ARMYTEK CLASSIC WITH IMPROVED FEATURES AND NEW DESIGN Wizard C2 is an updated version of the first multi flashlight in Armytek history. Suitable for those who need a flashlight with basic modes and the most simple operation possible. The brightness of this model reaches 1200 lumens at a distance of up to 108 meters. The 18650 Li-Ion 3200 mAh battery is charged inside the flashlight using a special magnetic USB cable. The universal Wizard C2 has several fixing options: on metal surfaces thanks to a magnet in the tailcap, on clothes, belt or bag using a clip, on the head with a comfortable headmount. Wizard C2 can be also used as bicycle headlight or main light source of an industrial worker the flashlight is compatible with bicycle mount ABM-01 and hard hat mount AHM-02.
A&S Construction Machinery Co., Ltd. supplies all types of Power take off (PTO). All the brands of PTO we can provide: VOLVO PTO, BOBCAT PTO, HYUNDAI PTO, etc.. For other parts of the brands above we can also provide cylinder liners, crankshafts, oil pumps, solenoid valves, solenoid coils, fuel injectors, batteries, radiators, compressors, gaskets and seals, mufflers, manifolds, turbochargers, hydraulic pumps, hydraulic motors, hydraulic valves, hydraulic couplers, bearings, reducers, bearing seats, gears, pulley, sprocket, coupling, drive shaft assembly, brakes, clutches, drive chains, actuators, alternators, cables, controllers, distributors, fuses and relays, harnesses, sensors, switches, gearcases, filters, counterweights, heater and A/C accessories, belts, etc.. Contact Us A&S Construction Machinery Co., Ltd.
A&S Construction Machinery Co., Ltd. supplies all types of transaxles. All the brands of transaxles we can provide: JOHN DEERE transaxles, BOBCAT transaxles, KAWASAKI transaxles, MITSUBISHI transaxles, etc. For other parts of the brands above we can also provide cylinder liners, crankshafts, oil pumps, solenoid valves, solenoid coils, fuel injectors, batteries, radiators, compressors, gaskets and seals, mufflers, manifolds, turbochargers, hydraulic pumps, hydraulic motors, hydraulic valves, hydraulic couplers, bearings, reducers, bearing seats, gears, pulley, sprocket, coupling, drive shaft assembly, brakes, clutches, drive chains, actuators, alternators, cables, controllers, distributors, fuses and relays, harnesses, sensors, switches, gearcases, filters, counterweights, heater and A/C accessories, belts, etc.. Contact Us A&S Construction Machinery Co., Ltd.
A&S Construction Machinery Co., Ltd. supplies all types of switches. All the brands of switches we can provide: CAT switches, KOMATSU switches, JOHN DEERE switches, SANY switches, XCMG switches, VOLVO switches, HITACHI switches, SUMITOMO switches, LIEBHERR switches, DOOSAN switches, CASE switches, BOBCAT switches, KUBOTA switches, YANMAR switches, HYUNDAI switches, DAEWOO switches, etc. For other parts of the brands above we can also provide cylinder liners, crankshafts, oil pumps, fuel injectors, batteries, radiators, compressors, gaskets and seals, mufflers, manifolds, turbochargers, hydraulic pumps, hydraulic motors, hydraulic valves, hydraulic couplers, bearings, bearing seats, gears, pulley, sprocket, coupling, drive shaft assembly, brakes, clutches, drive chains, actuators, alternators, cables, controllers, distributors, fuses and relays, harnesses, sensors, gearcases, filters, counterweights, heater and A/C accessories, belts, etc.
mowerequip.,.com/ Features for the Husqvarna CRT48-33K High blade speeds Offer higher productivity and better finishes. Optimum maneuverability Thanks to its balanced power-to-weight ratio and ergonomic twin lever controls. Smooth automatic operation A special variable clutch offers proper torque and speed range to match concrete conditions without mechanical adjustments. Since the clutch helps to keep constant torque the belt life is prolonged. Good visibility Front and rear lights as standard lets you perform in dim light and during night operations. Specifications Blades: 10 pcs Vibration value, m/s�²: 1.4 m/s�² Engine Motor/engine manufacturer: Kubota Motor/engine model: WG972 Output power (As rated by the engine/motor manufacturer): 31 hp. Power output: 31 hp. Exhaust emissions (CO2 EU V): 939.1 g/kWh
We are a wholesaler of leather goods , jackets , bags , belts. We deal in Cow and sheep leather of all grains and specifications. If interested please provide the following details : -type of product (designs and color) -price point you are interested in per piece. -colors and materials used .e.g types of buttons , zippers , satin , silk , viscose etc. - Type of leather .e.g full grain cow leather. -Expected time of delivery. - Min order : 100-500 pieces. IF required we can also arrange branding , tags etc. We can deliever the product to branded and ready to sell on your end. Payment term : TT Rest assured we deal in fair trade items and it is a family run business so we do not exploit our team members.
