a Thirteen (13) slot chassis from the SLC500 Programmable Logic Controller (PLC) platform. This chassis provides backplane connections and housing to Central Processing Unit (CPU), I/O, Communication and specialty modules as well as the system power supply. The 1746-A13 is provided with Eight (8) mounting tabs, used for direct panel mounting of the chassis to the enclosure s subpanel. When mounting the module to the subpanel, appropriate screws are M4 or M5 (#10 or #12) phillips screw. Recommended mounting clearance are minimum of 15.3 cm (6.0 in) for top clearance and minimum of >10.2 cm (4.0 in) side clearance. When used with a rack extender cable such as 1746-C7, minimum spacing is 7.7 to 10.2 cm (3.0 to 4.0 in). Advantageous products we supply PLC : Allen Bradley , Siemens MOORE, GE FANUC , Schneider DCS : ABB ,Honeywell, Invensys Triconex , Foxboro , Ovation, YOKOGAWA, Woodword, HIMA TSI : Triconex , HIMA , Bently Nevada , ICS Triplex You may interested AB 1756-OB16D AB 1756-OB16E AB 1756-RMC10 AB 1763-L16BBB AB 1768-EWEB AB 1768-L43S AB 1768-MO4SE AB 1783-BMS06SA AB 1786-RG6 AB 1756-L61 AB 1783-MS10T AB 1786-TPS AB 1786-XT AB 1756-CNB AB 1756-EN2F AB 1756-IA16 AB 1756-IA16I AB 1768-L45S AB 1769-L19ER-BB1B AB 1426-M5E-DNT AB 22A-D8P7N104 AB 22B-D4P0N104 AB 1786-CP ICS TRIPLEX T8151C ICS TRIPLEX T8311C ICS TRIPLEX T8461C ICS TRIPLEX T8480 ICS TRIPLEX T8480C AB 1746-A10 AB 1746-A13 AB 1746-A4 AB 1746-A7 AB 1746-BAS AB 1746-C16 AB 1746-C9 AB 1746-FIO4V AB 1746-HSCE AB 1746-HSCE2 AB 1746-HSRV AB 1746-HSTP1 AB 1746-HT AB 1746-IA16 AB 1746-IA16 AB 1746-IA8 AB 1746-IB16 AB 1746-IB32 AB 1746-IB8 AB 1746-IC16 AB 1746-IG16 AB 1746-IM16 AB 1746-IN16 AB 1746-ITV16 AB 1746-IV16 AB 1746-IV32 AB 1746-IV8 AB 1746-N04I AB 1746-N2 AB 1746-NI04I AB 1746-NI16I AB 1746-NI16V AB 1746-NI4 AB 1746-NI4/B AB 1746-NI8 AB 1746-NI8 AB 1746-NIO4I AB 1746-NIO4I AB 1746-NIO4V AB 1746-NO4I AB 1746-NO4V
a Thirteen (13) slot chassis from the SLC500 Programmable Logic Controller (PLC) platform. This chassis provides backplane connections and housing to Central Processing Unit (CPU), I/O, Communication and specialty modules as well as the system power supply. The 1746-A13 is provided with Eight (8) mounting tabs, used for direct panel mounting of the chassis to the enclosure s subpanel. When mounting the module to the subpanel, appropriate screws are M4 or M5 (#10 or #12) phillips screw. Recommended mounting clearance are minimum of 15.3 cm (6.0 in) for top clearance and minimum of >10.2 cm (4.0 in) side clearance. When used with a rack extender cable such as 1746-C7, minimum spacing is 7.7 to 10.2 cm (3.0 to 4.0 in). Advantageous products we supply PLC : Allen Bradley , Siemens MOORE, GE FANUC , Schneider DCS : ABB ,Honeywell, Invensys Triconex , Foxboro , Ovation, YOKOGAWA, Woodword, HIMA TSI : Triconex , HIMA , Bently Nevada , ICS Triplex You may interested AB 1756-OB16D AB 1756-OB16E AB 1756-RMC10 AB 1763-L16BBB AB 1768-EWEB AB 1768-L43S AB 1768-MO4SE AB 1783-BMS06SA AB 1786-RG6 AB 1756-L61 AB 1783-MS10T AB 1786-TPS AB 1786-XT AB 1756-CNB AB 1756-EN2F AB 1756-IA16 AB 1756-IA16I AB 1768-L45S AB 1769-L19ER-BB1B AB 1426-M5E-DNT AB 22A-D8P7N104 AB 22B-D4P0N104 AB 1786-CP ICS TRIPLEX T8151C ICS TRIPLEX T8311C ICS TRIPLEX T8461C ICS TRIPLEX T8480 ICS TRIPLEX T8480C AB 1746-A10 AB 1746-A13 AB 1746-A4 AB 1746-A7 AB 1746-BAS AB 1746-C16 AB 1746-C9 AB 1746-FIO4V AB 1746-HSCE AB 1746-HSCE2 AB 1746-HSRV AB 1746-HSTP1 AB 1746-HT AB 1746-IA16 AB 1746-IA16 AB 1746-IA8 AB 1746-IB16 AB 1746-IB32 AB 1746-IB8 AB 1746-IC16 AB 1746-IG16 AB 1746-IM16 AB 1746-IN16 AB 1746-ITV16 AB 1746-IV16 AB 1746-IV32 AB 1746-IV8 AB 1746-N04I AB 1746-N2 AB 1746-NI04I AB 1746-NI16I AB 1746-NI16V AB 1746-NI4 AB 1746-NI4/B AB 1746-NI8 AB 1746-NI8 AB 1746-NIO4I AB 1746-NIO4I AB 1746-NIO4V AB 1746-NO4I AB 1746-NO4V
a Thirteen (13) slot chassis from the SLC500 Programmable Logic Controller (PLC) platform. This chassis provides backplane connections and housing to Central Processing Unit (CPU), I/O, Communication and specialty modules as well as the system power supply. The 1746-A13 is provided with Eight (8) mounting tabs, used for direct panel mounting of the chassis to the enclosure s subpanel. When mounting the module to the subpanel, appropriate screws are M4 or M5 (#10 or #12) phillips screw. Recommended mounting clearance are minimum of 15.3 cm (6.0 in) for top clearance and minimum of >10.2 cm (4.0 in) side clearance. When used with a rack extender cable such as 1746-C7, minimum spacing is 7.7 to 10.2 cm (3.0 to 4.0 in). Advantageous products we supply PLC : Allen Bradley , Siemens MOORE, GE FANUC , Schneider DCS : ABB ,Honeywell, Invensys Triconex , Foxboro , Ovation, YOKOGAWA, Woodword, HIMA TSI : Triconex , HIMA , Bently Nevada , ICS Triplex You may interested AB 1756-OB16D AB 1756-OB16E AB 1756-RMC10 AB 1763-L16BBB AB 1768-EWEB AB 1768-L43S AB 1768-MO4SE AB 1783-BMS06SA AB 1786-RG6 AB 1756-L61 AB 1783-MS10T AB 1786-TPS AB 1786-XT AB 1756-CNB AB 1756-EN2F AB 1756-IA16 AB 1756-IA16I AB 1768-L45S AB 1769-L19ER-BB1B AB 1426-M5E-DNT AB 22A-D8P7N104 AB 22B-D4P0N104 AB 1786-CP ICS TRIPLEX T8151C ICS TRIPLEX T8311C ICS TRIPLEX T8461C ICS TRIPLEX T8480 ICS TRIPLEX T8480C AB 1746-A10 AB 1746-A13 AB 1746-A4 AB 1746-A7 AB 1746-BAS AB 1746-C16 AB 1746-C9 AB 1746-FIO4V AB 1746-HSCE AB 1746-HSCE2 AB 1746-HSRV AB 1746-HSTP1 AB 1746-HT AB 1746-IA16 AB 1746-IA16 AB 1746-IA8 AB 1746-IB16 AB 1746-IB32 AB 1746-IB8 AB 1746-IC16 AB 1746-IG16 AB 1746-IM16 AB 1746-IN16 AB 1746-ITV16 AB 1746-IV16 AB 1746-IV32 AB 1746-IV8 AB 1746-N04I AB 1746-N2 AB 1746-NI04I AB 1746-NI16I AB 1746-NI16V AB 1746-NI4 AB 1746-NI4/B AB 1746-NI8 AB 1746-NI8 AB 1746-NIO4I AB 1746-NIO4I AB 1746-NIO4V AB 1746-NO4I AB 1746-NO4V
