Payment: t/t, l/c Delivery: 25 days after order confirmation Package: standard package or as you required. We provide customised products for you.
Features: Safer than normal lifting magnets by pretesting lifting safety. In some complicated situations it is difficult to estimate the actual lifting value with enough safety coefficient and consequently you are not sure if the lifting operation is safe or not, then you can take the following steps to get a safer lifting operation. 1. Place the lifting magnet at the load. 2. Turn the handle counterclockwise to the vertical position. 3. Insert the tip of the screw driver shipped with the lifting magnet into a small hole at the yellow cover to hold the handle in the position. 4. Lift the lifting magnet and the load 2¡±-3¡± from the floor. 5. If the load can be lifted, place the load back onto the floor. 6. Take off the screw driver and turn the handle to ON position. The handle is locked by the slide pin. 7. Lift the load again. This time the safety coefficient is 2 at least.
Payment: t/t, l/c Delivery: 20 days after the order confirmation Package: wooden case or as you required We offer customized products for your specific needs.
Payment: t/t, l/c Delivery: 25 days after the order confirmation Package: standard package or as you required. We provide customised products for you specific needs.
Lifting magnet, electro permanent lifting magnet, magnetic quick mold changing system, electro permanent magnetic chuck.Manufacturing
Payment: T/T, L/C Delivery: 25 days after the order confirmation Package: standard package or as you required. We offer customised products for your specific needs. For more information about our products. Please
NL-A lifting magnets, NL-B lifting magnets, plate metal lifter, electro lifting magnets, electro permanent lifting magnets.
Electro-permanent lifting magnets, permanent lifting magnets, lifting electromagnets, battery lifting magnets, electro-permanent magnetic chucks, magnetic separators.OEM
Lifting magnets, electro permanent lifting magnet, material handling, work holding device, magnetic lifters, magnetic chucks, magnet chucks, magnetic welding tools.
Ferrite Magnet is manufactured from oxide material by powder metallurgical process. Its advantages include: low-cost excellent corrosion resistance, resistance to be demagnetized etc. The normal working temperature of Ferrite Magnet is between-40C and +250C.It can be magnetized before or after assembling. Generally, Ferrite Magnet can be machined to regular shapes like segments, blocks, rings and discs etc. The normal grades for sintered Ferrite Magnets are Y10,TY25, Y30, Y30BH, Y35, etc. Advantages of Ferrite Magnet: Ferrites have isotropic characteristics, weak magnetic performance, has the same magnetic performance in any direction, multipolar magnetic charge. The main raw material of ferrite is oxides, so it is not corroded by high temperature, high humidity or chemicals (except strong acid and base); with excellent diamagnetic impedance, no flux loss before and after assembly and magnetic charging; working temperature is-40C to + 250C, poor temperature coefficient; Br temperature coefficient is-0.2% /C, 0.2% under Br, etc. per 1 Cincrease; high hardness, wire cutting and grinding; ferrite is brittle and fragile during production and transportation. magnetic requirements and good for strict working environment requirement.
Neodymium magnets (also known as NdFeB, Neo or NIB magnets), are strong permanent magnets made from an alloy of neodymium, iron & boron. Part of the Rare-Earth magnet family, they have the highest magnetic properties of all permanent magnets. Due to their high magnetic strength and relatively low-cost, they are the preferred choice for many consumers, commercial, industrial and technical applications.NdFeB is divided into sintered NdFeB and bonded NdFeB. Bonded NdFeB is magnetic in all directions and corrosion resistance and is divided into Bonded Compression NdFeB Magnet and Bonded Injection NdFeB Magnet; while sintered NdFeB is easy to corrosion, the surface requires coating, generally divided into axial and radial magnetic charging. Advantages of Sintered NdFeB Magnet : 1. Very hard and brittle, high diamagnetic resistance, high cost / performance ratio, not suitable for high working temper ature; 2. Magnetic performance is higher than that of the rare earth cobalt permanent magnet, the residual magnetic induction strength, magnetic induction coercivity, the maximum magnetic energy product is very high, is the current magnetic performance of the best permanent magnet; 3. High cost performance.
Samarium Cobalt (SmCo) magnets are made by a sintering process and exist in two forms. The first is Sm1Co5(SmCo 1:5),which has a maximum energy product of between 14 and 24MGOe. The second and more common form is Sm2Co17(SmCo 2:17) which has a maximum energy product of between 22 and 32 MGOe. The main Sm2Co17 alloy is around 35% Samarium (Sm)and 60% Cobalt (Co)with the balance being from varying amounts of lron (Fe) Copper (Cu). Hafnium (Hf) and Zirconium (Zr). Praseodymium (Pr) may also be used. Sm1Co5 is made of only Sm and Co and has excellent corrosion resistance. â?¢ Advantages of SmCo Magnet: 1.Superior resistance to high temperature. 2. Excellent resistance to corrosion, no coating is needed for surface protecting. 3.High working temperature. 4.SmCo is suitable for machines with high magnetic requirements and good for strict working environment requirement.
