ER-TS-12200-Modbus Features: 1. Dual axis monitoring (single axis optional); 2. Full range accuracy 0.001 , resolution 0.0005 ; 3. Volume (94*74*64mm) (customizable). Introduction ER-TS-12200-Modbus High Precision Wireless Transmission Tilt Sensor is a wireless inclination sensor with ultra-low power consumption, small size and high performance, which is aimed at the industrial application of users without power supply or real-time dynamic measurement of object attitude angle. Powered by lithium battery, based on Internet of things technology Bluetooth and ZigBee (optional) wireless transmission technology, all internal circuits have been optimized and designed, and various measures such as industrial MCU, three proof PCB board, imported cable, wide temperature metal shell are adopted to improve the industrial level of the product. With good long-term stability and small zero drift, it can automatically enter the low-power sleep mode, so as to get rid of the dependence on the use environment. The product has compact structure, precise design, recompensation for temperature and linearity, and integrated comprehensive protection functions such as short circuit, instantaneous high voltage, polarity, surge, etc. it is simple and convenient to use. The wireless digital signal transmission method eliminates the cumbersome wiring and noise interference caused by long cable transmission; The industrial design has extremely high measurement accuracy and anti-interference ability. The wireless sensor nodes can form a huge wireless network, support thousands of measuring points to monitor the inclination at the same time, and support professional computer software. Without field survey, it can measure and record the state of the measured object in real time; The safety monitoring system is suitable for remote real-time monitoring and analysis of industrial sites, dilapidated houses, ancient buildings, civil engineering, tilt deformation of various towers and other needs. Features Dual axis monitoring (single axis optional) Range: �±30�° Accuracy: 0.001�°, resolution: 0.0005�° Volume (94*74*64mm) (customizable) Ultra low power consumption Powered by built-in rechargeable lithium battery Wide temperature operation -40~+85â?? IP67 protection grade Applications Bridge construction PTZ levelling Ship navigation attitude measurement High railway foundation tunnel monitoring Satellite solar antenna positioning Medical equipment Angle control of various construction machinery
Medicinal aluminum foil is generally made of electrolytic aluminum with a purity of more than 99% and is rolled. Aluminum has the advantages of abundant resources, low price, and easy processing. When used as pharmaceutical packaging materials, aluminum foil is the only metal material in the packaging materials. Aluminum foil is non-toxic, odorless, has excellent electrical conductivity and light-shielding properties, has extremely high moisture resistance, gas barrier properties and taste retention properties, and can effectively protect the packaged items. It is a packaging material that has yet to be replaced. Commonly used alloy numbers for medicinal aluminum foil: PTP medicinal aluminum foil: PTP medicinal aluminum foil is also called medicinal plate aluminum foil and capsule aluminum foil. It is mostly made of 8011-H18 aluminum foil or 8011-O aluminum foil. Blister medicinal aluminum foil: Blister aluminum foil is also called cold-formed medicinal foil. It is mostly made of 8021-O aluminum foil and is used for high-end high-end airtight, moisture-proof and light-shielding pharmaceutical packaging. The thickness is 0.04-0.065 mm; Medicinal tropical aluminum foil: Tropical aluminum foil is also called aluminum-plastic aluminum. Tropical blister packaging is equivalent to adding a cold stamped aluminum foil cover on the outside of a thermoformed plastic blister and PTP aluminum foil. 8021-O aluminum foil and 8079-O aluminum foil are mostly used, which are high-end packaging aluminum foils for pharmaceutical packaging; Advantages of medicinal aluminum foil: 1. High-precision printing, rich colors and clear patterns; plain foil can be printed online on automatic pharmaceutical blister packaging machines. 2. It has excellent light-shielding, moisture-proof, oxygen-blocking, moisture-proof, chemical stability and fragrance-preserving properties. 3. The protective layer has excellent high temperature resistance, and the heat sealing layer has good heat sealing performance. It can be heat sealed to PVC, PVC/PVDC, NY/AL/PVC and other composite sheets with good sealing performance. 4. Aluminum foil is used as the base material, which is easy to push or puncture, making it convenient for consumers to take. The packaged blister board is easy to carry, easy to transport, store and prevent contamination. 5. Suitable for high-speed automated production, and can provide products with different width specifications according to the user's packaging machine model.