a Thirteen (13) slot chassis from the SLC500 Programmable Logic Controller (PLC) platform. This chassis provides backplane connections and housing to Central Processing Unit (CPU), I/O, Communication and specialty modules as well as the system power supply. The 1746-A13 is provided with Eight (8) mounting tabs, used for direct panel mounting of the chassis to the enclosure s subpanel. When mounting the module to the subpanel, appropriate screws are M4 or M5 (#10 or #12) phillips screw. Recommended mounting clearance are minimum of 15.3 cm (6.0 in) for top clearance and minimum of >10.2 cm (4.0 in) side clearance. When used with a rack extender cable such as 1746-C7, minimum spacing is 7.7 to 10.2 cm (3.0 to 4.0 in). Advantageous products we supply PLC : Allen Bradley , Siemens MOORE, GE FANUC , Schneider DCS : ABB ,Honeywell, Invensys Triconex , Foxboro , Ovation, YOKOGAWA, Woodword, HIMA TSI : Triconex , HIMA , Bently Nevada , ICS Triplex You may interested AB 1756-OB16D AB 1756-OB16E AB 1756-RMC10 AB 1763-L16BBB AB 1768-EWEB AB 1768-L43S AB 1768-MO4SE AB 1783-BMS06SA AB 1786-RG6 AB 1756-L61 AB 1783-MS10T AB 1786-TPS AB 1786-XT AB 1756-CNB AB 1756-EN2F AB 1756-IA16 AB 1756-IA16I AB 1768-L45S AB 1769-L19ER-BB1B AB 1426-M5E-DNT AB 22A-D8P7N104 AB 22B-D4P0N104 AB 1786-CP ICS TRIPLEX T8151C ICS TRIPLEX T8311C ICS TRIPLEX T8461C ICS TRIPLEX T8480 ICS TRIPLEX T8480C AB 1746-A10 AB 1746-A13 AB 1746-A4 AB 1746-A7 AB 1746-BAS AB 1746-C16 AB 1746-C9 AB 1746-FIO4V AB 1746-HSCE AB 1746-HSCE2 AB 1746-HSRV AB 1746-HSTP1 AB 1746-HT AB 1746-IA16 AB 1746-IA16 AB 1746-IA8 AB 1746-IB16 AB 1746-IB32 AB 1746-IB8 AB 1746-IC16 AB 1746-IG16 AB 1746-IM16 AB 1746-IN16 AB 1746-ITV16 AB 1746-IV16 AB 1746-IV32 AB 1746-IV8 AB 1746-N04I AB 1746-N2 AB 1746-NI04I AB 1746-NI16I AB 1746-NI16V AB 1746-NI4 AB 1746-NI4/B AB 1746-NI8 AB 1746-NI8 AB 1746-NIO4I AB 1746-NIO4I AB 1746-NIO4V AB 1746-NO4I AB 1746-NO4V
a Thirteen (13) slot chassis from the SLC500 Programmable Logic Controller (PLC) platform. This chassis provides backplane connections and housing to Central Processing Unit (CPU), I/O, Communication and specialty modules as well as the system power supply. The 1746-A13 is provided with Eight (8) mounting tabs, used for direct panel mounting of the chassis to the enclosure s subpanel. When mounting the module to the subpanel, appropriate screws are M4 or M5 (#10 or #12) phillips screw. Recommended mounting clearance are minimum of 15.3 cm (6.0 in) for top clearance and minimum of >10.2 cm (4.0 in) side clearance. When used with a rack extender cable such as 1746-C7, minimum spacing is 7.7 to 10.2 cm (3.0 to 4.0 in). Advantageous products we supply PLC : Allen Bradley , Siemens MOORE, GE FANUC , Schneider DCS : ABB ,Honeywell, Invensys Triconex , Foxboro , Ovation, YOKOGAWA, Woodword, HIMA TSI : Triconex , HIMA , Bently Nevada , ICS Triplex You may interested AB 1756-OB16D AB 1756-OB16E AB 1756-RMC10 AB 1763-L16BBB AB 1768-EWEB AB 1768-L43S AB 1768-MO4SE AB 1783-BMS06SA AB 1786-RG6 AB 1756-L61 AB 1783-MS10T AB 1786-TPS AB 1786-XT AB 1756-CNB AB 1756-EN2F AB 1756-IA16 AB 1756-IA16I AB 1768-L45S AB 1769-L19ER-BB1B AB 1426-M5E-DNT AB 22A-D8P7N104 AB 22B-D4P0N104 AB 1786-CP ICS TRIPLEX T8151C ICS TRIPLEX T8311C ICS TRIPLEX T8461C ICS TRIPLEX T8480 ICS TRIPLEX T8480C AB 1746-A10 AB 1746-A13 AB 1746-A4 AB 1746-A7 AB 1746-BAS AB 1746-C16 AB 1746-C9 AB 1746-FIO4V AB 1746-HSCE AB 1746-HSCE2 AB 1746-HSRV AB 1746-HSTP1 AB 1746-HT AB 1746-IA16 AB 1746-IA16 AB 1746-IA8 AB 1746-IB16 AB 1746-IB32 AB 1746-IB8 AB 1746-IC16 AB 1746-IG16 AB 1746-IM16 AB 1746-IN16 AB 1746-ITV16 AB 1746-IV16 AB 1746-IV32 AB 1746-IV8 AB 1746-N04I AB 1746-N2 AB 1746-NI04I AB 1746-NI16I AB 1746-NI16V AB 1746-NI4 AB 1746-NI4/B AB 1746-NI8 AB 1746-NI8 AB 1746-NIO4I AB 1746-NIO4I AB 1746-NIO4V AB 1746-NO4I AB 1746-NO4V
a Thirteen (13) slot chassis from the SLC500 Programmable Logic Controller (PLC) platform. This chassis provides backplane connections and housing to Central Processing Unit (CPU), I/O, Communication and specialty modules as well as the system power supply. The 1746-A13 is provided with Eight (8) mounting tabs, used for direct panel mounting of the chassis to the enclosure s subpanel. When mounting the module to the subpanel, appropriate screws are M4 or M5 (#10 or #12) phillips screw. Recommended mounting clearance are minimum of 15.3 cm (6.0 in) for top clearance and minimum of >10.2 cm (4.0 in) side clearance. When used with a rack extender cable such as 1746-C7, minimum spacing is 7.7 to 10.2 cm (3.0 to 4.0 in). Advantageous products we supply PLC : Allen Bradley , Siemens MOORE, GE FANUC , Schneider DCS : ABB ,Honeywell, Invensys Triconex , Foxboro , Ovation, YOKOGAWA, Woodword, HIMA TSI : Triconex , HIMA , Bently Nevada , ICS Triplex You may interested AB 1756-OB16D AB 1756-OB16E AB 1756-RMC10 AB 1763-L16BBB AB 1768-EWEB AB 1768-L43S AB 1768-MO4SE AB 1783-BMS06SA AB 1786-RG6 AB 1756-L61 AB 1783-MS10T AB 1786-TPS AB 1786-XT AB 1756-CNB AB 1756-EN2F AB 1756-IA16 AB 1756-IA16I AB 1768-L45S AB 1769-L19ER-BB1B AB 1426-M5E-DNT AB 22A-D8P7N104 AB 22B-D4P0N104 AB 1786-CP ICS TRIPLEX T8151C ICS TRIPLEX T8311C ICS TRIPLEX T8461C ICS TRIPLEX T8480 ICS TRIPLEX T8480C AB 1746-A10 AB 1746-A13 AB 1746-A4 AB 1746-A7 AB 1746-BAS AB 1746-C16 AB 1746-C9 AB 1746-FIO4V AB 1746-HSCE AB 1746-HSCE2 AB 1746-HSRV AB 1746-HSTP1 AB 1746-HT AB 1746-IA16 AB 1746-IA16 AB 1746-IA8 AB 1746-IB16 AB 1746-IB32 AB 1746-IB8 AB 1746-IC16 AB 1746-IG16 AB 1746-IM16 AB 1746-IN16 AB 1746-ITV16 AB 1746-IV16 AB 1746-IV32 AB 1746-IV8 AB 1746-N04I AB 1746-N2 AB 1746-NI04I AB 1746-NI16I AB 1746-NI16V AB 1746-NI4 AB 1746-NI4/B AB 1746-NI8 AB 1746-NI8 AB 1746-NIO4I AB 1746-NIO4I AB 1746-NIO4V AB 1746-NO4I AB 1746-NO4V
