Application industry: machinery, mine, metallurgy, shipping, water conservancy, etc. Working Length from 50mm to 16000mm Tube inside diameter range from 40mm to 1000mm Piston diameter range from 12mm to 410mm Working Pressure from 70 bar to 700 bar Seal type: UN or in accordance with clientâ??s requirement (we usually use PARKER from USA or MERKEL from Germany) Material of cylinder liner: copper (prolongs the life cycle of cylinder) Certificate by CCS, BV, GL, Lloyds, DNV, etc.
1) Goods: PALO SANTO / LIGNUM VITAE CYLINDERS - Info about Palo Santo / Lignum vitae (Bulnesia sarmientoi): Heartwood is greenish and It is often beautifully figured with blackish green fine veins. This specie has smell (good and pleasant smell) - Characteristics of the product: Logs freshly cut. Cylinders not very shapely; without Bark or maximum of 10% of bark on surface; and without sapwood or a maximum of 25% of sapwood on the surface. Each Cylinder is sealed by wax on all Surface and on both Tops also. - Quality: A-grade and better (oiled wood and with smell). - Sizes: . Diameters = from 200mm up to 450mm and up. . Lengths = 1,000mm and longer. * Note: These goods are raw material are much more suitable for Customers who want to have good quality in Lumber, as well as, who want to have a good and high yield in the production of the end products, such as: Rough sawn timber, Planed lumber (S4S) to produce Flooring (solid wood and engineered); Furniture (home & office); Interior home stair (planking & banister); Furniture and Interior decoration for Yacht;. As well as to produce: Stern tube bearings (Bearing or Bushing blocks lining of the stern tubes of propeller shafts of steamships). Attention: The great strength and tenacity of this wood, combined with the self-lubrificating properties due to the oil content, make this wood especially adapted for products under water. It is raw material to produce: Pencil vase, Carvings, Bowling balls, etc. - Capacity of loading = about 26 Tons in each 40â??CNTR. If you have a question, please, donâ??t hesitate to contact to us on: supplylumber at terra.com.br, and so, we will send to you other Details and Photos relating to this product made by our Company. Henry Chavez
Pneumatic Cylinder ISO 15552 Micky Mouse Profile Model : SDSU Bore Size : 32 to 100 mm Stroke Length : upto 1000mm Action : Double Acting Medium : Filtered and Lubricated Compressed Air Operating Pressure : 1-10 Kgf/cm2 Operating Piston Speed : 50-800mm/sec Cushion Type: Adjustable Cushioning both end Port Size : G1/8", G1/4", G3/8", G1/2",
40L high pressure oxygen/ argon gas cylinder Outside Diameter (mm): 219 Water Capacity(L): 40 "Heightï¼?without valve)(mm)": 1315 "Weight(without valve/ cop) (kg)": 48 Working Pressure(bar): 150 "Test Pressure(bar)": 250 "Wall Thickness(mm)" : 5.7 Material: 37Mn
SHACMAN Clutch Booster Cylinder-DZ9112230181 Product Description Mainly used for SHACMAN trucks, Parts Number: DZ9112230181 Packaging Method Wooden cases or Carton boxes or designed by customers' requirements. Delivery Method By sea or by air or discussed with customers. Delivery Time Within 10 workdays after receiving the deposit. Trade Term EXW, FOB, CFR, CIF, DAF, etc. After-sales service Response and provide satisfactory solutions within 24 hours. Our Advantages: Competitive Price ; Durable Quality ; On Time Delivery ; Excellent After-sales Service.
