Waste plastics pyrolysis plant refining equipment is now very common. Common, but with the social progress, economic development, the energy crisis has become more and more serious trends. The fuel oil cracked by the refinery equipment can also alleviate the energy crisis to some extent. In order to expand the use of the oil developed by the refinery equipment, DoingGroup has developed a recycling waste plastic pyrolysis plant oil to diesel oil equipment. It mainly uses high-temperature distillation and condensation to refine the fuel oil to obtain a clean and transparent non-standard diesel fuel. The main working flow of the recycling waste plastic pyrolysis plant oil to diesel oil equipment is as follows: 1. Pour the thermal oil into the heat transfer system and heat the base of the heat transfer system. The reactor is preheated. 2. The base of the reactor is heated and the fuel oil is distilled at a high temperature. The residue in the heavy oil can be separated and the light oil and gas will go to the next procedure. 3. Light oil and gas are liquefied through the condensing system and flow into the tank. 4. The light oil collected in the oil tank is degreased and desulfurized to obtain the final clean and transparent non-standard diesel oil. So where does the final revenue from running our recycling waste plastic pyrolysis plant oil to diesel oil equipment come from? The main products of the recycling waste plastic pyrolysis plant oil to diesel oil are non-standard diesel and carbon black. Their specific uses are as follows: 1. Non-standard diesel: mainly used for heavy machinery, generators, boilers. 2. Asphalt: Mainly used for paving and asphalt plant refining. The main advantages of DoingGroup's recycling waste plastic pyrolysis plant oil to diesel oil equipment are as follows: 1. The vertical reactor is easier to discharge than the horizontal reactor. 2. Double heating system, both base heating, heat conduction system, heating fast, short heating time, improve equipment operating efficiency. 3. The reactor can be customized according to the processing volume. One reactor has a capacity of 5 tons. If a capacity of 10 tons is required, two reactors can be customized, and so on.