a Thirteen (13) slot chassis from the SLC500 Programmable Logic Controller (PLC) platform. This chassis provides backplane connections and housing to Central Processing Unit (CPU), I/O, Communication and specialty modules as well as the system power supply. The 1746-A13 is provided with Eight (8) mounting tabs, used for direct panel mounting of the chassis to the enclosure s subpanel. When mounting the module to the subpanel, appropriate screws are M4 or M5 (#10 or #12) phillips screw. Recommended mounting clearance are minimum of 15.3 cm (6.0 in) for top clearance and minimum of >10.2 cm (4.0 in) side clearance. When used with a rack extender cable such as 1746-C7, minimum spacing is 7.7 to 10.2 cm (3.0 to 4.0 in). Advantageous products we supply PLC : Allen Bradley , Siemens MOORE, GE FANUC , Schneider DCS : ABB ,Honeywell, Invensys Triconex , Foxboro , Ovation, YOKOGAWA, Woodword, HIMA TSI : Triconex , HIMA , Bently Nevada , ICS Triplex You may interested AB 1756-OB16D AB 1756-OB16E AB 1756-RMC10 AB 1763-L16BBB AB 1768-EWEB AB 1768-L43S AB 1768-MO4SE AB 1783-BMS06SA AB 1786-RG6 AB 1756-L61 AB 1783-MS10T AB 1786-TPS AB 1786-XT AB 1756-CNB AB 1756-EN2F AB 1756-IA16 AB 1756-IA16I AB 1768-L45S AB 1769-L19ER-BB1B AB 1426-M5E-DNT AB 22A-D8P7N104 AB 22B-D4P0N104 AB 1786-CP ICS TRIPLEX T8151C ICS TRIPLEX T8311C ICS TRIPLEX T8461C ICS TRIPLEX T8480 ICS TRIPLEX T8480C AB 1746-A10 AB 1746-A13 AB 1746-A4 AB 1746-A7 AB 1746-BAS AB 1746-C16 AB 1746-C9 AB 1746-FIO4V AB 1746-HSCE AB 1746-HSCE2 AB 1746-HSRV AB 1746-HSTP1 AB 1746-HT AB 1746-IA16 AB 1746-IA16 AB 1746-IA8 AB 1746-IB16 AB 1746-IB32 AB 1746-IB8 AB 1746-IC16 AB 1746-IG16 AB 1746-IM16 AB 1746-IN16 AB 1746-ITV16 AB 1746-IV16 AB 1746-IV32 AB 1746-IV8 AB 1746-N04I AB 1746-N2 AB 1746-NI04I AB 1746-NI16I AB 1746-NI16V AB 1746-NI4 AB 1746-NI4/B AB 1746-NI8 AB 1746-NI8 AB 1746-NIO4I AB 1746-NIO4I AB 1746-NIO4V AB 1746-NO4I AB 1746-NO4V
Product Description It can be used in many aspects, especially in various flat forming conversions of thermoplastics, such as PP, HDPE, and LDPE etc. It is mainly used for woven bag, jumbo bag, the sun-shade net etc. This line has the performance of high speed, high production, low energy consumption, good forming quality of the bobbin. The structure of this line is compact with a pleasing appearance,smooth running, flexible and reliable control excellent manufacturing technics, convenient and safe operation. Features of Machine: Most experienced manufacturer: Professional machine and mature technology with more than 20 years experience. Green and economic: 100% recycled PET water bottle flakes or recycled PP resin as raw material to make qualified plastic filament yarn for various usage such as cleaning broom, brush, and packing rope. Machine Development: Continuous improvement and feedback from customers from more than fifty countries all around the world. Better performance: low energy consumption, high production capability Easy Operation: Automatic and convenient operation with one worker Technical Parameters Model TPM-65 TPM-80 TPM-90 Die width 600mm 800mm 1000mm Screw diameter 65mm 80mm 90mm Stretch Ratio 1:8 1:8 1:8 Size 24 32.5m 263 2.5m 28 32.5m Total power 60KW 80KW 100KW weight 3T 3.5T 4T Machine list No Description Quantity 1 Dehumidifying and Crystallizing Equipment 1 set 2 SJ-75/33 Single Screw Extruder 1 set 3 Automatic Screen Changer 1 set 4 Mold 1 set 5 Water Tank Cooling System 1 set 6 The first seven haul off machine 1 set 7 Water heating oven 1 set 8 the secend seven haul off machine 1 set 9 Glazing machine 1 set 10 Air oven 1 set 11 the third seven rollers haul off machine 1 set 12 winding machine 1 set 13 shaping machine 1 set 14 cutting machine 1 set 15 packaing machine 1 se
Product Description Plastic Twine and rope filament extruding machine is automatic production line for PET, PP, HDPE, PA monofilament which is used to produce different kinds plastic rope and twine product.This unit can produce PET, PP, PE,PA monofilament automatically for plastic rope product. To make different raw materials plastic rope fiber, we have advanced and professional machine line design and technology support which is in leading position in this field. With recycled raw material, and less labor requirements, the production cost is cheap, so our clients will get good profit in the market. Advantage 1. Most experienced manufacturer: Professional machine and mature technology with more than 20 years experience. 2. Green and Eco-friendly: 100% recycled PET flakes as the raw material for PET filament and can be recycled many times 3. Machine Development: Continuous improvement and feedback from Customers from more than twenty countries all around the world. 4. Better performance: low energy consumption, high production capability 5. Automatic Operation: Automatic and convenient operation with one or two workers Technical Parameter Model TPM-75 TPM-80 TPM-90 Screw L/D 30:1 30:1 30:1 Gearbox model 200 225 225 Main motor 18.5kw 22/30kw 30/37kw Capacity(kg/h) 80-100kg 100-120kg 120-140kg Mould Dia. 200 200 200 Filament Dia. 0.01-2.5mm 0.015-2.5mm 0.015-2.5mm Machine List 1 SJ75/SJ80/SJ90 single screw extruder 1 set 2 Die head 1 set 3 Water-cooling tank 1 set 4 First tensile machine 1 set 5 Pre-heating machine 1 set 6 Second tensile machine 1set 7 Third tensile machine 1 set 8 Oil bath tank 1 set 9 Pneumatic tensioner 1 set 10 Two position winder 1 set Electrical Configuration 1) Main motor frequency controller: ABB 2) Temperature controller: OMRON 3) AC contactor: SIEMENS 4) Thermal overload relay: SIEMENS 5) Breaker: CHINT or according to customer requirement
