Find Verified Cr 6061 2 Lubricant Level Sensor Suppliers, Manufacturers and Wholesalers

CR-6061-2 Capacitive Fuel Level Transmitter (Sensor) This sensor is a special product for lubricating fuel. It can be used for long-term operation in high temperature and high viscosity. It is tailored for accurate measurement of generator fuel level mechanical equipment.

The whole machine does not have any movable or elastic parts, and is resistant to impact, easy to install, high in reliability, high in precision, and good in performance and price. It can be installed in various occasions to accurately measure and control the fuel level of gasoline, diesel fuel and hydraulic fuel. It is also suitable for the measurement of various non-conductive liquids. Such products can also be used to measure conductive media in the case of particularly harsh on-site conditions, particularly severe electromagnetic interference, and particularly high agitation.

The core components of the product are converted into standard electrical signals (typically 4-20 mA) using an advanced RF capacitance detection circuit through a 16-bit microcontroller with precise temperature compensation and linear correction. Optional HART, CANBUS, 485 communication protocol for system configuration. The full range of transmitters are self-calibrating, allowing users to automatically calibrate zero and range with buttons or leads to suit different requirements in complex locations.

Working principle
The sensing part of the CR-6061-2 capacitive fuel level transmitter (sensor) is a coaxial container that causes a change in the capacitance between the sensor housing and the sensing electrode when the fuel enters the container. This variation is passed through the circuit. The conversion and accurate linear and temperature compensation, output 4-20mA standard signal to the display instrument.

Performance
Detection range: 0.05-5m
Accuracy: 0.5
Pressure range: -0.1MPa-0.6MPa
Probe temperature resistance: -50-100
Output signal: 4-20mA, 4-20mA superimposed HART communication,

485 communication, CAN bus communication
Power supply voltage: 12-28VDC (intrinsic safety type needs to be powered by safety barrier)
Fixing method: Thread mounting M20Ã?1.5, M27Ã?2, M18Ã?1.5, M16Ã?1
Flange mounting DN25, DN40, DN50.

Special specifications can be customized according to requirements
Probe diameter: Φ19,
Explosion-proof grade: intrinsically safe ExiaIIC T6 flameproof ExdIIC T5
Protection level: IP65
Intrinsic safety parameters: Ui: 28VDC, Ii: 93mA, Pi: 0.65W, Ci: 0.042uf, Li: 0mH

CR-6061-2 Capacitive Fuel Level Transmitter (Sensor) This sensor is a special product for lubricating fuel. It can be used for long-term operation in high temperature and high viscosity. It is tailored for accurate measurement of generator fuel level mechanical equipment.

The whole machine does not have any movable or elastic parts, and is resistant to impact, easy to install, high in reliability, high in precision, and good in performance and price. It can be installed in various occasions to accurately measure and control the fuel level of gasoline, diesel fuel and hydraulic fuel. It is also suitable for the measurement of various non-conductive liquids. Such products can also be used to measure conductive media in the case of particularly harsh on-site conditions, particularly severe electromagnetic interference, and particularly high agitation.

The core components of the product are converted into standard electrical signals (typically 4-20 mA) using an advanced RF capacitance detection circuit through a 16-bit microcontroller with precise temperature compensation and linear correction. Optional HART, CANBUS, 485 communication protocol for system configuration. The full range of transmitters are self-calibrating, allowing users to automatically calibrate zero and range with buttons or leads to suit different requirements in complex locations.

Working principle
The sensing part of the CR-6061-2 capacitive fuel level transmitter (sensor) is a coaxial container that causes a change in the capacitance between the sensor housing and the sensing electrode when the fuel enters the container. This variation is passed through the circuit. The conversion and accurate linear and temperature compensation, output 4-20mA standard signal to the display instrument.

Performance
Detection range: 0.05-5m
Accuracy: 0.5
Pressure range: -0.1MPa-0.6MPa
Probe temperature resistance: -50-100
Output signal: 4-20mA, 4-20mA superimposed HART communication,

485 communication, CAN bus communication
Power supply voltage: 12-28VDC (intrinsic safety type needs to be powered by safety barrier)
Fixing method: Thread mounting M201.5, M272, M181.5, M161
Flange mounting DN25, DN40, DN50.

