Swimming pool glass filter media Can make different colors. All sizes are available as per your requirements. Recycled glass medium improves water quality for swimming pools, wells, waste water facilities, car washes, etc. Prompt shipment within 3 weeks from order confirmation. Specifications and packaging can be made according to your requirements. Glass filter media regular sizes 0.5-1.5mm, 1-3mm 0.1-0.3mm, 0.3-1.25mm, 1.2-2.5mm, 2-4mm 1-3mm, 2-4mm, 3-6mm, 6-9mm 2-6mm, 6-9mm, 9-12mm, 9-15mm, 20-50mm Other sizes are available per your requirements Glass filter media color Clear, red, yellow, orange, ocean blue, cobalt blue, gemstone blue, green, amber, purple, grey, black, opaque white, gold, silver, copper, etc. Other colors are available per your requirements. Use of glass filter media Construction material: Terrazzo, marble, quartz, ground tiles, road markings. Water filter media, glass filter media, pool filtration glass media, glass Media for sand filters. Decoration: Fireplace, swimming pool, floor surface, glass walls, man-made stone, gardens and landscapes, aquarium,vases. Sand blasting media.
Polarization: 99.80% degrees min Ash by electrical conduct: 0.04% max (on dry weight basis) Ash content: 0.04% max Moisture: 0.04% max ICUMSA 45 RBU: Max (Brazil S.G.S scale) Solubility: 100% dry and free flowing Color: Sparkling white ICUMSA Maximum 45 attenuation index units (ICUMSA method #: 4-1978) Radiation: Within CS-137 of 50 BQ per Kg Granulation: Fine crystal Crop: Latest Magnetic particles: Mg/Kg 4 max SO2 mg/kg 20 max Sulfur Dioxide: 20 Mg/Kg min Sediments: None Smell: Typical and specific for sugar Reducing sugar: 0.05% Max by weight HPN Staph Aureus not detected in 1 gram Maximum AS: 1 P.P.M. Maximum PB: 1 P.P.M. Maximum CU: 3 P.P.M. Substance: Solid Crystal Tolerance: 5% (+/-) CHICKEN PAWS SPECIFICATIONS Quality: Grade A Frozen Chicken Paws Process: BQF Cut at the Level of the joints Meaty and Coating of Normal Fat Average Weight Per Piece: 35 â?? 45 grams Average Length Per Piece: 09 â?? 12 cm Processing: 100% Fresh and Frozen White Skin Shelf Life: 24 months Frozen Requirements: Blast Frozen at -40�°C Stocked and Stored: -18�°C During Transportation: -18 �°C Ice Content: Less Than 0.3% Outer Yellow Skin Off Well Dressed and Cleaned No Black Pads or Ammonia Burns No Bad Smells, No Excessive Blood or Blood Stains No Excess Water No-Broken Bones Fresh and Hard Nail * No Bruises No Feathers * No Hairs Moisture Contents Less Than 2% Production Age: Not More Than 60 days from the shipping date Chemical Burns Presence: No Chemical Burns Black Spot: Less than 1% Broken Bone: Less Than 1% Antibiotics: Presence Not Allowed Pathogenetic Organisms (Including Salmonella): Not Allowed Foreign Substances: Not Allowed * Remanants of Feathers: Not Allowed Frozen Requirement Drainage: 1�°C - 5�°C For 8 hours Moisture Content Less Than 1% Blasted at: -40�°C SIF code: 1, 103, 87, 121, 1001
Hexamethylene or methenamine is a heterocyclic organic compound with the formula (CH2)6N4. This white crystalline compound is highly soluble in water and polar organic solvents. It has a cage-like structure similar to adamantane. It is useful in the synthesis of other chemical compounds, e.g., plastics, pharmaceuticals, rubber additives. It sublimes in vacuum at 280 �°C. Application The dominant use of hexamethylenete tramine is in the production of powdery or liquid preparations of phenolic resins and phenolic resin moulding compounds, where it is added as a hardening component. These products are used as binders, e.g. in brake and clutch linings, abrasive products, non-woven textiles, formed parts produced by moulding processes, and fireproof materials. Medical uses As the mandelic acid salt (methenamine mandelate) or the hippuric acid salt (methenamine hippurate), it is used for the treatment of urinary tract infection. Histological stains Methenamine silver stains are used for staining in histology, Solid fuel Together with 1,3,5-trioxane, used by campers, hobbyists, and relief organizations for heating camping food. Reagent in organic chemistry Hexamethylene is a versatile reagent in organic synthesis. It is used in the Duff reaction (formylation of arenes), the Sommelet reaction (converting benzyl halides to aldehydes), and in the Delepine reaction (synthesis of amines from alkyl halides). Explosives Hexamethylene is the base component to produce RDX