Product Description PVC profile production line is composed of cone twin screw extruder, vacuum calibration tank, haul-off, cutter, stacker, and also coordinated with different profile break-section and mould to produce PVC door&window profile,indoor floor, decoration plate material, profile and multi-hole wire plastic products etc. This extrusion line also can be used to produce wpc profile extrusion line WPC Machine can be used after recycling, and has been widely used in fields of floor, guard bar, tray, packing cases, partition board, window and door sheath, skirting line, etc. Configuration Mixer �· Mixing PVC powder, CACO3 and other addictives. �· Widely used in PVC pipe and profile production. �· Composed of high speed mixer (hot mixer), cooling mixer and control cabinet. �· Stainless steel SUS304 for the internal wall construction. It will guarantee the mixer could use for long time under the high friction. �· The mixing blades are passed the static and dynamic balance testing. And the main shaft adopts fine sealing to prevent material leakage. Extruder Different models for options: SJSZ51/105, SJSZ65/132. High quality electrical components, like Siemens, Omron, Fuji, Delta, etc. Alloy screw & barrel, which guarantee high quality and stable output. Equipped with high qualty gearbox and distributor. Extruder control by PLC screen touch is available as well; PLC screen touch is from Siemens (customized). Vacuum calibration table Include full set of vacuum and water pump Width: 240mm Length: 6000mm Independent operation panel for easy operation Haul off speed control by inverter Fast change type pads for easy operation Install plate is adopts aluminum material Cutter Lifting saw cutter with adopts double station dust collection system Synchronous drivingby air cylinder or servo motor control stacker Stainless steel304 as touching material Discharge driving by air cylinder Technical Parameter Model SJSZ-51/105 SJSZ-65/132 Total installation power(kw) 130 155 Transformer (kw) 100 100 Actual electricity consumption(kw) 50 50 Output (kg\h) 120-140 240 Line speed (m\min) 1-3 1-3 Motor power(kw) 22 37 UPVC/PVC/WPC/ Ceiling/Wall Panel Twin Extruder Production Line Packing and delivery UPVC/PVC/WPC/ Ceiling/Wall Panel Twin Extruder Production Line
Mask Melt-blown Cloth Spinneret Die Mould 1. overview and principle of meltblown cloth equipment the melt-blown method is a method for preparing fibers by blowing polymer melts with high-temperature and high-speed airflow to rapidly draw them. (melt-blown cloth extruder, melt-blown cloth equipment, melt-blown cloth production line) after the polymer chips are heated and pressed into a molten state by a screw extruder, they reach the spinneret hole at the front end of the nozzle through the melt distribution flow path, and after extrusion, they are refined by two converging high-speed and high-temperature air flows to refine . the refined fibers are cooled and solidified on the screen device to form a melt-blown nonwoven fabric. 2. components of meltblown cloth equipment meltblown heads, automatic charging system equipment components, ultrasonic cleaning machines, air heaters, centrifugal fans, screw extruders, meltblown web forming machines, meltblown offline winding machines, meltblown offline slitting machines and other key equipment. 3. the core components of meltblown cloth equipment spinneret the spinneret for melt spinning is a representative spinneret for the manufacture of synthetic fibers such as polyester and nylon. the thermoplastic resin is heated and melted, extruded through the spinneret in air or water at a certain speed, and cooled spinning method of solidifying into fibers the most core technology is the small nozzle on the spinneret. this nozzle not only has a small size of only 0.15mm, but also needs to process a complex hole pattern on such a small nozzle. the processing is extremely difficult, and the nozzle processing process requires months. if the processing accuracy is not high, the melt-blown cloth finally produced will not meet the corresponding technical requirements, which will affect the protective performance of the mask. structure of melt-blown cloth spinneret according to the shape of the spinneret, the structure of the spinneret can be divided into three forms: round, sector and rectangle. at present, round and rectangular plates are mostly used at home and abroad. to suit different chemical fiber spinning occasions, the round spinneret is divided into flat type, flange flat type, flat ring, flange ring, etc .: the rectangular spinneret is divided into flange rectangle and flange groove rectangle, etc. , mostly used for spinning short fibers with many holes. meltblown cloth spinneret structure
