PRODUCT CODE 2111 DESCRIPTION Methyl isobutyl ketone of 99.50% mass purity Appearance ASTM E2680 Colour Pt-Co Visual Clear and bright 10 max ASTM D1209; ASTM D5386 Water mass % 0.1 max ASTM D1364 Methyl iso-butyl ketone mass % 99.50 min GC Mesityl oxide mass % 0.20 max GC Acetone mass % 0.10 max GC Methyl iso-butyl carbinol mass % 0.30 max GC Acidity as acetic acid mass % 0.01 max ASTM D1613 Properties Units Limits Test Methods Density at 20â?? 0.800-0.804 ASTM D4052 Distillation at 101.3 kPa: Initial boiling point Dry point â?? g/ml 114.0 â?? 117.0 ASTM D1078 Residue on evaporation mg/100ml 1.6 ASTM D1353 Further Properties Units Typical values Test Methods The Sales Specification values are continuously checked, documented and stored within the scope of quality assurance. Further properties are of an informational nature only and are not checked regularly. If the Sales Specifications are complied with, it can generally be assumed that all further properties and typical data conform to the values given. Technical Data Sheet
Acetone Methly Ethyl Ketone (MEK) Methyl Isobuty Ketone (MIBK) Cyclohexano
1 141-78-6 Ethyl acetate 2 79-20-9 Methyl Acetate 3 123-86-4 Butyl acetate 4 108-32-7 Propylene carbonate 5 75-12-7 Formamide 6 127-19-5 N,N-dimethylacetamide 7 872-50-4 N-methylpyrrolidin-2-one 8 26171-83-5 1,2-butanediol 9 504-63-2 1,3-Propanediol 10 26761-45-5 2,3-Epoxypropyl neodecanoate 11 57-55-6 Propylene Glycol 12 108-94-1 Cyclohexanone 13 95-47-6 o-xylene 14 2238-07-5 Diglycidyl ether 15 122-60-1 Phenyl glycidyl ether 16 34590-94-8 Dipropylene glycol monomethyl ether 17 110-54-3 Hexane 18 109-99-9 Tetrahydrofuran 19 75-09-2 Dichloromethane 20 110-82-7 Cyclohexane
1 101-68-8 4,4'-Diphenylmethane diisocyanate 2 9016-00-6 Poly(dimethylsiloxane) 3 26471-62-5 Tolylene diisocyanate 4 100-42-5 Styrene 5 141-32-2 Butyl acrylate 6 107-13-1 Acrylonitrile 7 106-99-0 Buta-1,3-diene 8 75-38-7 1,1-difluoroethylene 9 9-38-9 Chlorotrifluoroethylene 10 111-44-4 2,2'-Dichlorodiethyl ether 11 1187-93-5 Trifluoromethyl trifluorovinyl ether 12 21645-51-2 Aluminum hydroxide 13 116-14-3 Tetrafluoroethene 14 116-15-4 Hexafluoropropylene 15 126-99-8 Chloroprene 16 103-11-7 2-Ethylhexyl acrylate 17 140-88-5 Ethyl acrylate 18 78-79-5 Isoprene 19 96-33-3 Methyl acrylate 20 1300-21-6 Dichloroethane
S.N CAS No. Item 1 9003-07-0 Poly(propylene) 2 25766-59-0 Polycarbonate resin 3 26062-94-2 Poly(butylene terephthalate) 4 9002-86-2 poly(vinyl chloride) 5 9002-88-4 Polythene 6 9003-56-9 ABS Resin 7 25212-74-2 Poly(1,4-phenylene sulfide) 8 25135-51-7 Polysulfone 9 110-63-4 Butane-1,4-diol 10 9003-35-4 Phenol-formaldehyde resin 11 9003-53-6 Polystyrene 12 9011-14-7 Poly(methyl methacrylate) 13 26009-03-0 Poly(2-Hydroxyacetic acid) 14 24980-41-4 Polycaprolactone 15 31533-76-3 Polyphenyl ether 16 29658-26-2 PEEK 17 9002-81-7 PolyoxyMethylene 18 26023-30-3 Polylactic acid 19 63428-84-2 Polyamide 20 25038-59-9 Polyethylene terephthalate
