Introduction
ER-TS-32600-Modbus High Performance Wireless Transmission Tilt Sensor is a wireless inclination sensor with ultra-low power consumption, small size and high performance, which is aimed at the industrial application of users without power supply or real-time dynamic measurement of object attitude angle. Powered by lithium battery, based on Internet of things technology Bluetooth and ZigBee (optional) wireless transmission technology, all internal circuits have been optimized and designed, and various measures such as industrial MCU, three proof PCB board, imported cable, wide temperature metal shell are adopted to improve the industrial level of the product. With good long-term stability and small zero drift, it can automatically enter the low-power sleep mode, so as to get rid of the dependence on the use environment.
The product has compact structure, precise design, recompensation for temperature and linearity, and integrated comprehensive protection functions such as short circuit, instantaneous high voltage, polarity, surge, etc. it is simple and convenient to use. The wireless digital signal transmission method eliminates the cumbersome wiring and noise interference caused by long cable transmission; The industrial design has extremely high measurement accuracy and anti-interference ability. The wireless sensor nodes can form a huge wireless network, support thousands of measuring points to monitor the inclination at the same time, and support professional computer software. Without field survey, it can measure and record the state of the measured object in real time; The safety monitoring system is suitable for remote real-time monitoring and analysis of industrial sites, dilapidated houses, ancient buildings, civil engineering, tilt deformation of various towers and other needs.
Features
Dual axis monitoring (single axis optional)
Range: double axis �±90�°, single axis 180�° (360�° optional)
Accuracy: 0.01�°, resolution: 0.002�°
Volume (94*74*64mm) (customizable)
Ultra low power consumption
Built in rechargeable lithium battery for power supply
Wide temperature operation -40~+85â??
IP67 protection grade
Applications
Billboard monitoring
Bridge construction
PTZ levelling
Ship navigation attitude measurement
High speed railway subgrade tunnel monitoring
Satellite solar antenna positioning
Medical equipment
Angle control of various construction machinery
ER-TS-32600-Modbus Features: 1. Dual axis monitoring (single axis optional); 2. Full range accuracy 0.01°, resolution 0.002°; 3. Volume (94*74*64mm) (customizable). Introduction ER-TS-32600-Modbus High Performance Wireless Transmission Tilt Sensor is a wireless inclination sensor with ultra-low power consumption, small size and high performance, which is aimed at the industrial application of users without power supply or real-time dynamic measurement of object attitude angle. Powered by lithium battery, based on Internet of things technology Bluetooth and ZigBee (optional) wireless transmission technology, all internal circuits have been optimized and designed, and various measures such as industrial MCU, three proof PCB board, imported cable, wide temperature metal shell are adopted to improve the industrial level of the product. With good long-term stability and small zero drift, it can automatically enter the low-power sleep mode, so as to get rid of the dependence on the use environment. The product has compact structure, precise design, recompensation for temperature and linearity, and integrated comprehensive protection functions such as short circuit, instantaneous high voltage, polarity, surge, etc. it is simple and convenient to use. The wireless digital signal transmission method eliminates the cumbersome wiring and noise interference caused by long cable transmission; The industrial design has extremely high measurement accuracy and anti-interference ability. The wireless sensor nodes can form a huge wireless network, support thousands of measuring points to monitor the inclination at the same time, and support professional computer software. Without field survey, it can measure and record the state of the measured object in real time; The safety monitoring system is suitable for remote real-time monitoring and analysis of industrial sites, dilapidated houses, ancient buildings, civil engineering, tilt deformation of various towers and other needs. Features Dual axis monitoring (single axis optional) Range: double axis �±90�°, single axis 180�° (360�° optional) Accuracy: 0.01�°, resolution: 0.002�° Volume (94*74*64mm) (customizable) Ultra low power consumption Built in rechargeable lithium battery for power supply Wide temperature operation -40~+85â?? IP67 protection grade Applications Billboard monitoring Bridge construction PTZ levelling Ship navigation attitude measurement High speed railway subgrade tunnel monitoring Satellite solar antenna positioning Medical equipment Angle control of various construction machinery
Introduction ER-TS-52400 protocol is an ultra-low power, small size, and high performance wireless tilt sensor for industrial applications where users have no power supply or real-time dynamic measurement of object attitude angle. Based on the Internet of things technology Bluetooth, Zigbee (optional) wireless transmission technology, all internal circuits are optimized design, good long-term stability and small zero drift, can automatically enter the low-power sleep mode, so as to get rid of the dependence on the use of the environment; Industrial equipment wireless transmission distance: Bluetooth