Capacity 25-100 Tons Hydraulic Jacks: Screwed Ram Type Jacks: SR (Capacity: 2- 20 Tons) Special Features Reliable Solid Compact Light Weight Simple Design Versatile Performance Type SR 2/120 SR 3/150 SR 5/150 SR 8/150 SR 10/150 SR 12/150 SR 15/150 SR 20/150 Capacity in Tons 2 3 5 8 10 12 15 20 Closed Height 205 235 248 248 252 252 260 260 Hydraulic Lift 120 150 150 150 150 150 150 150 Extended height 325 385 398 398 402 402 410 410 Ram Diameter 30 30 36 43 46 52 58 65 Body Diameter 65 65 72 86 90 98 112 126 Base Size L*B 115*115 115*115 125*125 150*140 150*150 150*150 170*170 180*180 Approx.Weight in kg. 5 6 8 10 11 12 16.5 22 Designs &specifications subject to alterations for the sake of improvement without notice. All dimensions are in approx. mm unless otherwise stated. Other Features Widest selection of standard capacities Reliability through proved and accepted highest standard of quality product performance All critical components made from selected alloy steel and electrically welded for greater strength anf safety. Each product goes through a series of check and test to conform to Bureau of Indian standards and International Standards. Cylinders-Seamless steal Honed Tubes to DIN 2391-C, Grade 525/E-355, Stress relieved annealed yield strength Rp 0,2 min. Tensile strength- Rm min. 600 N/mm2 . Surface finish- Ra 0.3 ohms . Fast and easy maintence. Spares and Service readily and easily available. Screwed Ram with Safety Lock Nut for Additional safety and Unlimited Duration Load Holding Advantages. Advantages Simple in operation. Effortless, time saving and safe. Suitable carrying handle provided with each jack.
Corn Flakes Processing Line produces cereal flakes, both plain or coated. The twin-screw extrusion technology is at the core of this very flexible and scalable process. Main Equipment: Corn Flakes Processing Line produces cereal flakes, both plain or coated. The twin-screw extrusion technology is at the core of this very flexible and scalable process. This technology is ideal to meet the market demands and breakfast cereal manufacturing: many raw materials are eligible with coating recipes such as sweet syrups, honey, chocolate and other compositions. Technical Features: We share our process knowledge to process healthy and balanced products made with wholegrain cereals or including a mix of multi-grains like corn, wheat, oats, rice, barley, rye, Buckwheat or barley... Corn Flakes Extruder is used to produce consistently high quality products while keeping the same organoleptic characteristics as traditional flakes. System Advantage: Advantages of Corn Flakes Processing Equipment:  1. Quicker process : 15 to 20 minutes against 8 to 10 hours with the traditional batch process 2. Variety of recipes: diversity of raw materials (cereals, tubers, various ingredients �?�) and particle size used (from flour to semolina), wide range of coatings 3. Possibility to add functional and tasty ingredients : natural color, salt, fiber, vitamins, minerals, emulsifiers, 4. Possibility to process multigrain flakes, for example by introducing other grains directly during extrusion. 5. Possibility to upgrade the production line to process expanded or coextruded breakfast cereals 6. Productive: continuous and automated process, quick start up and stop, fast and easy changeovers and with easy cleaning and maintenance procedures; 7. Cost effective : intensified transformation process generating savings in raw materials as well as energy and water, easy maintenance, hygienic design, compact design with less floor space Application Scope: Technical Parameters of Corn Flakes Equipment: Model Capacity Power Dimension QL-65 120-150kg/hr 180kw 40 x 5 x 3m QL-70 200-260kg/hr 260kw 45 x 5 x 3m
This Bypass Sliding Door Track Kit Set is the perfect way to create a barn style with smooth finish and smart looking to your home or office. Made from high quality steel,Website:http://www.metekbarndoor.com, and the door hardware are strong and sturdy which will withstand the test of time, with the capability to hold up 180kg in door weight capacity. It comes with all the necessary accessories for assembling, just completed in minutes.Item Configuration Components Material Specification HangerSteel+POMWheels made by POM is smooth and quiet when sliding, we have tested finished hangers beyond 100,000 rolls. Two different sets of bolts for attaching hangers to the door in order to accommodate doors ranging from 35mm to 45mm thick.RailSteelRail is constructed of solid 6mm thick 40mm width steel, finished with highly durable powder coating. This gets baked onto the steel at 400 degrees and creates the strongest bond possible. The longest rail in one piece we can supply is 4 meters.Bypass connectorSteelMounted on the wall to fix the front rail. Metek provide connector in one piece or in two piecesBolt& spacerSteelBolts (of the highest grade available) with washers and rail spacers attach the rail securely to the studs, or header board, for supporting up to 180kgs comfortably. These plated screws wonâ??t be rust easily.Door stopperSteelDoor stopper slide along the rail and tighten down at any point to stop your door exactly where you want, and theyâ??re cushioned by rubber caps for a quiet close. All stoppers are matching rail without big gap like others.Anti-jumpPOMAnti-jump Discs with Screws install on the door top to Stop the rollers jump out from rail.Floor guiderPOMT-shaped floor guide is supplied (with anchors) as our standard configuration to prevent the door from swinging out or up against the baseboard. More other style guides for your options if need.Advantagesâ?? Metek specialized in sliding door and hardware for many years and have accumulated rich experience. With strict regulations, we passed factory inspection successfully by SGS,TUV and foreign customers. As a factory, we can offer competitive price. â?? All items will be checked carefully before packing . Certificates of CE,FSC,SGS and Intertek are available.
