1. Product Car Engine Ignition System Trainer Automotive device details The device uses six engines for ignition (including: common system; Hall type electronic ignition system; Magnetoelectric ignition system; Homologous system without emitter, in addition, independent self-ignition system without emitter). ... The structure and process of the school are fully demonstrated to meet the needs of secondary and higher education, general education schools and educational educational theory and maintenance equipment. Function of 1. Six typical Motorzungssystem e, which carries out electronic performance appraisal system is Kontaktzundsystem, Hall-zundsystem, this is from Induktionszundsystem photoelektrische Induktionszundsystem Nichtverteilergruppenzundungssystem and Nichtverteiler fully demonstrate that the composition and 49 years of power are not independent of Zundsystems. 2. The teaching board is equipped with 4 mm thick anti-corrosion, anti-pollution, smokeless, fire-free and humidity grade high quality plastic sheet, the surface is sprayed with special procedures; Indelible color circuit diagrams are printed on the panels to train trainees to compare directly with prototypes to understand and analyze the functional principles of different ignition systems. 3. Take a look at the panel of the control board. Detection devices are installed on the control board. 4. The half piece of Car Engine Ignition System Trainer Automotive device model plate is 1.5 mm thick, which is really a good-looking duralumin frame. The bottom coil is welded with steel and the surface is treated with a self-locking coil device. 5. The Teaching committee uses a standard power supply 220V ACV part of the network, which is converted to 12V DC power through internal transfer payment machines and fair judge. The lack of batteries can reduce the problem of rechargeable batteries. The 12V DC network set provides the blocking function 6. Configure a smart error matching system.
1. Product Car Engine Ignition System Trainer Automotive device details The device uses six engines for ignition (including: common system; Hall type electronic ignition system; Magnetoelectric ignition system; Homologous system without emitter, in addition, independent self-ignition system without emitter). ... The structure and process of the school are fully demonstrated to meet the needs of secondary and higher education, general education schools and educational educational theory and maintenance equipment. Function of 1. Six typical Motorzungssystem e, which carries out electronic performance appraisal system is Kontaktzundsystem, Hall-zundsystem, this is from Induktionszundsystem photoelektrische Induktionszundsystem Nichtverteilergruppenzundungssystem and Nichtverteiler fully demonstrate that the composition and 49 years of power are not independent of Zundsystems. 2. The teaching board is equipped with 4 mm thick anti-corrosion, anti-pollution, smokeless, fire-free and humidity grade high quality plastic sheet, the surface is sprayed with special procedures; Indelible color circuit diagrams are printed on the panels to train trainees to compare directly with prototypes to understand and analyze the functional principles of different ignition systems. 3. Take a look at the panel of the control board. Detection devices are installed on the control board. 4. The half piece of Car Engine Ignition System Trainer Automotive device model plate is 1.5 mm thick, which is really a good-looking duralumin frame. The bottom coil is welded with steel and the surface is treated with a self-locking coil device. 5. The Teaching committee uses a standard power supply 220V ACV part of the network, which is converted to 12V DC power through internal transfer payment machines and fair judge. The lack of batteries can reduce the problem of rechargeable batteries. The 12V DC network set provides the blocking function 6. Configure a smart error matching system.
TOYOTA: 3C-T,2C,3Y,2Y(TOWN ACE/LITE ACE) 1UZ,1ZZ,1KZ,3S-FE etc. DAIHATSU: EF 660cc AT, EJ1000cc AT JB660ccetc. HONDA: B20B 2000cc MT, D13B 1300cc AT, D15B 1500cc AT, D17A 1700cc AT, F18B 1800cc AT, F18B 1800cc MT, F20B 2000cc AT, F22B 2200cc AT, F23A 2300cc AT, J30A 3000cc AT, K20A 2000cc AT, L13A 1300cc AT, L15A 1500cc AT etc. MAZDA: ZJ 1500cc AT,F8 1800cc AT,MT,RF 2000cc AT etc. NISSAN: GA15 1500cc AT, GA15 1500cc MT, KA24 2400cc AT, QG18 1800cc MT, QR20 200cc AT, RB25 2500cc AT,CD20 2000cc AT,MT, RB20 2000cc AT,YD22 2200cc ATetc. SUBARU: EJ20 2000cc AT etc. SUZUKI: M13A 1300cc AT etc. TOYOTA: 1AZ 200cc AT, 1G 2000cc AT, 1JZ 2500cc AT, 1NZ 1500cc AT, 1SZ 1000cc AT,1UZ 4000cc AT, 2NZ 1300cc AT, 3S 2000cc AT, 3S 2000cc MT, 4A 1600cc AT, 5A 1500cc AT, 5E 1500cc AT, 7A 1800cc AT etc. TOYOTA ALLION : 1NZFE:1500CC 16 VALVE DOHC EFI TOYOTA COROLLA G : 1NZFE:1500CC 16 VALVE DOHC EFI TOYOTA PREMIO : 1NZFE:1500CC 16 VALVE DOHC EFI TOYOTA NOAH &VOXY : 1AZF SE: 2000CC 16VALVE DOHC EFI TOYOTA LITEACE : 7KE 1800CC TOYOTA PROVOX : 1NZFNE 1500CC 16VALVE DOHC EFI : 2NZFE 1300CC 16VALVE DOHC EFI TOYOTA COROLLA : AE100: 5AFE 1500CC 16VALVE DOHC EFI TOYOTA CORONA : 2YPU 1800CC
