Features 1, the instrument adopts the automatic tube furnace test method, program control tube furnace heating and moving 2, the instrument adopts the super thermal insulation material, is the tube furnace can work under high temperature 3, the instrument adopts the intelligent control system, with temperature setting, time setting and alarm function detection 4, the instrument uses a timing device, the alarm prompt
Scope UV fluorescence sulfur analyzer is based on UV fluorescence measurement principle and the development of computer technology combined with a new generation of precision instruments, is currently the most advanced of the total sulfur content tester, in line with ASTM D5453, SH / T 0689 and other standards, the instrument is National total sulfur content of refined oil arbitration standards. Now widely used in the determination of total sulfur content of crude oil, hydrocarbons and fuel, petroleum, plastics, petrochemicals, food and so on. Measurement principle instrument uses ultraviolet fluorescence method, when the sample is introduced into the pyrolysis furnace, cracking occurred sample oxidation of sulfide which quantitatively converted to sulfur dioxide, carried by a carrier gas, off which the water through a membrane dryer, into the reaction chamber, sulfur dioxide absorbing ultraviolet light energy into an excited state of sulfur dioxide (SO2 *), the fluorescence emission of sulfur dioxide when SO2 * to return to a stable state, the energy released by a photomultiplier tube to receive, and then the micro-current amplifier, computer data processing, the amount of reaction with sulfur dioxide emission intensity is proportional to the amount of sulfur dioxide and total sulfur content in the sample is proportional, so the content of the sample can be determined by measuring total sulfur emission intensity. Features 1, computer-controlled operation, enabling interactive, data, peak shape can be automatically stored print. 2, the operating software can be connected with LIMIS system, automatic data transmission. 3, the instrument uses the new quartz pyrolysis tube, the injection volume can be increased to reduce measurement errors, increase the sensitivity of the instrument, higher repeatability. 4, cooling fans, automatic switch, eliminating the need to wait for the shutdown to finish samples trouble, saving time and effort. 5, darkroom system uses the latest technology, the key components imported detecting element to improve the detection accuracy and sensitivity of the instrument. 6, equipment imported membrane dryer to absorb , eliminating the need to frequently replace magnesium perchlorate of trouble, while reducing the leakage problem. 7, using computer control of temperature, improve the instrument precision temperature control, and difficult to over-temperature. 8, using air instead of water cooling, saving water resources. 9, can be adjusted to take existing calibration curve calibrated using a standard sample after sample analysis. Technical Parameters 1, in line with standards: ASTM D5453, SH / T 0689 and other standards 2, measuring range: 0.2mg / L ~ 10000mg / L ~ percentage 3. Air source: Argon: 99.999% Oxygen: 99.999% 4, sample status: solid, liquid, gas (with corresponding injector) 5, temperature range: room temperature ~ 1100 ? ± 3 ? 6, repeatability error: 0.2mg / L=X
ULTRA LOW SULFUR Quantity: Minimum 10,000 MT Trial Shipment Maximun 500,000 MT Monthly
Product : Sulfuric acid 98%. H SO Detail: 1.Molecular form. : H SO 2.Appearance: transparent colorless odorless liquid 3.CAS Registration number: 7664-93-91. 4.Type: Hazardous chemicals 5.Packing : 25.6 tons/20GP container,1600kgs IBC barrel package
1. Sulfur technical granulated 99.98% with quality certificates, in big runs. 2. Delivery in the amount of 3,000 tons in month. 3. Origin: Kazakhstan
Sulfur hexafluoride (SF6) or sulphur hexafluoride is a synthetic fluorinated compound with an extremely stable molecular structure. UN 1080 CAS 2551-62-4 MF F6S Melting point� â??50� �°C(lit.) Boiling point� â??64� �°C1� mm Hg(lit.) density� 6.602 NANJING ZL ENERGY CO.,LTD. specialize in Isobutane R600a, Propylene, Ethane, Cyclopentane, 1-hexene and Isooctane, etc. We look forward to your inquiry if any needs.
Insoluble sulfur HS OT20 / Insoluble sulfur OT20 / Insoluble sulfur HD OT20 / Insoluble sulfur IS7020 Specification: Appearance: Non-dusting yellow powder. Total Sulfur Content %: 79.0-81.0 Insoluble Sulfur (On total Sulfur) % min.: 90 Thermal stability (105 deg. x15min) % min: 80 Thermal stability (120deg. x15min) % min: 40 Oil Content%: 19.0-21.0 Acidity (H2SO4) % max.: 0.05 Heating Loss (60deg.x4h) % max.: 0.50 Ash Content % max.: 0.15 Sieve Residue (150m) % max.: 0.30
Insoluble sulfur OT33 / Insoluble sulfur IS6033 Specification: Appearance: Non-dusting yellow powder. Total Sulfur Content %: 66.0-68.0 Insoluble Sulfur (On total Sulfur) % min.: 90 Thermal stability (105 deg. x15min) % min: 80 Thermal stability (120deg. x15min) % min: 40 Oil Content%: 32.0-34.0 Acidity (H2SO4) % max.: 0.05 Heating Loss (60deg.x4h) % max.: 0.50 Ash Content % max.: 0.15 Sieve Residue (150�¼m) % max.: 0.30
Sulfur Granule/Powder etc.