Tungsten carbide is one of the best materials with its highest hardness,wear resistance material in the industrial except diamond. HF WC is a nickel cored flexible rod coated with mainly spherical fused/cast tungsten carbide and Ni-Cr-B-Si-Matrix. The hard facing is highly resistance to acids,bases,lye,and other corrosive media and excessive wear conditions.It can be covered on the carbon steel,low carbon steel,low alloy steel,stainless steel,cast iron and ductile iron surfacing, suitable for oil drilling tools (such as PDC drill,Centralizers),building machinery (such as the blade of brick and concrete production),mining geological tools,agriculture,food and chemical industry machinery.It is mainly used for surfacing and repairing for the strong wear and tear corrosion part,can significantly reduce tool wear and tear,improve work efficiency.The rod has a low mlting range of between 950-1060 �?? and feature a self fluxing characteristic producing a smooth,clean welded surface. Application: Hard facing on ferritic and austenitic steels(steel castings),over-laying mixed blades,screws and conveyors in chemical,dye and food industry. Specially recommended for stabilizer blade in the petroleum industry. HF WC-S can hold the higher load wear, higher resistance to high stress and high stress wear.HF WC-S particles mainly is spherical casting WC particles and irregular casting WC particles,sepherical cast tungsten carbide particles have good toughness and strength binding with the metal,supplemented by a certain amount of irregular casting carbonization,so that the surfacing layer has a better wear resistance and impact resistance.The actual thickness of surfacing electrode, different diameters can be choosed accor- ding to the tools demand,generally covered 1 to 3 layers. Application: Hard facing on opetroleum industry tools(PDC,stabilizer blade),ferritic and austenitic steels(steel castings),over-laying mixed blades,screws and conveyors in chemical,shredding machine,mining scraper, mud pump blades, drill pipe joints, centralizer, mining cut Teeth, cone and so on. HF WC-C is suitable for low stress wear conditions,with a higher resistance to low stress wear.HF WC-C mainly filled with irregular casted WC particles. The hard particle size designed optimization,which blend different particle size very well. In the process of welding hard particles are closely,so improve the wear resistance and impact resistance of the surfacing layer. Application: Hard facing on opetroleum industry tools(PDC,stabilizer blade),shredding machine,Turning machine,drilling rock machine,mining scraper, surfacing and repaired mud pump blades, drill pipe joints, centralizer and so on.
Detailed Product Description Touching electrostatic eliminator also named human body electrostatic eliminator. With the rapid development of industrial economy, more and more appear particularly important to eliminate static electricity. The human body electrostatic eliminator which adopts a passive circuit, the circuit works by electrostatic human body, finally to eliminate the electrostatic effect. Its features are: small size, light weight. Without power supply. Convenient installation. The characteristics of static elimination without feeling. Touching type electrostatic eliminator, the appearance is made of stainless steel tube and the ball is made of stainless steel, which is suitable for chemical industry, metallurgy, military, oil, fireworks, computer room, high-grade hotels,hotel, office and other inflammable and explosive places. The circuit principle and the other is basically the same, it is the biggest characteristic of energy at the temperature of -50~100 â?? normal work. Human Body Electrostatic Eliminator/Touching Electrostatic Eliminator Technical indicators 1). The human body electrostatic voltage: V 20KV 2). Static release time: t 100mS 3). The maximum release current: I 0.1mA 4) the environment temperature: 20 5). Environmental humidity: 80% (40) Human Body Electrostatic Eliminator/Touching Electrostatic Eliminator Test conditions and results The human body electrostatic voltage: 18KV environment temperature: 20 â?? The five fingers release time + 0.091s residual voltage -10V The five fingers release time - 0.090s residual voltage -10V Palm release time + 0.084s residual voltage -9V Palm release time - 0.082s residual voltage -9V Electrostatic elimination time conforms to the ESD standard The use and installation methods: just a finger touch the metal ball 0.1s can eliminate the static electricity of the human body. The base type electrostatic elimination ball: first through a screw nut screw at the bottom of the tube on the stainless steel wire, grounding wire with the best of not less than 0.3 square multi strand wires to the ground. No base type electrostatic eliminating ball: the ball electrostatic eliminator ahead buried underground needs at least 400mm, a header body upward, thus completed the installation. Maintenance: Do not enter the debris inside the steel tube, especially metal objects, because there are the original circuit, if the metal circuit does not work.
