This item inculdes : 1 PC Closed loop Stepper Motor Nema23 57HBM10-1000 4A 110N-cm(155oz-in) 1 PC Mactching Driver WTSS570 Technical Specifications Part No.: 57HBM10-1000 Frame Size: NEMA34 Step Angle: 1.8 degree Voltage: 1.6V Current: 4.0A/phase Resistance: 0.44 Ohm/phase Inductance: 1.2 mH/phase Holding torque: 1.1N.m 155oz-in Rotor inertia: 300g-cm2 Number of wire leads: 4 Weight: 2 kg Length: 77mm
1 PC Closed loop Stepper Motor Nema34 86HBM80-1000-1 6A 900N-cm(1270oz-in) 1 PC Mactching Driver WTSS880 1 pc extra 3 M length cable Technical Specifications Part No.: 86HBM80-1000 Frame Size: NEMA34 Step Angle: 1.8 degree Voltage: 2.4V Current: 6.0A/phase Resistance: 0.4 Ohm/phase Inductance: 6.5 mH/phase Holding torque: 9N.m 1275oz-in Rotor inertia: 2300g-cm2 Number of wire leads: 4 Weight: 5 kg Length: 142mm
This item inculdes : 1 PC Closed loop Stepper Motor Nema23 57HBM20-1000 4A 210N-cm(300oz-in) 1 PC Mactching Driver WTSS570 Technical Specifications Part No.: 57HBM20-1000 Frame Size: NEMA34 Step Angle: 1.8 degree Voltage: 1.76V Current: 4.0A/phase Resistance: 0.44 Ohm/phase Inductance: 2 mH/phase Holding torque: 2.1N.m 300oz-in Rotor inertia: 480g-cm2 Number of wire leads: 4 Weight: 2 kg Length: 101mm
Introduction The d2hb882mb is an economical microstepping driver based on patented technology of longs motor.It is suitable for driving 2-phase 4-phase hybrid stepping motors .By using the advanced bipolar constant-current shopping technique , it can output more speed and torque from the same motor, compared with traditional drivers , such as l/r drivers .Its 3-state current control technology allows coil currents to be well controlled and with relatively small current ripple, therefore less motor heating is achieved. Features Low cost and good high-speed torque 14 selectable resolutions Supply voltage up to +80vdc Suitable for-2-phase and 4-phase motors Output current up to 5.86a Dip switch current setting 8different values Optically isolated input signals Pulse frequency up to 200khz Automatic idle-current reduction Small size (107*97*48), weight:1kg
Introduction The d2hb542ma is an economical microstepping driver based on patented technology of longs motor.It is suitable for driving 2-phase 4-phase hybrid stepping motors .By using the advanced bipolar constant-current shopping technique , it can output more speed and torque from the same motor, compared with traditional drivers , such as l/r drivers .Its 3-state current control technology allows coil currents to be well controlled and with relatively small current ripple, therefore less motor heating is achieved. Features Low cost and good high-speed torque Supply voltage up to +45vdc Output current up to 5.86a Optically isolated input signals Automatic idle-current reduction 14 selectable resolutions Suitable for-2-phase and 4-phase motors Dip switch current setting 8 different values Pulse frequency up to 200khz Dip switch current setting 8 different values Small size (122.2*90*33), weight:0.3kg
SD-2H086MB Features Low cost and good high-speed torque 14 selectable resolutions Supply voltage up to +80VDC Suitable for-2-phase and 4-phase motors Output current up to 5.86A Dip switch current setting 8different values Optically isolated input signals Pulse frequency up to 200KHz Automatic idle-current reduction Small size (107*97*48),Weight:1KG
SD-2H044MA Features Low cost and good high-speed torque Supply voltage up to +45VDC Output current up to 5.86A Optically isolated input signals Automatic idle-current reduction 14 selectable resolutions Suitable for-2-phase and 4-phase motors Dip switch current setting 8 different values Pulse frequency up to 200KHz Dip switch current setting 8 different values Small size (122.2*90*33),Weight:0.3KG
Q2HB88M Features (1) High performance, low price (2) Two group 32 channels constant angel and constant torque subdivision. Highest subdivision: 480 (3) The motor phase current is reduced to set current value 100 ms after receiving the last pulse edge (4) Bipolar constant current chopping circuit (5) Opto-isolated input/output (6) Driven current is adjustable continuously from 0.5A/phase to 8A/phase (0.4A/phase to 6.4A/phase) (7) Single power supply, voltage arrange from DC24/V to 80V (DC40V to130V) (8) Highest response frequency: 200Kpps (9) Over voltage protection, overheat protection, over current protection
Main features: 1. You can choose to use a single saw or a double saw for product stability, or a single saw for unstable products 2. Ensure the hygiene of the meat and ensure a smooth cutting surface 3. Waterproof design for quick cleaning 4. According to different uses, frozen meat, lamb chops, steak, fish 5. Adopting human-machine interface and intelligent operation panel 6. 30 sets of memory functions can be set 7. Feeding adopts servo motor, with high precision 8. The conveyor belt can be removed for cleaning Paramters : cutting thickness 1-50mm ,material thickness under 15cm . capacity 8-15times/min ,can adjustable.