china supplier seamless steel cylinder / bottle/ tank low price
welding oxygen acetylene gas cylinder for industrial use
product features: Integral stop ring provides piston blow-out protection Double-acting for positive retraction Baked enamel outside finish and plated pistons provide superior corrosion resistance Safety valve in retract side of cylinder helps to prevent damage in case of accidental over-pressurization Interchangeable, hardened grooved saddles are standard Plunger wiper reduces contamination, extending cylinder life
Our website: alsafegascylinders point com I'm shirly bai. You can also write me to the following address: shirlybai at alsafegascylinders point com Product name: m6 oxygen gas cylinder Quality & safety 1. We have established the quality guarantee system according to the requirements for boiler and pressure vessel manufacturing licensing of china and obtained the certificate issued by general administration of quality supervision, inspection and quarantine of the p.R.C (aqsiq), qualified to manufacture b1 and b3 grade pressure vessels. 2. Each new type of cylinders has to pass type tests held in qualified laboratories approved by third party inspector (tuv, csei for example) before mass production, including bend test, drop test, hydrostatic test, etc. According to relevant standards. 3. Every batch of cylinders (200 pieces as one batch normally) are manufactured and tested under supervision of local special equipment inspection and research institute and then issued batch test report. 4. Each finished cylinder has to pass leakage test before delivery to customers to ensure no leakage occurs. Plasic net, carton and pallet
1. Small size, great lifting power 2. Multistages: 2 stages/3 stages/4stages/5 stages 3. Chromplated. Rustproof, hard. 4. It has a wide range of product series and can meet the demand of all customized small model vehicle cylinder series. 5. The strict control of cylinder dimensions can ensure the sincerity of two or multiple cylinders and lower the faulty risk of over-tipping caused by lifting deviation. 6. The repair rate is less than 0.3% for the past three years
Low-friction dynamic air cylinder: The rolling diaphragm creates the perfect seal for friction free cylinders, air proof, non-lubrication and low-friction, This product is supply the power required in push, promote, fasten, convolution, rotation and linearly motion operating conditions. The super cylinder composed of linear ball bearing and heat-treatmented piston rod.This precision elements can be used in conditions with very strictly sensitivity requirements because its high low-friction feature. Features: Excellent leak tightness, gastight, High-low friction, stationary motion, shockproofness; Hypersensitized even under very little pressure change; Low starting pressure and separating force; Non-lubrication High temperature resistance, high tensile, light weight, erotion control and low cost. Maintenance free, longevity of service, multiple type of products. Applied range: Use in constant tension output high precision equipments. Valve actuator, shock-mitigating device, aerodynamic retarder etc. Tension control system, dancer roll and heat-removal control system. Automation control, drag roll high sensitivity drive control. Factory's equipment with gastight and non-greasy dirt requirements. Body and parts: 6061high-strength aluminum alloy;anodized on surface Piston rod : material:20crmnti , thermal treatment-hard chromium -ground finish -hardness:60-62hrc Rubber diaphragm : butadiene nitrile rubber with filamentary fibre;service life:2million times Linear axletree: thk, myt(japan) Type: lcs59-75-s1-p Cylinder diameter: 59mm Working stroke: 75mm Plastic bag, inner box, master carton
The advent of the long stroke rolling diaphragm as a means of low-friction dynamic sealing has led to the development of controlair's line of diaphragm air cylinders. These cylinders provide virtually frictionless conversion of pneumatic pressure to linear force. The fact that there is no stiction or blow-by of any kind ensures accuracy, repeatability and sensitivity unheard of from conventional sliding seal air cylinders.
Ensuring life time in 3500hours, Implyed special stainless steel with perfect workmanship makes it manufacture any materials effectively under the working environment of pressure 380Mpa. So far,with more than ten years for selling products in the worldwide,we didn't get any claim for quality from buyers.
The production standards hove involved gb/t5099 gb/t11640 iso11439 dot-cffc en and en1975 Iso9809. Qiqihaer hua-an special high pressure vessel co., ltd had iso9001 certification and relevant products have certificated by france bv and gernany dekra. The company's product have supplied for many countries in asia and europe. Chief product: high pressure seamless steel cylinder Vehicles used cng steel cylinder Chief type: ª)140 ª)159 ª)219 ª)204 ª)232
Model CATERPILLAR IT18 / IT18B / IT28 / IT28B /916 / 926 / 926A / 926E OEM No 1 9C0166 Specs 1 100 mm Oil Type Brake Fluid
Specification Capacity: 11kg Propane Gas Tare Weight: 13.2kg (typical) Height: 560mm approx Diameter: 310mm approx Recommended Offtake: 50,000 BTU / hr
Propane Tanks Range in size from 5 to 100 lbs. Used in a variety of applications - domestic, recreational, commercial, and industrial. Conform with strict compliance to DOT specifications 4BA, 4BW, In addition, most cylinders conform and are approved under Transport Canada specifications 4BAM, 4BWM. Multiple testing procedures conducted for all cylinders. Steel shot blasted prior to painting. For maximum rust protection, all cylinders coated with Powder Coat Paint. Capacity gauges available in 20lb, 30lb, 40lb and 100lb cylinders. Cylinders are shrink-wrapped on pallets, or boxed individually, for protection and easy storage.
Ref. main specs on 40L O2 Gas Cylinders: -1). Water capacity: 40 Liter; Mat.: 37Mn; OD= 219 mm; W. P/T. P.: 15/25Mpa; Wall thickness: 5.7 mm; G. W.: ~47kg; Height: 1, 345 mm (W/O cylinder cap); Gas(O2): 6M3. -2). Color: As GREEN preferred; -3). Connecting thread: -4). Applied standard: ISO 9809-3; -5). Packing: Each with nylon bag or as preferred(based on bilateral agreement). What we can promise for you: *High quality and security gas cylinders; *Competitive unit price in the market; *Fast delivery (3~4 weeks); *Best after-sale service.
"!!! Specific price, Size, Weight Are subject to Inquiry!!!" Competitive brands:Â rexroth, HAGGLUNDS, AVENTICS, Danfoss, Parker, MOOG, sunhydraforce, EOWARDS, Leybold, INFICON and other European and American brands.
Usage - As Per Name This Single Acting Cylinders Are Used For Lifting Tractor Trailers
