NEOFLON PFA AP-Series NEOFLON PFA is a copolymer of tetrafluoroethylene and perfluoroalkyl vinylether. It is a perfluoro polymer consisting of only carbon atoms and fluorine atoms without any hydrogen atom. It has the same excellent performance as PTFE in a wide range from extremely low to high temperatures. In addition, it has excellent transparency, mechanical strength at high temperature. It can be molded in the same molding method as general thermoplastic resins. Grades and Features of AP-Series Grades MFR (g/10 min.) Features AP-201 20 - 30 Superior in melt flowability. Suitable for injection-molded articles that have complex shape, and for ultrafine thin-wire coating (AWG34 - 44). AP-202 65 - 80 Excellent melt flowability. Suitable for injection-molded articles that have complex shape, and for thin-wire coating (AWG44 - 52). AP-210 10 - 17 Good melt flowability. Suitable for injection molding. AP-230 1.5 - 2.5 Superior in stress crack resistance. Suitable for extrusion and transfer molding. AP-201SH 20 - 30 High purity grade. Superior in melt flowability. Suitable for complex shape articles. AP-211SH 10 - 17 High purity grade. Long-term flexibility and good stress crack resistance. Suitable for joints and parts for pumps. AP-215SH 10 - 17 High purity grade. Suitable for injection molding. Suitable for joints and parts for pumps. AP-231SH 1.5 - 2.5 High purity grade. Long-term flexibility and good stress crack resistance. Suitable for extrusion and transfer molding. AP-210AS 11 - 14 Anti-static grade. Suitable for injection molding. AP-230AS 1.5 - 3.0 Anti-static grade. Suitable for extrusion molding. AP-230ASL 1.0 - 2.5 Anti-static grade. Suitable for extrusion molding.
Product Name : Laminated glassï¼?Fresh and high quality float glassï¼?Tempered glassï¼?Low-e coated glass,Low-energy-saving composite glass,Acid glass Product Description : Laminated glass is a composite glass product formed by sandwiching one or multiply layers of organic polymer medium films between two or many pieces of glass and carrying out special high-temperature pre-compression (or vacuumizing) and high-temperature high-pressure fabrication processing to adhere the glass to the medium films permanently. In addition, there are also some relatively special products such as colored medium film laminated glass, SGX series printing medium film laminated glass, XIR series Low-e medium film laminated glass and so on, as well as embedded decorative part (metal nets, metal plates, etc.) laminated glass, embedded PET laminated glass and other kinds of decorative and functional laminated glass. Price of product ( USD price or FOB price) : Negotiate Product origin : Zibo,Shandong,China Key Specifications/Special Features : Features: safety, hurricane and earthquake resistance, bulletproof and explosion-proof performance, UV resistance, noise resistance. Varieties: transparent float laminated , ultra-clear laminated, tempered laminated, coated laminated, colored laminated, etc. Specifications: the maximum size: 2,440*3,660mm. thickness: 4-50mm Minimum Order Size and Packgaing details : usually fixed with wooden frame,shipped by 20' container
Product Name : Laminated glassï¼?Fresh and high quality float glassï¼?Tempered glassï¼?Low-e coated glass,Low-energy-saving composite glass,Acid glass Product Description : Laminated glass is a composite glass product formed by sandwiching one or multiply layers of organic polymer medium films between two or many pieces of glass and carrying out special high-temperature pre-compression (or vacuumizing) and high-temperature high-pressure fabrication processing to adhere the glass to the medium films permanently. In addition, there are also some relatively special products such as colored medium film laminated glass, SGX series printing medium film laminated glass, XIR series Low-e medium film laminated glass and so on, as well as embedded decorative part (metal nets, metal plates, etc.) laminated glass, embedded PET laminated glass and other kinds of decorative and functional laminated glass. Price of product ( USD price or FOB price) : Negotiate Product origin : Zibo,Shandong,China Key Specifications/Special Features : Features: safety, hurricane and earthquake resistance, bulletproof and explosion-proof performance, UV resistance, noise resistance. Varieties: transparent float laminated , ultra-clear laminated, tempered laminated, coated laminated, colored laminated, etc. Specifications: the maximum size: 2,440*3,660mm. thickness: 4-50mm Minimum Order Size and Packgaing details : usually fixed with wooden frame,shipped by 20' container
Product Name : Laminated glass Fresh and high quality float glass Tempered glass Low-e coated glass,Low-energy-saving composite glass,Acid glass Product Description : Laminated glass is a composite glass product formed by sandwiching one or multiply layers of organic polymer medium films between two or many pieces of glass and carrying out special high-temperature pre-compression (or vacuumizing) and high-temperature high-pressure fabrication processing to adhere the glass to the medium films permanently. In addition, there are also some relatively special products such as colored medium film laminated glass, SGX series printing medium film laminated glass, XIR series Low-e medium film laminated glass and so on, as well as embedded decorative part (metal nets, metal plates, etc.) laminated glass, embedded PET laminated glass and other kinds of decorative and functional laminated glass. Price of product ( USD price or FOB price) : Negotiate Product origin : Zibo,Shandong,China Key Specifications/Special Features : Features: safety, hurricane and earthquake resistance, bulletproof and explosion-proof performance, UV resistance, noise resistance. Varieties: transparent float laminated , ultra-clear laminated, tempered laminated, coated laminated, colored laminated, etc. Specifications: the maximum size: 2,440*3,660mm. thickness: 4-50mm Minimum Order Size and Packgaing details : usually fixed with wooden frame,shipped by 20' container
