Sintered Stainless Steel Filters Suppliers and Manufacturers

The stainless steel pleated filter cartridge is a type of filter cartridge that uses single or multiple layers of stainless steel woven mesh as the main filter material. The sealing surface of the filter element adopts an argon arc welding process, and the filter layer is processed by folding 3-5 layers of stainless steel mesh. The filter layer is supported and reinforced by two layers of mesh on the inside and outside, with the actual filtering layer in the middle. The seams are welded using argon arc welding to form a complete filter cartridge that does not leak or allow any medium to pass through. The filter material used is stainless steel woven mesh, which is made of stainless steel wire of different diameters woven to different mesh sizes. The pleating creates a larger surface area for the filter, allowing it to trap more particles and contaminants than a flat filter of the same size. Parameter: Material: SS304 or SS316 Filtration Accuracy: 1 - 200 microns Size: Customized Operating temperature: 650 Features: Filtration efficiency: Pleated stainless steel filters offer high filtration efficiency due to their large surface area and multiple layers of mesh. They can remove a wide range of contaminants from liquids and gases, including particles, debris, and sediment. Durability: Stainless steel is highly durable and corrosion-resistant, making pleated stainless steel filters suitable for use in harsh environments, such as chemical processing plants and oil and gas refineries. Customization: Pleated stainless steel filters can be customized to meet specific filtration requirements. They can be designed with different sizes, shapes, and micron ratings to suit different applications. Temperature and pressure resistance: Stainless steel is capable of withstanding high temperatures and pressures, making pleated stainless steel filters ideal for use in a wide range of industrial applications. Reusability: Pleated stainless steel filters are reusable and can be cleaned and reused multiple times, making them a cost-effective and environmentally friendly filtration solution. Applications: Oil and gas industry: Pleated stainless steel filters are used to remove contaminants from oil and gas during production, refining, and transportation. Food and beverage industry: Pleated stainless steel filters are used to filter liquids and gases in food and beverage production, ensuring product quality and safety. Chemical processing industry: Pleated stainless steel filters are used to remove contaminants from chemicals and solvents during production and processing. Pharmaceutical industry: Pleated stainless steel filters are used to filter liquids and gases in pharmaceutical production, ensuring high product purity and quality. Water treatment industry: Pleated stainless steel filters are used to remove contaminants from water in water treatment plants and other applications.

The stainless steel filter element is a kind of filter material with high strength and overall rigidity, which is made of multi-layer metal sintered mesh, which is made of multi-layer stainless steel mesh after special laminated pressing and vacuum sintering. The pores are interlaced to form a uniform and ideal filtration structure. The stainless steel pleated filter element is folded by special stainless steel wire mesh. The pleated process makes the filter element have a large filtration area, high dirt holding capacity and high flow rate. Each seal adopts argon arc welding process, no leakage, and can be used in high temperature and high pressure filtration environment. The stainless steel filter element has excellent performance, and the filter element can be cleaned repeatedly. Products Parameters Main filter material: SS316 SS304 SS316L SS304L Main filter media: stainless steel fiber sintered felt and stainless steel woven mesh Regular outer diameter: 25 30 35 50 60 63.5 65 100 150mm (customized) Regular inner diameter: 25 30 35 50 100 150mm (customized) Length: Generally 5", 10", 20", 30", 40" (customized) Interface form: 222 226 215 M36 M28 M24 M22 M20 threaded interface Maximum working temperature: 500 Filtration accuracy: 1-200um Working strength: 0.1-30MPa Processing: The sealing surfaces of the filter element are joined by argon arc welding process, and the filter layer adopts multi-fold folding process to form a complete filter element without leakage and medium shedding. Features 1. The precision filter element made of stainless steel has high porosity, excellent air permeability, low resistance, and low pressure difference; 2. The stainless steel precision filter element's filter area and dirt-holding capability are both substantial after folding; 3. The high temperature resistance, corrosion resistance, and suitability of the stainless steel precision filter element for high viscosity liquid filtering; 4.Effective renewal; 5.All-stainless steel construction; broad chemical compatibility; 6.6. Reusable after chemical, high temperature, and ultrasonic cleaning. Applications Environmental protection, petroleum, chemical, medical, high temperature gas filtration, scientific research, metallurgy, food, machinery, and other sectors use stainless steel pleated filter elements extensively. 1. Filtration of various high temperature and corrosive liquids in the petroleum and chemical sectors; 2. Filtration and purification of various polymer melts in the chemical fiber and film industries; 3. Thorough filtration for mechanical equipment of different hydraulic oils and lubricating oils; 4. In the pharmaceutical, biological, beverage, and other sectors, the clarification and filtration of various liquids.