Machines & Equipments Manufacturer Brand All machines and equipments are fully computerized. Reeling / Rewinding / Singeing & Hank to Cone Rite S.p.A ( Italy) Mercerizing Jaeggli Meccanotessile (Italy) Hank Dying Loris Bellini (Italy) Package Dying Loris Bellini(Italy) Dryer Loris Bellini (Italy) Lab Equipments Mesdan ( Italy) Color Matching System Data Color (USA) Auto Dosing System (Chemical / Dyes) Sate (Italy) In addition to above, state of the art lab along with various automatic systems have been installed to ensure better quality of end products and to protect and ensure safe working environment. Gul Ahmedâ??s Effluent treatment plant is another example of our efforts for being an environmentally and socially responsible company. Product Line: In this plant we are producing PACKAGE DYED YARN //GASSED MERCERIZED DYED Yarn from in 100% Cotton. We take this opportunity to offer you following Count Rang, based on samples approval. Gassed Mercerized Dyed Yarn: Ne 20/2 Carded Gassed Mercerized Dyed Ne 30/2 Carded Gassed Mercerized Dyed Ne 32/2 Carded Gassed Mercerized Dyed Ne 40/2 Carded Gassed Mercerized Dyed Ne 20/2 Combed Gassed Mercerized Dyed Ne 30/2 Combed Gassed Mercerized Dyed Ne 32/2 Combed Gassed Mercerized Dyed Ne 40/2 Combed Gassed Mercerized Dyed Ne 44/2 Combed Gassed Mercerized Dyed Ne 50/2 Combed Gassed Mercerized Dyed Ne 60/2 Combed Gassed Mercerized Dyed Ne 80/2 Combed Gassed Mercerized Dyed Ne 100/2 Combed Gassed Mercerized Dyed Ne 110/2 Combed Gassed Mercerized Dyed Ne 120/2 Combed Gassed Mercerized Dyed Cone Dyed Yarns: Ne 20/s Carded Dyed Waxed Ne 30/s Carded Dyed Waxed Ne 40/s Carded Dyed Waxed Ne 20/s Combed Dyed Waxed Ne 30/s Combed Dyed Waxed Ne 40/s Combed Dyed Waxed Ne 60/s Combed Dyed Waxed Ne 80/s Combed Dyed Waxed We can also accommodate other Count (Knitting or Weaving) of your interest.
ER-TS-22800 Feature: 1. Accuracy: 0.005 resolution: 0.0008 2. Measurement range: ± 30 3. Volume (94*74*64mm) (customizable). Introduction ER-TS-22800 protocol is a wireless tilt sensor with ultra-low power consumption, small size and high accuracy, for users without power supply conditions or real-time dynamic measurement of object attitude Angle industry applications. Powered by lithium battery, based on the Internet of Things technology Bluetooth, Zigbee (optional) wireless transmission technology, the use of industrial-grade MCU, triple-proof PCB boards, imported cables, wide-temperature metal shell and other measures to improve the productâ??s industrial level, good long-term stability and zero drift small, Low power sleep mode can be automatically entered, thus getting rid of the dependence on the use environment. Compact product structure, precision design, for temperature and linearity compensation again, Integrated with short circuit, instant high pressure, polarity, surge and other comprehensive protection functions, simple and easy to use, and wireless digital signal transmission mode eliminates the tedious wiring brought by long cable transmission, noise interference; Industrial-grade design has extremely high measurement accuracy and anti-interference ability, wireless sensor nodes can form huge wireless networks, supporting thousands of monitoring points for simultaneous inclination monitoring, supporting the professional computer software, no need for field survey, real-time data measurement and record the state of the measured object; Suitable for the industrial site, old dilapidated houses, ancient buildings, civil engineering, various tower tilt deformation remote real-time monitoring and analysis of the needs of the safety monitoring system. Product property Biaxial monitoring (uniaxial optional) Measurement Range: �± 30�° Accuracy: 0.005�°, resolution: 0.0008�° Volume (94*74*64mm) (customizable) Ultra-low power consumption Built-in rechargeable lithium battery power supply Wide temperature work:-40~+ 85â?? IP67, protection level Product application Billboard monitoring Bridge construction Cloud platform levelling Ship attitude measurement High Speed Rail Roadbed Tunnel Monitoring Satellite solar antenna positioning Medical equipment Various engineering machinery angle control
Xiongcai E3 Motor Controller For RC Car Performance, Handling and Reliability, We have All Xiongcai has stayed focused on motor controller for automotive fuel pump, water pump, RC car & truck, drones and medical devices since 2011, and focusing on motor controller only. I know that our clients can search a lot of companies that manufacture motor controller, but you will find that most of them provide OEM only. We are one of the few motor controller suppliers providing a full service from design to supply of finished product. Engineered from ground up, we provide solution according to customerâ??s application. For example, Xiongcai designed a high performance motor controller for RC car for a client. I believe most of manufacturer could make powerful motor controller, but the most important thing is how to control the power and eliminate the negative impact. Xiongcai E3 motor controller is such a perfect product for RC car for a notable brand. With 400A continuous current, 800A peak current, 6-12S Lipo cells, 16-54v high performance power system, how to control the monster? Xiongcai RD team designed perfect protection measures to protect the motor and keep it work at its best. a. Peak current limit. This measure will limit the peak current to avoid damage to motor; b. Single PWM periodical current detection limit enables reducing impact of pulse current to motor; c. Intelligent thermal management. Fans will be turned on or turned off automatically according to internal temperature; also when abnormal heavy current is detected, the motor controller will cut off power supply to fan, d. When a short-circuit takes place in fan, the test mode will start running. If the fan canâ??t be recovered in three times test, the power to fan will be cut off, and the ESC is still working; And there are some more protection measures, including low voltage protection, throttle loss protection, abnormal braking protection, over-temperature protection etc. Xiongcai motor controllers have been applying in top brands in automotive industries, such as Jingyi Group, Risun, FAW Group, FAWDE, Feilong Auto(FLACC), Kesen, Unicent and more. We can put your RC car in extreme.
