2001J Mainline Packers meet the highest standards for testing and sealing joints of mainline sewer pipes with acrylamide, acrylate or urethane gels. Logiball 2001J Mainline Packers meet the highest standards for testing and sealing joints of mainline sewer pipes with acrylamide, acrylate or urethane gels. A thick, reinforced SBR rubber sleeve is bonded to the stainless-steel core and a layer of softer rubber is applied over the seating portion to provide superior seating against rough surfaces. The smooth outer finish reduces the adherence of the grout on the packer. Logiball 2001J Mainline Packers come with two grout ports and a third port dedicated for the test medium (air or water). MAIN FEATURES: Void Pressure Monitoring Systems: Two different void pressure monitoring systems are available to accurately transmit the void test and grouting pressures to a gauge read by the camera or through a pressure transducer. The conventional localized sensor is recommended for acrylamide and acrylate grouts. The in-wall water chamber sensor is recommended for stickier grouts such as urethane gels and polyurethanes. The 2001J Packer can be ordered with both systems or one of the two as needed by customer. Dedicated Test Port: By using a dedicated hose from the truck to the packer for the test medium (air/water), â??Hâ?? blocks are eliminated and the mixing ratio of the two-part grout is kept constant (no flushing of the catalyst when testing). Features Three-Function Adjustable Rubber Check-Valve: They provide added safety against syphoning the tanks and unwanted backflow contamination into the hoses, and provide a good mixing of the two-part chemicals through the fan like stream of the opposed and adjacent ports. The Autotesting Concept: When inflating the 2001J packers, the ends first seal against the pipe wall, while its central portion progressively expands, trapping air and water, and compressing it into the mixing chamber. The pressure in the chamber is transmitted through the improved liquid filled sensor and/or the in-wall water chamber sensor to a gauge or transducer installed on the packer. The operator can tell if a joint is obviously good or not by simply inflating the packer over it. By avoiding time consuming conventional tests, productivity could be increased by as much as 30%. Logiball 2001J Packers approximate void volumes. ICGA promotes the proper use of chemical grouting as a safe, economical and effective mean to reduce ground water.
According to IEC60695-2-2, IEC60695-11-5 and GB/T-5169.5, ZY-3/ZY-3S needle flame test equipment is applied in the production and quality control department of lighting products, hyperpiesia electrical apparatus, domestic appliance, machine electric appliance, electrical machine, power tool, electronic instrument, electrician instrument and technical equipment. Also, the apparatus is suitable for the industry of insulation material, engineering plastics and solid combustible material. Specifications: Angle of burner: 45 (when in test) / (when adjust the flame's height) Needle flame burning time: 0~999.9s±0.1s (adjustable, 30s in general) â?¢ After-flame time: 0~999.9s�±0.1s, auto record and pause manually â?¢ Height of flame: 12mm�±1mm (gauge is included) â?¢ Gas: 95% butane â?¢ Test range of temperature: 0~1000â?? â?¢ The temperature rises from 100â??�±2â?? to 700â??�±3â?? within 23.5 seconds�±1s â?¢ Thermocouple: �¦0.5mm K type â?¢ Applied with touch screen and remote control To save the delivery cost for the oversea market, LISUN designed a compact version needle flame test equipment weighing less than 50kg. (Customer need to prepare additional ventilation system for ZY-3S)
The ZRS-3H Glow-wire Test Apparatus is according to IEC60695-2-1, IEC60695-2-10, IEC60695-2-11, IEC60695-2-12, IEC60695-2-13 (GB/T5169.10, GBT5169.11, GBT5169.12, GB/T5169.13) < Basic testing methods of Glow wire, basic testing methods of Glow wire device>, UL 746A, IEC829, DIN695 and VDE0471. What is glow wire test? The Glow wire tester ZRS-3H/ZRS-3HS is suitable for resistance to abnormal heat and fire test on lighting lamps, electronic products and household appliances. It uses high-temperature coating spraying on steel structure and imported instrument display, with easy operation and stable performance. The glow wire testing equipment is applicable to flame resistance test of all levels of QC departments and corresponding enterprises. Specifications: Heating temperature: adjustable continuously within the range of 25~1100C, the accuracy of temperature is 1C, the resolution of temperature is ±3C Glow-wire time: 0.1-999.9s±0.1s(time range is adjustable) Ignition time: 0.1-999.9s, auto record, manual pause Flame-out time: 0.1-999.9s (auto record and manual pause) Glow wire pressure on test specimen: 1±0.2N. Limiting pressure depth is 7mm Glow wire: 4 nickel (80) and chromium (20) Made in specific dimensions. Thermocouple: �?0.5 armored nickel & chromium/nickel-chromium wire, K Type. Automatic departure: While reaching specified glowing time, test specimen will depart from glow wire automatically. To save the delivery cost for the oversea market, LISUN designed a compact version glow-wire tester weighing less than 50kg. (Customer need to prepare additional ventilation system for ZRS-3HS)
The SG61000-5 is an automatic surge generator (also called lightning surge immunity test, combination wave generator, surge current generator/surge voltage generator, combined surge voltage and current generator) . How does a surge generator work? The SG61000-5 surge generator provides a common basis for evaluating the resistance of power cords and internal connectors of different equipment to high energy transient interference caused by natural lightning surge induction and large capacity load switching. It fully meets the IEC 61000-4-5, EN61000-4-5 and GB/T17626.5 standards.