ER-TS-42500 Features: 1. Accuracy: 0.1, resolution: 0.01; 2. Wide temperature work: -40~+ 85 3. Biaxial monitoring (uniaxial optional). Introduction The ER-TS-42500 protocol is an ultra-low power, small volume, and high performance wireless tilt sensor for industrial applications where users have no power supply or real-time dynamic measurement of object attitude Angle. Based on the Internet of Things technology Bluetooth, Zigbee (optional) wireless transmission technology, all internal circuits are optimized design, good long-term stability and small zero drift, can automatically enter low-power sleep mode, from the use of the environment to get rid of dependence; Industrial equipment wireless transmission distance: Bluetooth
ER-TS-32600-Modbus Features: 1. Dual axis monitoring (single axis optional); 2. Full range accuracy 0.01, resolution 0.002; 3. Volume (94*74*64mm) (customizable). Introduction ER-TS-32600-Modbus High Performance Wireless Transmission Tilt Sensor is a wireless inclination sensor with ultra-low power consumption, small size and high performance, which is aimed at the industrial application of users without power supply or real-time dynamic measurement of object attitude angle. Powered by lithium battery, based on Internet of things technology Bluetooth and ZigBee (optional) wireless transmission technology, all internal circuits have been optimized and designed, and various measures such as industrial MCU, three proof PCB board, imported cable, wide temperature metal shell are adopted to improve the industrial level of the product. With good long-term stability and small zero drift, it can automatically enter the low-power sleep mode, so as to get rid of the dependence on the use environment. The product has compact structure, precise design, recompensation for temperature and linearity, and integrated comprehensive protection functions such as short circuit, instantaneous high voltage, polarity, surge, etc. it is simple and convenient to use. The wireless digital signal transmission method eliminates the cumbersome wiring and noise interference caused by long cable transmission; The industrial design has extremely high measurement accuracy and anti-interference ability. The wireless sensor nodes can form a huge wireless network, support thousands of measuring points to monitor the inclination at the same time, and support professional computer software. Without field survey, it can measure and record the state of the measured object in real time; The safety monitoring system is suitable for remote real-time monitoring and analysis of industrial sites, dilapidated houses, ancient buildings, civil engineering, tilt deformation of various towers and other needs. Features Dual axis monitoring (single axis optional) Range: double axis �±90�°, single axis 180�° (360�° optional) Accuracy: 0.01�°, resolution: 0.002�° Volume (94*74*64mm) (customizable) Ultra low power consumption Built in rechargeable lithium battery for power supply Wide temperature operation -40~+85â?? IP67 protection grade Applications Billboard monitoring Bridge construction PTZ levelling Ship navigation attitude measurement High speed railway subgrade tunnel monitoring Satellite solar antenna positioning Medical equipment Angle control of various construction machinery
MB7066 XL-MaxSonar-WRL1 High Performance Ultrasonic Precision Rangefinder MB7066 XL-MaxSonar-WRL1 Ultrasonic Rangefinder Product Description The XL-MaxSonar-WRL1 is our longest range (10m) outdoor sensor. The weather resistant XL-MaxSonar-WR is a rugged ultrasonic sensor component module. This outdoor sensor provides very short to long distance detection and ranging in a compact, robust PVC housing. The ultrasonic sensor meets the IP67 water intrusion standard and matches standard electrical 3/4-inch PVC pipe fittings. High output acoustic power combined with continuously variable gain, real-time background automatic calibration, realâ??time waveform signature analysis, and noise rejection algorithms results in virtually noise free distance readings. This holds true even in the presence of many of the various acoustic or electrical noise sources. The XL-MaxSonar-WR sensors are factory calibrated to match narrow sensor beam patterns and provide reliable long range detection zones. MB7066 XL-MaxSonar-WRL1 Ultrasonic Rangefinder Product Specifications * Resolution of 1 cm * 10Hz read rate * 42kHz Ultrasonic sensor measures distance to objects * RoHS Compliant * Read from all 3 select sensor outputs: Analog Voltage, Serial, Pulse Width * Operates from 3.0-5.5V * Low 3.4mA average current requirement * Small, light weight module * Designed for easy integration into your project or product * Operational Temperature from -40'C to +70'C (-40'F to +160'F) * Real-time automatic calibration (voltage, humidity, ambient noise) * Firmware filtering for better noise tolerance and clutter rejection * 200,000+ Hours Mean Time Between Failure * Weather Resistant (IP67), optional Chemical Resistant F-Option * Matches standard electrical 3/4-inch PVC pipe fittings for easy mounting (3/4â?³ National Pipe Thread Straight) * Our longest range outdoor, weather resistant, ultrasonic sensor * Maximum range of 1068 cm (450 inches) * Long range, narrow detection zone MB7066 XL-MaxSonar-WRL1 Ultrasonic Rangefinder Features and Benefits * Extended 10 meter range detection and outputs * High acoustic power output * Readings can occur up to every 100ms, 10-Hz rate * Triggered operation provides the range reading as desired * Fast measurement cycle * Quality narrow beam characteristics * Low cost, long range IP67 sensor MB7066 XL-MaxSonar-WRL1 Ultrasonic Rangefinder Applications and Uses * Robot ranging sensor * Autonomous navigation * Distance measuring * Long range object detection * Industrial sensor
