Feature: 1.Charges any 12v lead/acid batteries. 2.Can be used on motorcycles, cars, quad-bikes, golf caddies, electric vehicles, boats and any other similar application. 3.Suitable for both traditional wet batteries and gel/agm sealed batteries. 4.Waterproof socket for hard-wiring included. 5.Over-current protection 6.Over-voltage protection 7.Short circuit protection. 8.Reverse polarity protection. 9.Free spark 10.Full compatibility with a range of accessories. Output 1. Constant current: 0.95@12v 2. Led indicator light: 3 leds: power on, charging, charged 1. Weight: 1.1kgs 2. Size: 18.3*8.0*6.8cm 3. Package: 18pcs/carton] 4. Meas:46*37*27cm 5.N.W.:18kg 6.G.W.:19kg
INPUT 1. Rating Input Voltage: 220-240Vac Or 90-120Vac 50/60Hz 2. Max Rating Input Current: 2.0A 3. Max. Input Power: 180W OUTPUT 1. Output Max Voltage Range: 14.8V DC 2. Suit for Battery Capacity: 12V /30-300Ah 3. Battery Recovery Voltage(stage1): 4. Charging Current(stage 2): 9.5/12V 5. Charging Voltage(stage 3): 6. Floating Voltage(stage4): 7. LED Indicator Light: 6 LEDs: Power on, Reverse, Battery OK, Charging, Battery weak, Recovery 3 LEDs: Model selected light 8. Output Protect: OCP, OVP, Short-circuit Protection, Polarity Inversion Protection, Free Spark 1. Weight: 1.0 KGS 2. Size: 27*11*7.5CM 3. Package: 12PCS/Carton 4. Meas:60*37*25.5cm 5.N.W.:12KG 6.G.W.:13KG
This small portable rechargeable battery pack is designed for charging most mobile phones when travelling. Capacity is 2000mah.
Battery charger for miners' lamp Product features: Each charging contact has a charging module With such functions as data sampling, Intelligent ic identification voltage control, Conversion and short-circuit protection. It Can control the charging of mine lamps Comprehensively. The product works properly at a voltage of Ac - v. It is characterized by stable Circuit performance and strong anti- Interference and shock resistance. With dual Led mains and charging output indication, it Has such advantages as short charging time and High charging efficiency. In the course of Charging, the heat produced is little and Energy loss is low, thus prolonging the Service life of mine lamps effectively. Each charging contact has a built-in high- Precision sampling circuit with the function Of short-circuit, over-temperature and over- Voltage protection. The circuit makes real- Time abnormality judgment for each mine lamp During charging. Charging can be conducted only after cell Voltage and protection circuit are found Normal by charging contacts when the lamp Holders are fastened to connect the loop. The automatic conversion of constant current And constant voltage can be realized when each Mine lamp is charged through automatic data Sampling. In this way, each mine lamp can Realize the best charging effect. No converse leakage current and voltage. It is Not required to disconnect the positive and Negative electrodes of lamp holders in case of The power failure of equipment. With the feature of full-automatic operation, It is simple to use. Special operator is not Required so that maintenance expenses can be Saved. The company may produce the charging equipment Of various specifications and parameters According to the needs of customers.
Intelligent battery charger
48V/110V/220V/10A-5000A thyristor battery charger, IGBT battery charger, phase-controlled battery charger, modular battery charger, rack mount battery chargers are widely used for power substations, plants, electric car, lithium batteries, capacitors, etc.
1.3a/each slot, super fast charger with power bank function, using lithium batteries; 2. The charger has a backlit lcd display, which can display charging parameters and charging status of the battery. 3. Automatically stop charging when battery was fully charged, 10 gears for current setting by manual. 4.Intelligent battery temperature control function; 5.Ce, fcc certificates for quality assurance, 3 years guarantee. Parameters: Size: 5.67in*3.15in*1.83in Weight: 9.16ounces0.63b Material: fireproofing pc+abs Color: black Input voltage /current: dc 12v/3a Output voltage: dc 4.20v±1% / 1.48v±1% Output current: li-ion (max) 2*3a ni-mh/nicd (max) 2*1a Apply to: 4.20vïli-ion / imr / inr / icr)/10340 / 10350 / 10440 / 10500 / 12340 / 12500 / 12650/13450 / 13500 / 13650 / 14350 / 14430 / 14500 / 14650/16500 / 16340(rcr123) / 16650 / 17350 / 17500 / 17650/17670 / 18350 / 18490 / 18500 / 18650 / 18700 / 20700/21700 / 22500 / 22650 / 25500 / 26500 / 26650/ni-mh / ni-cd(1.48v) aaaa / aaa / aa / a / sc / c / d Package information: Package include: 1*c2-6000 1*adapter 1*user manual Adapter information: Input voltage: 100-240v Output voltage:12v Output current:3a Material: pc Advantage: 3a for each slot, super fast charging, 2pcs 2000mah batteries can be full charged in just 1 hour. Put the lithium battery into any slot, the charger become a power bank which can charge for mobile phones, tablet, mp4.Etc. Maximum output is 5v 1a. Note: The charger cannot charge the lifepo4; otherwise the battery will be charged to damage or even exploded. For the 4.35v li-ion battery, charger considers 4.20v as full charge in defaults. Do not use charger with output greater than dc15v, as the charger might get damaged. Do not use a small capacity lithium battery for mobile power output.