S.N CAS No. Item 1 100-21-0 Terephthalic acid 2 67763-03-5 Silsesquioxanes 3 9003-01-4 Acrylic acid 4 1333-86-4 Carbon black 5 80-62-6 Methyl methacrylate 6 61788-97-4 Haloperidol 7 75-38-7 1,1-difluoroethylene 8 100-42-5 Styrene 9 9002-84-0 Poly(tetrafluoroethylene) 10 124-04-9 Adipic acid 11 107-21-1 Ethylene glycol 12 126-30-7 Neopentyl glycol 13 85-44-9 Phthalic anhydride 14 106-89-8 Epichlorohydrin 15 9003-08-1 Amino resin 16 9006-03-5 Chlorinated rubber 17 13463-67-7 Titanium dioxide 18 12227-89-3 Iron Oxide Black 19 922-67-8 Methylpropiolate 20 538-24-9 Trilaurin 21 9011-05-6 Urea formaldehyde 22 79-41-4 Methacrylic acid 23 1314-13-2 Zinc oxide 24 80-05-7 Bisphenol A 25 121-91-5 Isophthalic acid
Garlic : Garlic nutrient-rich: every 100 grams of water containing 69.8 grams, 4.4 grams of protein, 0.2 grams of fat, carbon garlic Garlic (22 sheets) Water compound 23.6 grams, calcium 5 mg, phosphorus 44 mg, iron 0.4 mg, vitamin C3 mg. In addition, also contains thiamine, riboflavin, niacin, allicin, citral and selenium and germanium and other trace elements. Containing about 0.2% volatile oil, the main ingredient in the garlic allicin, with a bactericidal effect, is contained in the garlic of garlic acid by the role of garlic hydrolysis. Still contains a variety of allyl, propyl and methyl composition of thioether compounds.
Patchouli oil, eugenol usp, citronella oil, clove bud oil, nutmeg oil, isoeugenol, beta caryophyllene, cananga oil, vetiver oil rectified, vetiver oil md, methyl isoeugenol, cajeput oil, clove terpenes, fresh ginger oil, methyl eugenol, isoeugenyl acetate, eugenyl acetate, propenyl guaethol (vanitrope), patchouli terpenes, gurjun balsam (copaene), gurjun balsam (gurjunene), palmarosa oil, kaffir lime leaf oil, massoia bark oil, massoia lactone, dihydroeugenol, vetiveryl acetate, cocoa extract, coffee extract, natural caffeine anhydrous, caryophyllene acetate, caryophyllene formate, benzyl isoeugenol, geraniol natural, nutmeg oil safrole free, natural vanillin ex clove oil, patchoulol natural, lemongrass oil, natural methyl cinnamate.
Manufacturers of dyes and pigments like ultramarine blue, malachite green, methylene blue, methyl violet, Red iron oxide , yellow iron oxides.
Mibk is clear, colorless, flammable, volatile liquid, with an odor. Drum, iso tank
Freestyle Optium Ketone Test Strips
Product name: Raspberry Ketone Glucoside Other Name: RKG; raspberry ketone glucoside ketone; 4-[4-(beta-D-Glucopyranosyloxy)phenyl]-2-butanone INCI Name: RASPBERRYKETONE GLUCOSIDE Molecular Formula: C16H22O7 Molecular Weight: 326.34 Appearance: White crystalline powder;Well soluble in water Purity: 99% CAS NO.: 38963-94-9 EINECS No.: 1806241-263-5 Application: Used as skin lightening agent and whitening agent in cosmetics Raspberry ketone glucoside (RKG),a natural product in raspberry fruit, is an antioxidant that inhibits the synthesis of melanin and helps reduce the content of nitric oxide,which can damage the skin,make the skin rough and aging.The product also inhibits the formation of melanin and tyrosinase activity,making the skin whiter and brighter.It is recommended for skin care,sunscreen,whitening/lightening and age spots reduction products.