Application Track Private cars/Vehicle rental /Fleet management/ Equipment outside etc Track container/cargo GPS+LBS+WIFI+BD+GLONASS Supports GPS & LBS + WIFE & GLONASS. Automatically switch according to the use environment and area. Content Product 4G version of strong magnetic vehicle positioning terminal Model GT208-4G strong magnetic / wireless charging Colour Black Way to install Strong magnetic free installation Application Vehicles/motorcycles/electric vehicles Configuration SIM SD NANO card Chip Spreadtrum SC9820E G-sensor Three axis acceleration sensor Start Time Cold start 45-120s Warm start 35s Hot start 1s Battery 3.7V 6000mAh polymer battery Standby 30 days Voltage DC:5V Electrostatic protection touch +/- 7KV Air +/- 10Kv Operating tem -20~55 Operating humidity 5%-95% Storage tem -40 85 Size 99mm * 61mm * 24mm Weight 175g 4G 4G TDD:B38/B39/B40/B41, FDD:B1/B3/B8 3G WCDMA:B1/B5/B8 2G 900/1800 MHz Frequency error 0.1ppm GPS Received signal 48dBhz above Received power -120dBm Location precision 10 m Location time Cold boot 35s-80s Hot boot 1s Tracking sensitivity -165dBm channel 66 passage
A binder or binding agent is any material or substance that holds or draws other materials together to form a cohesive whole mechanically, chemically, by adhesion or cohesion. In a more narrow sense, binders are liquid or dough-like substances that harden by a chemical or physical process and bind fibres, filler powder and other particles added into it. Examples include glue, adhesive and thickening. APPLICATION Pidicryl binder SUN is a new generation binder used for pigment printing on cotton, viscose, polyester blends and others. It is a Sun curable binder. Pidicryl Binder PDN Special is a self-cross-linking acrylic copolymer emulsion used for pigment printing in textile industry. Pidicryl Binder PDN is a self-cross-linking acrylic copolymer emulsion. It is specifically a kerosene based binder used for pigment printing in textile industry. Pidicryl Binder N060 is a new generation binder formulated to give high precision and accurate print designs with excellent colour value. It is the finest emulsion to give an elastic, flexible, and transparent film. Pidicryl Binder HS ECO is an extra soft binder used for pigment printing in textile industry. It gives brilliant and soft handle prints. Pidicryl Binder CIL 100 is a special printing binder used for printing infant wears, cotton, blended fabrics, polyester, and others. Pidicryl Binder BN is an acrylic emulsion with superior running properties. It is used for printing cotton, viscose material, cellulosic/polymer blends, and others. Pidicryl FL 9400 is a self-cross-linking and self-thickening acrylic emulsion. It is used for khadi printing on synthetic fabrics, khadi, pearl, flocking, and others. Pidicryl Binder MMG is a self-cross-linking acrylic copolymer emulsion. It is specially developed for printing gold or silver powders on textile fabrics. BINDER SLN - Properties: 28% - 30% Active Strength, Appearance: Bluish Tint Liquid, Application: Printing Of Pigment Emulsion. GOLD BINDER JARI BINDER Appearence : Milky White Liquid, Application : Silver Printing In Textile. FOAM BINDER - PAPER BINDER
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant. Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations. ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant. Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations. ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant. Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations. ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant. Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations. ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant. Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations. ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant. Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations. ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant. Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations. ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant. Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations. ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant. Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations. ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant. Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations. ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant. Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations. ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
Also known as: PAC, Aluminium Chlorohydrate, Aluminium Chlorohydroxide Molecular Formula: [Al2(OH)nCl6-n]m CAS No.: 1327-41-9 Introduction: Poly Aluminium Chloride (PAC) is a new type high efficiency inorganic polymer coagulant, adopting advanced manufacturing technique and quality raw material, show the features of low impurity, high molecula weight, and superior coagulating effect. Application: Poly Aluminium Chloride (PAC) is a kind of inorganic macromolecule flocculant. Through the hydroxyl ion bridging function and the polyvalent anion polymeric function, it produces large molecular and high electricity inorganic macromolecule. (1) Purification of river water, lake water and underground water. (2) Purification of industry water and industry recycling water. (3) Purification of waste water. (4) Reclaiming coal from coal-washing waste water and kaolin in ceramic industry (5) Purification of the waste water in printing and dyeing industry, leather industry, brewage industry, meat-processing industry, coal-washing, metallurgy industry, mine, pharmacy, paper-making, and purification of the waste water containing fluorine, oild and heavy metals. (6) Tannage and cloth cockling-prevent (7) Cement solidifying and moulding (8) Refining of pharmaceuticals, glycerine and sugar (9) Catalyzer carrier (10) Paper-making glue Packing: 25kg PP woven bags Transportation: This product should be protected from damp, rainfall and package damage in transportation. Storage: At dry warehouse with good ventilation.