In pneumatic systems and air discharge equipment, noise can be a significant concern, affecting both productivity and comfort. To address this issue, the 5 micron M10 thread air muffler has emerged as a reliable solution. Crafted from sintered stainless steel, this innovative product effectively reduces noise while allowing airflow to pass through. Its exceptional performance at high temperatures and pressures, combined with its easy installation and maintenance, make it an ideal choice for various applications. Parameters Material: 316L Size: Dia 14*30mm Length Pore size: 5 micron Interface: M10*1.5 Features Effective Noise Reduction: The muffler significantly reduces noise levels in pneumatic systems and air discharge equipment, creating a quieter working environment. Unobstructed Airflow: Designed to allow the passage of airflow, the muffler does not hinder system performance while reducing noise transmission. High-Temperature and High-Pressure Resistance: The sintered stainless steel construction ensures the muffler maintains its shape and functionality even under extreme conditions. Easy Installation and Maintenance: The muffler's direct installation capability simplifies the integration process, while its easy-clean design minimizes maintenance efforts. Applications Pneumatic Tools: The air muffler is ideal for reducing noise generated by pneumatic tools, enhancing workplace safety and comfort. Air Compressors: By installing the muffler on air compressors, noise levels can be effectively reduced, creating a quieter working environment. HVAC Systems: The muffler helps minimize noise in heating, ventilation, and air conditioning (HVAC) systems, providing a more comfortable indoor environment. Industrial Machinery: The muffler can be employed in various industrial machinery, reducing noise pollution and improving worker well-being. Automotive Manufacturing: Applied in automotive manufacturing processes, the muffler reduces noise generated by air discharge equipment, ensuring a quieter production environment.

The stainless steel filter is a type of metal porous filter element made from industrial metal powder, typically 304 or 316L. The raw material is formed through cold isostatic pressing and then sintered under high temperature and high vacuum conditions. The resulting filter element contains countless micropores that are curved, criss-crossed, and highly precise, allowing for deep-level precision filtration through pressurization. Product parameters Outer diameter: 20 100mm Length: 100 1500mm (more than 1500mm can be welded) Filtration accuracy: 0.5um 50um Porosity: 35-45% Features Here are four key features of the stainless steel filter: 1.Precise and uniform porosity: The stainless steel filter boasts highly accurate and uniform porosity, which ensures precision in filtration. The countless micropores inside the filter are curved, criss-crossed, and highly precise, allowing for deep-level precision filtration through pressurization. 2.Excellent mechanical properties: The filter has excellent mechanical properties, including impact resistance and alternating load. It has a stable shape with low resistance to filtration, enabling high permeability. 3.High-temperature resistance: The stainless steel filter has a high temperature resistance of up to 600, making it suitable for use in high-temperature environments. It exhibits a stable separation effect, and its good chemical stability provides high resistance to corrosion at high temperatures. 4.Easy to regenerate: The filter is easy to regenerate, enabling simple reverse cleaning and ensuring an extended service life. It is easy to weld, with seamless welding lengths of up to 1500mm, and the filter is highly versatile, making it suitable for use in a wide variety of applications. Application With its unique porous technology, stainless steel filters are widely used across a range of industries, including the petrochemical, coal chemical, pharmaceutical, water treatment, food, metallurgical, and gas purification fields. The filter is a new type of filtration and separation technology material that can be used for various applications, such as terminal filtration of petroleum products, fly ash filtration in the coal chemical industry, impurity removal and filtration of raw materials in the pharmaceutical and chemical industry, water purification, and filtration after ozone sterilization in the water treatment industry, and clarification and filtration of milk, beverages, beer, mineral water, and vegetable oil in the food industry. Processing: The production process of stainless steel filters involves monitoring all raw materials, including the metallurgical composition, particle size distribution, and bulk ratio of the metal powder. After being formed through cold isostatic pressing, the filter is sintered at high temperature and high vacuum.