"*Charging & Starting *Suitable for 12/24V Lead-acid battery *Switchs set for different charging ampï *circuit breaker for safe charging * CABLE CORD SIZE / LENGTH: 3*1.5mm² , OUTSIDE 1.6M ;VDE euro two pins plug COPPER CABLE * Output cable size/length: 10mm²*1.8M10mm²*1.8M * Reference capacity(Ah): 20-700Ah * Rated starting current (A): 180A * Rated Charing current (A): 30A * FREQUENCY: 50/60Hz * VOLTAGE: AC 220-240V * Charging voltage (V): 12/24V * POWER: 0.6KW * CE Standard
"* Charging & Starting& Timing * Suitable for 12/24V Lead-acid battery * Fast Charging,Switchs set for different charging ampï * circuit breaker for safe charging * CABLE CORD SIZE / LENGTH: 3*2.5mm² , OUTSIDE 1.6M ;VDE euro two pins plug COPPER CABLE * Output cable size/length: 10mm²*1.8M 10mm²*1.8M * Reference capacity(Ah): 20-1000Ah * Rated starting current (A): 540A *Rated Charing current (A): 50A *FREQUENCY: 50/60Hz * VOLTAGE: AC 220-240V * Charging voltage (V): 12/24V * POWER: 2.0KW * CE Stanard
Solar Batteries,Gel Batteries,AGM Batteries,Nickel cadmium Batteries,Lithium batteries, Battery chargers, UPS, Static Frequency Converters, Motor Generator Frequency Converter,Rotary Frequency Converters, Dynamic frequency converter,Variable frequency drive,DC-DC Converters, Stabilizers, Solar Panel Clean Robots, Solar Inverters, 110Vdc Electricity Inverters, 125VDC Industrial UPS, POE DC UPS
Lithium battery charger Lithium battery charger 1-2 cellscc-cv110-240v 50/60mhz1aplastic 3-4 cellscc-cv110-240v 50/60mhz2aplastic or alu. 5-7 cellscc-cv110-240v 50/60mhz2aplastic or alu. 8-10 cellscc-cv110-240v 50/60mhz3aalu. 10-12 cellscc-cv110-240v 50/60mhz3aalu. 10-14 cellscc-cv110-240v 50/60mhz5aalu. Number of cellslithium battery charger(cc-cv)input voltagemax charge currentmaterial 1-2 cellscc-cv110-240v 50/60mhz1aplastic 3-4 cellscc-cv110-240v 50/60mhz2aplastic or alu. 5-7 cellscc-cv110-240v 50/60mhz2aplastic or alu. 8-10 cellscc-cv110-240v 50/60mhz3aalu. 10-12 cellscc-cv1 1 0-240v 50/60mhz3a alu. 10-14 cellscc-cv11 0-240v 50/60mhz5aalu.
This DFT-6600 Tester can charging, discharge, single body detection, online monitoring and activation of 5-in-1 multi-purpose, which Reduce the cost and reduce the labor intensity of maintenance personnel, and provide comprehensive scientific detection methods for battery and UPS power maintenance. This DFT-6600 Tester adopts new power consumption components, patented technology manufacturing, to achieve constant current discharge, Smart 3-stage charging, equal-charge / float-charge, constant current / constant voltage automatic conversion function; Real-time online circuit detection of the voltage of each single battery or the entire String of batteries, Real-time online display, detection, recording of the voltage of a single cell or the entire String of batteries, storing or transmitting the data to the PC; Large-screen LCD display, full English menu prompts, easy to operate, high degree of smart, Set and control voltage, current, time, capacity and other parameters, automatically complete the test and monitoring of various parameters of the battery string; Automatic discharge/charging, which can activate the battery and extend the service life of the battery. After charging/discharging, the detected data can be directly uploaded to the PC through the RS232 interface or transferred to the U-disk on site; The supporting data processing software processes the data information collected by the discharge/charging, analyzes the remaining capacity of the battery, and generates various charts, which provides a scientific basis for analyzing the performance of the battery
òMobile Cell Phone Battery Travel Charger NEW ò100% new high quality Advanced switching power supply circuit, highly efficient òAdvanced control chipset, stop charging automatically when battery is full charged òConnect the charger to the AC power source, the Charge light is On when the battery is charging òColor:As designed òSpecification: òInput:AC100V-240V 50/60Hz òOutput:DC4.25V,250mA MAX òSuitable capacity:200-3000MAH
This battery charger is designed charge 12V battery from 48V DC Power Supply. High efficiency, Battery Charging unit. Wide input voltage range, with over-current and over-voltage protection function. Model No: DLS-4812BC Input Voltage: 48V DC Output Voltage: 13.8V DC Output Current (A): 1, 3, 5, 8, 10, 12 A