LSRF-3 Lamp start, Run-up time and Light Flickering Analyzer â?? Flicker Tester is equipped with Class A photo detector, so the sampling speed is up to 100kHz. It fully meets the requirement of BASIC, Energy Star V2.1, IEC TR 61547-1:2020 IEC-Pst, CA CEC, ASSIST, CIE TN006-2016 CIE SVM, IEEE Std 1789 standards, etc. It is professional for flicker test of LED lights and lamps, energy-saving lamps, etc. According to EU directives 1194/2012, 2009/125 / EC, SASO2902, COMMISSION DELEGATED REGULATION (EU) 2019/2015, COMMISSION REGULATION (EU) 2019/2020 and IEC60969 â??Self-ballasted Lamps for General Lighting Servicesâ??Performance Requirementsâ?? and other requirements. The LSRF-3 can connects with PC via USB cable. The English version software can be run in Win7, Win8 and Win10, Win11 (The driver was Certificated by Microsoft)
LPCE-2 Integrating Sphere Spectroradiometer LED Testing System is for single LEDs and LED lighting products light measurement. LEDâ??s quality should be tested by checking its photometric, colorimetric and electrical parameters. According to CIE 177, CIE84, CIE-13.3, IES LM-79-19, Optical-Engineering-49-3-033602, COMMISSION DELEGATED REGULATION (EU) 2019/2015, IESNA LM-63-2, IES-LM-80 and ANSI-C78.377, it recommends to using an array spectroradiometer with an integrating sphere to test SSL products. The LPCE-2 system is applied with LMS-9000C High Precision CCD Spectroradiometer or LMS-9500C Scientific Grade CCD Spectroradiometer, and a-molding integrating sphere with holder base. This sphere is more round and the test result is more accruate than the traditional integrating sphere. Measures: â?¢ Colorimetric: Chromaticity coordinates, CCT, Color Ratio, Peak Wavelength, Half Bandwidth, Dominant Wavelength, Color Purity, CRI, CQS, TM-30 (Rf, Rg), Spectrum Test â?¢ Photometric: Luminous Flux, Luminous Efficiency, Radiant Power, WPE, EQE, EEI, Energy Efficiency Class, Pupil Flux, Pupil Flux Efficiency, Pupil Factor, Cirtopic Flux, Plant Growth Lamp PAR and PPF â?¢ Electrical: Voltage, Current, Power, Power Factor, Displacement Factor, Harmonic(Optional) â?¢ LED Light Aging Test according to LM-80: Flux VS time, CCT VS time, CRI VS time, Power VS time, Power Factor VS time, Current VS time and Flux Efficiency VS time. Option: The LPCE-2(LMS-9000C) or LPCE-2(LMS-9500C) work with a IS-1.5MT Constant Temperature Integrating Sphere and TMP-8 Multiplex Temperature Tester can fully meet IES LM-82 High Precision LPCE-2(LMS-9000C) System Configuration (It is suitable for the Middle & Small Manufacturer or General Test Lab): High Precision CCD Spectroradiometer (LMS-9000C), Optical Fiber (CFO-1.5M), Digital Power Meter (LS2050B/LS2050C/LS2012), DC Power Source (DC Series), AC Power Source (LSP-500VARC or LSP-500VARC-Pst), Integrating Sphere (IS-1.5MA and IS-0.3M), Standard Light Source (SLS-50W and SLS-10W), 19 Inch Cabinet (CASE-19IN). You can download the detailed PDF here: LPCE-2 (LMS-9000C) High Precision CCD Spectroradiometer Integrating Sphere System Brochure±0.3nm, Wavelength Reproducibility: ±0.1nm Sample Scanning Steps: ±0.1nm Accuracy of Chromaticity Coordinate (x, y): ±0.002 (under Standard A Lamp) Correlated Color Temperature CCT: 1,500K~100,000K, CCT Accuracy: ±0.3% Color Rendering Index Range: 0~100.0, Accuracy: ±(0.3%rd±0.3) Luminous Flux Range: 0.01-200,000lm; Photometric linear Accuracy: ±0.5% Stray light:
LPCE-3 is a CCD Spectroradiometer Integrating Sphere Compact System for LED Testing. It is suitable for single LED and LED luminaires photometric, colorimetric and electrical measurement. The measured data meets the requirements of CIE 177, CIE84, CIE-13.3, COMMISSION DELEGATED REGULATION (EU) 2019/2015, IES LM-79-19, Optical-Engineering-49-3-033602, IESNA LM-63-2, ANSI-C78.377 and GB standards The Sphere System Configuration: CCD Spectroradiometer (LMS-7000), Optical Fiber (CFO-1.5M), Digital Power Meter (LS2008R), DC Power Source (DC-S Series), AC Power Source (LSP-500VAS), Integrating Sphere (IS-1.5MA-CASE and IS-0.3M), Standard Light Source (SLS-50W and SLS-10W) Measurement: Colorimetric: Chromaticity coordinates, CCT, Color Ratio, Peak Wavelength, Half Bandwidth, Dominant Wavelength, Color Purity, CRI (Ra, R1 to R15), Spectrum Test, TM30 (Rf, Rg), CQS Photometric: Luminous Flux, Luminous Efficiency, Radiant Power, EEI, PAR, PPF Electrical: Voltage, Current, Power, Power Factor, Harmonic (Optional) Specification: Spectral Range Wavelength: 350nm~950nm(LMS-7000VIS) (200~1050nm is optional) Spectral Wavelength Accuracy: ±0.5nm Wavelength Reproducibility: ±0.5nm Sample Scanning Steps: �±0.1nm Accuracy of Chromaticity Coordinate (IOx, y):±0.003 (under Standard A Lamp) â?¢ Correlated Color Temperature CCT: 1,500K~25,000K. CCT Accuracy: ±0.5% Color Rendering Index Range: 0~100.0, Accuracy: ± (0.3%rd±0.3) Photometric linear: �±0.5% Stray light:
The Portable CCD LED Colorimeter Spectroradiometer has the following versions which can measure different parameters
What is the definition of type C goniophotometer? LSG-6000 Moving Detector Goniophotometer (Mirror Type C) was manufactured by LISUN completely meets LM-79-19, IES LM-80-08, COMMISSION DELEGATED REGULATION (EU) 2019/2015, CIE-121, CIE S025, SASO 2902, IS16106 and EN13032-1 clause 6.1.1.3 type 4 requirements. LSG-6000 is the latest upgraded product of LSG-5000 and LSG-3000 in compliance with the requirements of the LM-79-19 standard Clause 7.3.1, its an automatic light distribution intensity 3D curve testing system for measuring light. The darkroom can be designed according to the customerâ??s existing room size. What is the use of goniophotometer? LSG-6000 gonio photometer manufacturer is LISUN, it can measure all types of lighting sources, LED, Plant Lighting or HID luminaires such as indoor and outdoor luminaires, roadway luminaires, street lamps, flood lights and other kinds of luminaires.
Polyurethane waterproof coating, js polymer cement based waterproof coating, k11 waterproof slurry, anti mold and impermeable waterproof mortar, metal roof waterproof thermal insulation coating, leak plugging king, ement based permeable crystalline waterproof coating, sbs liquid rubber waterproof coating, special waterproof coating red rubber exposed roof, ceramic tile back coating adhesive.
