1. Low voltage cables; 2. Medium voltage cables; 3. High voltage cables; 4. Thermal resistant conductor, low loss conductor; 5. Bare conductor; 6. Fire resistance cables; 7. Building wires
Application field: Coaxial cable, CATV cable, Railway cable, Automotive cable,Consumer electronics,Low votage power cable Size available: 0.08mm-5mm Temper offered: Hard drawn /Annealed Strength offered: Normal strength, High strength Standard: ASTM B566
Product Description Reference standards The product is manufactured according to the standards of CB5023 and Jb8734 or IEC ,BS ,DIN and ICEA upon request. Application The products are suitable for power installation fixed wiring or flexible connection for el-electrical appliances with rated voltage up to and including 450/750V respectively. Operating Characteristics Rated voltage Uo/U:450/750V\300/500Vand300/300V Max. Permissible continuous operating temperature of the conductor: 227 IEC 07(BV-90)..........................90? 227 IEC 08(RV-90)............................90? For other type.................................70? The ambient temperature under installation shall not bellow 10? The bending radius of cable : D=25mm..................................=4D D>25mm..................................?6D (D-Diameter of the cable) Packaging & Shipping In coils, wooden drums, steel drums or steel-wooden drums. We could producing according to the customers' requirements.
The company manufactures: - Wires: a wide range of unipolar wires is used in products. Section goes from 0,09 mm2 to 50 mm2 and they are made of several materials like PVC, Teflon, AWG according to the UL-CSA, silicone with or without glass tubing. - Probes: temperature probes, Reeds or Hall effect wired probes or any kind of required wrapper like threaded bulbs, perforated bulbs, steel, brass, plastic bulbs, die-cast bulbs. The Company can also work on wrappers designed for a dedicated mould. - Power cables: the production also includes power cables with die-cast plugs/sockets of different types: Italy, Schuko, UK, IEC, Australia. - Cables: wirings with multipolar shielded and shieldless cables, for applications like data transmission, power and dynamic uses; standard wirings like Fror, PVC, LIYY, Silicone, Neoprene or custom-made wirings, according to particular applications . - Panelboards, according to customer’s plan. - Assemblings.
Cable pakage for the gsm package, pe insulated jelly filled cable, lan cable, teflon insulated high temprature cables, compensating cable, pvc/xlpe power/ control cables, zero halgen cable, single core cable, pvc/pe insulated copper screened multicore multipair cable, pvc insulated indoor telephone cable, polyurethene sheathed cables, cables for the railway application, rf and coaxial cables, pvc/xlpe insulated steel wire braided multicore cables, special cables as per customer requirements, apart from these we also manufacture mcb's, isolators, distribution boards and mcb changeover switches. Depend on the quantity asked.
Product Description Bare stranded copper conductor. PVC Insulation. PVC jacket. Rated temperature: 70 degrees Celsius Rated Voltage: 300/300V Standard: GB/T 5023.5 Applications Used in general power supply cord.
Looking for a serious buyer of pvc scrap from electrical wires & cable regrind or not regrind Type : regrind/not regrind Color : mixed or separated Quality: natural high grade Purity : 1) 98%, no copper and/or 2) purity: 80%, 10% pe, 10% rubber We can supply 25 mt every month or more. We can send quotations, photos and samples.
We can supply wire extrusion head for insulation structure wire/cables Solid plain Solid skin coloring Solid skin color+stripe Foam Foam skin Foam skin+stripe Skin foam skin Skin foam skin+stripe About us--- kunshan yishida mould machinery co., ltd 1.We are a professional designed&manufacturer of wire extrusion head and extrusion dies 2.We have established in 1998 and has almost 20years experience in this field. 3.We can produce cable diameter range from 0.24mm-200mm 4.We produce hundreds of machine heads, such as free adjustable, adjustable, single-layer, double-layer co-extrusion, three-layer co-extrusion, flat wire, high temperature wire extrusion head.Etc. 5.We have introduced several sets of domestic advanced five-axis cnc machining centers and cnc laths and other professional production exquipments.
Cable and wire products include fiber optic, electrical, and electronic cordage in bare form, not terminated at either end with any type of connector or contact. Included products may have as few as one conductor up to several hundred, and includes microphone and instrument cable, hook-up wire, test lead wire, coaxial cable, flat flex cable, and others.
Our Advantage: 1.Available in 5 ft.and 10ft. lengths; 2.Elector Zinc Plated for a professional look; 3.Full line of accessories are available to mount on the wall,from the ceiling or under he door; 4.Cuts easily with bolt cutter for custom configurations; 5.Cable Trays bolt together to any custom configurations; 6.Stackable Cable Guides available to separate and secure cables in place; 7.Complete line of accessories available. Certificate CE, CUL, ROHS, ISO, SGS Material Q235, SS304, SS316 Surface Finish Electro Zinc,Hot Dipping, Powder Coating Width 50mm, 100mm, 150mm, 200mm, 300mm, 400mm, 600mm, 800mm Height 30mm, 50mm, 100mm, 150mm, 200mm Diameter 4mm, 5mm, 6mm Length 3000mm Application Data Center, Communication Room, Financial Industry Room, Government Office and so on...