Insoluble sulfur IS7020 Specification: Appearance: Non-dusting yellow powder. Total Sulfur Content %: 79.0-81.0 Insoluble Sulfur (On total Sulfur) % min.: 90 Thermal stability (105 deg. x15min) % min: 80 Thermal stability (120deg. x15min) % min: 40 Oil Content%: 19.0-21.0 Acidity (H2SO4) % max.: 0.05 Heating Loss (60deg.x4h) % max.: 0.50 Ash Content % max.: 0.15 Sieve Residue (150m) % max.: 0.30
Insoluble sulfur OT20 / Insoluble sulfur HD OT20 / Insoluble sulfur HS OT20 Specification: Appearance: Non-dusting yellow powder. Total Sulfur Content %: 79.0-81.0 Insoluble Sulfur (On total Sulfur) % min.: 90 Thermal stability (105 deg. x15min) % min: 80 Thermal stability (120deg. x15min) % min: 40 Oil Content%: 19.0-21.0 Acidity (H2SO4) % max.: 0.05 Heating Loss (60deg.x4h) % max.: 0.50 Ash Content % max.: 0.15 Sieve Residue (150m) % max.: 0.30
Insoluble sulfur OT20 / Insoluble sulfur HD OT20 / Insoluble sulfur HS OT20 Specification: Appearance: Non-dusting yellow powder. Total Sulfur Content %: 79.0-81.0 Insoluble Sulfur (On total Sulfur) % min.: 90 Thermal stability (105 deg. x15min) % min: 80 Thermal stability (120deg. x15min) % min: 40 Oil Content%: 19.0-21.0 Acidity (H2SO4) % max.: 0.05 Heating Loss (60deg.x4h) % max.: 0.50 Ash Content % max.: 0.15 Sieve Residue (150m) % max.: 0.30
Sulfur 99.98% +/- 0.008 Specifications 1- Shape: Granulated and Ground Sulfur 2. Purity min.99.98%. +/- 0.008 3. Origin: Uzbekistan. 4. Color: Yellow /Yellow Bright. 5. Price $50 for mt Mark Krupovlyanskiy MMK,Inc Email: mmk91335@Gmail.com Phone: +1(818)3786718 https://www.mmktrade.com/commodities
The Low shrinkage oil is a distillate fuel manufactured from a selected crude oil; this Diesel Fuel contains 10 parts per million of sulfur (
sulfuric acid 98% belongs to Class 8 dangerous goods UN1830 HS 2807000010 CAS: 7664-93-9 A 20' FCL contains 16 IBC barrels, one IBC barrel contains 1.6875 tons of sulfuric acid, and a 20' FCL contains 27 tons of sulfuric acid. The size of IBC barrels is 1200*1000*1160mm, and the weight of each IBC barrel is 57kg
Specifications GCV: 8200 - 8500 Kcal/ Kg Sulfur: 4.5 % Volatile matter: 9-12% Ash: 1% max Moisture: 7-9% HGI: 40 Quantity: 30 000MT not more not less Loading port: Texas / U. S. Loading time:7-10 b days after prepayment Price: prices are here below for each locations 60 USD CNF to Europe & Middle East 65 USD CNF for India Malaysia Indonesia 68 USD CNF for S. KOREA, China Payment: %10 pay against proforma invoice + %60 will pay against SGS+Shipping documents after loading +%30 balance will pay after delivery before discharging. Payment makes to: US company's bank account at New York branch,
1) Product: Sulfur Soap (BarType) 50g 2) Made in Malaysia 3) Price FOB Malaysia USD 1.5-5 (can custom into 50g, 100g) 4) MOQ: 5,000 pcs 5) Terms : T/T 50% Advance and Balance before factory forwarding 6) Period of shipment : 7~15 days based on 5,000 sets from deposit clearance 7) Spec : Active ingredient: Sulfur 2 % and other natural ingredients for skin care All of our products contain BioSulfur from European Country. . Vitamin E keeps you looking younger as it retards cellular aging due to oxidation. None of our products contain coal tar or steroids. None of our products have been tested on animals. Suitable for all the family & all skin types Sulphur Soap body wash, good for problem skin conditions such as Psoriasis, Acne and Rosacea. ORYN Sulfur Soap specialise in a specially formulated sulphur soap range that cares for your skin, especially those prone to Psoriasis, Eczema, Acne and other skin conditions
There are two types of sulfur additive for your choice, one is called pyrite which contain 45% sulfur, and the other is contain 30% sulfur, the pyrite generally supplied in the size 3-8mm or 5-40mm can also accept customed in the size 10-50mm, the 30% sulfur type is always in the 10-50mm, it is through purity smelted, so contain less impurities, but the content of sulfur is also less, welcome for contact Anyang Huatuo Metallurgy for more details. The gray cast iron contains 0.06%-0.1% sulfur will be beneficial to improve its cutting performance, improve the inoculation effect in the production process, improve the graphite shape, and improve the mechanics of the casting.In order to obtain high quality gray mouth castings, should keep the reasonable balance of sulfur in the molten iron, if the sulfur is not unevern, it is necessray to do sulfur increasing treatment in time.
Urea N 46 Pril 0,5 - 3 mm at least 96% Bulk density 722 kg/m³ - Ammonium nitrate N 33,5 prilled Prill 1 - 5 mm at least 95 % Bulk density 942 kg/m³ - KAN N (MgO) 27 (4,2) prilled Prill 1 - 5 mm at least 95 % Bulk density 1017 kg/m³ - KAN N (MgO) 27(4,8) granulated Granules 2 - 5 mm at least 95% Bulk density 1033 kg/m³ - Ammonium sulphate nitrate ASN 26N + 15 S Granules 2 - 5 mm at least 95% Bulk density 969 kg/m³ - Ammonium sulphate 20 N + 24 S Granules 2 - 5 mm at least 95% Bulk density 991 kg/m³
Number: lkbj003 Product name: sulfur-free spring star aniseed Purpose£ºraw diet regimen, chinese pharmaceutical raw materials, health care filling materials, other raw materials and health Physical indicators: moisture