Product Description Standard The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA, and JIS upon request. Application The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV Operating characteristics Rated power-frequency voltage Uo/U: 0.6/1kV Max. Permissible continuous operating temperature of conductor(PVC/XLPE):70?/90? Max. Short-circuit temperature of conductor shall not exceed(5s maximumduration): PVC: cross-section of conductor=300mm2-160? cross-section of conductor=300mm2-160? XLEP:250? The ambient temperature under installation should not below 0? The bending radius of a single-core cable should not less than 20 times of the cable diameter. The bending radius of multi-core cable should not less than 15 times of the cable diameter. Packaging & Shipping In coils, wooden drums, steel drums or steel-wooden drums. We could producing according to the customers' requirements.
Product Description Standard The product is manufactured according to the standard of GB9930 ”Polyvingyl chloride insulated control cable”, IEC60502 “Extruded solid dielectric insulated power cables for rated voltages from 1 kV up to 30kV”. Applications PVC insulated and sheathed control cable is suitable to the interconnection in controlling, signalling, protecting and measuring systems with rated voltages up to and including 450/750V or 0.6/1kV. Operating characteristics 1. Rated power-frequency voltage Uo/U: 450/750V or 0.6/1kV. 2. Max. Permissible temperature operating temperature of conductor: 70? 3. The ambient temperature under installation should not below 0?, if the ambient temperature is lower than 0?, the cable should be preheated. 4. The bending radius of cable are recommended as follows: Non-armoured cable: not less than 6 times of the cable diameter. Armoured or copper tape screened cable: not less than 12 times of the cable diameter. Screened fiexible cable less than 6 times of the cable diameter. Packaging & Shipping In coils, wooden drums, steel drums or steel-wooden drums. We could producing according to the customers' requirements.
Product Description Standard The product is manufactured according to the standard of GB14049”Aerial insulated cables of rated voltages 10KV and 35KV” and IEC60502”Extruded solid dielectric power cables for rated voltage form 1KV to 30KV”. Operating characteristic Rated voltage: 10KV 35KV Max.permissible continuous temperature: HDPE insulated aerial cables :75du. XLPE insulated aerial cables: 90du. Max.short-circuit temperature of the conductor should not exceed: HDPE insulated aerial cables :150du. XLPE insulated aerial cables: 250du. The installation ambient temperature should no below: -20du. The bending radius of cables are recommend as follows: Single cable:not less than 20 times the diameter of cables; Multi-core cable:not less than 15 times the diameter of cables. Packaging & Shipping In coils, wooden drums, steel drums or steel-wooden drums. We could producing according to the customers' requirements.
Product Description Reference standards The product is manufactured according to the standards of CB5023 and Jb8734 or IEC ,BS ,DIN and ICEA upon request. Application The products are suitable for power installation fixed wiring or flexible connection for el-electrical appliances with rated voltage up to and including 450/750V respectively. Operating Characteristics Rated voltage Uo/U:450/750V\300/500Vand300/300V Max. Permissible continuous operating temperature of the conductor: 227 IEC 07(BV-90)..........................90? 227 IEC 08(RV-90)............................90? For other type.................................70? The ambient temperature under installation shall not bellow 10? The bending radius of cable : D=25mm..................................=4D D>25mm..................................?6D (D-Diameter of the cable) Packaging & Shipping In coils, wooden drums, steel drums or steel-wooden drums. We could producing according to the customers' requirements.
The electric vehicle charging cable is used to connect the electric vehicle charging device and charging infrastructure, so as to carry out power transmission for electric vehicles, and is equipped with a certain number of signal lines, control lines, power auxiliary lines, etc., to ensure accurate control and safe operation of the whole charging process. Charging cable is generally used in charging station, parking lot, hotel, residential area, garage and other areas, portable charging cable can be placed in the car. Hualin electric vehicle charging cables are designed and produced according to TuV Rheinland technical standards. Hualin Cable's electric vehicle charging cable products have the following advantages: soft, feel good, bending radius is less than 5D; Oil resistance, acid and alkali resistance, water resistance, wear resistance, rolling resistance, cracking resistance, UV resistance, color stability; Good flame retardant performance; Bending resistance more than 50000 times; All materials comply with RoHS&REACH latest environmental standards. Charging cables are generally used in charging stations, parking lots, hotels, residential areas, garages and other areas.