Special specifications can be customized according to requirements
Probe diameter: 19,
Explosion-proof grade: intrinsically safe ExiaIIC T6 flameproof ExdIIC T5
Protection level: IP65
Intrinsic safety parameters: Ui: 28VDC, Ii: 93mA, Pi: 0.65W, Ci: 0.042uf, Li: 0mH

We are proposing about 1000 1200 Mt/ton monthly of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag
:
1. >85% Fe Average 600mm Max Fraction
2. >78% Fe Average 20-300mm Fraction

The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact

Paprika is a spice made from the grinding of dried fruits of Capsicum annuum (e.g., bell peppers or chili peppers). In many European languages, the word paprika refers to bell peppers themselves. The seasoning is used in many cuisines to add color and flavor to dishes. Paprika can range from sweet (mild, not hot) to spicy (hot). Flavors also vary from country to country.
Usage
Paprika is used as an ingredient in a broad variety of dishes throughout the world. Paprika is principally used to season and color rices, stews, and soups, such as goulash, and in the preparation of sausages as an ingredient that is mixed with meats and other spices.
Paprika can also be used with henna to bring a reddish tint to hair when coloring it. Paprika powder can be added to henna powder when prepared at home.
Paprika is also high in other antioxidants, containing about 10% of the level found in berries. Prevalence of nutrients, however, must be balanced against quantities ingested, which are generally negligible for spices.
Paprika oleoresin (also known as paprika extract) is an oil soluble extract from the fruits of Capsicum Annum Linn or Capsicum Frutescens(Indian red chillies), and is primarily used as a colouring and/or flavouring in food products. ...
Oleoresin Paprika is produced by the extraction of lipids and pigments from the pods of sweet red pepper, Capsicum Annuum L. Grown in temperate climates. An oil soluble extract with it is widely used in processed foods such as sausage, dressings, dry soluble seasonings, food coatings, and snack food seasonings.
Paprika Oleoresin, obtained from Capsicum, is a natural dye used as a colorant and a flavor enhancer in foods, meats and pharmaceuticals. It is obtained by percolation with a volatile solvent which should be removed subsequently, such as acetone, trichloroethylene, 2-propanol, methanol, ethanol and hexane. Capsaicin is the major flavouring compound, whereas capsanthin and capsorubin are major colouring compounds among variety of coloured compounds present in Paprika Oleoresin.
Uses
Foods coloured with paprika oleoresin include cheese, orange juice, spice mixtures, sauces, sweets and emulsified processed meats. In poultry feed it is used to deepen the colour of egg yolks.

Ginger root
Botanical name: Zingiber officinale Linn.
Family: Zingiberaceae.
Ginger oil and oleoresins are the volatile oil derived by steam distillation of ginger and oleoresin. It is obtained by percolating the powdered rhizomes of Ginger, Zingiber officinale with volatile solvents. Ginger contains 1-2 percent of volatile oil, 5-8 percent of pungent acrid oleoresin and starch. Zingiberene is the chief constituent in the oil of ginger. Oil is employed for flavoring all kinds of food products and confectionary and finds limited use in perfumery. Oleoresin, commercially called Gingerin contains pungent principles viz. gingerol and shogaol apart from the volatile oil of ginger and is used as an aromatic, carminative, stomachic and as a stimulant.

Oleoresin from ginger is obtained conventionally by extraction of dried powdered ginger with organic solvents like ethyl acetate, ethanol or acetone. Commercial dried ginger yields 3.5-10.0 per cent oleoresin. Ginger oleoresin is a dark brown viscous liquid responsible for the flavour and pungency of the spice.

