HS-FA2X1/2-S24-SF hybrid slip ring is designed to setup at the end of shaft or side of the machine, fit to pass fluid +signal or low current power. It is set in the body of rotary joint, the wire of rotor will lead out from the center. Stator side has flanges for setup.(More product information welcome to visit slipring.net.) Feature: 1) High quality bearing on both sides of shaft for smoothly operating; 2) No need to maintain; 3) High quality sealing materials for long life circle; 4) Special shaft provides an excellent wear resistance; 5) Al, Bass, stainless steel body for option; 6) Specially designed leak detection holes; 7) Stator side has flanges for setup. Technical spec: Speed 200Rpm Operate temperature -30,90 protect degree IP65 Housing Al alloy Part A:(Electornic Slip Rings) Channels 12 rings(for signal) Operation Voltage 0~240VAC/DC Current 2A/Ring Contact material Precious Metal Electric Noise Max.40m© Dielectric strength 500VAC@50Hz,60s Insulation resistance 500MΩ @600VDC Part B:(Rotary Joint) Channels 2 Ways Pressure 1.6Mpa Max Media compressed air/ vacuum Our products are widely used in: Security, Factory Automation, Electric Instrumentation, Medical, Aerospace, Marine,Civil and Military Fields.Such as: Crane, Giant Wheel, Cotton Picker, Medical Equipment, Detector,Rotary Tables,Robots,Strander, Webcam, Automatic Revolving Door,Exhibit / Display Equipment, Food Manufacturing Machine,Packaging Machine,Amusement Equipment, Irrigation Machine,Heated Rollers etc.
Slip rings also called a rotary electrical interface, Slip Ring Assemblies, Rotary Connector, Slip Ring Units.It can improve electromechanical capability, simplify system design, eliminate possible damage while rotation. Its the key apparatus of various precision rotary worktable, electric test instrument, manufacture and process control instrument.
The TH038 uses JARCH's fiber brush technology which offers several advantages over conventional slip ring contacts including multiple points of contact per brush bundle, low contact force and low contact wear. It provides an economical, readily available solution when a compact through-bore configuration is required. This unit provides a 6.0mm through-bore for routing hydraulic or pneumatic lines. The 2~5 amps /circuit are available in 1-24 ring.
In certain applications where a cylindrical shape slip ring will simply not fit into the available space or a very low profile is needed, a pancake or platter style slip ring can be used. The SNK012, with 20mm thickness and hol size 12.7mm, uses SenRing's fiber brush technology which offers several advantages over conventional slip ring contacts including multiple points of contact per brush bundle, low contact force per fiber and low contact wear rates
The PS065, with 2 ~ 24 circiuts and compact 5mm body thickness, which we call our disk slip ring . Benefits: Longer lead lengths available Power and signal combinations Rotor and stator lead exits gold alloy brush,Gold plated rings IP65 are optional More thickness available
Pancake slip rings are specially designed when length is at a premium but diameter is less restrictive; PS065 Hole size: 65mm , Thickness:5mm 2,3,4,6,8,12,18,24 circuit version
Slip rings can be used in any electromechanical system that requires unrestrained, continuous rotation while transferring power or data from a stationary to a rotating structure. JARCH HY Series Pneumatic Electrical Rotary Union Support 2-24 passage way Pneumatic/Hydraulic, it can combine with power,signal,Ethernet,USB,Devicenet,Control Net,Canbus on request. It also could be mounted by shaft or optional flange mounting.Passage media types can use Air/Gas, Chemical, DI / Tap Water, Oil, Water/Glycol. The JSR-HY050-4E-2L provide 2 passage 1" hydraulic oil, combine 2~ 36 circiuts Power and singnal or Ethernet electrical slip ring.The slip ring provide a rotary flange can be install on a rotary table.
Benefits: · Unique signal handling performance with minimal electrical circuit noise · Tight packaging to fit in the most demanding space constraints · Fully compatible with both analog and TTL control level signals · Precision ball bearings for long life · Sealed units available,IP67 optional · Rugged anodized aluminum construction · Low Cost ,Preferential prices
165mm 4 channel FORJ 2-24 electric circuits rotary joint slip ring for creel Feature: Combination of electrical and optical transmission Small in size Light in Weight OEM and ODM are welcome Option: Various fiber types Pigtail length Connector type Fiber length Number of optical channels
Test Equipment 3000rpm With 38.1mm Hole High Speed Slip Ring IP51 Rotary Electrical Joint Feature: 1.High speed up to 3000rpm 2.With 38.1mm throught bore 3.Precision ball bearings for long life 4.Protection:IP54 5.Tight packing
Description: Slip rings can be used in any electromechanical system that requires unrestrained, continuous rotation while transferring power or data from a stationary to a rotating structure. It is also called a rotary electrical interface, Slip Ring Assemblies, Rotary Connector, Slip Ring Units. It can improve electromechanical capability, simplify system design, eliminate possible damage while rotation. Its the key apparatus of various precision rotary worktable, electric test instrument, manufacture and process control instrument.