Features for the DuroMax XP11500EH Generator Plenty of Power With 11,500 starting watts and 9,000 running watts, this unit can handle heavy loads, from lights and a refrigerator to a home air conditioner and high amperage power tools. Dual Fuel Technology This generator runs on gasoline or propane, giving you the freedom and flexibility of fuel choice. Powerful Engine â?? The DuroMax 457cc OHV engine is a workhorse that provides plenty of power to handle multiple jobs, from powering high voltage appliances to heavy duty power tools. Low Oil Shutoff â?? Protects your investment by automatically shutting the generator off when it senses that the oil is low. Fully Featured Power Panel â?? The power panel includes a wide selection of outlets for maximum compatibility in your applications including: 2 120V household GFCI outlets, 1 120V 30A twist lock outlet, 1 240V 30A outlet, and one 240V 50A outlet. The panel also includes a digital voltmeter. Complies with Emissions Standards â?? All DuroMax generators are both approved by the EPA (Environmental Protection Agency) and CARB (California Air Resources Board) and follow strict guidelines to ensure our generators are as environmentally friendly as possible. Included Oil Funnel Spark Plug Wrench Tool Set Wheel & Handle Kit Propane Regulator Ownerâ??s Manual Specifications (POWER) GASOLINE Peak Watts: 11,500 Running Watts: 9,000 Peak Amps @ 120V: 95.83 Running Amps @ 120V: 75.00 Peak Amps @ 240V: 47.92 Running Amps @ 240V: 37.50 PROPANE Peak Watts: 10,925 Running Watts: 8,550 Peak Amps @ 120V: 91.04 Running Amps @ 120V: 71.25 Peak Amps @ 240V: 45.52 Running Amps @ 240V: 35.63 PRODUCT SPECIFICATIONS Amperage: 75.00A / 37.50A Voltage: 120V / 240VAC Frequency: 60 Hz Engine Size: 457 cc Engine Type: 4-Cycle Air-Cooled Spark-Ignition Engine Speed: 3600 rpm Fuel Type: Gasoline / Propane Fuel Tank Capacity (Gasoline): 8.3 gal Suggested Tank Size (Propane): 40 lbs. Runtime (Gasoline) at 50% Load: 8 hrs. Runtime (Propane) at 50% Load: 6 hrs. Start Type: Electric / Recoil Volume Level: 72 dB EPA Certified: Yes CARB Certified: Yes Product Dimensions: 29" L x 30" W x 26" H Product Weight: 224 lbs.
Features for the DuroMax XP10000HX Generator Digital Command Center: All-new control center with a digital multimeter, push-button start, and a front-facing fuel interface allowing you to change your fuel type in seconds! The digital multimeter displays voltage, frequency, total hours run, and hours until the recommended maintenance. Duel Fuel: This generator runs on gasoline or propane, giving you the freedom and flexibility of fuel choice. Why Dual Fuel? Learn more about Dual Fuel technology Equipped with Co Alert: Equipped with DuroMax CO Alert technology that will automatically shut down the generator if an unsafe level of carbon monoxide is detected. Built using a powerful 439cc OHV DuroMax engine and features ALL COPPER WINDINGS designed to make your generator last for years. Powerful: The fully loaded power panel includes four 120V GFCI household outlets, one 120V 30AMP outlet, one 120/240V 30AMP twist-lock outlet, and a heavy-duty 120/240V 50AMP outlet making it transfer switch ready! Onboard the XP10000HX are individual circuit breakers, idle control, and a low oil sensor. Included Oil Funnel Spark Plug Wrench Tool Set Wheel & Handle Kit Propane Regulator Ownerâ??s Manual Specifications (POWER) GASOLINE Peak Watts: 10,000 Running Watts: 8,000 Peak Amps @ 120V: 83.33 Running Amps @ 120V: 66.67 Peak Amps @ 240V: 41.67 Running Amps @ 240V: 33.33 PROPANE Peak Watts: 9,500 Running Watts: 7,600 Peak Amps @ 120V: 79.17 Running Amps @ 120V: 63.33 Peak Amps @ 240V: 39.58 Running Amps @ 240V: 31.67 PRODUCT SPECIFICATIONS Amperage: 66.67A / 33.33A Voltage: 120V / 240VAC & 12VDC Frequency: 60 Hz Engine Size: 439 cc Engine Type: 4-Cycle Air-Cooled Spark-Ignition Engine Speed: 3600 rpm Fuel Type: Gasoline / Propane Fuel Tank Capacity (Gasoline): 8.2 gal. Suggested Tank Size (Propane): 40 lbs. Runtime (Gasoline) at 50% Load: 10.4 hrs. Runtime (Propane) at 50% Load: 8.6 hrs. Start Type: Electric / Recoil Volume Level: 72 dB EPA Certified: Yes CARB Certified: Yes Product Dimensions: 29" L x 30" W x 26" H Product Weight: 228 lbs.