Ginger of commerce or `Adrak` is the dried underground stem or rhizome of the plant, which constitutes one of the five most important major spices of India, standing third or fourth, competing with chillies, depending upon fluctuations in world market prices, world market demand and supply position.
Ginger, like cinnamon, clove and pepper, is one of the most important and oldest spices. It consists of the prepared and sun dried rhizomes known in trade as `hands` and `races` which are either with the outer brownish cortical layers (coated or unscraped), or with outer peel or coating partially or completely removed.
Ginger requires a warm and humid climate. It is cultivated from sea level to an altitude of 1500 meters, either under heavy rainfall conditions of 150 to 300 cm or under irrigation. The crop can thrive well in sandy or clayey loam or lateritic soils.
The composition of dry ginger is given below:
Dry Ginger rootMoisture:6.9 %
Protein:8.6 %
Fat:6.4 %
Fiber:5.9 %
Carbohydrates:66.5 %
Ash:5.7 %
Calcium:0.1 %
Phosphorous:.15 %
Iron:0.011 %
Sodium:0.03 %
Potassium:1.4 %
Vitamin A:175 I.U./100 g
Vitamin B1:0.05 mg/100 g
Vitamin B2:0.13 mg/100 g
Niacin:1.9 mg/100 g
Vitamin C:12.0 mg/100 g
Calorific value:380 calories/100 g.
Ginger Oleoresin is obtained by extraction of powdered dried ginger with suitable solvents like alcohol, acetone etc. Unlike volatile oil, it contains both the volatile oil and the non-volatile pungent principles for which ginger is so highly esteemed. Concentration of the acetone extract under vacuum and on complete removal of even traces of the solvent used, yields the so called oleoresin of ginger. Ginger oleoresin is manufactured on a commercial scale in India and abroad and is in great demand by the various food industries.

Castor meal is also variously called castor meal, castor residue, castor extract & de-oiled castor cake
Castor meal - the residue obtained from castor cake by the solvent extraction process - is one of the most versatile natural manures. It is truly organic manure which enhances the fertility of the soil without causing any damage or decay. It is enriched with the three big elements vital and conducive to the proper growth of crops - Nitrogen, Phosphorus and Potassium. It also has traces of nutrients like Manganese, Zinc and Copper, thus making it a balanced fertilizer. Moreover, it helps to neutralize the detrimental effects of chemical fertilizers. Apart from their contribution to Nutrients, they have a number of benefits in agriculture, which none of the synthetic fertilizers or pesticides can offer. They bring in the wonderful molecules that nature has designed to help the plants flourish naturally. They provide slow and steady nourishment, stimulation, protection from soil nematodes and insects; improve yields, and quality of product like taste, flavour, amino acid composition etc.
The pressed cake obtained after the expression of castor bean. The solvent extracted cake, although rich in protein cannot be used as cattle fodder because of its toxicity. However, it can be used as a fertilizer.
The protein content of castor seed meal varies from 21-48% depending upon the extent of decortications. It has an ideal amino acid profile with moderately high Cystine, mithionine, and isoleucine. But its ant nutritional substances, ricin, ricine and an allergen restrict its use in poultry feed, even at a very low level of inclusion.
Castor Cake is an excellent fertilizer because of high content of N (6.4%), Phosphoric Acid (2.55%) and Potash (1%) and moisture retention.
There is negative correlation between the contents of ricinine in castor seeds and oil content (r = -0.76). This content of ricinine in castor seed is determined by Agro climatic conditions.
Nutrient content of Castor Cake:
Organic matter - 75 - 80 %, Nitrogen - 4.0 - 4.5 %, Phosphorous - 1.5 %, Potassium - 1.25 - 1.5 %.
It also contains some micro nutrients viz., Calcium, Magnesium, Sulphur, Iron, Zinc, Manganese, Copper etc.
A typical composition of castor residue/meal is as follows:
Nitrogen - 4% min. approx.
Phosphorous - 1% min. approx.
Potassium - 1% min. approx.
Moisture - 10 - 12 % max. approx.
Oil Content - 0.7% max. approx.
Advantages:
1. It provides all the major & minor nutrients necessary for better plant growth.
2. It also helps in increasing the nutrient uptake by plants.
3. It improves the soil fertility and productivity.
4. It is known to protect the plants from nematodes and termites.
5. It improves the yield & quality of the farm produce.
6. It improves the physical, chemical and biological properties of soil