TOYOTA: 3C-T,2C,3Y,2Y(TOWN ACE/LITE ACE) 1UZ,1ZZ,1KZ,3S-FE etc. DAIHATSU: EF 660cc AT, EJ1000cc AT JB660ccetc. HONDA: B20B 2000cc MT, D13B 1300cc AT, D15B 1500cc AT, D17A 1700cc AT, F18B 1800cc AT, F18B 1800cc MT, F20B 2000cc AT, F22B 2200cc AT, F23A 2300cc AT, J30A 3000cc AT, K20A 2000cc AT, L13A 1300cc AT, L15A 1500cc AT etc. MAZDA: ZJ 1500cc AT,F8 1800cc AT,MT,RF 2000cc AT etc. NISSAN: GA15 1500cc AT, GA15 1500cc MT, KA24 2400cc AT, QG18 1800cc MT, QR20 200cc AT, RB25 2500cc AT,CD20 2000cc AT,MT, RB20 2000cc AT,YD22 2200cc ATetc. SUBARU: EJ20 2000cc AT etc. SUZUKI: M13A 1300cc AT etc. TOYOTA: 1AZ 200cc AT, 1G 2000cc AT, 1JZ 2500cc AT, 1NZ 1500cc AT, 1SZ 1000cc AT,1UZ 4000cc AT, 2NZ 1300cc AT, 3S 2000cc AT, 3S 2000cc MT, 4A 1600cc AT, 5A 1500cc AT, 5E 1500cc AT, 7A 1800cc AT etc. TOYOTA ALLION : 1NZFE:1500CC 16 VALVE DOHC EFI TOYOTA COROLLA G : 1NZFE:1500CC 16 VALVE DOHC EFI TOYOTA PREMIO : 1NZFE:1500CC 16 VALVE DOHC EFI TOYOTA NOAH &VOXY : 1AZF SE: 2000CC 16VALVE DOHC EFI TOYOTA LITEACE : 7KE 1800CC TOYOTA PROVOX : 1NZFNE 1500CC 16VALVE DOHC EFI : 2NZFE 1300CC 16VALVE DOHC EFI TOYOTA COROLLA : AE100: 5AFE 1500CC 16VALVE DOHC EFI TOYOTA CORONA : 2YPU 1800CC
Used Engines HS Code 840820 PRICE = US$1,800/PIECE CIF ORIGIN: THAILAND PACKAGE: TONS MIN ORDER:5 PIECES DESCRIPTION There are several types of engines used in automobiles. The car engine types are generally described based on two factors: the fuel type and engine layout/number of cylinders (cylinder configuration. One of the most common types of engines is petrol and diesel engines. But that's a generic way to describe a car engine. SPECIFICATION General Engine Specifications Basic Engine Specifications I-6, 4-Stroke-Cycle-Diesel Displacement .......................................................................... 12.88 L (in3) Rated engine speed .................................................................... 2300 rpm High idle speed ........................................................................... 2530 rpm Low idle speed (programmable) ................................................... 550 rpm Peak torque ......................................................... 3,355 N m @ 1200 rpm Bore ....................................................................................... 135 mm (in) Stroke ...................................................................................... 150 mm (in) Aspiration .................................. Supercharged-Turbocharged-Aftercooled Governor ............................................................................................. ECU Fuel system type .................................................................. Common Rail Length ........................................................................... 1960 mm (77.1 in) Length to flywheel housing ........................................... 1476 mm (58.1 in) Width ............................................................................. 1195 mm (47.0 in) Height ............................................................................ 1117 mm (43.9 in) Weight, net dry (approx.) ................................................1672 kg (3686 lb) Rotation (from flywheel end) .......................................... Counterclockwise Flywheel housing/flywheel .................................................... SAE No. 01M Flywheel teeth ....................................................................................... 155 Tolerances Power ............................................................................................... +/- 3% Exhaust Stack Temperature ............................................................ +/- 8% Inlet Air Flow .................................................................................... +/- 5% Intake Manifold Pressure ............................................................... +/- 10% Exhaust Flow ................................................................................... +/- 6% Specific Fuel Consumption .............................................................. +/- 3% Heat Rejection ................................