Food Powder packaging machine Nuts packing machine ,Spices powder packing machine ...more information pls contact us . This machine is equipped with a dual CPU microcomputer control system a 5inch LCD display in Chinese or English a userfriendly operation interface automatic cursor detection and tracking and simpler operation Equipped with highprecision stepper motors to ensure the accuracy of the cutting position of each packaging bag Performance Adopting a straight screw feeding method to prevent direct adjustment of packaging weight during the packaging process without the need for shutdown effectively improving work efficiency Optional devices such as coding machine lower blade round corner punching inflation exhaust and vacuum can be installed Usage This machine is suitable for automatic measurement and packaging of powders such as milk powder coffee soy milk powder sesame paste lotus root powder dyeing powder seasoning powder medicinal powder etc Paramters Packing speed 3080bagsmin Bag length 30300mm Bag width 40430mmopen film width Weight 400kg Power 25Kw Packing volume 501000ml Machine size 820x1220x2000 Packing type back sealing
2-head packaging machine (also can 4-18head according different capacity choice) Packaging speed 15bags/min Bag length 90-320mm Bag width 80-210mm Overall weight 400kg Power 1.8kw/220v Packaging capacity 20-1000ml Outer packaging size 820 x1220 x 2500mm Packaging form Back sealing This machine is an intelligent weighing automatic quantitative packaging machine with four scales and microcomputer control. Suitable for quantitative packaging of granular materials such as miscellaneous grains, nuts ,pesticides, fertilizers, veterinary drugs, premixes, additives, laundry detergent, salt, monosodium glutamate, white sugar, seeds, rice, snacks, hardware, etc. Performance characteristics: 1. High precision digital sensors enable precise measurement to be achieved instantly. 2. The microcomputer control system is technologically advanced, easy to operate, and more reliable to use. 3. Fast and slow vibration feeding, automatic correction of errors, achieving high-precision packaging. 4. Four scales work alternately, with fast packaging speed. 5. High quality stainless steel is used for the material contact part, which is anti-corrosion, dust-proof, and easy to clean. Host configuration: This machine is equipped with a dual CPU microcomputer control system, a 5-inch LCD display in Chinese or English, a user-friendly operation interface, automatic cursor detection and tracking, and simpler operation. Equipped with high-precision stepper motors to ensure the accuracy of the cutting position of each packaging bag.
PMD006P3E is a kind of micro integrated stepper motor microstepping driver, which can be directly installed in the rear 42/57/86 etc series stepper motor, and which has the advantages of small size, strong driving force, and low heat and so on. PMD006P3E stepping motor driver can provide 0~6 continuous adjustable peak current, maximum 128 microstepping, free current which can be adjusted continuously.
A conveyor belt is a looped belt that is driven by and wrapped around one or more pulleys. It is powered by an electric motor and supported by a metal plate bed or rollers upon which the conveyor belt rests. The pulley that powers a conveyor belt is referred to as the drive pulley and has an unpowered idler pulley.
We are a manufacturer and can manufacture products according to our customer's design. Currently we are looking for qualified stocking distributors with competitive price and good discount in the world for mutually beneficial long-term relationship. We try our best to support our distributors and business partners to develop more market percentage. Please join us, let's create the glorious future together!
Surgical gown level 4 SMS PE disposable Water Proof high-quality non woven surgical protective gown for Hospital With 4 waist belts; With Hook & Loop at neck; Individual sterile bag packing; SMS coated with PE inside� for durability and protection Lightweight, closed-back design, secured with adjustable ties for maximum comfort Low-linting material helps to provide a clean environment.
Surgical gown aami level 4 gown nonwoven SMS disposable doctor gown factory With 4 waist belts; With Hook & Loop at neck; � With knitted cuffs; � Individual sterile bag packing; Poly-coated material for durability and protection Lightweight, closed-back design, secured with ties for maximum comfort Low-linting material helps to provide a clean environment Long sleeves with knit cuffs provide added comfort
Disposable surgical gowns level 2 3 4 CE&FDA approved SMS fabric hospital medical surgical gowns With 4 waist belts; With Hook & Loop at neck; With knitted cuffs; Individual sterile bag packing; Poly-coated material for durability and protection Lightweight, closed-back design, secured with ties for maximum comfort Low-linting material helps to provide a clean environment Long sleeves with knit cuffs provide added comfort
Surgical gown aami level 3 protective gown nonwoven SMS disposable doctor gown factory With 4 waist belts; With Hook & Loop at neck; With knitted cuffs; Individual sterile bag packing; Poly-coated material for durability and protection Lightweight, closed-back design, secured with ties for maximum comfort Low-linting material helps to provide a clean environment Long sleeves with knit cuffs provide added comfort
Disposable surgical gowns with CE&FDA approved SMS fabric hospital medical surgical gowns With 4 waist belts; With Hook & Loop at neck; With knitted cuffs; Individual sterile bag packing; Poly-coated material for durability and protection Lightweight, closed-back design, secured with ties for maximum comfort Low-linting material helps to provide a clean environment Long sleeves with knit cuffs provide added comfort
Surgical gown aami level 4 gown nonwoven SMS disposable doctor gown factory With 4 waist belts; With Hook & Loop at neck; With knitted cuffs; Individual sterile bag packing; Poly-coated material for durability and protection Lightweight, closed-back design, secured with ties for maximum comfort Low-linting material helps to provide a clean environment Long sleeves with knit cuffs provide added comfort
