC (5V & 24V DC version available on request). Input current:25mA. 5V DC PWM output or 0~10V DC signal. Super compact, flexible to be integrated into any suitable fixtures. Dual-PD technology, real Dayligh t m onitoring function for built-in application. 8 pin DIP switch setting, multiple options to meet different customer demands. Detection range up to 12m in diameter. Mounting height: 3~6m. Operation temperature; -20? ~ + 70?. RoHS compliant. Settings Detection range Detection range can be reduced by selecting the combination on the DIP switches to fit precisely each application. Hold-time Hold-time means the time period to keep the lamp on 100% after motion detected. *when hold-time set as 3s, sensor enters into test mode, this test mode is mainly for users to choose the desired detection range. In this mode, the daylight sensor is disabled, when there is no motion, fixture keeps off, when there is motion detected, fixture keeps a cycle of 3s on and 2s off. Daylight sensor Daylight sensor means the daylight threshold to enable or disable the sensor function. "Disable": The sensor works always, even during daylight. w50lux": The sensor works only in twilight. w10lux, 2luxw: The sensor works only in the dark. Stand-by period This is the time period that the lamp remains at a low light level before it is completely switched off in the long absence of people. ?+? means bi-level dimming control, the fixture never switch off. Stand-by dimming level This is the dimmed low light level you would like to have after the hold-time in the absence of people. Daylight monitoring function Utilizing the Dual-PD technology, this sensor can tell the difference of natural light and artificial light(lamp) from behind the diffuser, switch on automatically(even without movements) when the ambient light is below target value, and then switch off automatically whenever the artificial light is not required(ambient light is bright enough). This is the REAL & INTELLIGENT daylight monitoring sensor for built-in installation. Note: Lux-Off sampling time?30s; Lux-On sampling time?10s. Lux-On function takes effect only when standby dimming period set at.
AM2322 Temperature and Humidity Sensor Product Overview AM2322 The digital temperature and humidity sensor is a kind of temperature and humidity composite sensor with the output of calibrated digital signal. The special temperature and humidity collection technology is adopted to ensure the high reliability and long-term stability of the product.The sensor includes a capacitive sensing element and a high-precision integrated temperature measurement element, which is connected to a high-performance microprocessor.The product has high quality, super fast response, strong anti-interference ability and high cost performance. AM2322 communication mode adopts single bus, standard I squared C communication mode.Standard single bus interface makes system integration easy and fast.The super small volume, extremely low power consumption, the signal transmission distance can reach up to 20 meters, making it the best choice for all kinds of applications and even the most demanding applications.The I squared C communication mode adopts standard communication timing, and the user can be directly attached to the I squared C communication bus, with no additional wiring and simple use. Two kinds of communication mode is used directly output after temperature compensation, humidity, temperature and the CRC check and other digital information, users need to secondary calculation of digital output, also need not to compensate the temperature humidity, accurate temperature and humidity information can be got.The two modes of communication are free to switch, users are free to choose, easy to use, and should be widely used.The product is 4 lead wire and convenient connection. Special packaging can be provided according to user's demand. AM2322 Temperature and Humidity Sensor Product Features * Super Mini Size Easy Portable * Ultra-low voltage work * Ultra-Low Power State * Excellent long-term stability * Standard And single bus output AM2322 Temperature and Humidity Sensor Range of application Hvac, dehumidifier, testing and inspection equipment, consumer goods, automotive, automatic control, data recorder, weather stations, household appliances, humidity control, medical, and other relative humidity control. AM2322 Temperature and Humidity Sensor Product highlights Completely interchangeable, the cost is low, long-term stability, relative humidity and temperature measurement, signal transmission distance long, digital signal output, accurate calibration, extremely low power consumption, standard single bus digital interface, standard I2C bus digital interface,The mode of communication is free to choose. AM2322 Temperature and Humidity Sensor Sensor performance * Humidity range: 0~99.9%RH * Temperature range: -40 ~ +80'C * Humidity Accuracy: ±2%RH * Temperature Accuracy: ±0.3'C * Humidity Repeatability: ±0.1%RH * Temperature Repeatability: ±0.2'C * Service voltage: 3.1V to 5.5V * Output signal: single bus /IIC signal
Linear hall sensor ah3509 Hall sensor Hall switch features Rated working voltage 4.5 v ~ 6 v, Operating temperature range: -40 ~ 125; Rail to rail voltage output, rated output current : 6 ma , Variety of package forms and outer packings for your choice. No mechanical contact, no spark, switch signal stability, no shaking moment, high reliability and safety; Products meet the eu rohs instruction 2011/65 / eu and reach regulations 1907/2006 / eu requirements Outline The sensor will pass linear area /nonlinear area/ saturation area during the magnetic induction increases. When there is no magnetic field that applies in sensor (b=0), when the output voltage of sensor is only half of vcc (vcc/2); when n pole faces mark surface of sensor, and be closed to it gradualy (b-, the output voltage begins to decrease, and the voltage doesnt reduce with the increased magnetic field; when the s pole of magnet faces the mark surface of the sensor and is closed to sensor gradualy b+, the output voltage of sensor begins to increase, and it doesnt increase with the increased magnetic field after it reaches saturation voltage.