PVC strech celling film, is a kind of backlit vinyl film. DERFLEX professionally manufacture PVC vinyl film, digital printing media. DERFLEX is professional manufacturer and supplier of� PVC ceiling film. We focus on manufacturing and exploring� backlit vinyl. Soft film ceiling - founded in Switzerland in nineteenth Century and introduced into China in 95, has been introduced into china. This is a kind of interior decoration material which is widely used in recent years. The soft film needs to be measured in the field and produced in the factory. The stability of the soft film size is from -15 degrees Celsius to 45 degrees celsius. Transparent film smallpox can be matched with various lighting systems (such as neon lamp, fluorescent lamp, LED lamp) to create a dreamy, shadowless lighting effect. Main charicteristics of� PVC strech ceiling film: 1, fire prevention function:� soft film smallpox� has met the fire standards of many countries. British BSSTANDARD476, PART 7, CLASS, IY, the United States ASTM, European M1, and national standard CODE NO:2000 1132. The standard of fire protection in China is B1. Simply speaking, ordinary building materials (such as wood, gypsum boards, to metal ceilings), when heated or burned, will spread fire and heat to other locations. However, soft film smallpox after burning, will melt through itself, and in a few seconds to shrink, until leaving the fire, and then stop automatically, and does not emit harmful gases or harm the human body or property under drip solution. Application: *The administration, office buildings, commercial office building. * industrial areas and hospitals, epidemic prevention stations, clinics. * private homes, villas, apartments, bathroom, kitchen. * school, kindergarten, a large lecture hall, computer room, Internet cafes, etc.. * sports venues, swimming pool, gym, billiards room, Volleyball Hall, basketball hall. * The church, hotel lobby, auditorium, restaurant, bar, cafe, music hall. * brand stores: brand clothing stores, 4S stores, jewelry stores, etc.. * public places: shopping malls, theme parks, airports, subway, exchange, museum, art museum, library, art exhibition, beauty salon etc.. * sales offices model rooms, clubs, leisure club etc.. 2, energy-saving features: first, the� printable� vinyl� is in accordance with the movie screen and manufacturing, such as at the surface can be found to have numerous concave lines, and this is the light refraction will strengthen, so we encourage users to install wall lamp or lamp would enhance the effect, this method can reduce the number of light sources. Moreover, the essence of the soft film ceiling is made of PVC material, which can greatly improve the insulation function, and can greatly reduce the indoor temperature loss, especially the place where the air conditioner is often needed. The principle is the same as divers wearing scuba suits to delay the loss of body temperature in seawater. 3, germproof function: because the� backlit vinyl� in the factory has a hybrid called a BIO - PRUF antimicrobial treatment. This trademark has been registered in the United states. And 30 years of experience. The specially treated material resists and prevents microorganisms, such as common molds, from growing on the surface of an object so as to provide an additional protection for ordinary users, especially children, bedrooms, and bathrooms. It is designated by the Hongkong medical association. 4, waterproof function: Water Leakage occurs in the traditional ceiling of the accident, often causing users very embarrassed, but failed to immediately stop Water Leakage, so that the indoor property destroyed; even affect the lower housing is made of soft film smallpox� PVC material film, installation structure with closed design, so when it comes to Water Leakage case, can temporarily supporting the sewage, so that the owners make timely treatment.5, Color:� soft film ceiling, there are many colors, 8 types to choose from, such as dumb light, glossy, suede, metal surface, hole and light transmission surface. All kinds of fabrics have their own features. Among them, the diameter of the hole surface has 1mm, 2mm, 3mm, 4mm, 10mm and other types for designers to choose. 6, creativity: because the� backlit film� is a soft material, is based on the shape of keel to determine its shape. Therefore, the shape is more casual and varied. Let designers be more creative. 7,� easy installation: it can be installed directly on walls, wooden sides, steel structures, plaster walls and wooden walls. Suitable for all kinds of building structures. Moreover, the� PVC flexible film� keel can be uniformly fixed only by screws at a certain distance, and the installation is very convenient. Throughout the installation process, there will be no volatile solvents, no dust, not in the space of other furnishings have an impact, does not affect the normal production, work and life order.8� anti-aging: special keel is divided into PVC and aluminum alloy two kinds of material, the main structure of the soft film is PVC, soft film buckle edge is also made by PVC with several special additives. All of these components can last up to ten years. In the correct installation, the use of the process will not produce cracks, will not decolorization or small pieces fall. 9, safety and environmental protection:� backlit vinyl strech film� in environmental protection has outstanding advantages, it is in full compliance with European and domestic testing standards. All the soft films are made of environmentally friendly materials, without cadmium, ethanol and other harmful substances. Recyclable, in the manufacture, transportation, installation, use, recycling process, will not have any impact on the environment, in full compliance with today\'s environmental issues. 10, acoustics effect: the relevant departments of the relevant testing, proved that this material can effectively improve the room tone effect. Several of these materials are effectively soundproof. It is an ideal soundproof decorative material.
