PS Ball is an abbreviation of Precious Slag Ball, an innovative material that can be produced by rapid cooling of slag which generated from steel making process by means of our own Slag Atomizing Technology (SAT). PS Ball is an environment-friendly material proved by Ministry of Environment. It has superior characteristics compared to sand or copper slag in its compressive strength, hardness and anti-weathering. Reuse of waste (steel slag) into environment-friendly material Various Applications (Physical & Chemical Properties) Prevent Pollution (Received official letter from Ministry of Environment) Superior to sand or Copper Slag on compressive strength, hardness New sources of Environment Technology in 21st century 1.5 MT Jumbo bags
Garnet Abrasives have uses such as sand blasting media, water jet cutting, hole drilling & lapping, and making coated or bonded abrasive tools. We provide Garnet Mesh: 10/20, 20/40, 30/60, 40/60, 60/90, 90/120, 120/180, 180/240, 20/25, 25/30, 30/35, 35/40, 40/45, 45/50, 50/60, 60/70, and 70/80.
Material: Abrasive Garnet Sand Size: 0.25 - 2.5 MM Color: Reddish Specific Gravity: 4.0 - 4.1 Packaging Size: 25 Kg / 50 Kg / 1 Ton Packaging Type: HDPE Woven Gunny Bags Transport Type: Land / Sea / Air Transport Sandblasting with Abrasive Garnet Sand - During the surface preparation process, Abrasive garnet is blasted onto the surface of the steel using high-pressure compressed air. It can be found in high-quality coated and bonded abrasives such as abrasive papers, clothing, and wheels. Abrasive garnet sand is a mineral-free, iron-free substance with a wide range of applications. High-pressure water jet cutting is its primary application as abrasive sand. Garnet sand is a good abrasive and a common sandblasting replacement for silica sand. Rounder Garnet Sand is better suited for such blasting treatments.
Shape: Spherical Color: White / Color-Less Bulk Density: 1.5 -1.6g/cm3 Hardness: 5.5 - 6.0 Moh Finishing: Smoothing Melting Point: 600�°C Material: Clear glass Pattern: Solid Plain Packaging Size: 25 Kg / 50 Kg / 1 Ton Packaging Type: HDPE Woven Gunny Bags Transport Type: Land / Sea / Air Transport Application Surface finishing- Glass Bead blasting can be used on an extended range of substances with glass, plastic, metal, and rubber. The littler the glass spheres, the evener the surface; greater spheres produce an extra textured finish. To defend special areas or in detail aquatint resolves, areas can be effortlessly masked with tape. Cleaning- Glass Bead blasting eliminates foreign elements from the external without a dimensional alteration to the surface. A wide range of bead sizes is available. For example: removing paint, degreasing, light corrosion, and nearly any other surface pollutants. Glass beads may also be utilized to make surfaces for paint adhesion, gasket sealing, or lubrication retention. Deburring- Glass Bead blasting removes burrs, and feathered edges, and alternates from portions in an accuracy process. Corners and edges must be deburred with accuracy to assemble and operate correctly. Glass bead blasting promises that no base metal from the exterior is removed. Gentle and finished areas may be easily masked for protection. Shot peening- Peening with this type of abrasive is a less-cost form of generating an unchanging surface coating of crushed stress in alloy materials. Peening turns to combat stress cracks and rust, resulting in a growing life of metal portions. The high degree of chubbiness of our Glass Bead media progresses the performance of stress confrontation processes.
PS Balls are most commonly used as an abrasive for the surface preparation of steel prior to the application of paint coatings. As PS Ball does not contain Free Silica, it is non toxic and in compliance with environmental regulations the world over. Payment terms: Negotiable. Packaging: 1/1.5mt Jumbo Bags. Please contact for best pricing and service.
Condition : Good Quality : Good Storage : Cool and dry place Purity : 100% Specialty : Highly Effective Application: Blasting/ Cleaning Media Color: White Specific Gravity: 3.6 - 3.85 Delivery Time: 1 Day FOB Port: Greater Noida Payment Terms: Cash in Advance (CID), Cash Advance (CA) Main Domestic Market: All India
Blasting Abrasive & Spares - Airless spray machines & spares - Blasting pots & spares - Garnet - Copper Slag Grit - Steel Grit & Steel Shots
Wholesale white corindon for coated abrasives was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling.White corindon is white with the main crystal phase alpha-Al2O3.The White corindon produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved. Purpose: 1.Bonded abrasives and Coated abrasives 2.Floor/Wall Laminates 3.Thermal Spraying(Plasma Spraying) 4.Lapping & Micro-blasting applications 5.Surface preparation and finishing 6.Super Refractories,Ceramics and Tiles 7.Brake linings Available sizes; Grain: 0-1mm 1-3mm 3-5mm 5-8mm Fine powder: 0-100mesh 0-200mesh 0-320mesh Grit: 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220# Micro powder: ï¼?FEPAï¼?F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500 (JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 #6000 #8000 #10000 Chemical analysis: Al2O3(min) 99% SiO2(max) 0.4% Fe2O3(max) 0.2% Na2O(max) 0.4% Physical characteristics: color white Mohs Hardness 9.0 Melting point 2250 Bulk density 1.75-1.95g/cm3 Real density 3.95g/cm3 Contact information E-mail mia@hxabrasive.com Mob 008613592570797 Whatsapp +8613592570797 Wechat 13592570797 Skype Mia Wen
Sand blasting abrasives Fused brown alumina BFA Brown fused alumina is made of bauxite/anthracite coal. Abrasive tools made by brown fused alumina are suitable for metal with high tensile(like: steel, malleable iron, bronze etc).and suitable for grinding, polishing, blasting precision casting, and also for refractory material. Brown fused alumina with characteristics like: high purity, good crystalline liquidity, low coefficient of linear expansion, corrosion resistance, high temperature, high strength.