Methyl Isoeugenol / Methylisoeugenol / Metil isoeugenol Olfactive Profile : Spicy-clove, woody, floral, warm, bitter CAS No 93-16-3 ; 6379-72-2 EC No 202-224-6 FEMA No 2476 JECFA No 1266 Product Synonyms : MIE, methyl isoeugenol, isoeugenol methyl ether, iso eugenol methyl ether, derivative, reaction, synthesis, methylation, isomerization Clove trees are indigenous to the Maluku islands of Indonesia. Indonesia has been the dominant producer off clove buds and clove oil globally for decades. Indonesia is also the largest consumer of clove buds as a spice, which is primarily used in the kretek cigarette industry. It is due to this high demand for Clove Buds in the cigarette industry that farmers are using the remaining components (dry leaves, and stems/claws) of the clove tree to produce clove oil its derivatives thereafter
Methyl Eugenol / Metil Eugenol / Methyl eugenol Olfactive Profile : Spicy, earthy, soft, clove-like, carnation, floral, bitter, burning taste CAS No 93-15-2 EC No 202-223-0 JECFA No 1790 Product Synonyms : methyl ester, methyleugenol, methyl ester eugenol, phenylpropene, allylveratrol, Dimethoxy-4-(prop-2-en-1-yl)benzene, reaction, fractional distillation, fractionation Clove trees are indigenous to the Maluku islands of Indonesia. Indonesia has been the dominant producer off clove buds and clove oil globally for decades. Indonesia is also the largest consumer of clove buds as a spice, which is primarily used in the kretek cigarette industry. It is due to this high demand for Clove Buds in the cigarette industry that farmers are using the remaining components (dry leaves, and stems/claws) of the clove tree to produce clove oil its derivatives thereafter
Ketone Reagent 10Parameter Urine Test Strips(Pack of 100) Specifications: Keep away from light and moisture Contains 100 test strips in sealed single pack. Immediately close cap and do not remove desiccants Do not touch areas of reagents strips while testing as well as during result Read instructions before use Please note : This product is For Ketone analysis only (Not for Glucose) Description Ketone Reagent Test Strips for Urinalysis â?? Contains Pack of 100 Test Strips in sealed retail box pack.
CAS No: 103-26-4 EC No: 203-093-8 FEMA No: 2698 JECFA No: 658 Olfactive Profile: Fruity, balsamic, similar to strawberry. Product Synonyms : cinnamate, Methyl Cinnamate, Methyl cinnamate 103-26-4 Methyl trans-cinnamate 1754-62-7 Methyl (E)-cinnamate Cinnamic acid methyl ester Methyl cinnamylate Methyl 3-phenylacrylate Methyl (E)-3-phenylprop-2-enoate Methyl 3-phenylpropenoate trans-Cinnamic acid methyl ester trans-Methyl cinnamate (E)-Methyl cinnamate methyl-3-phenylprop-2-enoate Methylcinnamate CINNAMIC ACID, METHYL ESTER UNII-533CV2ZCQL Methyl cinnamate (natural) Methyl trans-3-phenyl-2-propenoate FEMA No. 2698 NSC 9411 Cinnamic acid, methyl ester, (E)- EINECS 203-093-8 methyl (2E)-3-phenylprop-2-enoate 533CV2ZCQL AI3-00579 2-PROPENOIC ACID, 3-PHENYL-, METHYL ESTER, (E)- CHEBI:6857 Methyl (2E)-3-phenylacrylate Methyl (E)-3-phenyl-2-propenoate
We are supplier and exporter of PVC Resin. PVC resin, the physical appearance is white powder, non-toxic, odorless. Relative density 1.35-1.46. It is thermoplastic, insoluble in water, gasoline and ethanol, expandable or soluble in ether, ketone, fatty chlorohy-drocarbons or aromatic hydrocarbons with strong anti--corrosiveness, and good dieletric property. PVC resin can be processed into various plastic products.