MB7480 4-20HR-MaxSonar-WRI High Performance Ultrasonic Precision Rangefinder MB7480 4-20HR-MaxSonar-WRI Ultrasonic Rangefinder Product Description The weather resistant 4-20HR-MaxSonar-WR is a rugged, ultrasonic sensor component module that features the industry standard 4-20mA analog current interface. This outdoor sensor provides very short- to long- distance detection and ranging in a compact, robust PVC housing. This ultrasonic sensor meets the IP67 water intrusion standard and matches standard electrical 3/4-inch PVC pipe fittings. High-output, acoustic power, combined with continuously variable gain, realâ??time background automatic calibration, realâ??time waveform signature analysis, and noise rejection algorithms results in virtually noise free distance readings. This holds true even in the presence of many of the various acoustic or electrical noise sources. The 4-20HR-MaxSonar-WR sensors are factory calibrated to match narrow sensor beam patterns and provide reliable long-range detection zones. The MB7480 4-20HR-MaxSonar-WR sensor has an inverted 4-20mA signal where 20mA signifies that the sensor is reporting the minimum reported distance and 4mA signifies the maximum reported distance for the sensor. MB7360 is the non 4-20mA version of this sensor line. MB7389 is the most likely version of this sensor. Models with additional chemical resistance are available The F-Option (IP-68) design modification provides our weather resistant sensors with extra protection against corrosive chemical environments. Ask for the F-Option (IP-68) when ordering. MB7480 4-20HR-MaxSonar-WRI Ultrasonic Rangefinder Product Specifications * Resolution of ~1.6mm * Analog current output of 4-20mA * 7.5Hz read rate * 42kHz ultrasonic sensor measures distance to objects * RoHS compliant * Operates from 10V-32VDC * Operational temperature -40'C to +65'C (-40'F to +149'F) * Maximum Range of 5-meters (196 inches) MB7480 4-20HR-MaxSonar-WRI Ultrasonic Rangefinder Features & Benefits * Factory calibrated beam pattern * Functions well in high noise environments * Stable and highly reliable range readings * Excellent noise and clutter rejection * High acoustic sensitivity * Low current draw * High quality, low cost * Minimal sensor-to-sensor variability MB7480 4-20HR-MaxSonar-WRI Ultrasonic Rangefinder Applications & Uses * Automated process control systems * Weather station monitoring * Bin level measurement * Proximity zone detection * Environments with acoustic and electric noise * Height monitors * Auto sizing * Box dimensions * People detection * Robot ranging
ER-TS-32600-Modbus Features: 1. Dual axis monitoring (single axis optional); 2. Full range accuracy 0.01 resolution 0.002 3. Volume (94*74*64mm) (customizable). Introduction ER-TS-32600-Modbus High Performance Wireless Transmission Tilt Sensor is a wireless inclination sensor with ultra-low power consumption, small size and high performance, which is aimed at the industrial application of users without power supply or real-time dynamic measurement of object attitude angle. Powered by lithium battery, based on Internet of things technology Bluetooth and ZigBee (optional) wireless transmission technology, all internal circuits have been optimized and designed, and various measures such as industrial MCU, three proof PCB board, imported cable, wide temperature metal shell are adopted to improve the industrial level of the product. With good long-term stability and small zero drift, it can automatically enter the low-power sleep mode, so as to get rid of the dependence on the use environment. The product has compact structure, precise design, recompensation for temperature and linearity, and integrated comprehensive protection functions such as short circuit, instantaneous high voltage, polarity, surge, etc. it is simple and convenient to use. The wireless digital signal transmission method eliminates the cumbersome wiring and noise interference caused by long cable transmission; The industrial design has extremely high measurement accuracy and anti-interference ability. The wireless sensor nodes can form a huge wireless network, support thousands of measuring points to monitor the inclination at the same time, and support professional computer software. Without field survey, it can measure and record the state of the measured object in real time; The safety monitoring system is suitable for remote real-time monitoring and analysis of industrial sites, dilapidated houses, ancient buildings, civil engineering, tilt deformation of various towers and other needs. Features Dual axis monitoring (single axis optional) Range: double axis �±90�°, single axis 180�° (360�° optional) Accuracy: 0.01�°, resolution: 0.002�° Volume (94*74*64mm) (customizable) Ultra low power consumption Built in rechargeable lithium battery for power supply Wide temperature operation -40~+85 IP67 protection grade Applications Billboard monitoring Bridge construction PTZ leveling Ship navigation attitude measurement High speed railway subgrade tunnel monitoring Satellite solar antenna positioning Medical equipment Angle control of various construction machinery