Brief Introduction of Wire Mesh Cable Tray Systems: These are thicker and therefore stronger than apparently similar products. Cablofil incorporates a unique T welded safety edge resulting in performance comparable with traditional cable tray but with many added benefits. Features and Benefits of Wire Mesh Cable Trays: 1. Electroplated Zinc Finish 2. Fast Easy Installation 3. Mesh Design Allows Cable Exit or Entry at any point 4. Clear Cable Identification 5. Supplied in 3 Metre Lengths 6. Significant Cost Savings Compared to Standard Tray Products 7. Simple Creation of Fittings on Site 8. Wide Range of Sizes 9. Heights Shown are Internal Dimensions Manufacturing: Optional Material for wire mesh cable tray: Black Steel, Stainless Steel, Aluminium, Alloy, Fibreglass Reinforced Plastic (FRP) Mode: Top curved / Top Straight Surface Finish: Zinc-plating, Hot-dip Galvanizing (HDG), Powder-coated, Pickled & Passivated. Color: Optional Suggestions: 1). MATERIAL The choice of materials is a matter of the physical and mechanical properties produced by each, compared against the intended function, as well as the environment, in which the trays are to be installed. 2). SURFACE FINISH: A). Zinc-plating cable trays are suitable for indoor use. The place where cold zinc-plating cable trays would work should be dry, ventilated, and corrosion free. B). Hot-dip Galvanizing (HDG) cable trays are not suggested for wire mesh cable trays. C). Powder-coated cable trays should be carried out in alkali and salt corrosion free site. D). Pickled & Passivated should be used to stainless steel wire trays. Specification for power and communications cabling containment. 1). SCOPE Steel Wire Cable Tray conforming to the material and performance of this specification. 2). GENERAL A). Cable tray shall be manufactured from steel wires, welded together and bent into final shape prior to surface treatment. B). Surface Treatments: i). Electro zinc plated to BSEN 12329-2000 for interior use (level 2) ii). Hot Dipped Galvanised with between 60 and 80 microns of zinc to BS 729. iii). Stainless Steel AFNOREZ CND 17.2 (AISI 316L) C). Steel Wire Cable Tray Widths & Depths i). Cable Tray dimensions are all internal. ii). Depths of 30mm, 54mm, 80mm, 105mm & 150mm iii). Widths of 50mm, 100mm, 150mm, 200mm, 300mm, 400mm 450mm, 500mm & 600mm for depths of 30mm & 54mm. iv). Widths of 100mm, 150mm, 200mm, 300mm 400mm & 500mm for Depths of 105mm & 150mm All trays are of 3005mm long 3). SPECIFICATION a). Steel Wire Cable Tray will be produced from lateral and longitudinal sidewall steel wires, with minimum diameters of -: 4 mm for trays of widths up to 150mm 4.5 mm for trays of widths of 200mm 5.0 mm for trays of widths of 300mm 6.0 mm for trays of widths of 400mm, 450mm, 500mm and 600mm b). Trays will be manufactured with a longitudinal 'T-welded' safety edge along the top wire of the sidewall (excluding CF3050) c). Trays will be constructed with a 50mm x 100mm mesh configuration. d). All tray fittings (e.g. changes in direction, level and size) shall be constructed on site, to the manufacturers instructions, using side action bolt croppers and fastened using 25mm and 30mm counter clamps with M6 bolts and nuts, all surface treated as the tray. e). Trays will be coupled together using either a fast spring coupler or a 25mm/30mm counter clamp combination with supporting lateral splice plate on trays over 300mm width. The coupling will have the same surface finish as the tray. f). Trays shall be supported at a maximum span of 2.5m by trapeze, wall, floor or channel mounting methods and will not exceed maximum loads as specified by the manufacturer. g). All welds will be manufactured to an average minimum tensile strength of 500Kg per weld. 4. TESTS, CERTIFICATION AND CONFORMITY a). Loading and deflection characteristics of the tray should be tested and the results published in accordance with the European Standard CEI/61537. b). Suitability for the support of Cat6 data cabling should be demonstrated by way of independent test verification. c). Fire test certification should be published in accordance with the E30/E90 standard. d). Electrical continuity across a coupling should be demonstrated by means of a published test method and result. We are able to design styles in various specifications according to the drawings and/or samples by the clients. And we offer fair price, excellent quality, quick delivery, continuous improvement. We own customer satisfaction. You can trust on us that we are the leading manufacturer of cable trays. PSC
Electrical wire and cable
Wire Mesh Cable Tray provides A job site, field adaptable support system primarily for low voltage, telecommunication and fiber optic cables. These systems are typically steel wire mesh, zinc plated. standard widths of 2, 4, 6, 8, 12, 16, 18, 20, and 24 inches standard depths of 1, 2, and 4 inches standard length of about 10 feet (118) Wire Mesh tray is generally used for telecommunication and fiber optic applications and are installed on short support spans, 4 to 8 feet.
