Diesel Oil Suppliers and Manufacturers

Product Name : Fuel Oil / Light Diesel Oil (LDO) Flash Point : 62 Density @ 15c : 0.907 Viscosity @ 50c : 17.72 Viscosity @ 100c : 5.05 Water Content : less than 1. Sediment by Extraction : 0.57 Ash Content : 0.931 Caloric Value : 10151 Available at Mumbai

Diesel Gas Oil D2

Commodity: EN590 DIESEL GAS OIL ULTRA-LOW SULPHUR 50PPM (EURO 4) Specifications: (See attachment on the next page 3 of 8) Origin: Russian Federation Quantity: 100,000 MT per month Contract Term: 12 months with R&E (rolls and extensions) Price: US$_________ per MT, Gross Commission: To be handled by United Spirit Corporation as per agreement with the buyer and the seller. Financial Instrument Method: SBLC or BG or IRDLC non-transferable, auto-revolving Terms of Payment: Swift MT103/Telegraphic Transfer (TT) payment

We are supplier of Diesel D2 oil from Singapore. We accept small quantity like 3000MT,3000MT ,6000MT..Ect. The price and quality will be offer after get your detail requirement. Buyer should clarify the specification if need to proceed: 10 ppm (En590 or Euro) or 50 ppm (Euro 4) or ppm 200-500 Please note no need ask for SCO unless there is serious buyer If you are small or middle buyer,it is very hard to buy from Russia. So buy from southeast Asian is the best choice. I am sure that you will satisfy with our offer . If you are serious buyer,we can arrange TTM and also accept 100% LC at sight payment.

E590 10PPM, Diesel E590 Gost Diesel Fuel Oil D6

Waste plastics pyrolysis plant refining equipment is now very common. Common, but with the social progress, economic development, the energy crisis has become more and more serious trends. The fuel oil cracked by the refinery equipment can also alleviate the energy crisis to some extent. In order to expand the use of the oil developed by the refinery equipment, DoingGroup has developed a recycling waste plastic pyrolysis plant oil to diesel oil equipment. It mainly uses high-temperature distillation and condensation to refine the fuel oil to obtain a clean and transparent non-standard diesel fuel. The main working flow of the recycling waste plastic pyrolysis plant oil to diesel oil equipment is as follows: 1. Pour the thermal oil into the heat transfer system and heat the base of the heat transfer system. The reactor is preheated. 2. The base of the reactor is heated and the fuel oil is distilled at a high temperature. The residue in the heavy oil can be separated and the light oil and gas will go to the next procedure. 3. Light oil and gas are liquefied through the condensing system and flow into the tank. 4. The light oil collected in the oil tank is degreased and desulfurized to obtain the final clean and transparent non-standard diesel oil. So where does the final revenue from running our recycling waste plastic pyrolysis plant oil to diesel oil equipment come from? The main products of the recycling waste plastic pyrolysis plant oil to diesel oil are non-standard diesel and carbon black. Their specific uses are as follows: 1. Non-standard diesel: mainly used for heavy machinery, generators, boilers. 2. Asphalt: Mainly used for paving and asphalt plant refining. The main advantages of DoingGroup's recycling waste plastic pyrolysis plant oil to diesel oil equipment are as follows: 1. The vertical reactor is easier to discharge than the horizontal reactor. 2. Double heating system, both base heating, heat conduction system, heating fast, short heating time, improve equipment operating efficiency. 3. The reactor can be customized according to the processing volume. One reactor has a capacity of 5 tons. If a capacity of 10 tons is required, two reactors can be customized, and so on.

PRICE: USD 260/MT Minimum order of 10,000MT-500,000 MT per Month

Diesel Gas Oil D2 GOST 305-8250

DIESEL GAS OIL D2 - TTT (FOB Rotterdam & Houston) Minimum quantity: 10,000 metric tons per month, Maximum quantity: 500,000 metric tons per month Procedure: 1. Buyer accepts seller's working procedure and issues ICPO to the End seller via Seller's representative. 2. Seller issues a commercial invoice and Buyer signs and returns commercial invoice on the due date along with Buyer TSA. 3. The Seller issues the following PPOP to the buyer for evaluation: a) Statement of Product Availability b) IPA c) Letter of Guarantee Upon receipt of the above PPOP Documents, the buyer provides signed IPA (Injection Programming Agreement) with his tank company to engage in injection Programming. 4. Seller provides the buyer with an Injection program a) Fresh SGS, b) Certificate Of Origin. c) ATSC (Authority to Sell and Collect) d) Tank Storage Receipt (TSR) e) Injection Report, and ATV (Physical Verification) with Unconditional DTA for Dip Test in the seller tank for product reconfirmation before injection into buyer tank. f) NCNDA/IMPFA draft to be signed by all intermediaries to secure commission. 5. Buyer makes 100% payment by MT103 TT wire transfer for the total product and Seller pays commission to all intermediaries involved in the transaction within 24 hours after confirmation of the buyer's payment. 6. Seller issues draft SPA to the buyer to review for R&E monthly deliveries. 7. Buyer reviews and approves the SPA and issues SBLC/IRDLC irrevocable, non- transferable, auto revolving for 12 months shipment value, documentary letter of credit for length of contract and for each lift per schedule. Buyer pays after Dip Test by MT103 Wire Transfer one each monthly quantity. 8. The subsequent delivery shall commence according to the terms and conditions of the contract. 9. Seller pays commissions to all intermediaries as per IMFPA/NCNDA 24 hours after receiving payment from the buyer.

