Titanium Dioxide (TiO2) Anatase is a water dispersible dry pigment recommended for use in the manufacture of rubber, plastics, paints and coatings, and paper. It has excellent brightness and high tint strength. Anatase (B101) is an excellent choice for filling of paper.
LSR silicone adhesive WSD-0429-5-2AB is for liquid silicone / LSR silicone over molding with plastic,metal substrates, like PP, PPSU, PC,PA, PA66, stainless steel, zinc,copper.... in injection molding process
Silicone soft touch smooth feeling oil is also called silicone matting oil, silicone matte oil, etc. It is mainly used for coating silicone-based products. Because of silicone products molded out of the surface are rugged and wrinkled, feeling bad while touch it, generally by spraying soft touch smooth feeling oil to improve the silicone surface effect, make it have have a delicate and smooth feelings, and increase products additional value and selling point. Features: Soft touch smooth feeling, anti-sticking, Reduced friction,dust proof functions.
Mesh version of the ink (screen printing ink), also known as screen version of the ink (silk screen printing ink), refers to a variety of mesh version of the printing ink for siicone screen printing ink. Features : Fast curing, good adhesion, high gloss, beautiful printing fonts, bright colors, strong three-dimensional sense, high coverage, chemical resistance, abrasion resistance. Application Silicone rubber keypad, silicone wallets, silicone swimming cap, silicone wristband.
PTC-200A/B is a platinum catalytic vulcanizing agent for molding and hot air vulcanization of compounded silicone rubber, and the vulcanized products are odorless, non-toxic, and anti-yellowing. When used for molded products, it can achieve fast vulcanization at about 110-130â?? (measured mold temperature), and at the same time, it has a relatively long waiting time at room temperature after refining. platinum vulcanizing agent is really an effective alternative to the double two five vulcanizing agent, and more efficient, more environmentally friendly, saving the overall cost! Application products: silicone baby care products
C-20 anti-yellowing vulcanizing agent, is a mixture of peroxide and raw rubber carrier, also used in silicone products molding vulcanization process, used in high-quality products for long-term use, used for transparent, semi-transparent and white, semi-transparent color and other products to prevent yellowing phenomenon, in the transparent or white parts, to ensure that high temperature vulcanization for many times (or the second vulcanization of 200 â?? for about 4 hours of baking), the product does not turn yellow, applicable to the color of pieces of anti-yellowing, to ensure that the color of colored parts do not turn yellow after many times of vulcanization, as well as long-term use of the color does not change color!
C-14 odorless vulcanizing agent, with excellent dispersion, fast vulcanization speed and odorless vulcanized silicone products, is suitable for crosslinking of vinyl silicone rubber, polyethylene and ethylene propylene rubber. It is importantly used in food grade silicone products, kitchen products and baby products. Composition: Aã?? Silicone polymer Bã??Active peroxide C. Anti-yellowing agent Application products: silicone Kitchenwares, silicone household products
Liquid silicone colorant, is a new type of silicone colorant developed for liquid silicone, good compatibility with liquid silicone, good dispersion, strong coloring power, high temperature resistance, no migration, easy and convenient to add, in line with ROHS, REACH and other environmental requirements. Silicone color paste is widely used in liquid silicone injection extrusion and other processes of coloring. Features: It has the excellent qualities of heat resistance, light resistance, migration resistance, color separation resistance, easy out, acid and alkali resistance, strong coloring power, and high solid content.
HTV silicone color pigment is is a silicone masterbatch made of special silica gel, various color powders and many kinds of additives, used for coloring of various silicone products, suitable for molding process. Features: Easy to operate, temperature resistance, good dispersion, strong coloring strength.
Introduction The ARLTS series filter cartridge is made of hydrophobic PTFE micropore membrane as the filtering medium. It is manufactured by thermally fusing PTFE filter membrane and PP support material, without any adhesives. Its main features include strong hydrophobic, high retention rate, excellent chemical resistance and thermal stability. It maintains effective filtration effect for corrosive solvents and strong oxidizing liquids. The double-layer membranes formula can better improve the filtration efficiency. Its biological safety and endotoxin indexes meet FDA requirements and Chinese Pharmacopoeia standards. All products have passed integrity tests of the instrument. Specification Filter material: Hydrophobic PTFE micropore filter membrane (single/double layer) Diameter: 69, 83 mm Pore size: 0.1 ~ 3 micron Length: 5" ~ 60" Interface type: 222, 226, 215, 213, DOE Gasket/O-rings: Silicone, EPDM, NBR, Viton, wrapped in PTFE Application Chemical industry: Terminal filtration for organic solvents, inorganic solvents, chemical reagents, etc. Food Industry: Terminal filtration for clarification of liquor, beverages, wines, fruit wines, removal of microorganisms and fine particles, etc. Gas Industry: Gas filtration, sterile storage tank respirator, air fermentation tanks, etc.