Product Description Crafted for home baristas with tighter budgets and kitchen space, the ECM Classika II PID is a high performance semi-automatic espresso machine for those who demand quality without the restriction of cost. The result is a machine that utilizes many of the same commercial grade components ECM relies on for their prosumer models but at a more modest price point. Externally, the machine boldly reinforces the fact that no corners were cut with its polished stainless steel housing and custom machined E61 group head. On the top of the machine, the large capacity railed cup tray doubles as a passively heated cup warming surface and can be removed for access to the water reservoir. Removing the tray also allows access to the pump pressure adjustment screw. As you make adjustments, you can monitor your changes can be with the pump pressure gauge mounted on the front of the machine. Beneath the pressure gauge, brew temperature can be monitored and adjusted with the PID temperature controller. The Classika brews with .5 liter stainless steel boiler and a high-performance vibration pump. Like all ECM espresso machines, the internal plumbing avoids using teflon or other plastics in favor copper tubing with brass fittings. The water reservoir holds 3 liters and is fitted with a sensor that shuts off the machine off at low volumes to prevent the boiler from running dry. An advantage of brewing on a PID machine is that you can set the temperature to match your exact parameters. This becomes important when trying to extract specific notes and flavors from certain coffees. The vaunted E61 group head performs a vital function in helping to maintain these temperature conditions thanks to its thermosyphon system. Hot water and steam are dispensed through a shared wand located on the left side of the machine. Whether you dispense steam or hot water is controlled by a steam switch that raises the temperature in the boiler when flipped on.The Classika froths using a commercial style, two-hole steam tip ideal for crafting lattes, cappuccinos, and other milk drinks.Compact and capable, the ECM Classika II PID has the features you want and quality that you can depend on. Dimensions (with portafilter): 9.84" W x 21.85" D x 15.47" H Weight: 40.78lbs 3 Liter Monitored Reservoir The water reservoir holds an ample 3 liters of water and is fitted with a sensor that shuts off the machine at low volume to keep the machine from running dry. Durable Stainless Steel Construction The Classika II PID is housed in polished stainless steel that is both tough as nails and easy on the eyes. ECM wasn't content with simply welding the drip tray onto the machine, it's actually part of the frame for enhanced durability and build quality.
Liquid nitrogen supply tank is a cryogenic container made of stainless steel, mainly used for liquid nitrogen transfer and replenishment; The container itself has a pressure boosting system, which supplies liquid nitrogen to other containers by controlling valves. It is usually used in conjunction with experimental instruments, electronic equipment and other devices. It is characterized by being equipped with double safety automatic control valves to provide double safety protection measures; it can be continuously pressurized and has the uninterrupted nature of continuous liquid discharge; it is designed with 304 stainless steel inner and outer tanks + vacuum insulation structure, and has been rigorously tested at low temperatures; it is installed with Mobile casters with high load-bearing capacity make movement quick and convenient. Correct use steps of liquid nitrogen supply tank: 1.Add liquid Input liquid from the liquid inlet valve. When filling the tank, you must first open the vent valve, connect the metal hose for infusion to the liquid inlet valve, open the liquid inlet valve, and then add liquid nitrogen to the tank. The filling is completed. Finally, close the liquid inlet valve. 2. Liquid level indication Liquid nitrogen supply tanks are generally equipped with a buoyancy level gauge. By observing the yellow indicator ring on the transparent display, you can grasp changes in the liquid level in the tank. 3.Storage When storing liquid nitrogen, the liquid inlet valve and booster valve should be closed, and the vent valve should be opened; 4.Transportation When the liquid nitrogen supply tank needs to be transported, the opening and closing states of each valve should remain the same as during storage, and the bottom casters should be fixed to prevent losses caused by road bumps. 5.Infusion When you need to add fluid to other containers, pay attention to the following steps: (1) Close the vent valve; (2) Open the booster valve; (3) Observe the pressure gauge; (4) When the pressure rises to 0.05MPa, open the drain valve to replenish liquid nitrogen; Liquid nitrogen supply tank is an important cryogenic equipment, which is widely used and frequently used. Correct use is more conducive to the smooth progress of experimental work.
ER-TS-22800 Feature: 1. Accuracy: 0.005 , resolution: 0.0008 2. Measurement range: ± 30 3. Volume (94*74*64mm) (customizable). Introduction ER-TS-22800 protocol is a wireless tilt sensor with ultra-low power consumption, small size and high accuracy, for users without power supply conditions or real-time dynamic measurement of object attitude Angle industry applications. Powered by lithium battery, based on the Internet of Things technology Bluetooth, Zigbee (optional) wireless transmission technology, the use of industrial-grade MCU, triple-proof PCB boards, imported cables, wide-temperature metal shell and other measures to improve the productâ??s industrial level, good long-term stability and zero drift small, Low power sleep mode can be automatically entered, thus getting rid of the dependence on the use environment. Compact product structure, precision design, for temperature and linearity compensation again, Integrated with short circuit, instant high pressure, polarity, surge and other comprehensive protection functions, simple and easy to use, and wireless digital signal transmission mode eliminates the tedious wiring brought by long cable transmission, noise interference; Industrial-grade design has extremely high measurement accuracy and anti-interference ability, wireless sensor nodes can form huge wireless networks, supporting thousands of monitoring points for simultaneous inclination monitoring, supporting the professional computer software, no need for field survey, real-time data measurement and record the state of the measured object; Suitable for the industrial site, old dilapidated houses, ancient buildings, civil engineering, various tower tilt deformation remote real-time monitoring and analysis of the needs of the safety monitoring system. Product property Biaxial monitoring (uniaxial optional) Measurement Range: ± 30 Accuracy: 0.005 , resolution: 0.0008 Volume (94*74*64mm) (customizable) Ultra-low power consumption Built-in rechargeable lithium battery power supply Wide temperature work:-40~+ 85 IP67, protection level Product application Billboard monitoring Bridge construction Cloud platform levelling Ship attitude measurement High Speed Rail Roadbed Tunnel Monitoring Satellite solar antenna positioning Medical equipment Various engineering machinery angle control
