items names ISO Viscosity Grade Kinetic viscosity Viscosity index Pour point Flash poire Application mm Anti-wear hydraulic oil Eunaquer1 32 30.89 5.5 115 -27 226 Designed for use in most industrial hydaulic systems which require anti-wear protection,intended for severely stressed hydaraulic systems reuiring a high level of anti-wear performance. Anti-wear hydraulic oil Eunaquer2 46 45.38 7 112 -24 232 Anti-wear hydraulic oil Eunaquer3 68 69.05 9.2 109 -24 240 Anti-wear hydraulic oil Eunaquer4 100 101.35 12 108 -24 248
Industrial lubricants oils.
SAE 40 - Industrial Oil SAE 50 - Industrial Oil AP3 Grease
HYDRAULIC OILS Turbine Oil General Purpose Oil Circulating Oils Compressor Oils Heat Transfer Fluids Soluble cutting Oil SCOPE Textron AW Hydraulic oils are premium quality anti-oxidant, anti-wear, anti-rust hydraulic oils for industrial hydraulic applications blended with selected high quality base stocks and special additives to give excellent dimulsibility, superior oxidation and thermal stability and excellent load carrying capacity. Main Benefits Excellent oxidation & thermal stability. Excellent load carrying capacity. Outstanding anti-wear performance. Superior filterability and good water separation. Low friction and hydraulic stability. Excellent air release and antifoam properties Application SCOPE Textron AW Hydraulic Oils can be used in all Hydraulic and fluid power transmission system suitable for a wide range of other industrial applications.
Petrol Engine Oil, Diesel Engine Oil and Industrial all type of lubricants are Available: 20w50, 5w30, 0w20, 10w40 SN (5W/40), SL (20/50), SJ (20W/50), Cl-4 (15W/40), Ci-4 (20W/50), CH-4 (15W/40), CH-4 (20W/50), CF-4 (15W/40), CF-4 (20W/50) Packing: 1Ltr. - 180 Kg or costumer needed Pe -API SN - ACEA A3/B3-04 - ACEA A3/B4-04 -MB 229.5 (Approved) - Porsche - VW 502/505 -BMW Long Life 98 - OPEL GM LL B -025 Performance Level: -API CH-4 - MB.228.3 - VOLVO VDS3 -MAN 3275 - ACEA E7/08 - Mack EOM Plus -MTU Catogrey II - ACEA A3/B4-08 Performance Features: High thermal stability. Superior oxidation resistant. Controls sludge build-up and deposits. Superior shear stability which result in Reducing oil consumption and wear protection. Cleaner engines and longer engine life Longer gasket and seal life.
Powergear SP ISO VG 100/ 150/ 220/ 320/ 460/ 680 range of oils have been developed to meet the widest range of requirements of EP (Extreme Pressure) lubrication such as industrial� gear oils operating under� severe duty. The oils are formulated from minerals base stocks and additives such as sulphur and phosphorus compounds to satisfy the widest range of operational requirements. APPLICATION Powergear SP Oils are recommended for lubrication of all types of industrial gears especially where operating conditions involve heavy loads, high pressure, high speed and high relative sliding velocities at elevated ambient and operating temperatures. Benefits Thermal and oxidation stability permitting continuous use at operating temperatures as high as 100 C. Grand demulsibility for rapid water separation. Excellent corrosion protection. Good anti-wear and EP properties. Long operating life.
COMPRESSOR on. Blended from refined based stocks with Antioxidant and Rust Inhibitor to provide satisfactory lubrication under high temperature and high load conditions. APPLICATION Acts as a barrier against contaminants, preventing them from entering the compressor and causing damage. BENEFITS Improved compressor performance and efficiency. Enhanced ec{uipment reliability and durabi1ityâ?¢. Reduced maintenance costs and downtime. Lower energy consumption. Protection against rust, corrosion, and excessive wear.