AINiCo is composed primarily of Aluminum Nickel Cobalt and also Copper and Titanium. They are manufactured through either casting or sintering process. Cast AINiCo may be manufactured in complex shapes such as horseshoes not possible with other magnet materials. Sintered AINiCo offer slightly lower magnetic properties but better mechanical characteristics. it can be efficiently magnetized in any direction, and for anisotropic AINiComagnet, it generally has greater magnetic capacitive in a preferred orientation than isotropic types. AINiCo is hard and brittle, Machining or drilling cannot therefore be accomplished by ordinary methods. Holes are usually cored in at the foundry, and magnets are cast close to final size and then finish machined to closer tolerances. â?¢ Advantages of AlNiCo Magnet: 1.Customized designs are available. 2.Max working temperature can be as high as 550�°C. 3.Disadvantage: Br and BH(max)are not as high as rare earth magnet. 4.High energies and relatively low coercivity. 5.High magnetic flux density; low mold charge stable temperature properties; easy to shap.
Flexible magnets are low-cost extruded permanent magnets made by bonding a strontium magnetic powder ina flexible vinyl binder. Microcrystalline magnetic powder of flexible magnet leads to its high magneticperformance, and artificial rubber makes it very flexible. Its maximum magnetic energy product has reached 90KJ/ m3 (11.25MGOe), industrial mass production magnetic performance range of 16 to 68KJ/m3(2.0~8.5MGOe).Due to its excellent flexibility, it can assemble faster than molded magnets. Flexible magnetic sheets, magnetic strips and labeling magnets are easy to use and manipulate to your desired specifications. Advantages of Flexible Magnet: Flexible magnets are easy to use, easy to manipulate, low cost and extremely versatile. They can easily be cut, bent,twisted, slit, or coiled and adhere to multiple items and surfaces. In addition, flexible magnetic materials require no surface treatments so no special precautions need to be taken to protect the magnetic surface. Our simple sheet on Care Tips will ensure that the use of magnetic sheeting on vehicles will not mar paint finishes. Technical Data of Flexible Magnet: Shapes: Rolls or Sheeting & Strips Magnetization: Axially Magnetized Br: 1,600 Gauss BHmax:0.60 MGOe Hc: 1,370 Oersted's Max Operating Temperature:212F/100 Density(lb/in3): 0.133
Steel,steel pipe,steel tube,stainless steel,circular steel pipe,hollow section steel tube,pipe fitting,flange,fasteners,steel wire,steel accessories,steel product,magnet, ndfeb magnet,smco magnet,alnico magnet,ferrite magnet,ceramic magnet,flexible magnet,magnetic material,magnet accessories, chemical,organic chemicals,chemical additive.Transportation agent,customs clearance service,
Payment: T/T, L/C Delivery: 25 days after the order confirmation Package: standard package or as you required We offer customized products for your specific need. For more information about our products. Please
Electromagnet Kemeida Magnet currently operates in the largest of production lines to the smallest job shops and provides the same advantages of safety, high performance, and low operating cost for each user. For sheet, plate, block, round or angle, Kemeida has a magnet for any application. Let Kemeida's engineers evaluate the feasibility of applying our principle to your magnet application. How Electromagnet Works? Here we take scrap steel for example. An electromagnet can be used for moving scrap steel from one place to another. In a scrapyard, a crane has a large iron disc that is not a permanent magnet. The crane operator lowers the electromagnet into a pile of scrap steel and then switches on the electricity. This causes the steel disc to become a powerful magnet. Scrap steel is attracted to the disc. When the operator switches off the electricity, the scrap steel falls off the disc. In this way, large amounts of scrap steel can be moved easily from one place to another. Rectifier Controllers Electromagnets require direct current power for operation. Whether used in manual or automated handling of ferrous parts, they must release the work as readily as they attract and hold. Release is a function of the rectifier and not the magnet. These rectifiers incorporate a provision for reverse current that ensures positive release of even those alloy steels which are magnetically retentive. Variable power and remote control are available. Rectifiers and rectifier-controllers are designed to provide reliable D.C. power for industrial electromagnets. About Inquiry To help you get the best magnet for your application, we should have the following information: 1. What are the materials you want to attract? 2. What kind of steel and iron? For example: steel scraps, steel billet, ingot, plate, bar or ball. 3. What¡¯s the lifting capacity you expect? 4. What kind of working site does the magnet work? 5. Do you want the Cable Reel? If yes, tell me hoist height of the crane. 6. Do you want the electric controller?
Magnetic Writing and Drawing Board Material: ABS+ Magnet
Round and rectangular shape electro lifting magnet for lifting and moving steel materials.
Magnetic Stirrer Digital LCD Display Last Measurement in Memory Heating amp Stirring can proceed Simultaneously Bushless Motor for Low Noise Anti scratch and Corrosion Resistance Ceramic Plate Surface ABS Cabinet Brand Labtical Model NameNumber MS5LH Type Magnetic Stirrer Speed range 1002000rpm Maximum mixing capacity 5000 ml Temp Range amp Accuracy 300C Accuracy 1C Temperature Sensor PT100 Time range 099h99min Top Plat Size 168 x 168mm Display LCD Motor Type Bushless Motor Operating Mode Temperature Speed Timing Memory last data Power 500W Power Supply AC 220V 5060Hz Packing Dimension 335 x 235 x17cm Weight 25kg