Description: Slip rings can be used in any electromechanical system that requires unrestrained, continuous rotation while transferring power or data from a stationary to a rotating structure. The HE025 support 4 channel 1000M baseT ethernet slip rings, with through bore size 25.4mm(1.0"), overall diameter 78mm, are standard, off-the-shelf, Color-coded lead wires are used on both the stator and rotor for simplified electrical connections.
Slip rings can be used in any electromechanical system that requires unrestrained, continuous rotation while transferring power or data from a stationary to a rotating structure. High-current slip ring series are characterized by higher current, adopt specific design and advance technology to meet different application requirements. At present, this series we produced could be up to 800 amperes current. Please let me know your requirements, we will provide the best solution for you. The JSR-BC060-3P200-15S provides 2 Circuits 400VDC 200A , and 15 circuits 24V 2A control signal .The Slip ring assemblies use carbon conduction , IP66 protection is optional .
Description: Slip rings can be used in any electromechanical system that requires unrestrained, continuous rotation while transferring power or data from a stationary to a rotating structure. It is also called a rotary electrical interface, Slip Ring Assemblies, Rotary Connector, Slip Ring Units,It can improve electromechanical capability, simplify system design, eliminate possible damage while rotation. Its the key apparatus of various precision rotary worktable, electric test instrument, manufacture and process control instrument.
Slip rings can be used in any electromechanical system that requires unrestrained, continuous rotation while transferring power or data from a stationary to a rotating structure. It is also called a rotary electrical interface, Slip Ring Assemblies, Rotary Connector, Slip Ring Units. It can improve electromechanical capability, simplify system design, eliminate possible damage while rotation. Its the key apparatus of various precision rotary worktable, electric test instrument, manufacture and process control instrument.
Slip rings can be used in any electromechanical system that requires unrestrained, continuous rotation while transferring power or data from a stationary to a rotating structure. It is also called a rotary electrical interface, Slip Ring Assemblies, Rotary Connector, Slip Ring Units.It can improve electromechanical capability, simplify system design, eliminate possible damage while rotation. Its the key apparatus of various precision rotary worktable, electric test instrument, manufacture and process control instrument.
DHS056-50-1F The main parameters Number of circuits 50 Working temperature -40 ~+65 Rated current can be customized Working humidity 70% Rated voltage 0~240 VAC/VDC Protection level IP54 Insulation resistance 1000M @500VDC Housing material Aluminum Alloy Insulation strength 1500 VAC@50Hz,60s,2mA Electrical contact material Precious metal Dynamic resistance variation 10M Lead wire specification Colored Teflon insulated & tinned stranded flexible wire Rotating speed 0~600rpm Lead wire length 500mm + 20mm DHS056-50-1F series photoelectric slip ring 1 channel optical fiber + electric hybrid slip ring 1 optical fiber (supports single-mode/multi-mode), can transmit 1 optical fiber and 1~50 electrical signal paths at the same time, suitable for 360-degree unrestricted, continuous or intermittent rotation, and at the same time need to rotate from a fixed position to Locations where large-capacity data and signals are transmitted can improve mechanical performance, simplify system operation, and avoid damage to optical fibers due to the rotation of movable joints. Features Can transmit single or multiple optical fiber signals, multi-channel rotation; Optical fiber connectors can be selected from FC, SC, ST, SMA or LC (PC and APC), etc., which can hybridly transmit power supply, control signals, micro power signals required for instrumentation and computer automatic control; It can be used with traditional electric slip rings to form photoelectric hybrid bus rings to transmit power and high-speed data; No contact, no friction, long life, up to 100 million revolutions (more than 200-300 million revolutions for a single core); Safe and reliable, no leakage, no electromagnetic interference, and can be transmitted over long distances;
SC slip ring capsule is a standard,off-the-shelf unit that uses gold contacts at the rotary interface.Color-coded lead wires are used on both the stator and rotor to distinguish, with double contacts & double precision roller bearings, it utilizes 90°V-groove rings to provide smoother running, lower torque and lower electrical noise. Flame-retardant plastic shell,6, 12, and 24 circuit models for Power and /or signal. A.)Specification: Channels 1~24 Ways Voltage 240V AC/DC Current Rating 2A/Ring Speed 300PRM Insulation Resistance 1000M@500VDC Dielectric Strength AC250V@60Hz, 60S Electrical Noise 60 milliohms MAX @ 5~10 rpm,50milliamps,6V DC Lead Size/Type AWG28 Sliver plated coppe,Type ET Teflon Lead Lengths 250mm Operate Temp -20+80 Storage Temp -30+90 B.)Feature: Compact miniature design, small size,fit for harsh space; Double precision roller bearings for lower torque & long life; Signal and power can be combined to deliver in the same slip ring; More installation flanges for option. C.) Option: Higher speed; Metal shell; Available connector and Heat-shrink tube; Length of lead wires can be customized. Our products are widely used in: Security, Factory Automation, Electric Instrumentation, Medical, Aerospace, Marine,Civil and Military Fields. Such as: Crane, Giant Wheel, Cotton Picker, Medical Equipment, Detector,Rotary Tables,Robots,Strander, Webcam, Automatic Revolving Door,Exhibit / Display Equipment, Food Manufacturing Machine,Packaging Machine,Amusement Equipment, Irrigation Machine,Heated Rollers etc.