Black and Color Polyester Staple Fiber Solution-Dyed Advantage: Our color fiber is solution-dyed, which provides superior color fastness compared to stock-dyed fibers. The solution-dyeing process integrates the color throughout the fiber, ensuring consistent and durable coloration that withstands challenging environments, including prolonged sunlight, abrasion, and chemical exposure. We can match any sample you provide in terms of both color and quality, collaborating closely with you to meet your specific requirements. Item Types and Grades: Standard Fiber: 1.4D/1.5D x 38mm/51mm: Type: Recycle Color: Black 1.4D/1.5D x 38mm/51mm: Type: Recycle Color: Custom colors available (Red, Blue, Green, Brown, Navy Blue, etc.) 2D/2.5D/3D x 38mm/51mm/64mm: Type: Recycle Color: Black 2D/2.5D/3D x 38mm/51mm/64mm: Type: Solid, Hollow Nonsilicon Color: Custom colors available Usage: Ideal for ring spinning and open-end (O/E) spinning. Colored Polyester Staple Fiber for Nonwoven Products: 2.5D/3D x 51mm/64mm: Type: Recycle Color: Custom colors available 6D/7D x 51mm/64mm: Type: Recycle Color: Custom colors available 12D/15D x 51mm/64mm: Type: Recycle Color: Custom colors available Applications: Suitable for filtration, nonwoven products, interlining pads, and carpets. Low Shrinkage Colored Polyester Staple Fiber: 1.5D x 64mm/76mm/102mm: Color: Black and White Shrinkage: Less than 4% 3D x 32mm/64mm/76mm/102mm: Color: Black and White Shrinkage: Less than 4% 6D/7D x 64mm/76mm/102mm: Color: Black and White Shrinkage: Less than 4% 15D x 64mm/76mm/102mm: Color: Black and White Shrinkage: Less than 4% Applications: Primarily used for needle-punched fabrics such as automotive interior and roof interior fabric. Shrinkage Control: Our standard polyester staple fiber typically has a shrinkage rate of about 9%, with some exceeding 10%. However, we have developed critical technology to control shrinkage, allowing us to supply fibers with shrinkage rates of within 5% and within 4%. The shrinkage test is conducted at 180C for half an hour. Minimum Order Quantity: 20GP per color.
White fused alumian/corundum is an artificial corundum abrasive, the main component of aluminum oxide (Al2O3), and contains a small amount of iron oxide, silicon oxide, etc., the color was white. White corundum high quality alumina powder as raw material, refined crystalline and fused into, there are dense texture, high hardness, high temperature, acid corrosion, thermal stability properties. particles cusp form for use in the manufacture of ceramics, resin bonded abrasives and grinding, polishing, blasting, precision casting, can also be used to manufacture advanced refractory. -Characteristic- 1.High hardness 2.High purity 3.Good self-sharpening 4.Strong grinding ability 5.Acid-alkali corrosion resistance 6.High temperature resistance and 7.Good thermal stability -Application- 1.Spraying and grinding. 2.High-end products, crafts or hardware products surface beautification processing. 3.Precision casting, silicon crystal cutting, advanced refractories and ceramic additives. 4.Bonded abrasives and coated abrasives. 5.Processing harder and stronger tensile strength materials such as quenching steel, alloy steel, high speed steel and high carbon steel. 6.Ultra-precision Grinding and Polishing in Crystal and Electronics Industry, Precise Surface Treatment of Metal and Optical Products 7.Contact media, insulators and precision casting sand.