CR-6061-3 universal automotive fuel level sensor uses tomography technology to dynamically analyze various parameters of the sensor in the medium, automatically refresh the reference value and accurately compensate. The same sensor can be changed at any time to change the measurement medium or change the installation environment. It can be automatically adapted and accurately measured without recalibration, and is not affected by dielectric constant and temperature changes. For example, after a CR-6061-3 automotive fuel level sensor is installed in a automotive , the automotive travels from the south of the country to the north, no matter how the fuel label is changed, or what additive is added, it can be accurately measured without recalibration. Its true oil level. And temperature, radio frequency interference and other factors have no effect on the sensor.
Performance
Detection range: 0.05-1m
Accuracy: 0.1 level
Pressure range: as required
Probe diameter: 16
Supply voltage: 12-28VDC
Medium temperature: -50-125
Output signal: 4-20mA, 0-5V, 0-10V, 485 communication, 232 communication, CAN bus communication
Fixing method: Thread M20*1.5 or flange mounting, special specifications can be customized according to requirements
Explosion-proof grade: intrinsically safe ExiaIIC T6 flameproof ExdIIC T5

CR-6061-3 universal automotive fuel level sensor uses tomography technology to dynamically analyze various parameters of the sensor in the medium, automatically refresh the reference value and accurately compensate. The same sensor can be changed at any time to change the measurement medium or change the installation environment. It can be automatically adapted and accurately measured without recalibration, and is not affected by dielectric constant and temperature changes. For example, after a CR-6061-3 automotive fuel level sensor is installed in a automotive , the automotive travels from the south of the country to the north, no matter how the fuel label is changed, or what additive is added, it can be accurately measured without recalibration. Its true oil level. And temperature, radio frequency interference and other factors have no effect on the sensor.
CR-6061-3 type automobile oil level sensor can simultaneously output temperature signal from communication bus with accuracy of 0.1

Performance

Detection range: 0.05-1m

Accuracy: 0.1 level
Pressure range: as required

Probe diameter: Φ16
Supply voltage: 12-28VDC

Medium temperature: -50-125
Output signal: 4-20mA, 0-5V, 0-10V, 485 communication, 232 communication, CAN bus communication
Fixing method: Thread M20*1.5 or flange mounting, special specifications can be customized according to requirements
Explosion-proof grade: intrinsically safe ExiaIIC T6 flameproof ExdIIC T5

CR-6061-3 universal automotive fuel level sensor uses tomography technology to dynamically analyze various parameters of the sensor in the medium, automatically refresh the reference value and accurately compensate. The same sensor can be changed at any time to change the measurement medium or change the installation environment. It can be automatically adapted and accurately measured without recalibration, and is not affected by dielectric constant and temperature changes. For example, after a CR-6061-3 automotive fuel level sensor is installed in a automotive , the automotive travels from the south of the country to the north, no matter how the fuel label is changed, or what additive is added, it can be accurately measured without recalibration. Its true oil level. And temperature, radio frequency interference and other factors have no effect on the sensor.
CR-6061-3 type automobile oil level sensor can simultaneously output temperature signal from communication bus with accuracy of 0.1

Performance

Detection range: 0.05-1m

Accuracy: 0.1 level
Pressure range: as required

Probe diameter: Φ16
Supply voltage: 12-28VDC

Medium temperature: -50-125
Output signal: 4-20mA, 0-5V, 0-10V, 485 communication, 232 communication, CAN bus communication
Fixing method: Thread M20*1.5 or flange mounting, special specifications can be customized according to requirements
Explosion-proof grade: intrinsically safe ExiaIIC T6 flameproof ExdIIC T5

CR-6061-3 universal automotive fuel level sensor uses tomography technology to dynamically analyze various parameters of the sensor in the medium, automatically refresh the reference value and accurately compensate. The same sensor can be changed at any time to change the measurement medium or change the installation environment. It can be automatically adapted and accurately measured without recalibration, and is not affected by dielectric constant and temperature changes. For example, after a CR-6061-3 automotive fuel level sensor is installed in a automotive , the automotive travels from the south of the country to the north, no matter how the fuel label is changed, or what additive is added, it can be accurately measured without recalibration. Its true oil level. And temperature, radio frequency interference and other factors have no effect on the sensor.
CR-6061-3 type automobile oil level sensor can simultaneously output temperature signal from communication bus with accuracy of 0.1

Performance

Detection range: 0.05-1m

Accuracy: 0.1 level
Pressure range: as required

Probe diameter: Φ16
Supply voltage: 12-28VDC

Medium temperature: -50-125
Output signal: 4-20mA, 0-5V, 0-10V, 485 communication, 232 communication, CAN bus communication
Fixing method: Thread M20*1.5 or flange mounting, special specifications can be customized according to requirements
Explosion-proof grade: intrinsically safe ExiaIIC T6 flameproof ExdIIC T5