With the increasing degree of factory automation, more and more mobile devices need to be powered or control signals transmitted. Although cable reels are easily overlooked, they are an efficient and stable mobile power supply solution. The driving mode of cable reel is divided into spring drive and motor drive. Use these two drive forms to retract the cables needed for mobile devices. When the device moves in the opposite direction, the reel spools. The retractable cable is the basic operation of the reel and is the key to the safety and efficiency of mobile devices. The use of cable reels can well accommodate the cables of mobile devices, avoiding the presence of exposed cables on the factory floor, thereby reducing personnel hazards. At the same time, the work efficiency is improved, the wear of the cable is greatly reduced, and the maintenance cost is reduced. The electric cable reel not only includes the winding body and the drive mechanism, but also includes a slip ring box. The slip ring box is equipped with a slip ring and a brush assembly installed according to the requirements of the cable. Its role is to transfer the electrical energy from the power supply point to the cable reel cable. The slip ring and the brush complete the process. This is a kind of effective transmission of electrical energy. However, brushes are consumables that need to be inspected regularly and replaced in time after wear. Victory-way Electronic(Shenzhen) Co., Ltd. is a professional manufacturer of conductive slip rings. The product design, production, and inspection process of cable reel slip rings are mature and advanced. Product quality is high quality and reliable. Our slip ring has been sold to more than 100 countries around the world and has won unanimous praise from customers. To ensure that the cable line is always smooth, the slip ring is indispensable. According to different installation methods of the conductive slip ring, it is divided into three types of structures: slip ring internal type, slip ring external type, and cantilever type. Among them, the internal type slip ring has a compact internal structure and beautiful appearance; the external type slip ring is easy to repair; the cantilever slip ring is suitable for winding longer and heavier cables. We select high-quality raw material suppliers; use advanced precious metal fiber brush technology to ensure the stable and reliable transmission of current and signal data; through scientific calculations, the pressure between the fiber brush and the ring road is optimized, making the slip ring Maximize the service life; every slip ring manufactured has undergone rigorous testing and provides comprehensive after-sales service.
Robots and robotic arms are machines that automatically perform work. Robots can replace or assist humans in all kinds of work. Any boring, dangerous, toxic, and harmful work can be shown by robots. With the development needs, robots and robotic arms are widely used in manufacturing and automation. Robots are indispensable automation equipment in the field of advanced manufacturing technology. The robot slip ring provides power and signals for the complex movement of robots and robotic arms, improves mechanical performance, simplifies system operation, and prevents sprains in the wire during rotation. Victory-way Electronic(Shenzhen) Co., Ltd. can design and produce various robots and mechanical arm slip rings according to your requirements. The robot arm slip ring transmits various current, control and sensor signals. Robot slip ring, mechanical arm slip ring features: 1 Long life, high protection, slip ring maintenance free; 2 Compact structure & appearance, light weight, easy to install; 3 Smooth operation, low torque, very low electrical noise, low resistance, no friction; 4 Multi-contact, multi-channel, multi-signal transmission; 5 High speed, high voltage, high protection level, high speed data transmission, high precision. Typical applications: industrial robots, robotic arms, underwater robots, etc. Electronic robots and mechanical arm conductive slip rings of Victory-way Electronic(Shenzhen) Co., Ltd. have long service life and low price. According to years of experience in designing and producing slip rings, power, control signals and high-frequency data can be combined in one device to simplify the structure and solve the problem of wire winding. .