Used Engines
Led bulb, tube light, panel light, decoration light, wall light, steel wires, steel plate, stainless steel plate, twisted wire rods, galvanized wires, wire mesh, site fencing, mosquito mesh, thread rods, rebar, twisted rods, t bar, nuts and bolts, hardware, pvc pipes, upvc pipes, api pipes, melamine, mdf board, plywood, film faced, shuttering, packing, core veneer, face veneer, hdf molded door skin, door filler, tubular particle boards, pvc boards, wpc boards, doors, block board, hard board, gypsum board, canopy, carpet, flooring wooden, bamboo, laminated engineering, tiles, granite tiles, granite blocks, black galaxy, wash basin, water closets, washbasins, ss sinks, faucets, furniture, pvc edge bending, crew, locks, pvc seals, silicone cartridges, shower enclosures, shower door hinges, handles, knobs, brackets, slides, nails, solar panels, flexible solar panels, solar power station, battery, inverters, rechargeable fans, lights, spring, 3ply disposable face mask, oxygen concentrator ,.Buying office, oem, components sourcing, value added services
Product's name:Ride on Toy car Keywords:Toy car, Ride on car, Baby Car, Children Car Specification: Ride on toy car size (Injection Molding): 1175*720*545mm, ride on weight: about 12.5kg. Available in different colors and design.
Product of SC Johnson Indonesia All Kit Car Care products: Kit Black Magic Tire Gel, Kit Black Magic Tire Foam, Kit Wash & Wax, Kit Wash & Glow, Kit Detailer, Kit Paste Wax Original, Kit Paste Wax Restorative, Kit Rubbing Compound, Kit Paste Wax New Car, Kit Metalic Car Wax, Kit Gold Series, Kit Protectant, Kit Leather Care, Kit Multi Purpose Cleaner, Kit Wiper Fluid, Kit Auto Glass Cleaner, Kit GP-9, Kit Glass Polish, Kit Metal Polish, Kit Motor Paste Wax.
Product SC Johnson Indonesia Bay Fresh Hang n'Go
Product of Procter & Gamble Indonesia Products ranges from Ambi Pur Spray to Ambi Pur Car. Ambi Pur Spray: Sweet Citrus & Zest, Blossom & Breeze, Lavender Vanilla, Spring & Renewal, Linen & Sky, Downy Ambi Pur Car: Sky Breeze, Lavender, Thai Dragon, Vanilla, Tobacco, Pacific Air, Fresh & Cool, Pink, Aqua, Lavender Spa, Clip Fresh.
Car front seat organizer. It is specifically used to store documents, portfolios, books, laptops, marker pens, signature pens and other work materials that you need to work at any time. Allows you to easily find the documents you need while keeping the environment in the car neat and tidy. Large capacity front seat car organizer width 33.5x43 cm height, which can accommodate notebooks, 14 inch laptop, 1 marker, four signature pens, hand sanitizer, 2 umbrellas or water glasses and other commonly used items. Both sides are equipped with buckles to expand the capacity, allowing you to flexibly adjust the capacity of the storage bag to the number of items stored. Separate laptop compartment. The front seat organizer of the car has a separate laptop compartment filled with EPE material of sufficient thickness. To prevent scratching of the computer, the inner compartment is made of soft suede material. High-quality workmanship. The storage bag for the front seat is made of high-quality 600D polyester, which is dustproof, wear-resistant and shiny. An X-shaped reinforcement sewing method is used on the handle connection, which has a strong support force and avoids tearing due to continuous winding. We use high quality thick metal zipper, smooth and not easy to damage. Double fastening straps always remain stable. To prevent the storage bag from shaking or dropping items while driving, the storage bag is equipped with two adjustable fastening straps. Installation method: Step 1: Simply install the short belt on the headrest, Step 2: Wrap the long belt around the back of the car seat to attach it.
Product of SC Johnson Indonesia Product ranges are KIT Motor Quick Shine, KIT Motor Shampoo, KIT Motor Multi Guna, KIT Motor Chain Lube.
Product of SC Johnson Indonesia Bay Fresh Room Freshener range of products: Bay Fresh Everywhere, BayFresh Automatic Spray, BayFresh Aerosol.
Product of SC Johnson Indonesia. Product of Glass Cleaners: Mr. Muscle Clear, Mr. Muscle Windex. Available in Pouch, Spray Bottle, Jar.
Product of SC Johnson Indonesia Product Includes Pledge Furniture Polish Aerosol, Pledge Furniture Polish Liquid, Pledge Furniture Polish Oil.
Product of SC Johnson Indonesia SC Johnson Pledge Wood Floor Cleaner
Material: hdf Density:+950kg/m3 Door skin width: 660/740/840/920/1020mm Height: 2150mm Surface: natural wood veneer, melamine, enamel paint or plain door skin. We supply hdf moulded door skins, door panels, many designs to choose, with natural wood veneer, melamine finish, painted, with grains. Thickness 3.0 to 4.5mm, width of panel upto 1020. In natural wood veneer : sapele, mahogany, teak, golden teak, walnut. Wenge, black walnut, rosewood, oak, chinese oak, red white oak. Cherry, makore. Many of these veneers can be supplied with engineered veneered surface
1. Current overload or line surge shutdown 2. High temperature compressor shutdown. 3. High pressure alarm shutdown. 4. Low pressure alarm shutdown. 5. Low oxygen cocentrator alarm. Oxygen concentrator: 0.5-5L/min Purity: 95%+_3% Working system Continuous Power Supply AC230V.50Hz/AC220V.60HZ AC120V.60Hz Power: 390VA Net Weight: 16kg( Gross weight: 18.5kgs) Warranty: Long-life compressor designed for 1000 hours of maintenance-free use. Size: 33*26*54cm
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