Surgical Gown LEVEL 2-LEVEL 4Blue AMMI Level 2-3 Gown Disposable Medical PP Non-woven Gown

SURGICAL GOWNS
� 
Surgical gowns are personal protective equipment used by many people in health care. Surgical gowns are used by surgeons and the surgical team for all types of procedures. Modern surgical gowns provide a breathable, protective barrier for the surgeons and all health care providers.
� 
Surgical gowns provide a barrier protection to prevent blood strikethrough and fluid contamination. Most surgical gowns are sterile and come in a wide variety of sizes and versions. Surgical gowns can be purchased alone or within surgical packs. There are many surgical packs for frequently performed procedures.
� 
Surgical gowns are produced non-reinforced or reinforced. Non-reinforced surgical gowns are less durable and designed for surgical procedures with low to moderate fluid contact. Reinforced surgical gowns have reinforced protection in specific critical areas for more invasive and intense surgical procedures.

Surgical gowns cover and provide a barrier for important areas from the shoulders to the knees and wrists. Surgical gowns are usually made with Set-In sleeves or Raglan Sleeves. Surgical gowns come with and without a towel.
Most surgical gowns are made from a fabric called SMS. SMS stands for Spunbond Meltblown Spunbond. SMS is a lightweight and comfortable non-woven fabric that provides a protective barrier.

Surgical gowns are usually rated by their AAMI level. AAMI is the Association of the Advancement of Medical Instrumentation. AAMI was formed in 1967 and they are a primary source of many medical standards. AAMI has four protection levels for surgical gowns, surgical masks, and other protective medical equipment.

Level 1: is used for Minimal Risk of exposure situations, such as providing basic care and cover gowns for visitors.
Level 2: is used for Low Risk of exposure situations, such as during common blood drawing procedures and suturing.
Level 3: is used for Moderate Risk of exposure situations, such as surgical procedures and inserting an Intravenous (IV) line.
Level 4: is used for High Risk of exposure situations, such as during long, fluid intense surgical procedures.

[Technical Indicators]
1. Industrial grade
Indicator Name/Indicator Value Powdered Products (F) Needle Products (Z)
Level 92 Level 93 Level 95 Level 92 Level 95
Appearance White or light yellow powder, without caking White or yellowish needle-like, without lumps
Active matter,% 92.0 93.0 95.0 92.0 95.0
Free oil,% 1.2 1.2 1.2 2.0 1.5
Inorganic salt,% Sodium sulfate 5.8 4.8 2.5 4.8 2.5
Sodium chloride 0.15 0.15 0.15 0.15 0.15
Moisture,% 2.0 2.0 2.0 4.0 3.0
PH value (1% aqueous solution) 7.5-9.5 7.5-10
Whiteness (WB), 90

2. Toothpaste grade
Indicator Name/Indicator Value Toothpaste Grade (Y)
(I) Level (II) Level (III) Level
Appearance White or yellowish powdery or needle-like, without caking
Active matter,% 95.0 93.0 93.0
Free oil,% 1.2 1.2 1.2
Inorganic salt,% Sodium sulfate 2.5 3.2 4.0
Sodium chloride 0.15 0.15 0.15
Moisture,% 2.0 2.0 3.0
PH value (1% aqueous solution) 8-9.3 8-9.3 8-10
Whiteness (WB), 90
Foaming capacity/mm 180
Heavy metal (as Pb)/ (mg/Kg), 15
Arsenic content (as As)/ (mg/Kg), 3
Total bacterial count/ (CFU/G), 100
Total number of molds and yeasts/ (CFU/G), 100
Fecal coliforms/G Not to be detected
Pseudomonas aeruginosa/G Not to be detected
Staphylococcus aureus/G Not to be detected
 