A. WAX/OIL PHASE & WATER VESSEL SPECIFICATIONS Material of construction: Shell 4 mm thk S.S. 316 Top Flange 16 MM THK RING S.S. 316 Top Lid Loose Type in two pieces 16 swg S.S. 316. or top dished as per clients requirement. Jacket S.S. 304. 6 mm thk with spiral stiffeners Insulation 50 mm thk glaswool cladded with with S.S 304 with 16 Swg Welded. Conections 25 NB, bottom valve, Jacket : Steam Inlet , condensate outlet, Jacket Drain with plug, Water Inlet is provided. Legs 40 NB, Heavy Guage S.S. pipe S.S.304. 4 nos. Sensor PT-100 for Digital Indicator. Jacket Pressure 3.5 Kgs.cm.sq working. Stirrer Suitable H.P. /960 R.P.M /440V/TEFC mounted on side or from the bottom of wax vessel & Water vessel. Agitator will be propeller type Finish Internal and all contact parts buffed to 240 grit mirror finish and external bufed to 150 grit matt finish. B) MANUFACTURING VESSEL Material of construction : Shell 6 mm S.S. 316. Bottom Hemispherical 6 mm S.S. 316 Top Dish Type 6 mm Thick S.S. 316. Flanges 16 mm thick S.S. 316 Jacket 6 mm thk SS. 304 with spiral patten Stiffeners . cladded with 16 swg S.S 304 welded. Gasket silicon fitted in groove. Insulation 50 mm Thick Glasswool with 16 swg S.S. 304 cladding welded. Legs 3 nos S.S. pipe heavy guage. Connection Light Glass, Sight glass, Wax inlet, Water Inlet Nozzels Vacuum Manifold with Vacuum Gauge, Vacuum Nozzle and vent Valve, product outlet , bottom full bore ball valve S.S. 316.Jacket steam inlet, condensate outlet, Drain Plug, Cooling water inlet, Cooling Water Outlet, Manifold with safety valve, Pressure gauge etc. Bottom Clearance 500 mm from ground level to valve or as required. Agitator Anchor type S.S. 316 . driven by suitable HP dual rpm motor coupled with gear box. Bearing Housing Angular Roller Bearing 2 Nos Mounted on a Lantern support caldded with S.S. 304 sheet. S.S. 304 guard is provided. Homoginizer Bottom Entry High speed Emulsifier of suitable H.P. /440V/1440 RPM/TEFC Motor. Shaft Seal Mechanical Seal with cooling Arrangement mounted on a conical portion. Sensor PT-100 type will be provided. C) PRODUCT PIPE LINE : Pipe line will cover the following : 1) Water phase vessel to Mixing vessel thru pump 2) Wax phase vessel to Mixing Vessel thru pump & conical filter 3) Mixing Vessel for re-circulation 4) Mixing vessel to Storage Vessel through lobe pump. 5) Storage vessel to hopper of filling machine through transfer pump. All pipe are seamless & electropolished from inside and outside. Fittings are DIN standard with silicon gasket. D) ELECTRIC CONTROL PANEL : It shall consist of a Main isolator b DOL starter for Anchor drive c DOL starter for HSE motor d Machine light switch for main Mixing Vessel e Electrical Digital temperature indicator for all vessel f. Fuses for all motors g. Ammeter for anchor and HSE motors h. Indicating lamps for main ON & OFF with selector switch. i. DOL starters for propeller agitators of Wax & water Phase vessels j. DOL Starters for all the pumps E) PUMPS: CENTRIFUGAL PUMP Rate : 400 Ltrs/Hr MOC : SS 316Q Inlet & Outlet : DIN fitting with T connection at inlet & outlet Above pump is used to transfer wax & water to the main mixing tank. BUMP PUMP : Above pump is used to recirculate final mixed cream for intense mixing & to transfer finished cream from Mixing vessel to storage vessel. Other details are as below. 1) Type : Twin BUMP 2) Design : Sanitary 3) Drive : suitable HP, 200 RPM gearbox & motor 4) Seal : Teflon bush 5) Mounting : Trolley mounted , MOC ? SS304Q 6) Inlet & outlet : DIN fittings / triclover at inlet & outlet. 7) MOC : SS 316Q for contact parts TRANSFER PUMP ? RECIPROCATING TYPE, POSITIVE DISPLACEMENT & METERING TYPE Above pump is used to transfer CREAM/OINTMENT from storage vessel to hopper of filling machine. a) Type : Reciprocating Plunger type b) Capacity : 1000 LtR./Hr c) Drive : suitable HP, 1440 RPM d) Head : 2.5 Mtr. e) Mounting : Trolley mounted , MOC ? SS304Q The above pump doses metered quantity of cream into the hopper of filling machine which suits filling rate of filling machine. There is control feed back system between Filling machine & pump . VACUUM PUMP : Above pump is suitable HP & capacity depending on the capacity of the ointment plant vessel . watering / oilring type with silencer & non return valve. F) STORAGE TANK: The vessel shall be in SS 316Q having cylindrical conical bottom. The vessel will be provided with 40mm ball valve. Shell portion will be flanged from top & bolted to top dish with gasket in bet-ween. All joints are fusion free argon arc welded & inside mirror finished. The vessel will be supported by 4 nos. cladded ?C? class 3? pipe and to maintain 450mm ground clearance. Vessel has 50mm inlet nozzle for finished product entry & vent. G) WORKING PLATFORM : This platform will cover both tanks & with AL dimpled plate and SS counter sunk screw. SS 304 Q railing on either side. There is provision of steps on either side.
Introduction Arlit's stainless steel filter housing lined PTFE series: the housing is made of SUS304 or 316L stainless steel, and the internal filter insert, screw and pressing plate are all made of PTFE. All the parts of the filter interior that come into contact with the liquid are fully lined PTFE to protect the stainless steel housing from corrosion. Liner PTFE filters are primarily used in the following areas: microelectronic chemicals industry, pharmaceutical industry, ultra pure solvent industry and semiconductor industry, among others. The filtration precision is between 0.05�¼m and 5�¼m, and the PTFE material of DAIKIN is used as the lining material. Product Description: Cylinder connection mode: flange Inlet and outlet: flange Shell: SUS304 / 316L Inner wall: PTFE Screw: PTFE Pressure plate: PTFE Support frame: SUS304 Seals: fluororubber, Coated PTFE o-ring encapsulated Technical parameters: Maximum pressure: 12bar Maximum working temperature: 220 â?? Matching filter element interface: 222, 226 Filter specification: Filter capacity: 1 core, 3 core, 5 core, 7 core, 9 core, 11 core, 13 core Filter length: 5 ", 10", 20 ", 30", 40 "
Meank provides rubber coated neodymium pot magnets for sale at good wholesale prices. The rubber-coated pot magnets that act as magnetic bases for mounting & holding are called rubber-coated mounting magnets and rubber-coated holding magnets. The rubber pot magnet(also called rubber-coated round base magnets) are the best strong magnet assemblies, which provide solutions of waterproof and rust-proof magnetic clamping to longer the service life. This rubber-coated neodymium pot magnet can be also made with an internal(female) threaded stud, external(male) threaded stem, and threaded screw socket on one non-magnetic side. Because of the soft rubber coated waterproof magnets, scratches are avoided on the surface of contacted objects. You can use the rubberized magnetic system as a magnetic base on cars and fridges for mounting or holding objects. Normal Types Of Rubber Coated Mounting Magnets rubber-coated mounting magnets can be made with internally threaded stud which suits to rubber coated magnetic hooks and rings rubber-coated mounting magnets can be made with an external threaded stud which suit bolts and screw flat rubber-coated mounting magnets can be made with threaded hole suit for flat surface installation. rubber-coated mounting magnets with handles that used as magnetic tools for various operations.