Control Cable are PVC insulation, XLPE insulation, fluoroplastic Insulation materials, different materials such as silicone rubber insulation performance cable products for In power stations, substations, factories, petrochemical, and other companies controlled remotely controlled loop, as the connection between the lines of various types of electrical instrumentation and automation devices, from the role of the various power or signal transmission, so that the entire electrical system safe, Reliable operation. Control cable is suitable for power station, substation, factory and petrochemical industry.
Application :- The XLPE (Cross Link Poly Ethylene) Power Cables are used under ground as well as over head transmission of power in power plants, industries, projects and all other electrical installations. Features :- Manufactured from bright annealed 99.97% pure bare copper & aluminum conductors. These cables are insulated with XLPE compound. Taped/Extruded inner sheath. Round steel wire / flat galvanised steel grip armoured. The outer sheaths can be PVC, HR PVC, FRLS or FR depending upon the application and requirement. Technical Advantage of XLPE Insulation :- Higher current rating, higher short circuit rating (approx 1.2 times that of PVC), thermosetting in nature, higher insulation resistance (1000 times more than PVC cables), higher moisture resistance, better resistance to surge currents, low dielectric losses, better resistance to chemicals and corrosion, longer service life. Comparatively higher cable operating temperature 90�°C and short circuit temperature 250�°C. Technical Data :- Working Voltage : Up to 1100 V Temperature Range : -15�°C to +90�°C Power Cable Sizes : 1.50 Sq. mm to 400.00 Sq. mm in 2, 3, 3 Copper Control Cable Sizes : 1.50 Sq. mm, 2.50 Sq. mm up to 24 cores. Color Codes : 2 Core Cables - Red, Black 3 Core Cables - Red, Yellow & Blue 3 Core Cables - Red, Yellow, Blue & Black (for Neutral) 4 Core Cables - Red, Yellow, Blue & Black 5 Core Cables - Red, Yellow, Blue, Black & Grey 6 Core Cables & above - Adjacent cores are blue for reference and yellow for direction in each lay Black outer sheath Specification : IS:7098 (Part-1) Packing : 500 / 1000 meters on drums
Application :- The Power Cables are used under ground as well as over head transmission of power in power plants, industries, projects and all other electrical installations. Features :- Manufactured from bright annealed 99.97% pure bare copper & aluminum conductors. These cables are insulated with PVC compound. Taped/Extruded inner sheath. Round steel wire / flat galvanised steel grip armoured. The inner & outer sheaths can be PVC, HR PVC, FRLS, HR-FRLS or FR depending upon the application and requirement. Technical Data :- Working Voltage : Up to 1100 V Temperature Range : -15�°C to +70�°C or +85�°C in HR PVC Power Cable Sizes : 1.50 Sq. mm to 400.00 Sq. mm in 2, 3, 3 & 4 core. Copper Control Cable Sizes : 1.50 Sq. mm, 2.50 Sq. mm up to 24 cores. Color Codes : 2 Core Cables - Red, Black 3 Core Cables - Red, Yellow & Blue 3 Core Cables - Red, Yellow, Blue & Black (for Neutral) 4 Core Cables - Red, Yellow, Blue & Black 5 Core Cables - Red, Yellow, Blue, Black & Grey 6 Core Cables & above - Adjacent cores are blue for reference and yellow for direction in each lay Black outer sheath Specification : IS:1554 (Part-1) Packing : 500 / 1000 meters on drums
Brand new cable produces by Prysmian Group.