3. Latex grade
Indicator Name/Indicator Value Latex grade (powder, needle, liquid)
Aggregate grade Seed level Liquid K12
Appearance White or yellowish powdery or needle-like, without caking Light yellow transparent liquid
Active matter,% 94.0 92 28.5-30.5
Free oil,% 0.8-1.0 1.5-2.0 1.5
Inorganic salt,% Sodium sulfate 3.0 3.0 1.5
Sodium chloride 0.15 0.15 0.05
Moisture,% 3.5 3.5 -
PH value (1% aqueous solution) 8-10 7.5-9.5
Whiteness (WB), 90 -
Color Klett (30% active), - 60

4. Reagent grade
Indicator Name/Indicator Value Reagent grade
Level 99% Level 97%
Appearance White flaky crystals White powder
Solubility (1%, alcohol) Completely dissolved
Solubility (10%, aqueous solution) Completely dissolved
Chroma APHA (20%, deionized water), 15   -
Active matter (%), â?¥ 99 (on dry basis) 97
Petroleum ether soluble matter (%), 0.2 1.0
Sodium sulfate (%), 0.5 1.5
Sodium chloride (%),
Moisture (%), 1.0 2.0
PH value (1% aqueous solution) 6.0-8.0 6.0-11
Phosphate, 1ppm -
Lead (Pb), 2ppm
Iron (Fe), 1ppm
Nitrogen, 5ppm -
Arsenic (As), 0.1ppm
Fraction content (%), 99.0
Absorbance (3%, deionized water) 230nm 0.4
260nm 0.1
280nm 0.1 -
410nm 0.01

[Alias] foaming powder; sodium lauryl sulfate; sodium lauryl sulfate; sodium dodecyl sulfate, sodium dodecyl sulfate
[English name] Sodium dodecyl sulfate.
[Abbreviation] SDS
[CAS No.] 151-21-3
[Molecular formula] ROSO3Na R = C12alkyl, C12-C14alkyl
[Molecular weight] 288.38 (R = C12alkyl), 296 (R = C12-C14alkyl)
[Grade] It can be divided into industrial grade (GB/T15963-2008), toothpaste grade (QB/T2900-2012), latex grade and reagent grade according to application fields and standards.
[Technical Indicators]

[Performance and Applications]
This product is a white or yellowish sticky substance, commonly used in detergents and textile industry. Belon to an anionic surfactant.It is easy to dissolve in water, has good compatibility with anions and nonions, and has good emulsification, foaming, penetration, decontamination and dispersion properties. It is widely used in toothpaste, shampoo, shampoo cream, shampoo, washing powder, liquid washing, cosmetics and plastic demoulding, lubrication, pharmaceutical, papermaking, building materials, chemical and other industries.
(1) Used as detergent and textile auxiliaries, also used as toothpaste foaming agent, mine fire extinguishing agent, emulsion polymerization emulsifier, wool detergent, etc.
(2) Used as anionic surfactant, emulsifier and foaming agent
(Use 3) GB 2760-96 stipulates that it is a processing aid for food industry. Blowing agent; emulsifier; anionic surfactant. Used for cake, beverage, egg white, fresh fruit, fruit juice beverage, edible oil, etc.
(4) It is used as an emulsifier for drugs, cosmetics and synthetic resins. Foaming agent for toothpaste and fire extinguisher. Used as a detergent for fine silk and wool fabrics. Flotation agent for metal beneficiation.
(5) Used as detergent and textile auxiliaries, also used as toothpaste foaming agent, fire extinguishing foam liquid, emulsion polymerization emulsifier, pharmaceutical emulsion dispersant, shampoo and other cosmetics, wool detergent.
(Use 6) Biochemical analysis, electrophoresis, ion pair reagent

Kobe Bon Cabe Sprinkle Chili Powder.
Available Nori Level 3 240x4gr, Noro level 2 240x4gr, Teri Bottle 24x45gr, Original Level 10 240x5,5gr, Original Level 10 Bottle 24x45gr, Original Level 10 10x250gr, Rujak Level 10 240x7gr, Original Level 15 240x5,5gr, Original Level 15 Bottle 24x45gr, Original Level 15 400x2.5gr, Original Level 15 10x230gr, ROA Level 15 240x4,5gr, Original Level 30 240x4,5gr, Original Level 30 Bottle 24x40gr, Original Level 30 20x200gr, Max End Level 50 240x2.5gr. Product is Manufactured by PT. Kobe Boga Utama.