The pan of disc fertilizer granulator adopts the integral circular arc structure, and the granulation rate can reach more than 93 %. The granulation plate has three feeding holes, which is convenient for the production of intermittent production, greatly reducing the labor intensity and improving the labor efficiency. The speed reducer and motor adopt the flexible belt transmission, starting smoothly, slowing the impact force, and improving the service life of the equipment. The plates are reinforced with a number of radiant steel plates, which are durable and never deformed. Anabatic, thicken and strong base design makes the machine doesn t need the anchor bolts, and the operation is stable. The main gear of granulator adopts high frequency quenching, and its service life is doubled. There is high strength fiberglass in the granulation pan making the machine durable. The machine has the advantages of uniform granulation, high granulation rate, stable operation, durable equipment and long service life, which is an ideal equipment for users.
we have the best selection of rice for trading at the international level. All varieties of rice are available at our platform. We have the best quality rice available for trading. Each type of rice is sourced from the best fields in the world. Whether you are cooking a comforting bowl of risotto or a festive biryani, our rice is sure to elevate your culinary creations. We have several types of rice, each with its unique flavor, texture, and nutritional value. Following are the types of rice that are traded from our platform: 1121 â?? White Sella Rice. 1121 â?? Golden Sella Rice. Super Fine Sella 1121 - Basmati Rice. 1509 Rice. IRRI-6 . (5% broken and 100% broken) Steamed Rice We have Pakistan Origin.
We can provide the best quality and best quantity we are of Pakistan origin we have sizes of 55 to 70mm
If you're looking for high-quality and delicious yellow corn that is sourced from Pakistan, you're in luck! Our premium-quality yellow corn is carefully grown and harvested in the fertile lands of Pakistan, where the perfect combination of climate and soil conditions ensures optimal growth and flavor. Our farmers take great pride in their work, carefully planting and nurturing each and every corn plant to ensure a bountiful harvest. Once the corn is ready, it is carefully hand-picked and sorted to ensure only the best quality kernels make it to your plate. Whether you're looking to enjoy a healthy and satisfying snack on-the-go or looking to add some delicious crunch to your favorite recipes, our Pakistani yellow corn is the perfect choice. Its sweet, buttery flavor and crunchy texture are sure to delight your taste buds and keep you coming back for more. So if you want to experience the delicious and nutritious goodness of Pakistani yellow corn, look no further than our premium-quality product
Cable equipment like pe pvc, cable extruder production lines, rubber sulfur extrusion line, cable auxiliaries like gantry take up and pay off frame, crawler tractor, cable metal bellows laser (argon arc welding) welded pipe unit, blown film equipment like mulch film unit, shed film unit, geomembrane unit, water saving equipment like smd drip irrigation tape unit, soft belt unit, cylindrical drip irrigation pipe unit, labyrinth drip irrigation unit.
Model 4V222TIL Engine type 4 valve, 4 cycle, V type, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 1200(883)/2,300 Displacement( cc ) 21,927 Cylinder number - bore x stroke( mm ) 12 - 128x 142 Compression ratio 14.3 : 1 Firing order 1 â?? 12 â?? 5 â?? 8 â?? 3 â?? 10 â?? 6 â?? 7 â?? 2 â?? 11 â?? 4 â?? 9 Governor type of injection pump Mechanical variable speed (R.Q.V) Fuel consumption lit / h 239 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.6 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 200 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 103 / 92 Fresh water pump type Centrifugal type, driven by belt Sea water pump type Bronze impeller type driven by belt Direction of revolution Crankshaft Counter clockwise viewed from stern side Engine size (L x W x H) (mm) 1,874 x 1,243 x 1,548 Engine dry weight (KG) 1,960
Model 4V222TIM Engine type 4 valve, 4 cycle, V type, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 880(647)/2,100 Displacement( cc ) 21,927 Cylinder number - bore x stroke( mm ) 12 - 128x 142 Compression ratio 14.3 : 1 Firing order 1 â?? 12 â?? 5 â?? 8 â?? 3 â?? 10 â?? 6 â?? 7 â?? 2 â?? 11 â?? 4 â?? 9 Governor type of injection pump Mechanical variable speed (R.Q.V) Fuel consumption lit / h 160 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.6 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 200 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 103 / 92 Fresh water pump type Centrifugal type, driven by belt Sea water pump type Bronze impeller type driven by belt Direction of revolution Crankshaft Counter clockwise viewed from stern side Engine size (L x W x H) (mm) 1,874 x 1,243 x 1,548 Engine dry weight (KG) 1,920