This is a state-of-the-art sewing machine designed to streamline and automate the production of intricate patterns and designs. With its advanced computerized technology, this machine offers precise stitching and high-speed operation, making it an ideal choice for various industries such as apparel, automotive, upholstery, and home textiles. Computerized Operation: The machine is equipped with advanced computerized technology that allows for precise and automated stitching of complex patterns. Users can create and input custom designs through the machine's user-friendly interface, eliminating the need for manual pattern marking and reducing production time. Large Sewing Area: With a spacious sewing area of 300*200mm, this machine offers ample space to sew large-scale patterns and designs. The generous sewing area enables the creation of intricate and detailed designs on a wide range of fabrics and materials. High-Speed Performance: The Automatic Computerized Pattern Sewing Machine is capable of high-speed stitching, significantly increasing productivity and efficiency. The machine's precise motor control and optimized thread tension system ensure consistent stitch quality, even at high sewing speeds. Versatile Stitching Options: This machine offers a wide range of stitching options, including straight stitching, zigzag stitching, decorative stitching, and more. With the ability to customize stitch length, width, and density, users can achieve a variety of design effects and meet diverse application requirements. Model BS-2010 BS-3020 BS-6040 Sewing type SINGLE NEEDLE LOCKSTITCH Max sewing speed 2,800 RPM 2,800 RPM 2,800 RPM Stitching area 200x100 mm 300x200 mm 600x400 mm Cloth feeding device INTERMITTENT FEEDING (DRIVEN BY PULSE MOTOR) Needle gauge 0.05 -12.7mm Can be saved by code 50000 STITCHES/ SEWING PATTERN Highest sewing stitched for each pattern 20000(A PATTERN) Storage SD CARD BUILT-IN MEMORY:2GB, 900 KINDS Clamp drive PNEUMATIC Clamp height Max 35 mm Clamp lowest ONE-PIECE PRESSURE FOOT Pressure foot lift up 22 mm Intermittent pressure foot 0.2-4.5 mm OR 4.5 mm (FACTORY SETTINGS:3 mm) Shuttle (hook) DOUBLE HOOK(STANDARD) Thread wiper device STANDARD EQUIPMENT Trimmer device STANDARD EQUIPMENT Date memory FLASH MEMORY(CAN SAVE WITH SD CARD) 3 INCH DISK 2HD/1.44BM.2DD,USB INTERFACE No. of user programs 50 Loop program number 9 Motor SERVO MOTOR 750W Weight HEAD: 160 kg, OPERATING PANEL: 0.6 kg, CONTROL BOX: 16.2 kg Power SINGLE PHASE 220V 3-PHASE 200V/380V/400V 500VA Air pressure 0.5 Mpa 1.81/min
Introduction ER-TS-32600-Modbus High Performance Wireless Transmission Tilt Sensor is a wireless inclination sensor with ultra-low power consumption, small size and high performance, which is aimed at the industrial application of users without power supply or real-time dynamic measurement of object attitude angle. Powered by lithium battery, based on Internet of things technology Bluetooth and ZigBee (optional) wireless transmission technology, all internal circuits have been optimized and designed, and various measures such as industrial MCU, three proof PCB board, imported cable, wide temperature metal shell are adopted to improve the industrial level of the product. With good long-term stability and small zero drift, it can automatically enter the low-power sleep mode, so as to get rid of the dependence on the use environment. The product has compact structure, precise design, recompensation for temperature and linearity, and integrated comprehensive protection functions such as short circuit, instantaneous high voltage, polarity, surge, etc. it is simple and convenient to use. The wireless digital signal transmission method eliminates the cumbersome wiring and noise interference caused by long cable transmission; The industrial design has extremely high measurement accuracy and anti-interference ability. The wireless sensor nodes can form a huge wireless network, support thousands of measuring points to monitor the inclination at the same time, and support professional computer software. Without field survey, it can measure and record the state of the measured object in real time; The safety monitoring system is suitable for remote real-time monitoring and analysis of industrial sites, dilapidated houses, ancient buildings, civil engineering, tilt deformation of various towers and other needs. Features Dual axis monitoring (single axis optional) Range: double axis �±90�°, single axis 180�° (360�° optional) Accuracy: 0.01�°, resolution: 0.002�° Volume (94*74*64mm) (customizable) Ultra low power consumption Built in rechargeable lithium battery for power supply Wide temperature operation -40~+85â?? IP67 protection grade Applications Billboard monitoring Bridge construction PTZ levelling Ship navigation attitude measurement High speed railway subgrade tunnel monitoring Satellite solar antenna positioning Medical equipment Angle control of various construction machinery