Compact, intelligent sensors featuring MEMS precision technology for repeatable airflow detection * RoHS / Lead-free and lead solder compatible * Precision uni-directional air velocity detection * Integral passive Dust Segregation System (DSS) * Compact size: 39 (L) x 20 (W) x 9 (H) mm * User friendly â?? no adjustment necessary * Fast-fit feature for large quantity installation Application Examples: Cassette (ceiling / suspended), multi-modular air conditioners Duct connected heating and air conditioning systems Alternative for single point Pitot tube Alternative for thermal dispersion measurement Air & water cooled chillers, indoor packaged AC systems Window / split, multi-split residential AC coolers Air purifiers, dehumidifiers Fan assisted space heaters Air cooled, high power indoor lighting Mission critical PC, Workstation ventilation 19" rack / tray mounted PSU watchdog ventilation systems -
Based on the rugged humirel humidity sensor, GP3516 is a dedicated humidity plug and play transducer designed for OEM applications where a reliable and accurate measurement is required. Direct interface with a micro-controller is made possible with the module�??s humidity linear voltage output. The threaded end ensures proper mounting of the sensor inside te camber. GP3515 is specially suitable for humidity chambers applications. Main features Tests under harsh chemical conditions demonstrate good operation in presence of salt atmosphere, SO2 , H2S, O3, NOx , NO, CO, Softener, acids (H2SO4, HNO3, HCl), HMDS, Insecticide, Cigarette smoke . Threaded end for convenient and proper mounting. Reliability not affected by repeated condensations Full interchangeability. Better than +/-3%RH and +/-0.15°C Typical 1 to 3.6 Volt DC output for 0 to 100% RH at 5 V DC supply Humidity calibrated within +/- 3% RH @ 55% RH Ratiometric to voltage supply within the specified range Resistance to chemical and physical stresses GP3515 has circuit to protect against Electrostatic discharges upto 15 KV air discharge. GP3515 is protected against reverse polarity GP3515 is not light sensitive Additional tests under harsh chemical conditions demonstrate good operation in presence of salt atmosphere, SO 2, O 3, NO, CO,CO2, Softener, Soap, acids. Dimensions: Length: 90mm, Diameter: 19mm , Threading: M18 (Male -)
Specifications: 1) Power Supply: 5V DC 2) Electric current: 2mA (max. 5mA) 3) Temperature operating range: 20 â?? 50 0 C 4) Humidity operating range: 0 â?? 100% Rh 5) Humidity measurement range: 20 â?? 80% Rh 6) Accuracy: 5% Rh (at 25 0 C and 5 V DC) 7) Temperature Storage range: -20 to 85 0 C 8) Humidity storage range: below 85% Rh 9) Size: 34.7 x 21.6 x 10 mm 10) Polarity Protection: Not Provided -
Based on the rugged HUMIREL humidity sensor, GP3515 is a dedicated humidity and temperature plug and play transducer designed for OEM applications where a reliable and accurate measurement is required. Direct interface with a micro-controller is made possible with the moduleâ??s humidity linear voltage and direct NTC outputs. GP3515 is designed for high volume and demanding applications. Main features â?¢ Tests under harsh chemical conditions demonstrate good operation in presence of salt atmosphere, SO 2 (0.5%), H 2 S (0.5%), O 3 , NOx, NO, CO, Softener, acids (H 2 SO 4 , HNO 3 , HCl), HMDS, Insecticide, Cigarette smoke . â?¢ Product free from Lead, Cr (6+), Cd and Hg. Compliant with RoHS â?¢ Reliability not affected by repeated condensations â?¢ Full interchangeability. Better than +/-3%RH and +/-0.15°C â?¢ Typical 1 to 3.6 Volt DC output for 0 to 100% RH at 5 V DC supply â?¢ Humidity calibrated within +/- 3% RH @ 55% RH â?¢ Temperature measurement through NTC 10 kΩ +/- 1% direct output â?¢ Ratiometric to voltage supply within the specified range Maximum Ratings: Parameter Symbol Value Unit Storage Temperature T stg -40 to125 C Supply Voltage V cc 5.25 V DC V dc Humidity Operating range Rh 0 to 100 %Rh Max. output current I peak 5 mA Temperature operating range T a -40 to 110 C Max. Power P d 25 mW Electrical Characteristics: (@23C, @Vcc=5 V DC, RL -