D2 Diesel Gas Oil is offered by our end sellers considering the needs of diverse industrial sectors. We provide D2 Diesel Gas Oil in different grades. Our D2 Diesel Gas Oil is mainly used to run several industrial as well as commercial automobiles. We take up bulk orders of D2 Diesel Gas Oil and deliver it timely. Our D2 Diesel Gas Oil is available at competitive rates. Minimum ordered quantity of our D2 Diesel Gas Oil should be 50.000MT Grade Available: D2 DIESEL GAS OIL L-0.2-62 GOST 305-82 OFFICIAL GUARANTEED SPECIFICATION FOR RUSSIAN ORIGIN GAS OIL 0,2/62 GOST 305 â?? 82 RUSSIAN GAS OIL D2 GOST 305�­82 COMPONENT INIT MIN MAX Density@ 20 deg C Kg / m3 0.870 Colour 1.0 2.0 Flash point, PMCC Deg C (C) 57 66 Kinematic viscosity @20 deg C C ST 3.0 6.0 Pour point Deg C (C) (*) 10.0 Cloud point Deg C (C) (*) 5.0 Mercaptan Sulphur 0.01 Acidity, mg / 1000 cm3 5 Iodine number g/100g 6 Ash %wt 0.01 Total Sulphur %wt 0.01 0.02 Copper corrosion 3hrs@50 deg C (Typical) 1 A CCR on 10% Residues %wt 0.20 Cetane Index 45 Distillation range: - 50% Recovered Volume deg C (C) 280 - �­90% Recovered Volume deg C (C) 350 - Bacteria MBC Fibre / it 500 - Bacteria CFU Fibre / it 1000 (*) Summer from March to October (PP 5.0 degrees C) Summer from March to October (CP 0.0 degrees C) Winter from November to February (PP 10.0 degrees C) Winter from November to February (CP 5.0 degrees C) The product is guaranteed by Seller not to contain bacteria and other living organism contamination above normal level (1000 CFU/l).

DIESEL ENGINE OIL SAE 40 & SAE 50 Description High performance heavy duty engine lubricants to be used by all diesel engines, based on a blend of high quality solvent refined mineral oils. We offer attractive INCO delivery and an advanced additive package meeting our standards. SAE 40 Physical Characteristics PropertyTest methodSAE 40 Density @ 15oC, g/cm3ASTM D 12980.8 0.98 Viscosity @ 100oC, cStASTM D 44512.5 16.2 Viscosity IndexASTM D 227090 min. Flash Point COC, oCASTM D 92190 min. SAE 50 Physical Characteristics PropertyTest methodSAE 50 Density @ 15oC, g/cm3ASTM D 12980.8 0.98 Viscosity @ 100oC, cStASTM D 44516.3-21.8 Viscosity IndexASTM D 227090 min. Flash Point COC, oCASTM D 92190 min. Packing 16 Liter, 20 Liter, or 200 Liter Containers Award ISO 9001/2008 Handling and Precaution Temperature should not exceed 50oC for long-term storage. -

Commodity: Automotive Diesel Oil, Euro 4/ EN590 10ppm, Euro5, 50ppm, LCO, Jet Fuel A1 Origin: Russian Federation Pre-Order Price: $260/MT Minimum Order: 25,000 MT Duration of Supply: Unlimited Shipping Terms: FOB Port, CIF Payment Terms: We accept any bank instruments (ie: LC, MT103)

Valvoline Diesel Oil 15W40 CH4

Valvoline Diesel Oil 15W40 CI4

DIESEL-GAS OIL L0.2-62 GOST 305-82 (Diesel D2) Origin Russian Quantity: Quantity MINIMUM 50,000MT MAXIMUM 900,000MT x 12 months Loading Port: Vladivostok Delivery: CIF/FOB (AWSP) CIF Price: Gross 300.00 / Net $290.00 USD per Metric Ton, FOB Price: USD Gross $270/260 Net per Metric Ton, Commission: USD 5.00 seller side, USD 5.00 Buyer side Per Metric Ton

DIESEL-GAS OIL L0.2-62 GOST 305-82 (Diesel D2) Origin Russian Quantity MINIMUM 50,000 MT MAXIMUM 500,000 MT x 12 months C.I.F Price: Gross $210 USD / Net $200 USD per MT C.I.F ASWP F.O.B Price: Gross $170 USD / Net $160 USD per MT F.O.B Rotterdam Commission: Seller Side $5.00 USD , Buyer Side $5.00 USD per MT C.I.F ASWP Commission: Seller Side $5.00 USD , Buyer Side $5.00 USD per MT F.O.B Rotterdam

Description: VZEN IND I is a premium quality Biodiesel Oil. VZEN IND I is a renewable, clean-burning fuel oil free from Sulphur and best fuel for the environment. VZEN IND I Oils are made from a diverse mix of feed stocks including recycled cooking oil, soybean oil and animal fats. This non-petroleum-based product can be used as diesel fuel, textile lubricant and industrial heating oil fuel. VZEN IND I is environmentally friendly and biodegradable Oil. Our range of all products is widely appreciated by our clients.