ER-TS-32600-Modbus Features: 1. Dual axis monitoring (single axis optional); 2. Full range accuracy 0.01°, resolution 0.002°; 3. Volume (94*74*64mm) (customizable). Introduction ER-TS-32600-Modbus High Performance Wireless Transmission Tilt Sensor is a wireless inclination sensor with ultra-low power consumption, small size and high performance, which is aimed at the industrial application of users without power supply or real-time dynamic measurement of object attitude angle. Powered by lithium battery, based on Internet of things technology Bluetooth and ZigBee (optional) wireless transmission technology, all internal circuits have been optimized and designed, and various measures such as industrial MCU, three proof PCB board, imported cable, wide temperature metal shell are adopted to improve the industrial level of the product. With good long-term stability and small zero drift, it can automatically enter the low-power sleep mode, so as to get rid of the dependence on the use environment. The product has compact structure, precise design, recompensation for temperature and linearity, and integrated comprehensive protection functions such as short circuit, instantaneous high voltage, polarity, surge, etc. it is simple and convenient to use. The wireless digital signal transmission method eliminates the cumbersome wiring and noise interference caused by long cable transmission; The industrial design has extremely high measurement accuracy and anti-interference ability. The wireless sensor nodes can form a huge wireless network, support thousands of measuring points to monitor the inclination at the same time, and support professional computer software. Without field survey, it can measure and record the state of the measured object in real time; The safety monitoring system is suitable for remote real-time monitoring and analysis of industrial sites, dilapidated houses, ancient buildings, civil engineering, tilt deformation of various towers and other needs. Features Dual axis monitoring (single axis optional) Range: double axis �±90�°, single axis 180�° (360�° optional) Accuracy: 0.01�°, resolution: 0.002�° Volume (94*74*64mm) (customizable) Ultra low power consumption Built in rechargeable lithium battery for power supply Wide temperature operation -40~+85â?? IP67 protection grade Applications Billboard monitoring Bridge construction PTZ levelling Ship navigation attitude measurement High speed railway subgrade tunnel monitoring Satellite solar antenna positioning Medical equipment Angle control of various construction machinery
Liquid nitrogen tanks can be divided into two types according to cell storage modes, gas phase and liquid phase storage modes; In the gas phase, samples are stored in volatile nitrogen; in the liquid phase, samples are directly immersed in liquid nitrogen for low-temperature preservation; However, due to different capacities, not all cells can be stored in gas-phase storage mode. Only cells with more than 10,000 cells can use gas-phase liquid nitrogen tanks. If there are more than a thousand cells and need to be preserved in the gas phase, how can this be achieved? You can choose the cryobank series liquid nitrogen tank, which is specially designed for a small amount of cells that require gas phase storage. It has the storage mode of the YDD series and the conventional capacity of the YDS series. It can be regarded as a mini version of the YDD stem cell liquid nitrogen tank or the YDS series liquid nitrogen tank. An upgraded version of the nitrogen tank. The following are the features of cryobank series liquid nitrogen tanks: 1. 4 models, namely 65 liters, 95 liters, 145 liters and 175 liters, supporting the storage of 2400, 3600, 4800 and 6000 2ml cryovials; 2. Each model is equipped with 6 square buckets for storing freezing boxes and freezing tubes; 3. There are two storage modes: gas phase and liquid phase. When storing in gas phase, the temperature at the top of the tank can reach below -190�°C; therefore, it can be called a small gas-liquid-phase liquid nitrogen tank, a small gas-phase tank, and a small low-temperature biobank; 4. Comes with a liquid level sensor that can monitor the liquid level in the tank in real time, which is safe and reliable; 5. Intelligent control display system, real-time monitoring of internal temperature and liquid nitrogen consumption; 6. Vacuum insulation structure and hot gas bypass design ensure uniform and stable internal temperature; 7. It is adapted to the self-pressurizing liquid nitrogen tank and has automatic replenishing function, which is convenient and fast, saving manpower; 8. Supports remote alarm (voice/SMS/WeChat, etc.), and has intelligent local and cloud data backup and export functions. In addition, the small gas-liquid phase liquid nitrogen tank also has the same one-click defogging as the YDD biological sample library, which helps users quickly locate cells and reduces the loss of liquid nitrogen caused by opening the lid. If you have any needs, please contact KGSQ liquid nitrogen tank:
Product Description Technically, the La Marzocco GS/3 is a commercial machine, ready for use in a coffee shop or kiosk but we are also selling it for the home. With dual stainless steel boilers for simultaneous brewing and steaming, a 118 oz water reservoir, separate stainless steel hot water and steam wands, a multifunction backlit keypad and easy to read digital display, programmable water volumes, adjustable temperature control and more, we figured that this machine was too good to hide from a retail audience. If youâ??re ready to blur the line between â??consumerâ?? and â??professional,â?? or if you think the line never really existed in the first place, then youâ??re ready to take a closer look at the respected and reputable La Marzocco GS/3. This machine has a 13 month warranty. Features & Benefits: Coffee Design To the left of the brew group are two pressure gauges â?? the far left pressure gauge shows the pressure in the brew boiler, and the gauge closer to the brew group shows the pressure in the steam boiler. Above these gauges is the steam wand, and below them is the steam activation lever. To the right of the brew group is the digital display with clock and below the display is the keypad. This is also where you find the hot water dispenser and hot water lever. They keypad has icons, so you can remember which button does which. From left to right, they stand for espresso, double espresso, coffee, double coffee, programming and tea. When in programming mode, the espresso and double espresso buttons stand for a down arrow and an up arrow, respectively. The coffee button is used to access certain menus, the double coffee button has no programming function, and the tea button is used to turn the GS/3 on and off. Brewing The machine is heated to proper brewing temperature when the keypad buttons are backlit. Before brewing, itâ??s a good idea to run some hot water through the portafilter. This warms the portafilter to brewing temperature, so your espresso is brewed at a consistent temperature. Add grounds to the portafilter, insert the portafilter into the group head, and press the button corresponding to your preferred drink â?? espresso, double espresso, coffee, or double coffee. The machine will automatically dispense a set volume of water through the grounds. When brewing, the brew boiler pressure gauge should read about 9 bars.