This is chemical setting Furan based chemical resistant mortar which is combination of Liquid and Powder, when mixed in proper proportion from workable mortar which after setting and curing give of liquid and give black highly cross linked composites. Furan When set and cured is resistant to highly corrosive acids, alkalis and to powerful organic solvents such as ketones, Aromatic and Chlorinated solvents. It has extreme resistant to Acidic & alkalis, Salts, Greases and Detergents. It resists to Organic & Inorganic acids at their boiling temperature. It is suitable against mild chlorine Gas (dry) phosphorous trichloride, pyridine at room temperature. Furan is especially useful where resistance to mixed media such as aqueous acids /alkalis and organic solvents is needed in chemical plant process and waste streams. Carbon filled Furan is used against corrosive effect of hydrofluoric acid & its salts. PREPARATION OF FURANE MORTAR : Mortar consist of Furan solution and Furan powder. The average mixing ratio necessary to obtain mortar with good working consistency is 1 part by weight Solution & 3 part by weight powder. The ratio will vary slightly depending on temperature and working conditions.Stir the liquid thoroughly before using. Place liquid in a suitable shallow mixing pan. Add powder by weight in the solution mix thoroughly and rapidly until all lumps are dispersed and the mortar is completely homogenous. Spread out the mortar in a thin layer, not more than ¾ thick, to dissipate the heat of reaction and lengthen the working life. Batch size can be varied depending upon the temperature and the speed with which the masons are working. Very large batches will become stiff quite rapidly. Make sure that all the Furan Motrar is used from the pan before another batch is mixed.When working at temperature above 40 C, very small batches not more than 2 Kgs, should be prepared. When working at temperature below 15C the liquid should be kept warm.
MethylParaben, E218, CAS no.99-76-3, HS code291829, is an anti-fungal agent often used in a variety of cosmetics and personal-care products. It is also used as a food preservative. Methylparaben is commonly used as a fungicide in Drosophila food media. As an experienced MethylParaben manufacturer and supplier, we has been supplying and exporting MethylParaben for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. MethylParaben Specification ITEM SPECIFICATION Appearance White crystalline powder Purity 99.0% Melting point 125- 128 Residue on ignition 0.1% Acidity (mg/g) 4.0- 7.0 Related substances 0.5% Identification Conform Clarity of solution Clear and transparent Heavy metal (as Pb) 10 ppm
CAS No. : 5026-62-0 Chemical Formula : C8H7O3 H.S.code : 291619 E No. : E218 Weâ??re Methyl p-hydroxybenzoate Manufacturers, Suppliers and Wholesalers in China.Based on our 15 years in food additives & ingredients market, we have a knowledge of China market and manufacturers. We can help our abroad customers save time selecting good manufacturers and update the current market in China. Methyl p-hydroxybenzoate, E218, CAS No.5026-62-0, also called methyl paraben, is an organic compound manufactured through chemical synthesis, available as White crystalline powder used as antioxidants. Methyl P-Hydroxybenzoate is often used as an anti-fungal food preservative in chewing gum, dairy products, fat spreads, fruit products, etc. It can inhibit drosophilia growth in the larvae and pupae stages. As Methyl p-hydroxybenzoate Manufacturers, Suppliers and Wholesalers in China, we supply Methyl p-hydroxybenzoate food grade FCC,USP,EP. Methyl p-hydroxybenzoate powder Specification ITEM STANDARD Appearance White crystalline powder Purity (on dry base)% 99 Melting point 125-128 Sulphated ash %