Model 4L126TIL Engine type 4 cycle, In line, direct- injection, water cooled with turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 545(401)/2,200 Displacement( cc ) 11,051 Cylinder number - bore x stroke( mm ) 6 - 123x 155 Mean piston speed (m/sec. ) 11.4 Compression ratio 16.7 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 114 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 7.0 Alternator capacity ( V- A ) 24 - 80 Battery (V- Ah) 24 - 150 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 42 / 39 Fresh water pump type Centrifugal type, driven by V- belt Sea water pump type Rubber impeller type driven by V- belt Marine gear Model DMT240H (1.50 / 1.97 / 2.44 / 2.93 / 3.40), DMT260HL (3.53 / 4.08 / 4.52 / 5.04), DMTP6500 (5.11 / 5.62 / 5.91 / 6.57 / 6.95) Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) Marine Gear(DMT240H) without M/G mm 1,311 x 904 x 1153 with M. gear mm 2,031 x 904 x 1153 Engine dry weight without M/G kg 1,136 with M. gear kg 1,536
Model 4L126TIM Engine type 4 cycle, In line, direct- injection, water cooled with turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 495(364)/2,100 Displacement( cc ) 11,051 Cylinder number - bore x stroke( mm ) 6 - 123x 155 Mean piston speed (m/sec. ) 10.9 Compression ratio 16.7 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 102 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 7.0 Alternator capacity ( V- A ) 24 - 80 Battery (V- Ah) 24 - 150 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 42 / 39 Fresh water pump type Centrifugal type, driven by V- belt Sea water pump type Rubber impeller type driven by V- belt Marine gear Model DMT240H (1.50 / 1.97 / 2.44 / 2.93 / 3.40), DMT260HL (3.53 / 4.08 / 4.52 / 5.04), DMTP6500 (5.11 / 5.62 / 5.91 / 6.57 / 6.95) Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) Marine Gear(DMT240H) without M/G mm 1,311 x 904 x 1153 with M. gear mm 2,031 x 904 x 1153 Engine dry weight without M/G kg 1,136 with M. gear kg 1,536
Model 4L126TIH Engine type 4 cycle, In line, direct- injection, water cooled with turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 450(331)/2,000 Displacement( cc ) 11,051 Cylinder number - bore x stroke( mm ) 6 - 123x 155 Mean piston speed (m/sec. ) 10.3 Compression ratio 16.7 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 88 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 7.0 Alternator capacity ( V- A ) 24 - 80 Battery (V- Ah) 24 - 150 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 42 / 39 Fresh water pump type Centrifugal type, driven by V- belt Sea water pump type Rubber impeller type driven by V- belt Marine gear Model DMT240H (1.50 / 1.97 / 2.44 / 2.93 / 3.40), DMT260HL (3.53 / 4.08 / 4.52 / 5.04), DMTP6500 (5.11 / 5.62 / 5.91 / 6.57 / 6.95) Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) Marine Gear(DMT240H) without M/G mm 1,311 x 904 x 1153 with M. gear mm 2,031 x 904 x 1153 Engine dry weight without M/G kg 1,136 with M. gear kg 1,536
Aluminum Automotive Components Overview Aluminum is an essential item used in producing automotive aluminum parts and assemblies. EMP Die Casting is a leading provider of custom aluminum die cast components for the automotive parts market. We specialize in producing electric vehicle controller housing, enclosures, PDU housing, ACDC Converter housing, automotive structural parts, transmission housings, etc. EMP, one of the professional aluminium auto parts manufacturers, has been developing automotive parts for over 20 years. We provide one-stop services for aluminum casting projects, such as tooling design, die casting, CNC machining, and post-processing. At EMP, we stand ready to serve you with the custom automotive parts you need. Automotive Aluminum Parts Details Oil pan: Located in the lower part of the engine, detachable, and seals the oil shaft box and provides the outer casing of the oil sump. Bracket: The automobile wiper motor bracket serves as the installation structure of the wiper motor assembly. Along with installation accuracy, the stiffness performance of the bracket mounting point will directly affect the performance of the wiper system. Stop-start device gearbox enclosures for automatic vehicles: The gearbox is a mechanical device for increasing/decreasing torque by deceleration/increase. It consists of two or more gears, one of which is driven by a motor. The output speed of the gearbox is inversely proportional to the gear. Gearboxes are generally preferred in constant speed applications, such as conveyors and cranes, which can provide increased torque. EMP aluminum auto parts manufacturers, as one of has been developing automotive component enclosures for many years. As one of automobile aluminum component manufacturing companies, not only the parts mentioned above, but also a large number of aluminum die castings are under development. At EMP, we stand ready to provide you with the custom automotive parts you need. EMP Tech, as an excellent aluminium die casting parts manufacturer, offers a wide range of custom die casting for you to choose from.