ER-TS-12200-Modbus Features: 1. Dual axis monitoring (single axis optional); 2. Full range accuracy 0.001 resolution 0.0005 3. Volume (94*74*64mm) (customizable). Introduction ER-TS-12200-Modbus High Precision Wireless Transmission Tilt Sensor is a wireless inclination sensor with ultra-low power consumption, small size and high performance, which is aimed at the industrial application of users without power supply or real-time dynamic measurement of object attitude angle. Powered by lithium battery, based on Internet of things technology Bluetooth and ZigBee (optional) wireless transmission technology, all internal circuits have been optimized and designed, and various measures such as industrial MCU, three proof PCB board, imported cable, wide temperature metal shell are adopted to improve the industrial level of the product. With good long-term stability and small zero drift, it can automatically enter the low-power sleep mode, so as to get rid of the dependence on the use environment. The product has compact structure, precise design, recompensation for temperature and linearity, and integrated comprehensive protection functions such as short circuit, instantaneous high voltage, polarity, surge, etc. it is simple and convenient to use. The wireless digital signal transmission method eliminates the cumbersome wiring and noise interference caused by long cable transmission; The industrial design has extremely high measurement accuracy and anti-interference ability. The wireless sensor nodes can form a huge wireless network, support thousands of measuring points to monitor the inclination at the same time, and support professional computer software. Without field survey, it can measure and record the state of the measured object in real time; The safety monitoring system is suitable for remote real-time monitoring and analysis of industrial sites, dilapidated houses, ancient buildings, civil engineering, tilt deformation of various towers and other needs. Features Dual axis monitoring (single axis optional) Range: ±30 Accuracy: 0.001 , resolution: 0.0005 Volume (94*74*64mm) (customizable) Ultra low power consumption Powered by built-in rechargeable lithium battery Wide temperature operation -40~+85 IP67 protection grade Applications Bridge construction PTZ levelling Ship navigation attitude measurement High railway foundation tunnel monitoring Satellite solar antenna positioning Medical equipment Angle control of various construction machinery
For laboratories, the cell samples stored in liquid nitrogen tanks are relatively precious. If liquid nitrogen is not added in time, the cell samples will lose their activity due to insufficient liquid nitrogen, causing unnecessary losses. To avoid this kind of situation, we can choose a liquid nitrogen tank alarm to help us check how much liquid nitrogen is left in the tank, and remind us to replenish it in time when the liquid nitrogen is insufficient. What is a liquid nitrogen tank alarm? The liquid nitrogen tank alarm is specially developed and produced for measuring the liquid nitrogen balance and temperature in the liquid nitrogen tank. It uses imported high-precision sensor probes and is powered by dual 18650 large-capacity batteries. The USB port can be connected to an external power supply for power supply and charging. It has an ultra-low power consumption design. A single battery can last for 4 months (real-time data is reported once every 10 minutes). With accurate measurement and excellent performance, it is widely used in liquid nitrogen cryogenic equipment, pharmaceutical warehouses, cold chain transportation, laboratories and other places. working principle: It uses imported high-precision sensor probes to measure the temperature of liquid nitrogen and output information to the terminal; Liquid nitrogen tank alarm features: 1. Imported high-precision probe, with high measurement accuracy, large range and good consistency. 2. With a cloud monitoring platform, there is no need to monitor hosts, collectors and other equipment. 3. Easy to use, you can use the mobile APP or log in to the web page to view the data. 4. Support SMS alarm and email alarm. 5. Realize cloud monitoring of high temperature, low temperature, high humidity, low humidity, offline, low battery, power outage, etc. Note: The temperature probe should be fixed in the appropriate position according to actual needs. 6. Low power consumption design, using a large-capacity battery, rechargeable; the battery is anti-reverse connection, and the phone will not burn if the battery is installed backwards. 7. Offline recording function, normal monitoring and recording of data when the network is disconnected, and automatic reporting to the cloud platform after the network is connected. 8. Desktop wall-mounted magnetic structure design, easy to install; has super stability and anti-interference ability.