Electrical wires,bulb,leds,motor armature, silver wires, copper wires, conduit pipes, meter box, switches, plugs, switch boards, extension switch boards, decoration lights for interior, industrial wires, exhaust fans, ceiling fans, table fans, fan motor parts, mixer grinder parts, all parts of mixer grinder motors etc..
Lighting and electrical test instruments, goniophotometer, spectroradiometer, integrating sphere, led test instruments, cfl test instruments, photometer and colorimeter, emc & emi testing, surge generator, electrical safety testing, environmental test chamber, ip waterproof test equipment, dustproof test chamber, high and low temperature humidity chamber, plug and switch testing, ac and dc power supply..
Products are goniophotometer, integrating sphere, spectroradiometer, surge generator, esd simulator, emi receiver, emc test equipment, electrical safety tester, environmental chamber, temperature chamber, climate chamber, thermal chamber, salt spray test, dust test chamber, ip waterproof test, rohs test (edxrf), glow wire test and needle flame test, plug and switch testing, ac and dc power supply.
Personal protective equipment ( safety helmet, mask, safety shoes, safety gumboot, ear plug, ear muff, safety gloves, safety glass, coverall etc.) supplier in nepal, rescue ( life jacket, life buoy ring, throw bag, rescue rope, life boat, stretcher, first aid kit, fire ( fire extinguisher, fire hydrant, fire suppression system, fire alarm system, smoke detector system.
Epdm rubber sponge (open cell / closed cell), stainless steel wire rope, automobile repair tools, heat exchangers, pressure vessels, valve / flange, pre insulated tube, heat transfer tube, gasket, metal solidification agent.
Sheet metal press components 1) precision stamp press components manufacturing 2) press tooling mould manufacturing 3) stamp press mould tooling manufacturing 4) press automobile components &c commercial parts manufacturing.
Ocean Supply is your top-tier marine equipment and hardware store. Explore our wide range of products to meet all your marine needs. Shop now today with us. check our website
Discover the LALIZAS Fire Hose with Couplings, a durable and high-pressure solution for marine and industrial firefighting needs.
Introducing Urvilla, the perfect blend of functionality and elegance to safeguard your table from water stains and spills. Crafted with precision from vegan leather and woven pandan, Urvilla offers a sustainable and stylish solution for protecting your surfaces. Here's why Urvilla is an essential addition to your table setting: Materials: Vegan Leather: Enjoy the luxurious look and feel of leather without compromising on your values. Our vegan leather ensures ethical elegance and durability. Woven Pandan: Infused with natural charm, the woven pandan detail adds texture and uniqueness to each coaster. Variant: Choose from classic Black, rich Brown, or sophisticated Navy to complement your table decor effortlessly. Dimensions: Compact and Practical: With a diameter of 8 cm, Urvilla provides ample coverage for your cups and glasses while remaining sleek and unobtrusive on your table. Price: Starting from just $7K per piece*, Urvilla offers affordable luxury that adds a decorative touch to your table while protecting it from water stains and spills. Elevate your table setting with Urvilla the stylish coasters that combine practicality with eco-friendly sophistication. *Prices may vary.
Introducing Saskara, the epitome of style and practicality in dining accessories. Crafted with care from a blend of vegan leather and woven pandan, Saskara cutlery sleeves offer a sustainable and chic solution for organizing your cutlery. Here's why Saskara is the perfect addition to your dining table: Materials: Vegan Leather: Luxurious yet ethical, our vegan leather ensures guilt-free elegance and durability. Woven Pandan: Infused with natural charm, the woven pandan detail adds texture and uniqueness to the sleeves. Variants: Choose from classic Black, rich Brown, or sophisticated Navy to complement your dining decor effortlessly. Dimensions: Spacious and Practical: With dimensions of 22 x 8 cm, Saskara provides ample space to neatly store your cutlery while remaining compact and portable. Price: Starting from just $10 per piece*, Saskara offers affordable luxury that elevates your dining experience with style and sustainability. Upgrade your dining table with Saskara â?? the stylish cutlery sleeves designed to keep your cutlery organized and your dining experience effortlessly elegant. *Prices may vary.