Steel shot major technological index: Products Steel shot Chemical compositionC0.70~1.20% Mn0.35~1.20% Si>0.40 S
White fused alumina sand was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling. It is white with the main crystal phase alpha-al2o3.The white alumina produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved. 25kg/bag+1mt bag
BFA/Brown fused corundum oxide grit price/emery grain Brown aluminum oxide crystals is made of bauxite/anthracite coal, and smelted in electric-arc furnace of high temperature more than 2000degrees.Abrasives tools made by brown fused alumina are suitable for metal with high tensile (like:steel, malleable iron, bronze etc).and suitable for grinding, polishing, blasting, precision casting etc.Brown aluminum oxide crystal is also used for refractory material. Brown aluminum oxide crystals with characteristics like: high purity, good crystalline liquidity, low coefficient of linear expansion, corrosion resistance, high temperature, high strength. Chemical analysis: Al2O3(min) 92% SiO2(max) 2% Fe2O3(max) 2% TiO2(max) 4% Physical characteristics: color Brown Mohs Hardness 9.0 Melting point 2250â?? Maximum service temperature 1850â?? Bulk density 1.53-1.99g/cm3 Specific gravity 3.6-3.9g/cm3 Purpose: 1.grinding for konescope/glass/monocryst alline silicon/lens/jadeware 2.abrasion-proof material for expressway/airstrip/dock/ parking lot/stadium 3.bonded abrasives and coated abrasives 4.surface preparation and finishing 5.Thermal Spraying(Plasma Spraying) 6.Super Refractories, Ceramics and Tiles 7.Lapping & Micro-blasting applications Other models: Grain 0-1mm 1-3mm 3-5mm 5-8mm Fine powder 0-100mesh 0-200mesh 0-320mesh Grit 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220# Micro powder (FEPA)F230 F240 F280 F320 F360 F400 F500 F600 F800 (JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000
Copper slag is a by-product of copper extraction by smelting. During smelting, impurities become slag which floats on the molten metal. Copper slag is mainly used for surface blast-cleaning. Abrasive blasting is used to clean and shape the surface of metal, stone, concrete and other materials. In this process, a stream of abrasive grains called grit are propelled toward the workpiece. Copper slag is just one of many different materials that may be used as abrasive grit. Rate of grit consumption, amount of dust generated, and surface finish quality are some of the variables affected by the choice of grit material. Internationally the described media is manufactured in compliance with ISO 11126-3[4] The blasting media manufactured from copper slag brings less harm to people and environment than sand. The product meets the most rigid health and ecological standards. SIZES AVAILABLE 0.50 MM TO 1.50 MM 0.50 MM TO 2.50 MM 0.50 MM TO 3.00 MM 0.50 MM TO 4.00 MM 0.10 MM TO 5.00 MM
Electroplating & polishing material.
Specifications Product : Quartz Silica Use : Industrial Use Color : White to Super Snow White Form : Powder & Grains Packaging Type : Small Plastic Bags / Jumbo Bags Packaging size : 50kgs / 1000-1200 kgs Whiteness : 90 to 95% Quartz is made up of a lattice of silica (SiO2) tetrahedral. It is the 2nd most common mineral in the world. Its very hard rock having hardness around 7 on the Mohs scale and its density is 2.65 g/cm3. Quartz is a common constituent of granite, sand stone, lime stone and many igneous, sedimentary and metamorphic rocks. It occurs in hydrothermal veins and pegmatites. Well-formed crystals may reach several meters in length and weigh hundreds of kilograms. The variety of quartz occurs either in translucent or mostly opaque, while the transparent varieties tend to be macrocrystalline. Although many of the varietal names historically arose from the colour of the mineral, current scientific naming schemes refer primarily to the micro structure of the mineral. Colour is a secondary identifier for the cryptocrystalline minerals, although it is a primary identifier for the macrocrystalline varieties. This does not always hold true. Not all varieties of quartz are naturally occurring. Some coloured mineral is produced by heat treatment. At PEEKAY MINERALS only natural Quartz is available. The quartz mineral is usually processed in the grain size of 0 to 6 mm. However, it can further be ground in fine mesh as per buyers' application choice or demand. For commercial classification the qualities of Quartz are governed as identification marks like Glassy, Snow white, White or Semi-white grades. The processing techniques at PEEKAY MINERALS ensures consistent quality, control of size and freedom from impurities at pocket friendly costs. Application: Manufacture in glass Paints and coatings Abrasives Refractories Electronic components As silica in many more applications Features: Free from impurities Controlled size of grains High purity
Specifications Products : Potash Feldspar Use : Industrial Use Color : Pink to White Form : Powder Packing Type : Small Plastic Bags / Jumbo Bags Packaging size : 50kgs / 1000-1200 kgs Feldspar are chemically alumino-silicates. There are several types of feldspar available in the state of Rajasthan (India): Most deposits offer sodium feldspar, potassium feldspar and mixed feldspar. The fusibility of the mineral make it useful raw material for many application and the purity is the indication of better fusibility in the application. The geological context specific to each deposit gives the feldspar a variety of physical and chemical properties, thus providing products for a full-range of ceramic and glass making applications. At mines the deposits are blasted to break up the rock and make it accessible to the diggers and loaders. The material after breaking up are manually sorted to prepare feed stocks and than each lot is tested with a view to providing the process plant with a constant homogeneous supply that is appropriate for the application purposes. The selected material is than transported to the users. The remaining product (R/O) is directly sold in the form of sand to glass manufacturers or ground for ceramic markets. The processing techniques at PEEKAY MINERALS ensures consistent quality freedom from impurities at pocket friendly costs. Application: As fluxing agent in ceramics- tiles, sanitary tableware, and glazes As strength enhancing in glass and glass wool As transparency enhancer in hollow glass, flat glass As fillers in paints, plasters, insulation Features: Free from impurities Good color High strength High Alumina Required sizing
