It has the characteristics of flat belt soft, V-belt friction, smooth transmission than V-belt, small profile size, high transmission efficiency (92% ~ 97%). When transmitting the same power, its structural width is 50% smaller than that of ordinary V-belt transmission. Multiple wedges transmit high power We are the world's top supplier of V-belts. Our main products are pk belt, V-ribbed belts, automotive timing belts, industrial timing belts, V-belts, toothed belts, etc. Please tell us your needs and we will give you the best service. PK belt advantages >Excellent flexibility >High transmission efficiency >Low noise >Power transmission belt with multiple longitudinal ribs >Torque is transmitted through the contact of the side of the belt rib and the groove of the pulley >Compared with V-belts, it has a larger contact surface area pk belt Features >High grade engineered rubber >Longer service life >Temperature range from -50â?? to +120â?? >Oil, heat,ozone and abrasion resistant >Reduce the space required by the drive system
Oilfield 2AWG EPDM material stainless steel tape armor ESP power cable Conductor size: 2 AWG Insulation: EPDM material Temperature rating: 232 Voltage grade: 4kV Jacket: Lead jacket Armor: Stainless steel tape armor
1AWG&2AWG&4AWG copper EPDM insulation Lead jacket 316L stainless steel armor ESP cable Conductor size: 1AWG&2AWG&4AWG copper conductor Insulation: EPDM material Temperature rating: 232 Voltage grade: 5kV Jacket: Lead jacket Armor: 316L stainless steel tape armor
Product Description Size:1mm to 50mm Width:2000mm (max) Length:any length Color:black,red,grey,green,blue,tan etc. Fabric insertion available for request. Product Feature Performance:With moderate hardness, good abrasion resistance and elasticity, working under the higher pressure status at the temperature of -35 degree to 60 degree in the air. Technical data: gravity:1.05~1.8; Tensile strength:not less than 2.0Mpa; Elongation:not less than 200%; Hardness:40~85 shore A Application / Models Usage:Apply to the pavement of disposable ground carriage and work table, electronic and thermal aging sites, which can be used as oil proof materials, etc.
according to your usage and requirements by rubber sheet , to customized production.
Place of Origin Hebei, China Brand Name RUIHUAN Model Number 003 Color Black Application Home Application Feature Flexible Usage Industrial Shock Absorber Shape Custom Shape MOQ 100 Meters Type Mold Compression Service Reply Within 24 Hours Function Dustproof Insectproof Soundproof Packing Customized Package
Type /Top width (mm) / thickness (mm) Sk / 9.5-10.0 / 7.5 Ax / 13.0 / 8.5 Bx / 17.0 / 9.5 Cx / 22.0 / 11.5 About 200 pcs packed in a 65*38*25 cm carton
Rubber Sheet: Nature Rubber, Viton Rubber, EPDM Use of Sheets: Automobile Industry, Construction industry, Space industry etc. Sample Service: Free Samples Good quality and sell well We provide raw materials for some large-scale factories in Europe.
The rubber seal The epdm profiles are used in various applications such as bus body building, construction industry, shipping industry, furniture edging, automtive and various other specification as per customers requirements.
EPDM profiles for Curtain Walls Structural Glazing Skydomes Water proofing
Product Description Aeroflex closed cell tube and Sheet Insulation is a flexible, closed cell and lightweight elastomeric material designed for insulating liquid cooling and heating lines. The closed cell structure of Aeroflex provides many advantages over most rigid insulations for cooling and heating lines, such as: A: Moisture & vapor resistance without using additional vapor barriers. B: Stable thermal conductivity (K. value) during service, due to its dense surface skins and closed cell characteristics. C: Outstanding ultraviolet and weather resistance. Aeroflex is an ideal insulation for frost control on cold water plumbing. It prevents heat gain and condensation problems on chilled water and refrigerant pipelines, and it also prevents heat loss from hot water plumbing, liquid and dual temperature piping. Product Feature: Aeroflex tubes and sheets insulate and prevent condensation when used in operating temperatures down to -57C(-70F) and insulate against heat loss up to125C (257F). Within these recommended operating temperatures, it will not affect the thermal efficiency and water vapor permeability of Aeroflex. The Closed Cell structure protects against moisture, and eliminates the need for a vapor barrier in most applications. However, under severe condition of high humidity (90% RH up), high temperature (32¡æ up) and low ventilation such as underground piping, AEROCOAT(Acrylic Emulsion Paint) is recommended for use as additional vapor barrier coating. Aeroflex insulation, made from high quality synthetic elastomers, has low density and closed cell structure. The products, therefore, have a stable low K Factor of 0.25-0.27 (at 50-90F mean temperature) which can save energy consumption on any heating and cooling lines. Aeroflex tube and sheet insulation have been specially compounded to meet the ASTM Standard No. D 635, UL-94 V, JIS Standard No. K 6911 and other standards. The products have low smoke density while burning, and unlike other thermoplastic materials, Aeroflex will not melt nor drip flaming balls; therefore, it will not cause flame transfer. The high elasticity of Aeroflex insulation minimize the vibrations and resonance of chilled water and hot water pipelines during operation. The flexibility and smooth surface of Aeroflex offer neat-finished appearance even at joints, tees, elbows and crosses. No decorative or protective coating is required for both indoor and outdoor installations. The flexibility of Aeroflex enables quick and easy installation bent or irregular piping. Due to its low and stable thermal conductivity, Aeroflex requires a thinner wall than other rigid insulations. Therefore, lesser space is needed for installation of Aerofle. Application: Aeroflex is an ideal insulation for frost control on cold water plumbing. It prevents heat gain and condensation problems on chilled water and refrigerant pipelines, and it also prevents heat loss from hot water plumbing, liquid and dual temperature piping.