Bon Cabe Snack Makaroni Crispy
Available Level 15 (60x27gr), Level 10 (60x27gr), Cheese Level 2 (60x27gr), Level 50 (60x20gr). Product is Manufactured by PT. Kobe Boga Utama.

Gown Isolation Wholesale High Quality CPE Gown Plastic PE/CPE Isolation Gown with elastic cuff
Long sleeve with elastic cuff ,Tie-on neck and waist provide added comfort
 With elastic cuffs;
Individual sterile bag packing;
PE/CPE material� for durability and protection
Lightweight, closed-back design, secured with adjustable ties for maximum comfort
 Low-linting material helps to provide a clean environment

Surgical gowns 35g level 2 disposable blue surgical medical gowns

SURGICAL GOWNS

Surgical gowns are personal protective equipment used by many people in health care. Surgical gowns are used by surgeons and the surgical team for all types of procedures. Modern surgical gowns provide a breathable, protective barrier for the surgeons and all health care providers.

Surgical gowns provide a barrier protection to prevent blood strikethrough and fluid contamination. Most surgical gowns are sterile and come in a wide variety of sizes and versions. Surgical gowns can be purchased alone or within surgical packs. There are many surgical packs for frequently performed procedures.
� 
Surgical gowns are produced non-reinforced or reinforced. Non-reinforced surgical gowns are less durable and designed for surgical procedures with low to moderate fluid contact. Reinforced surgical gowns have reinforced protection in specific critical areas for more invasive and intense surgical procedures.
� 
Surgical gowns cover and provide a barrier for important areas from the shoulders to the knees and wrists. Surgical gowns are usually made with Set-In sleeves or Raglan Sleeves. Surgical gowns come with and without a towel.
Most surgical gowns are made from a fabric called SMS. SMS stands for Spunbond Meltblown Spunbond. SMS is a lightweight and comfortable non-woven fabric that provides a protective barrier.
� 
Surgical gowns are usually rated by their AAMI level. AAMI is the Association of the Advancement of Medical Instrumentation. AAMI was formed in 1967 and they are a primary source of many medical standards. AAMI has four protection levels for surgical gowns, surgical masks, and other protective medical equipment.

Level 1: is used for Minimal Risk of exposure situations, such as providing basic care and cover gowns for visitors.
Level 2: is used for Low Risk of exposure situations, such as during common blood drawing procedures and suturing.
Level 3: is used for Moderate Risk of exposure situations, such as surgical procedures and inserting an Intravenous (IV) line.
Level 4: is used for High Risk of exposure situations, such as during long, fluid intense surgical procedures.

Disposable surgical gowns level 2 3 4 CE&FDA approved SMS fabric hospital medical surgical gowns

With 4 waist belts;
With Hook & Loop at neck;
With knitted cuffs;
Individual sterile bag packing;
Poly-coated material for durability and protection
Lightweight, closed-back design, secured with ties for maximum comfort
Low-linting material helps to provide a clean environment
Long sleeves with knit cuffs provide added comfort

Tropicana Slim is low calorie alternative sweeteners for healthier lifestyle. It is the #1 alternative sweetener brand in Indonesia. The products helps to maintain blood sugar level by limiting sugar consumption and also maintain body weight and thus works to prevent diabetes. Available in 24 packs x 25/50/100 sachets x 2 gram. Packaging = English, Bahasa Indonesia. Port of Loading: Semarang, Indonesia. Note: We could paste sticker on each pack should there is any additional information needed (importer name, information in other language, etc). Please inquire us for further details.

Powerful lubricating cum penetrating agent with binding property for Linen and polyester yarns for direct warp and sectional warp. The primary purpose of the product is to increase the abrasion resistance of sized warp yarn. Wax and tallow base softeners and lubricants are hydrophobic in nature. Angelube-CE100 contains 100% hydrophilic heads. Its provides penetrating power and also cold water soluble. Its easy biodegradable and not affect the binding property of the size mix. When use tallow and wax in storage it wont spread out evenly in size mix. It causes formation of uneven film property in yarn. This is the main reason for the weaving efficiency fluctuation. Not like that Angelube-CE100 has fully emulsifying property and its act as excellent leveling agent. It provides even film property to whole size mix. It directly reduce warp breakages and improve productivity in fabric formation.