Specifications Products : Hydrous, Water Washed, Classified Use : Industrial Use Color : White to Super White Form : Lumps, Powder, Noodles Packing Type : Plastic Bags / Jumbo Bags Packing Size : 25kgs/50kgs/ 1000kgs Kaolin is a hydrated aluminium silicate crystalline mineral formed over many millions of years by the hydrothermal decomposition of granite rocks. It is a white soft mineral composed primarily Kaolinite mineral having chemical composition of Al2O3.2SiO2.2H2O with minor amounts of quartz, feldspar and sheet silicate minerals (mica, illite, smectite). Hard and soft clays are characterized by its fine particle size, platy or lamellar particle shape and chemically inertness. Clays having fine particle size are described as hard clay. Phyllosilicates being a sub group of silicate minerals that has typically less than 2um in diameter. The combination of platy shape and fine particle size results in improved processibility, improved reinforcement, tensile strength, abrasion and tera strength. After mining the above mineral ore is dressed, dried, pulverized, air-floated, water washed (levitated), calcined and surface modified. As per the application the grades are selected by the end user. The processing techniques at PEEKAY MINERALS ensures consistent quality, control of top-cut and average particle size and freedom from impurities at pocket friendly costs. Application & Features: Ceramics: China Clay is an essential constituent in Ceramics. It is used by almost manufacturer worldwide in Electrical porcelain, Fine China & dinnerware, Floor and Wall Tile, Roof Tile, Pottery, Sanitary ware, Tableware and other engineering products. The properties important for the use of China Clay in Ceramics are Plastic Properties, Drying properties, Firing properties, Firing Color, Electrical properties such as conductivity, dielectric content etc. Our clay permits product to be easily deformed under stress without rupturing and retains shape produced when stress is removed. Due to low water of plasticity, it does not require intense forming pressure to withstand handling/drying and the Green Strength is better. The Firing properties are excellent to produce super white finish. The processed clay is free from grits and all metallic impurities. The particle size is very low and even which keeps drying shrinkage in desired parameters.
Details: 1.Place of original: HENAN 2.Material:AI2O3 3.Real Density: 3.95g/m3 4.Bulk density: 1.75-1.95 g/m3 5.Melting point: 2250 6.Refractoriness:1900 7.Mohs hardness: 9.0 8.Usage: abrasive/blasting/polishing/refractory 9.Packages: 25kg PPbag, 1MT Jumbo bag, pallet, 25kg paper bag or as customer's requirement. 10.Certificate: ISO9001, 11.Sampla: free 12.MOQ: 25ton 13.Color: white. Supply Ability 3500 Ton/Tons per Month. Application: �� 1. Used for free grinding, such as glass industry. 2. Used for friction products and wear-resistant floors. 3. Suitable for resin or ceramic bond abrasive, such as grinding wheel, cutting off grinding wheel, etc. 4. Suitable for refractory, wear-resisting and refractory products. 5. Used for polishing, such as grindstone, grinding block, plate turning, etc. 6. Used for coating abrasive tools, such as sandpaper, emery cloth, sand belt, etc. 7. Used for precision casting, grinding, grinding, polishing mold production.
PS Ball is an abbreviation of Precious Slag Ball, an innovative material that can be produced by rapid cooling of slag which generated from steel making process by means of our own Slag Atomizing Technology (SAT). PS Ball is an environment-friendly material proved by Ministry of Environment. It has superior characteristics compared to sand or copper slag in its compressive strength, hardness and anti-weathering. Reuse of waste (steel slag) into environment-friendly material Various Applications (Physical & Chemical Properties) Prevent Pollution (Received official letter from Ministry of Environment) Superior to sand or Copper Slag on compressive strength, hardness New sources of Environment Technology in 21st century 1.5 MT Jumbo bags
High carbon steel shot is used in the majority of the wheel blast applications and creates a dimpled, peened surface. Only the shotâ??s skin suffers from the impact and very thin flakes will progressively part from the shot, which itself stays round throughout its life cycle. Our steel shot is very durable with high resistance to impact fatigue, giving it an effective and quick cleaning rate. Our high carbon steel shot is used in various applications like; desanding, descaling, cleaning, shot peening etc.. The centrifugal atomization process and double heat treatment at the Airblast plants, as well as continues quality control measures, ensures the shot to be of the highest quality.
High Carbon Steel Grit GP has the lowest hardness in the range of 42 to 52 HRC and is also revered to as angular shot, because the grit will get a round shape during its lifetime. It is mainly used in wheel blast machines and it has good results in the foundry industry because it cleans faster with little increase in maintenance costs and machine parts wear. GP is used for cleaning, descaling and desanding.
Dry sanding abrasivpaper Grit:36#-1500#
Paper roll Grit:36#-1500#
Emery cloth Grit:36#-1500#