TECHNICAL DATE Nominal Voltage:500V Temperature Range:-60C~+200C Conductor: stranded tinned copper Insulator: silicone rubber+fiberglass braided O.D.Tolerance:�±0.05mm Testing Volta:2000V Colour: white, blue, red, black, brown, orange, purple, gray, yellow, green, yellow-green, etc. CHARACTERISTIC RoHs compliance, high temperature resistance, low temperature resistance, high voltage resistance, aging resistance, excellent electrical resistance property, excellent chemical property, etc. APPLICATION Apply to household appliance, illumination & lighting & headlamp, electronic equipment, electric machines, temperature sendsor, aircraft, aviation, military series, metallurgy chemical series, motor cars & ships, electric heating products, electrical installation, etc.
Product Name: Fine Aluminum Hydroxide Product Type: PF-1 Product Properties: PF-1 product has low electrolyte content, narrow particle-size distribution, low oil absorption, high whiteness (low impurities and organics, the invention patent owned by Pengfeng, One Producing Method of High Whiteness Aluminum Hydroxide Filler-Patent code: ZL 2013 1 0162126.4), high extrusion speed. As functional filler PF-1 can be used to enhance your product flame retardancy and smoke suppression function. PF-1 mainly used in wire and cable, fiber optical cable and other fields. Typical Analysis: Al(OH)3-content [%] 99.6 SiO2 [%] 0.02 Fe2O3 [%] 0.02 Na2O(total) [%] 0.30 Na2O(soluble) [%] 0.01 Free moisture [%] 0.30 Particle size (Laser diffraction) D50(μm) 1.0-2.0 Bulk density kg/m3 300-350 Oil absorption ml/100g 28 Whiteness (Elrepho 457nm) [%] 97 Electrical conductivity μs/cm 60 Refractive index 1.58 Mohs hardness 3 Applications: Wire and Cable Rubber Application Thermoplastic Material Thermosetting Material Coating, industrial paper Other area
Product Name: Fine Aluminum Hydroxide Product Type: H-WF-1 Product Properties: H-WF-1 product has low electrolyte content, narrow particle-size distribution, low oil absorption, high whiteness (low impurities and organics, the invention patent owned by Pengfeng, One Producing Method of High Whiteness Aluminum Hydroxide Filler-Patent code: ZL 2013 1 0162126.4), high extrusion speed. As functional filler H-WF-1 can be used to enhance your product flame retardancy and smoke suppression function. H-WF-1 mainly used in wire and cable, fiber optical cable and other fields. Typical Analysis: Al(OH)3-content [%] 99.6 SiO2 [%] 0.02 Fe2O3 [%] 0.02 Na2O(total) [%] 0.30 Na2O(soluble) [%] 0.01 Loss on ignition [%] 34.5±0.5 Free moisture [%] 0.30 Particle size (Laser diffraction) D50(μm) 1.0-2.0 Bulk density kg/m3 300-350 Oil absorption ml/100g 28 Whiteness (Elrepho 457nm) [%] 97 Electrical conductivity μs/cm 60 Refractive index 1.58 Mohs hardness 3 Applications: Wire and Cable Rubber Application Thermoplastic Material Thermosetting Material Coating, industrial paper Other area Disclaim: Information presented here is believed to be accurate and reliable but is not intended to meet any specification and does not imply any guarantee or warranty. All data listed here are reference values and subject to production tolerances. These values are only for the product description and no guarantee is placed on the properties. It remains the responsibility of the users to test the suitability of the product for their application.
pplication field: Telephone drop wire, Coaxial cable, CATV cable, Tracer wire, Railway cable, Automotive cable,Consumer electronics Size available: 0.06mm-6.54mm Temper offered: Hard drawn /Annealed Strength offered: Low carbon, High strength, Extra high strength. Standard: ASTM B227
Application field: Telephone drop wire, Coaxial cable, CATV cable, Tracer wire, Railway cable, Automotive cable,Consumer electronics Size available: 0.06mm-6.54mm Temper offered: Hard drawn /Annealed Strength offered: Low carbon, High strength, Extra high strength. Standard: ASTM B227
pplication field: Telephone drop wire, Coaxial cable, CATV cable, Tracer wire, Railway cable, Automotive cable,Consumer electronics Size available: 0.06mm-6.54mm Temper offered: Hard drawn /Annealed Strength offered: Low carbon, High strength, Extra high strength. Standard: ASTM B227
pplication field: Telephone drop wire, Coaxial cable, CATV cable, Tracer wire, Railway cable, Automotive cable,Consumer electronics Size available: 0.06mm-6.54mm Temper offered: Hard drawn /Annealed Strength offered: Low carbon, High strength, Extra high strength. Standard: ASTM B227