Introduction The ARLTQ series filter cartridge is made of hydrophilic PTFE micropore membrane as the filtering medium. It is manufactured by thermally fusing PTFE filter membrane and PP support material, without any adhesives. It is suitable for the chemical and pharmaceutical industry with strict requirements. Its main features include stable hydrophilic, high retention rate, excellent chemical resistance and thermal stability. It does not require pre-wetting when filtering solvents with high water content. The double-layer membranes formula can better improve the filtration efficiency. Its biological safety and endotoxin indexes meet FDA requirements and Chinese Pharmacopoeia standards. All products have passed integrity tests of the instrument. Specification Filter material: Hydrophilic PTFE micropore filter membrane (single/double layer) Diameter: 69, 83 mm Pore size: 0.1 ~ 3 micron Length: 5" ~ 60" Interface type: 222, 226, 215, 213, DOE Gasket/O-rings: Silicone, EPDM, NBR, Viton, wrapped in PTFE Application Pharmaceutical Industry: Sterile active pharmaceutical ingredients, sterilization filtration of pharmaceutical liquids, etc. Chemical Industry: Filtration of hydrophilic organic solvents, inorganic solvents, chemical reagents, etc. Food Industry: Filtration of alcohol, beverage, etc.
Introduction The ARLE series micropore filter cartridge is made of PES micropore membrane as the filtration medium. The uniquely shaped and evenly distributed micropores cover more than 85% of the membrane area, ensuring high filtration efficiency and stability. This product exhibits excellent hydrophilic, is free from surfactants, and features efficient antibacterial properties, low adsorption, high mechanical strength, as well as resistance to high temperatures and pressures. It can withstand multiple cycles of steam sterilization. The double-layer filter membrane formula can better improve the filtration effect. All products have passed the integrity test of the instrument. Specification Filter material: PES micropore filter membrane (single / double Layer) Diameter: 69, 83 mm Pore size: 0.1 ~ 1 micron Length: 5" ~ 60" Interface type: 222, 226, 215, 213, DOE Gasket/O-rings: Silicone, EPDM, NBR, Viton, wrapped in PTFE Application Suitable for terminal filtration in pharmaceutical, biological products, microelectronics, semiconductor, chemical and other industries.
Introduction The ARSP series micropore membrane filter cartridge is made of PP microfiber as the filtration medium. The product is formed by folding the combination of multi-layer filter membranes, achieving a stable deep filtration effect. In order to meet the market demand for high-flow filtration, the product increases the effective filtration area of the membrane. It has the characteristics of high flow rate, long service life, stable structure and wide chemical compatibility, which are conducive to enhancing the filtration efficiency of liquids. It is mainly used for liquid filtration in large-scale LCD and touch panel processes, such as substrate cleaning, stripping, etching, developer and deionized water rinsing, etc. It also meets the demand for large flow rates in the chemical and food industries. Specification Filter material: PP micropore filter membrane Diameter: 131 mm Pore size: 0.1 ~ 60 micron Length: 10" ~ 60 " Interface type: 334 Gasket/O-rings: Silicone, EPDM, NBR, Viton, wrapped in PTFE Application Electronics industry: Wet processing of LCD and touch panels, semiconductor process, wet equipment chemical reagent Chemical industry: Chemical solvents Food industry: Beverage, alcohol
Introduction The filtration medium of ARWP series micropore membrane filter cartridge is made of PP superfine fiber membrane. It is formed by folding the combination of multi-layer filter membranes and thermally welding into 6-inch large diameter structure, providing large filtration area for stable deep filtration effect. This product is available in both external and internal pressure types, featuring high efficiency retention and high liquid flux, widely used in security filtration and pre-filtration across various industries. Specification Filter material: PP micropore filter membrane Diameter: 6" (152mm) Pore size: 1 ~ 80 micron Length: 20", 40", 60" Interface type: Multiple interface selections Gasket/O-rings: Silicone, EPDM Application General industry: Filtration of workshop water for various production processes, etc. Electronics industry: Pre-filtration for reverse osmosis systems, pre-filtration for deionized water, etc. Power plants: Filtration of makeup water, condensate water, cooling water, wastewater treatment, etc.