Extruded rubber Extruded rubber is a major part of ebco's sale. We extrude sponge rubber, dense rubber, dense rubber with strands of filament and dense rubber with a wire carrier. This broad product range allows us to meet the most demanding requirements. We have compounds approved by ul which comply with the smoke and fire requirements for buses and transit vehicles. The majority of our products are custom but we do have a few profiles which are standard. We have various sizes of edge trim and edge trim with sponge bulbs for sealing purposes. Secondary operations are a common practice with extrusions. Profiles can be wound on reels or coiled on a cardboard disk. Parts may require the ends to have a unique cut or holes and slots cut along the length. To aid in application a pressure sensitive adhesive can be applied to meet the requirements you desire. Flocking is a process where synthetic fibers are glued to a profile to aid glass or a similar surface in sliding. Whatever your requirement we will be able to provide a product for you.
Rubber gasket Material:silicone, nbr, nr, epdm, sbr Shore a hardness range:30-80 Temperature endurance:-60-350
Worldpetrochem is one of leader VII pellet form and bale form, SPO, KENTAL.. Are you looking for best oil sources or best lubricant additives which can improve high viscosity index & low pour point ? With hundred years of experiences in Oils & Lubricants, World Petrochem FZE is well known as one of the biggest suppliers with main office based in UAE and representative offices in USA, South America, Europe, South Africa and Australia. Especially we are the largest supplier of Viscosity Index Improver Polymers branded as Esprene SPO, Lanxess, Keltan, Buna. Flexible payment terms drive you be safe with us. Long term relationship is what we are heading up. 25KG/BAG
We are Sapec Co., Ltd based in Ho Chi Minh , Vietnam. Our business is related to Chemicals industry and we specifically in additives for oil. Please find our product details below: Fragrances, TBN, Viscosity Index Improver and other lubricant additive Our company's specialized in trading and manufacturing high quality additives and chemicals for lubricant. Such as: - fragrances for lubricant - viscosity index improver - tbn for lubricant( solid and liquid) - other lubricant additives If you have requirement of these procducts, please do not hesitate to contact with us for futher information. If you have requirement of these procducts, please do not hesitate to contact with us for futher information. Contact details: Sapec Co., Ltd Add: 60A Truong Chinh, Tan Hung Thuan Ward, Dist 12, Ho Chi Minh City, Viet Nam Tel: 84 8 54272779/ 84 987930304( Ms Viet) Fax: 84.8.54272737 Your faithfully Sales and Purchasing Department Viet Nguyen Thank you for taking the time to go through our business profile. If there are any question, inquiry or comments, please feel free to contact us. 25kg in PP bag
Uncured and unvulcanized rubber compound.
Raw material brand: momentive, dupont, shinetsu, wacker, lanxess Material standard : astm d2000, sae j200, jis and so on Mold style: compression, injection, extrusion, lsr injection Application: used for automotive engine system. Lead time: according to clients' requirements Package : pe bag+outer carton or according to clients' requirements
The high-pressure pipeline system is composed of ductile iron pipe, fittings and TSP anchoring gasket with stainless steel teeth. The anchoring gasket is a rubber gasket with embedded stainless steel teeth. According to the size of the rubber ring, a certain number of stainless steel teeth are distributed in the gasket. The stainless steel teeth will bite the socket tightly to prevent the separation of the pipeline.
The high-pressure pipeline system is composed of ductile iron pipe, fittings and TSP anchoring gasket with stainless steel teeth. The anchoring gasket is a rubber gasket with embedded stainless steel teeth. According to the size of the rubber ring, a certain number of stainless steel teeth are distributed in the gasket. The stainless steel teeth will bite the socket tightly to prevent the separation of the pipeline.
The high-pressure pipeline system is composed of ductile iron pipe, fittings and TSP anchoring gasket with stainless steel teeth. The anchoring gasket is a rubber gasket with embedded stainless steel teeth. According to the size of the rubber ring, a certain number of stainless steel teeth are distributed in the gasket. The stainless steel teeth will bite the socket tightly to prevent the separation of the pipeline.