Methyl Isobutyl Ketone Suppliers and Manufacturers

Methyl isoeugenol (isomethyleugenol) is a phenylpropanoid, the methyl ether of isoeugenol. It is one of the main components found in the essential oil extracted from Acorus calamus, bark of Croton malambo and rhizomes of Zingiber zerumbet, Hedychium coronarium and Etlingera cevuga.

Product Name: Hydroxypropyl methyl cellulose/Hypromellose Other Name: hpmc powder Molecular Formula: C3H7O Molecular Weight: 59.08708 Appearance: White Powder Purity: 99% CAS NO.: 9004-65-3 EINECS No.: 618-389-6 Supplier: ZHENYIBIO Hydroxypropyl Methyl Cellulose (HPMC) are water soluble polymers derived from cellulose. They are typically used as thickeners, binders, film formers, and water retention agents. They also function as suspension aids, surfactants, lubricants, protective colloids, and emulsifiers. In addition, solutions of these polymers thermally gel.

Product Name: Methyl-Beta-Cyclodextrin; beta-Cyclodextrin methyl ethers INCI Name: METHYL CYCLODEXTRIN Molecular Formula: C54H94O35 Molecular Weight: 1303.3 Appearance: White to off-white powder Purity: 99% CAS NO.: 128446-36-6 EINECS No.: 1308068-626-2 Supplier: ZHENYIBIO Methyl-�²-cyclodextrin is a cholesterol-removing agent mainly used for lipid raft disruption. It may also be used for detergent removal from protein-lipid-detergent ternary mixture to produce 2D membrane protein crystals due to its high solubility and affinity for detergents generally used in membrane protein chemistry.

Methyl Eugenol / Metil Eugenol / Methyl eugenol Olfactive Profile : Spicy, earthy, soft, clove-like, carnation, floral, bitter, burning taste CAS No 93-15-2 EC No 202-223-0 JECFA No 1790 Product Synonyms : methyl ester, methyleugenol, methyl ester eugenol, phenylpropene, allylveratrol, Dimethoxy-4-(prop-2-en-1-yl)benzene, reaction, fractional distillation, fractionation Clove trees are indigenous to the Maluku islands of Indonesia. Indonesia has been the dominant producer off clove buds and clove oil globally for decades. Indonesia is also the largest consumer of clove buds as a spice, which is primarily used in the kretek cigarette industry. It is due to this high demand for Clove Buds in the cigarette industry that farmers are using the remaining components (dry leaves, and stems/claws) of the clove tree to produce clove oil its derivatives thereafter

Methyl Isoeugenol / Methylisoeugenol / Metil isoeugenol Olfactive Profile : Spicy-clove, woody, floral, warm, bitter CAS No 93-16-3 ; 6379-72-2 EC No 202-224-6 FEMA No 2476 JECFA No 1266 Product Synonyms : MIE, methyl isoeugenol, isoeugenol methyl ether, iso eugenol methyl ether, derivative, reaction, synthesis, methylation, isomerization Clove trees are indigenous to the Maluku islands of Indonesia. Indonesia has been the dominant producer off clove buds and clove oil globally for decades. Indonesia is also the largest consumer of clove buds as a spice, which is primarily used in the kretek cigarette industry. It is due to this high demand for Clove Buds in the cigarette industry that farmers are using the remaining components (dry leaves, and stems/claws) of the clove tree to produce clove oil its derivatives thereafter

Ketone Reagent Test Strips for Urinalysis Contains Pack of 100 Test Strips in sealed retail box pack.

Ketone Reagent 10Parameter Urine Test Strips Specifications: Keep away from light and moisture Contains 100 test strips in sealed single pack. Immediately close cap and do not remove desiccants Do not touch areas of reagents strips while testing as well as during result Read instructions before use Please note : This product is For Ketone analysis only (Not for Glucose) Ketone Reagent Test Strips for Urinalysis â?? Contains Pack of 100 Test Strips in sealed retail box pack.

CAS No: 103-26-4 EC No: 203-093-8 FEMA No: 2698 JECFA No: 658 Olfactive Profile: Fruity, balsamic, similar to strawberry. Product Synonyms : cinnamate, Methyl Cinnamate, Methyl cinnamate 103-26-4 Methyl trans-cinnamate 1754-62-7 Methyl (E)-cinnamate Cinnamic acid methyl ester Methyl cinnamylate Methyl 3-phenylacrylate Methyl (E)-3-phenylprop-2-enoate Methyl 3-phenylpropenoate trans-Cinnamic acid methyl ester trans-Methyl cinnamate (E)-Methyl cinnamate methyl-3-phenylprop-2-enoate Methylcinnamate CINNAMIC ACID, METHYL ESTER UNII-533CV2ZCQL Methyl cinnamate (natural) Methyl trans-3-phenyl-2-propenoate FEMA No. 2698 NSC 9411 Cinnamic acid, methyl ester, (E)- EINECS 203-093-8 methyl (2E)-3-phenylprop-2-enoate 533CV2ZCQL AI3-00579 2-PROPENOIC ACID, 3-PHENYL-, METHYL ESTER, (E)- CHEBI:6857 Methyl (2E)-3-phenylacrylate Methyl (E)-3-phenyl-2-propenoate

We are supplier and exporter of PVC Resin. PVC resin, the physical appearance is white powder, non-toxic, odorless. Relative density 1.35-1.46. It is thermoplastic, insoluble in water, gasoline and ethanol, expandable or soluble in ether, ketone, fatty chlorohy-drocarbons or aromatic hydrocarbons with strong anti--corrosiveness, and good dieletric property. PVC resin can be processed into various plastic products.

This is chemical setting Furan based chemical resistant mortar which is combination of Liquid and Powder, when mixed in proper proportion from workable mortar which after setting and curing give of liquid and give black highly cross linked composites. Furan When set and cured is resistant to highly corrosive acids, alkalis and to powerful organic solvents such as ketones, Aromatic and Chlorinated solvents. It has extreme resistant to Acidic & alkalis, Salts, Greases and Detergents. It resists to Organic & Inorganic acids at their boiling temperature. It is suitable against mild chlorine Gas (dry) phosphorous trichloride, pyridine at room temperature. Furan is especially useful where resistance to mixed media such as aqueous acids /alkalis and organic solvents is needed in chemical plant process and waste streams. Carbon filled Furan is used against corrosive effect of hydrofluoric acid & its salts. PREPARATION OF FURANE MORTAR : Mortar consist of Furan solution and Furan powder. The average mixing ratio necessary to obtain mortar with good working consistency is 1 part by weight Solution & 3 part by weight powder. The ratio will vary slightly depending on temperature and working conditions.Stir the liquid thoroughly before using. Place liquid in a suitable shallow mixing pan. Add powder by weight in the solution mix thoroughly and rapidly until all lumps are dispersed and the mortar is completely homogenous. Spread out the mortar in a thin layer, not more than ¾ thick, to dissipate the heat of reaction and lengthen the working life. Batch size can be varied depending upon the temperature and the speed with which the masons are working. Very large batches will become stiff quite rapidly. Make sure that all the Furan Motrar is used from the pan before another batch is mixed.When working at temperature above 40 C, very small batches not more than 2 Kgs, should be prepared. When working at temperature below 15C the liquid should be kept warm.