Introduction The ARBP series micropore membrane filter cartridge is made of polypropylene microfiber as the filtration medium. The product is formed by folding the combination of multi-layer filter membranes, achieving a stable deep filtration effect. Its large diameter design increases the filtration area, effectively reducing the quantity of filter cartridges used and the frequency of replacements, thereby lowering production costs. Due to its high flow rate and large dirt-holding capacity, this product is widely used in the filtration of liquid chemicals in the manufacturing process of LCD and touch panel, such as substrate cleaning, stripping, etching and deionized water rinsing. Specification Filter material: PP micropore filter membrane Diameter: 83 mm Pore size: 0.1 ~ 60 micron Length: 10" ~ 60 " Interface type: 226 Gasket/O-rings: Silicone, EPDM, NBR, Viton, wrapped in PTFE Application Electronics industry: Wet processing of LCD and touch panels, semiconductor process, wet equipment chemical reagent Chemical industry: Chemical solvents
Miniature Piston Valve 1122 1122 Series plunger valve with large orifice is developed by Keyto independently, its mainly function is switch on/off liquid path. This valve has many multiple options type, can tolerate high pressure, the life cycle can reach more than 1.2 million cycles. Its a high precision, low cost and maintenance-free plunger solenoid valve. The solenoid valve is mainly used in the inkjet printing industry. Feature of Miniature High Pressure Solenoid Valve 1122 Keyto Plunger Valve 1122 series has high pressure resistance feature. It is better than other Keyto valves series, and its easy to use. It also has multiple options for wetted materials: â? Valve body: POM. â?¡Seal material: EPDM. Specifications of Miniature Piston Valve 1122 Structure Direct acting poppet type Valve type 2/3-way N.C. Port No. 3 Orifice diameter 1.5mm CV 0.035 Mediums Water, Air, Weak acid and base, MEK and so on. Operating temperature 0~60(No freezing) Pressure(in out) 0~0.4MPa Leakage 0 Response time
Hardwood Lump Charcoal Like Rubber Wood Charcoal Rubber Wood Charcoal is a kind of hardwood lump charcoal that suitable for industrial use. Origin : Jakarta, Indonesia. Quality of Product : Ash (0.6%), Volatile Mater (8.6%), Fix Carbon (87.2%), Moisture (3.4%), Calorific (7767 cal/g). Shipping terms : CFR or CIF. Payment Method : TT Minimum Order Qty : 1 forty-foot Container.
Welcome to JSC engineering company, manufacturer, Supplier and exporter of Plastic and Rubber Machinery parts. Like Screw, Barrel, Twin screw barrel, Extrusion screw barrel, Rubber Extrusion and molding screw barrel, Ring plungers set, Nozzle, Shut off nozzle, Filtration Nozzle, Bimettalic screw and barrel Tie Bar and many more components.
Zinc Stearate is used in plastic, rubber construction chemicals, and the paint industry. It is a powerful mold release and hydrophobic. It is an external lubricator. It is suitable for all types of rubber and plastic applications. Zinc Stearate is used as sandblasting and flattener in varnish, coating, and ink applications. Also, it is used as water-repellent in beton, rock wool, paper, textile, construction chemicals and paint industry. It is used as mold release and dusting. It can be manufactured with demanded particular size and density, according to production process and industry.
Fiberglass platform ladder designed for prolong standing at one height. Nonconductive fiberglass rail with fully serrated aluminium step & platform. Slip Resistant Platform : Large Fully serrated platform 15" wide 20" deep, it locks ladder. Heavy Gusset Bracing : Two pairs of gusset support at the bottom step. All gussets are heavy duty steel. Slip Resistant Rubber Feet : Aluminum feet with thick rubber tread. Top Rail Guard : To serve as a railing for working from platform.