Introduction ER-TS-12200-Modbus High Precision Wireless Transmission Tilt Sensor is a wireless inclination sensor with ultra-low power consumption, small size and high performance, which is aimed at the industrial application of users without power supply or real-time dynamic measurement of object attitude angle. Powered by lithium battery, based on Internet of things technology Bluetooth and ZigBee (optional) wireless transmission technology, all internal circuits have been optimized and designed, and various measures such as industrial MCU, three proof PCB board, imported cable, wide temperature metal shell are adopted to improve the industrial level of the product. With good long-term stability and small zero drift, it can automatically enter the low-power sleep mode, so as to get rid of the dependence on the use environment. The product has compact structure, precise design, recompensation for temperature and linearity, and integrated comprehensive protection functions such as short circuit, instantaneous high voltage, polarity, surge, etc. it is simple and convenient to use. The wireless digital signal transmission method eliminates the cumbersome wiring and noise interference caused by long cable transmission; The industrial design has extremely high measurement accuracy and anti-interference ability. The wireless sensor nodes can form a huge wireless network, support thousands of measuring points to monitor the inclination at the same time, and support professional computer software. Without field survey, it can measure and record the state of the measured object in real time; The safety monitoring system is suitable for remote real-time monitoring and analysis of industrial sites, dilapidated houses, ancient buildings, civil engineering, tilt deformation of various towers and other needs. Features Dual axis monitoring (single axis optional) Range: �±30�° Accuracy: 0.001�°, resolution: 0.0005�° Volume (94*74*64mm) (customizable) Ultra low power consumption Powered by built-in rechargeable lithium battery Wide temperature operation -40~+85â?? IP67 protection grade Applications Bridge construction PTZ levelling Ship navigation attitude measurement High railway foundation tunnel monitoring Satellite solar antenna positioning Medical equipment Angle control of various construction machinery
ER-TS-32600-Modbus Features: 1. Dual axis monitoring (single axis optional); 2. Full range accuracy 0.01, resolution 0.002; 3. Volume (94*74*64mm) (customizable). Introduction ER-TS-32600-Modbus High Performance Wireless Transmission Tilt Sensor is a wireless inclination sensor with ultra-low power consumption, small size and high performance, which is aimed at the industrial application of users without power supply or real-time dynamic measurement of object attitude angle. Powered by lithium battery, based on Internet of things technology Bluetooth and ZigBee (optional) wireless transmission technology, all internal circuits have been optimized and designed, and various measures such as industrial MCU, three proof PCB board, imported cable, wide temperature metal shell are adopted to improve the industrial level of the product. With good long-term stability and small zero drift, it can automatically enter the low-power sleep mode, so as to get rid of the dependence on the use environment. The product has compact structure, precise design, recompensation for temperature and linearity, and integrated comprehensive protection functions such as short circuit, instantaneous high voltage, polarity, surge, etc. it is simple and convenient to use. The wireless digital signal transmission method eliminates the cumbersome wiring and noise interference caused by long cable transmission; The industrial design has extremely high measurement accuracy and anti-interference ability. The wireless sensor nodes can form a huge wireless network, support thousands of measuring points to monitor the inclination at the same time, and support professional computer software. Without field survey, it can measure and record the state of the measured object in real time; The safety monitoring system is suitable for remote real-time monitoring and analysis of industrial sites, dilapidated houses, ancient buildings, civil engineering, tilt deformation of various towers and other needs. Features Dual axis monitoring (single axis optional) Range: double axis �±90�°, single axis 180�° (360�° optional) Accuracy: 0.01�°, resolution: 0.002�° Volume (94*74*64mm) (customizable) Ultra low power consumption Built in rechargeable lithium battery for power supply Wide temperature operation -40~+85â?? IP67 protection grade Applications Billboard monitoring Bridge construction PTZ levelling Ship navigation attitude measurement High speed railway subgrade tunnel monitoring Satellite solar antenna positioning Medical equipment Angle control of various construction machinery
ER-TS-12200-Modbus Features: 1. Dual axis monitoring (single axis optional); 2. Full range accuracy 0.001, resolution 0.0005; 3. Volume (94*74*64mm) (customizable). Introduction ER-TS-12200-Modbus High Precision Wireless Transmission Tilt Sensor is a wireless inclination sensor with ultra-low power consumption, small size and high performance, which is aimed at the industrial application of users without power supply or real-time dynamic measurement of object attitude angle. Powered by lithium battery, based on Internet of things technology Bluetooth and ZigBee (optional) wireless transmission technology, all internal circuits have been optimized and designed, and various measures such as industrial MCU, three proof PCB board, imported cable, wide temperature metal shell are adopted to improve the industrial level of the product. With good long-term stability and small zero drift, it can automatically enter the low-power sleep mode, so as to get rid of the dependence on the use environment. The product has compact structure, precise design, recompensation for temperature and linearity, and integrated comprehensive protection functions such as short circuit, instantaneous high voltage, polarity, surge, etc. it is simple and convenient to use. The wireless digital signal transmission method eliminates the cumbersome wiring and noise interference caused by long cable transmission; The industrial design has extremely high measurement accuracy and anti-interference ability. The wireless sensor nodes can form a huge wireless network, support thousands of measuring points to monitor the inclination at the same time, and support professional computer software. Without field survey, it can measure and record the state of the measured object in real time; The safety monitoring system is suitable for remote real-time monitoring and analysis of industrial sites, dilapidated houses, ancient buildings, civil engineering, tilt deformation of various towers and other needs. Features Dual axis monitoring (single axis optional) Range: ±30 Accuracy: 0.001 , resolution: 0.0005 Volume (94*74*64mm) (customizable) Ultra low power consumption Powered by built-in rechargeable lithium battery Wide temperature operation -40~+85 IP67 protection grade Applications Bridge construction PTZ leveling Ship navigation attitude measurement High Railway Foundation Tunnel Monitoring Satellite solar antenna positioning Medical equipment Angle control of various construction machinery