IFE Public Transport Escalator An escalator is a type of conveyor that moves people horizontally or vertically between levels of a building or other structure. The public transport escalator is often used in public transportation systems such as airports, train stations, and shopping malls to help people easily access different levels of the building. IFE Public Transport Escalator List GRACES-700 GRACES-700 heavy-haul public transport escalator provides the safest, most comfortable and stable conveying equipment for crowded places such as subways, railway stations and airports. Public Transport Escalator Structure Why Choose IFE Public Transport Escalator? GRACES-700 heavy-duty public transport escalator adopts leading technology at home and abroad. And the drive host adopts a two-stage deceleration structure, which is highly efficient and energy-saving. The full frequency conversion control system is adopted to meet the needs of passenger flow at different times. The safety factor of the drive system reaches more than 8 to meet the safety of the equipment. The Important Role Of Transport Escalator Plays In Public In the dense flow of people and other public transportation places safety is particularly important. GRACES-700 escalator static load safety factor can reach more than 8 times, enough to cope with various harsh situation needs, the drive host adopts a two-stage reduction device, the transmission efficiency can reach 95%, effectively reducing power loss. All metal parts are made of corrosion-resistant materials, and the service life of the whole machine can reach more than 40 years, avoiding frequent replacement of parts during use, reducing the utilization rate of equipment, thereby improving the conveying rate of passengers.
Herm machinery high-quality fish feed pellet mill plant can produce various fish feed pellets, including grass carp feed, herring feed, carp feed, trout feed, tilapia feed, salmon feed, catfish feed, etc. The raw materials of the complete fish food plant production line include fishmeal, homemade fishmeal, alcohol masterbatch, soybean phosphatide, soybean meal, peanut meal, shrimp flour, sub-powder, wheat gluten meal, vegetable oil, etc. The final pellet produced is between 0.5mm-12mm. For example, grass carp 0.8-6.0mm pellet, herring 0.5-6.0mm pellet, carp 0.8-5.0mm pellet, bream 0.5-3.5mm pellet, rainbow trout 0.8-3.0mm pellet, trout:0.8-3mm pellet, tilapia:0.8- 4mm pellet. The complete fish feed production line includes a feed grinder, feed mixer, feed dryer, feed cooler, oil spray machine, and packing machine which are connected by conveyors or elevators. The feed pellet can float on the water for 12 hours at least. Adjusting the feed formulation also can make a sinking feed pellet. The pellet size is from 1mm to 12mm by changing the molds. The products can have different shapes, unique flavors, rich nutrients, and fine textures to meet the different eating habits of animals. With Super automation control and high production efficiency, this fish feed production line is the best choice for medium and big-sized feed mills and breeding farms.
Product Descriptions: This full-automatic quantitative vacuum sausage stuffer is filled by vane pump, driven by servo motor, operated by human-machine interface, and equipped with twisting and kinking structure, and its automatic motions are controlled by micro-computer. This machine is able to fill casing products like sausage, ham sausage, ham and etc. and to quantitative twist and kink those products which are wrapped by natural casings, collagen casings and fibrous casings. As well, this machine can fill boxed, bottled or canned product. The automatic blade compensation device in the machine can achieve the quantitative accuracy to �±3mm, and deliver material delicately. And the speed of filling, twisting and kinking, the number of twisting, weight of every segment can be adjusted. The filling process of this machine is under vacuum environment. The hopper could be flipped, which is easier to wash and clean. This machine is manufactured of stainless steel, and essential parts are treated specially, thus they are hard-wearing. And the controlling parts are imported; appearance is treated by advanced surface treatment technology. Those advantages make the machine reasonable structured, convenient to operate, easy to maintain. And at the end, with not mentioned security devices, this is an ideal equipment for meat processing industry. Main Features: 1. Simple structure in linear type ,easy in installation and maintenance. 2. Adopting advanced world famous brand components in pneumatic parts ,electric parts and operation parts. 3. High pressure double crank to control the die opening and closing. 4. Running in a high automatization and intellectualization,no pollution 5. Apply a linker to connect with the air conveyor ,which can directly online with other machine Technical Specification: Model BG-6000 Power 8kw, 380v/50hz/3 phases Filling Capacity 6000kg/h (100r/min) Quantitative accuracy �±2g Hopper volume 200L Kink speed 0-500times/min Quantitative Range 6~9999g Center height 980~1030mm(adjustable) Maximum vacuum degree -0.1Mpa Machine Weight 550kg Dimensions 1980x1125x1780mm