ER-TS-12200-Modbus Features: 1. Dual axis monitoring (single axis optional); 2. Full range accuracy 0.001 , resolution 0.0005 ; 3. Volume (94*74*64mm) (customizable). Introduction ER-TS-12200-Modbus High Precision Wireless Transmission Tilt Sensor is a wireless inclination sensor with ultra-low power consumption, small size and high performance, which is aimed at the industrial application of users without power supply or real-time dynamic measurement of object attitude angle. Powered by lithium battery, based on Internet of things technology Bluetooth and ZigBee (optional) wireless transmission technology, all internal circuits have been optimized and designed, and various measures such as industrial MCU, three proof PCB board, imported cable, wide temperature metal shell are adopted to improve the industrial level of the product. With good long-term stability and small zero drift, it can automatically enter the low-power sleep mode, so as to get rid of the dependence on the use environment. The product has compact structure, precise design, recompensation for temperature and linearity, and integrated comprehensive protection functions such as short circuit, instantaneous high voltage, polarity, surge, etc. it is simple and convenient to use. The wireless digital signal transmission method eliminates the cumbersome wiring and noise interference caused by long cable transmission; The industrial design has extremely high measurement accuracy and anti-interference ability. The wireless sensor nodes can form a huge wireless network, support thousands of measuring points to monitor the inclination at the same time, and support professional computer software. Without field survey, it can measure and record the state of the measured object in real time; The safety monitoring system is suitable for remote real-time monitoring and analysis of industrial sites, dilapidated houses, ancient buildings, civil engineering, tilt deformation of various towers and other needs. Features Dual axis monitoring (single axis optional) Range: �±30�° Accuracy: 0.001�°, resolution: 0.0005�° Volume (94*74*64mm) (customizable) Ultra low power consumption Powered by built-in rechargeable lithium battery Wide temperature operation -40~+85â?? IP67 protection grade Applications Bridge construction PTZ levelling Ship navigation attitude measurement High railway foundation tunnel monitoring Satellite solar antenna positioning Medical equipment Angle control of various construction machinery
ER-TS-12200-Modbus Features: 1. Dual axis monitoring (single axis optional); 2. Full range accuracy 0.001 resolution 0.0005 3. Volume (94*74*64mm) (customizable). Introduction ER-TS-12200-Modbus High Precision Wireless Transmission Tilt Sensor is a wireless inclination sensor with ultra-low power consumption, small size and high performance, which is aimed at the industrial application of users without power supply or real-time dynamic measurement of object attitude angle. Powered by lithium battery, based on Internet of things technology Bluetooth and ZigBee (optional) wireless transmission technology, all internal circuits have been optimized and designed, and various measures such as industrial MCU, three proof PCB board, imported cable, wide temperature metal shell are adopted to improve the industrial level of the product. With good long-term stability and small zero drift, it can automatically enter the low-power sleep mode, so as to get rid of the dependence on the use environment. The product has compact structure, precise design, recompensation for temperature and linearity, and integrated comprehensive protection functions such as short circuit, instantaneous high voltage, polarity, surge, etc. it is simple and convenient to use. The wireless digital signal transmission method eliminates the cumbersome wiring and noise interference caused by long cable transmission; The industrial design has extremely high measurement accuracy and anti-interference ability. The wireless sensor nodes can form a huge wireless network, support thousands of measuring points to monitor the inclination at the same time, and support professional computer software. Without field survey, it can measure and record the state of the measured object in real time; The safety monitoring system is suitable for remote real-time monitoring and analysis of industrial sites, dilapidated houses, ancient buildings, civil engineering, tilt deformation of various towers and other needs. Features Dual axis monitoring (single axis optional) Range: ±30 Accuracy: 0.001 , resolution: 0.0005 Volume (94*74*64mm) (customizable) Ultra low power consumption Powered by built-in rechargeable lithium battery Wide temperature operation -40~+85 IP67 protection grade Applications Bridge construction PTZ levelling Ship navigation attitude measurement High railway foundation tunnel monitoring Satellite solar antenna positioning Medical equipment Angle control of various construction machinery