Hydrax 32/46/ 68/ 100/ 150/ 220 are high quality range of oils formulated using mineral base oils with antifoam, antioxidant, anti-wear mmd antiriist additives, meeting the requirements of most hydraulic systems. APPLICATION For automotive and industrial equipment, with a wide range of viscosities to suit all practical needs requiring high performance hydraulic oil. Beneftts Excellent anti-wear protection, oxidation resistance and thermal stability. Excellent demulsibility facilitates spontaneous separation of the oil from water ingress. Low pour-point enables a wide range of application at different temperatures. The high viscosity index ensures constant flow, low friction loss and good hydraulic efficiency. The antifoam properties and ready release of entrained air prevents operational difficulties with pumps.
Today, carrying out its operations in the facilities located at Gebze Organized Industry Zone on a land covering 25.500 m², with a 40.000 tons/year capacity, exporting its high quality & performance products which are also certified by international authorities, to more than 40 countries. its high-quality products in 5 main categories, -Metal Working Oils, Industrial lubricants, Automotive lubricants, Greases and Marine lubricants- in 34 product groups with 1.000 different synthetic, semi-synthetic and mineral type of products to the industry and consumers worldwide. Please contact us for order detail
Solest 170 is a formulated VG170 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years service in the field. Designed to maximize lubrication in HFC systems, Solest 170 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminum surfaces for increased system life and improved efficiency. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI's laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced downtime Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Soles 170, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Solest�® 170 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
Solest 170 is a formulated VG170 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years of service in the field. Designed to maximize lubrication in HFC systems, Solest 170 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminium surfaces for increased system life and improved efficiency. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI's laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced down-time Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 170, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Solest 170 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
Our agricoltural lubricants are high-quality Universal Tractor Transmission Oils. These multipurpose tractor oils are designed for year-round service in tractor hydraulic systems, transmissions, and differentials with wet brake systems. Our lubricants possess excellent friction properties and protect the target tractor parts from component wear and corrosion.
We are supplier and exporter of Industrial Oil.
CUTTINGOIL Provide lubrication to the cutting tool and work piece, u hich helps to improve the movement of the tool and reduce wear and tear on the machinery. APPLICATION Provide lubrication to the cutting tool and work piece, which helps to improve the movement of the tool and reduce wear and tear on the machinery. BENEFITS Low energy costs. The cooling feature of the cutting fluid and its lubrication effect is essential in lowering energy costs. Prevents rust and corrosion. Clears metal chips and debris. Reduces metal to metal contact. Limits residue formation.
Petrochemical : base oil / furnace oil / mho / cst range/ used engine oil / bitumen, Bio diesel : used cooking oil / specially blended soybean / canola oils for industrial use (insultating oil) / cnsl (cashe nut shell liquid) Automotive & industrial oils & lubricants (manufactured to every specific blend / brands ) Waste food solutions .Our logistics team can provide with prices based on ex tank in uae, fob in uae seaports and cif to the destination port of the buyers. we can arrange to supply in flexitanks (20ft container), ibc tanks and drums (208 litres)
Solest 68 is a formulated ISO VG68 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years service in the field. Designed to maximize lubrication in HFC systems, Solest 68 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminium surfaces for increased system life and improved efficiency. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Soles lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Rotary, Centrifugal, Scroll Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced down-time Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 68, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Solest 68 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
Solest 220 is a formulated ISO VG220 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years service in the field. Designed to maximize lubrication in HFC systems, Solest 220 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminium surfaces for increased system life and improved efficiency. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced down-time Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 220, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Solest 220 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
Solest 220 is a formulated ISO VG220 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years service in the field. Designed to maximize lubrication in HFC systems, Solest 220 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminium surfaces for increased system life and improved efficiency. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced down-time Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 220, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Soles 220 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
Solest 180 is a formulated VG180 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years service in the field. Designed to maximize lubrication in HFC systems, Solest 180 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminium surfaces for increased system life and improved efficiency. This grade offers excellent resistance to dilution in HFC refrigerants. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPIs laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced down-time Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 180, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Soles 180 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
Solest 180 is a formulated VG180 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years service in the field. Designed to maximize lubrication in HFC systems, Solest 180 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminum surfaces for increased system life and improved efficiency. This grade offers excellent resistance to dilution in HFC refrigerants. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI's laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced down-time Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 180, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Solest 180 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