Sintered Filter Element Feature 1. Sintered filter element is surface filtration 2. Sintered filter element is good for backwash because the pore passage of zwen sintered wire mesh aperture is very smooth 3. Sintered filter element has uniform pore size distribution 4. Wire mesh will not shed in filtration process 5. High compression strength 6. High mechanical strength 7. High rigidity 8. High abrasion resistance 9. Good durability against most liquids, gases and aggressive steam 10. High temperature resistance 11. High filter rating accuracy 12. High filter efficiency 13. Good corrosion resistance 14. Washable and Cleanable 15. Reusable 16. Long service life Sintered Filter Element Technical Parameter Raw Material: SS 316L, SS 304 Filter Media: ZWEN Sintered Wire Mesh Filter Rating: 0.5-300 Microns Filter Efficiency: > 99.99 % Operation Temperature: â?¤ 816 Outside Diameter: 10 mm, 15 mm, 25 mm, 30 mm, 50 mm, 60 mm, 63.5 mm, 65 mm,100 mm,150 mm, 250 mm, 380 mm, 500 mm or others Length: 40 mm, 90 mm, 127 mm, 254 mm, 508 mm, 762 mm, 1016 mm or others Gasket: PTFE, Viton, Silicone, Buna-n, EPDM Connector: 1. DOE 2. 220 3. 222 4. 226 5. Thread (NPT,BSP,G,M,R) 6. Flange 7. Special customization Application Polyester filtration, polymer filtration, high viscosity filtration, fuels and lubricants filtration, oil filtration, steam filtration, high temperature gas filtration, high temperature liquid filtration, steam filtration, potable and process water filtration, beverages filtration, detergent filtration, solvents filtration, pharmaceutical industry, chemical industry, chemical fiber industry, food industry
Cylindrical Metal Filter Element Feature 1. Cylindrical metal filter element is surface filtration 2. Cylindrical metal filter element is good for backwash because the pore passage of zwen sintered wire mesh aperture is very smooth 3. Cylindrical metal filter element has uniform pore size distribution 4. Wire mesh will not shed in filtration process 5. High compression strength 6. High mechanical strength 7. High rigidity 8. High abrasion resistance 9. Good durability against most liquids, gases and aggressive steam 10. High temperature resistance 11. High filter rating accuracy 12. High filter efficiency 13. Good corrosion resistance 14. Washable and Cleanable 15. Reusable 16. Long service life Cylindrical Metal Filter Element Technical Parameter Raw Material: SS 316L, SS 304 Filter Media: ZWEN Sintered Wire Mesh Filter Rating: 0.5-300 Microns Filter Efficiency: > 99.99 % Operation Temperature: â?¤ 816 Outside Diameter: 10 mm, 15 mm, 25 mm, 30 mm, 50 mm, 60 mm, 63.5 mm, 65 mm,100 mm,150 mm, 250 mm, 380 mm, 500 mm or others Length: 40 mm, 90 mm, 127 mm, 254 mm, 508 mm, 762 mm, 1016 mm or others Gasket: PTFE, Viton, Silicone, Buna-n, EPDM Connector: 1. DOE 2. 220 3. 222 4. 226 5. Thread (NPT,BSP,G,M,R) 6. Flange 7. Special customization Application Polyester filtration, polymer filtration, high viscosity filtration, fuels and lubricants filtration, oil filtration, steam filtration, high temperature gas filtration, high temperature liquid filtration, steam filtration, potable and process water filtration, beverages filtration, detergent filtration, solvents filtration, pharmaceutical industry, chemical industry, chemical fiber industry, food industry