IUS-101 ultrasonic sensor is used to detect whether the vehicles is being or not with the set distance by the way of ultrasonic reflection. The work principle is according to the ultrasonic which was send from up to down by the ultrasonic detector, detect exactly whether every park lot is occupied or not and the information will be sent at last. Features Industrial design Automatic adjust detect distance range, save install time Black and white shell for you choose Advanced ultrasonic detect mode The advanced detection is used. The wrong information is caused by the outside disturbance or the environment changing is hard to be happened like the other detection way of infrared way or microwave With Highly Anti-disturbance capability to avoid wrong judgment. Easy to install and maintain. The adjustable height range is 1.0m to 3.5m. The height brightness diode indicator light indication detective status; 1S or 5S of sign output delay can be choosing through the outer switch. Technical data Operating Voltage: 24VAC/DC Operating temp.: -20 to 6 Storage temp.:-40 to +8 Operating relative humidity: 30%-90% Used condition: installed on the parking lot it usually installed with the probe down in ceiling in a way of suction top. Height range 1.0-3.5m (adjustable)
Engine coolant temperature sensor elongated head contact with the cooling liquid, the temperature of the coolant is detected by the change of the resistance value, and this signal is sent to the ecu, used to detect the engine coolant temperature.The ecu corrects the fuel injection time and the ignition time after receiving the temperature signal. The normal use of the coolant temperature sensor is -30 â° c to 120 â° c, the corresponding output voltage is 0.3v ~ 4.7v.When the ecu detects an output voltage signal beyond this range, you can determine the sensor circuit failure. Weichai water temperature sensor 612600090673/612600090673 Dongfeng tianlong, day kam water temperature sensor water temperature plug / 0281002209 / d5010412450 Weichai europe three cooling water temperature sensor 612600090919/612600090919 Nanchong natural gas engine 36.2d-02012 water temperature sensor assembly (ecu) / 36.2d-02012 Faw xichai engine 6110 accessories water temperature alarm sensor / 3818010-001-0010 Dongfeng warrior accessories eq2050 - water temperature is too low / too high sensor / 3839c21-010 Cummins water temperature sensor diesel generator set temperature alarm switch / 3408627 Natural gas engine water temperature sensor 3602160-55d Heavy duty hau wo lng natural gas engine cooling water temperature sensor / r61540090004 Weichai wp10 water temperature sensor 612600090358 Nanchong natural gas engine water temperature sensor 36.2d-02012 / 36.2d-02012 Weichai engine country 3 efi cooling water temperature sensor 612630060035 Chongqing cummins engine m11 water temperature sensor 4921477 shiyan auto parts city / 4921477
â? Car intake air temperature sensor (IATS) â? Automotive coolant temperature sensor (CTS) â? automobile exhaust gas temperature sensor (Ex-haust Air Temperature Sensor, EATS) â? car was NTC thermistor / temperature sensor Car temperature sensor,Respectively, water temperature sensor,Exhaust | intake air temperature sensor,These types of sensors are thermistors with the same characteristics,The temperature coefficient is negative temperature coefficient.The water temperature sensor is mounted on the engine cooling water passage,Its role is to detect the engine cooling water temperature,The water temperature sensor housing is fully enclosed,Use the change of resistance value to detect water temperature.The signal temperature value generated by the water temperature sensor is input to the ECU,ECU according to the cooling water temperature ignition control,Correction fuel injection amount to real-time control of the engine,To ensure the normal operation of the engine under different conditions. Intake | outlet temperature sensors are installed,Within the housing of the air cleaner box or regulator,The air flow meter or an intake manifold,Used to detect the temperature of the engine inhaled air.As the intake air temperature changes will affect the air density,The hotline, hot film cooling strength and the degree of atomization of the mixture have an impact,Intake air temperature sensor,Provide a signal to correct this effect.
The coolant temperature sensor consists of a negative temperature coefficient thermistor that is very sensitive to temperature changes.When the engine coolant temperature gradually increased,Thermistor resistance will gradually decline,On the contrary increases,When the engine coolant temperature changes,The output voltage of the sensor also changes accordingly. Engine coolant temperature sensor elongated head contact with the cooling liquid,The temperature of the coolant is detected by the change of the resistance value,And this signal is sent to the ECU,Used to detect the engine coolant temperature.The ECU corrects the fuel injection time and the ignition time after receiving the temperature signal. The normal use of the coolant temperature sensor is -30 , C to 120 , C,The corresponding output voltage is 0.3V ~ 4.7V.When the ECU detects an output voltage signal beyond this range,You can determine the sensor circuit failure. Weichai water temperature sensor 612600090673/612600090673 Dongfeng Tianlong, day Kam water temperature sensor water temperature plug / 0281002209 / D5010412450 Weichai Europe three cooling water temperature sensor 612600090919/612600090919 Nanchong natural gas engine 36.2D-02012 water temperature sensor assembly (ECU) / 36.2D-02012 FAW Xichai engine 6110 accessories water temperature alarm sensor / 3818010-001-0010 Dongfeng warrior accessories EQ2050 - water temperature is too low / too high sensor / 3839C21-010 Cummins water temperature sensor diesel generator set temperature alarm switch / 3408627 Natural gas engine water temperature sensor 3602160-55D Heavy Duty Hau Wo LNG Natural Gas Engine Cooling Water Temperature Sensor / R61540090004 Weichai WP10 water temperature sensor 612600090358 Nanchong natural gas engine water temperature sensor 36.2D-02012 / 36.2D-02012 Weichai engine country 3 EFI cooling water temperature sensor 612630060035 Chongqing Cummins engine M11 water temperature sensor 4921477 Shiyan Auto Parts City / 4921477
Brand: alean Model: abi100-482 Abi100-1086 Abi100-1408 Abi100-764, Abi100-20412 Maximum length: 204cm Detecting range: 10m/30m/60m/100 selectable
Nominal Current(RMS):200/400/800/1000/1200/2000A Vout@Ipn:+_4.000V Measuring Range:0~+_4000A Supply Voltage DC:+-12-15V Accurancy@Ipn,+25degree Celsius:less than +_1.0% Mounting(mm):40.5 in diameter * Open- loop * Supply voltage: DC +-12~15V * Capable measurement of currents: DC, AC,pulse with galvanic isolation between primary circuit and secondary circuit.
Detection range:2m+_10% Detection target:Opaque object DEtection range regulation:Fixed Response frequency:500Hz All-purpose type ,which can directly substitute the same type of P+F and OMRON Power supply reversal connection protection ;short-circuit protection ,can directly connect with PLC * Newly added current over-load protection Long service life ,high reliability and strong resistance property to environment Red LED indicates that it's available to detect the sensor operating state Newly added metal housing to improve the installation intensity Countermeasure to improve the housing intensity and to solve disconnection * M8 correlation has been trial-produced and promoted IP65 protection structure (IEC specification)