Stainless steel pleated filters cartridge is a type of filter element that is made from stainless steel and designed with a pleated structure. The pleats increase the surface area of the filter, which provides more capacity for capturing contaminants.  Stainless steel pleated filter cartridge is known for their high strength, durability, and resistance to heat and corrosion. They are commonly used in industrial applications where high-performance filters are required for filtering fluids and gases.  parameters Material:stainless steel304, 304L, 304HC, 316, 316L, 321, 430 or as per you request. Filter rating 1-300 microns Flow rate: 80-200l/min Working pressure:1.5 bar-250 bar Working medium:The common polymer industrial, included rubber, plastic, liquid emulsion,etc. Working temperature: 600 Features 1.High Strength Against High Differential Pressures: These filters can withstand high differential pressures without loss of their filtration efficiency or structural integrity. 2.Large Surface and Filtration Area: The pleated design of these filters results in more pleats in the stainless steel filter, which means a larger surface and filtration area. This provides a greater ability to capture contaminants. 3.Washable and Reusable: The stainless steel filter element is washable and reusable, which prolongs its service life and reduces the frequency of filter replacement. This saves money and reduces waste. 4.Excellent Heat and Corrosion Resistance: These filters are highly resistant to heat and corrosion, making them suitable for use in harsh environments where other filters may fail. Applications Oil and gas production: are used in the oil and gas industry to filter out contaminants from crude oil, natural gas, and other fluids. Chemical processing: These filters are used in chemical processing to remove impurities from chemicals and solvents. Water treatment: are used in water treatment plants to remove sediment, debris, and other contaminants from the water supply. Food and beverage production: These filters are used in the food and beverage industry to filter out impurities and ensure product quality. Pharmaceutical production: are used in the pharmaceutical industry to filter out contaminants and ensure product purity. Automotive and aerospace industries: These filters are used in the automotive and aerospace industries to filter out contaminants from hydraulic fluid, lubricating oil, and other fluids used in machinery. Industrial air filtration: are used for industrial air filtration to remove dust, smoke, and other airborne contaminants from the air.

Product Introduction In bioreactor systems, achieving optimal mass transfer of gases such as oxygen or carbon dioxide can be challenging. This is particularly true for oxygen, which is poorly soluble in water and even less so in cell culture and fermentation broths. While agitation is commonly used to mix nutrients and ensure homogeneity of the cell culture or fermentation, there are limits to agitation speed due to high power consumption and potential damage to organisms resulting from excessive tip speed. Agitation alone is insufficient for achieving adequate mass transfer. However, by incorporating a porous metal sparger, mass transfer rates can be significantly increased in this type of equipment. Optimal mass transfer rates can be accomplished by introducing gases into stirred or unstirred reactor vessels via millions of small bubbles, which expands the gas-to-liquid contact surfaces. Parameter Pore size: 0.2-100 microns Dia: 5-300mm Length: 10-1000mm Porosity: 30-50% Operating temperature: up to 600C Maximum pressure: up to 10 bar

Product Introduction Stainless steel pleated filters cartridge is a type offilter elementthat is made from stainless steel and designed with a pleated structure. The pleats increase the surface area of the filter, which provides more capacity for capturing contaminants. Stainless steel pleated filter cartridge is known for their high strength, durability, and resistance to heat and corrosion. They are commonly used in industrial applications where high-performance filters are required for filtering fluids and gases. parameters Material:stainless steel304, 304L, 304HC, 316, 316L, 321, 430 or as per you request. Filter rating 1-300 microns Flow rate: 80-200l/min Working pressure:1.5 bar-250 bar Working medium:The common polymer industrial, included rubber, plastic, liquid emulsion,etc. Working temperature: 600 Features 1. High Strength Against High Differential Pressures 2. Large Surface and Filtration Area 3. Washable and Reusable 4. Excellent Heat and Corrosion Resistance

TOPTITECH offers high-quality stainless steel filter tubes made with metal powder such as 316L or 304 stainless steel. The sintered porous metal tube is produced through uniaxial compaction of powder in a rigid tool with the negative shape of the part and then sintered. Our sintered metal tubes can be customized to meet various applications and specifications. The tubes can be designed with different inner and outer diameters, heights, and apertures. Additionally, they can be designed for welding with stainless steel housings, making it easy to customize the diameter, aperture, thickness, alloys, and media grades. Parameters Material: Stainless steel Tube diameter: 0.5-500mm Wall thickness: 0.3-30mm Length: Customized Filtration rating: 0.5-100 microns Features High durability: Stainless steel filter tubes are highly resistant to corrosion and can withstand harsh operating conditions. Efficient filtration: The porous structure of stainless steel filter tubes allows for efficient filtration and separation of different materials, leading to high-quality and consistent results. High temperature resistance: Stainless steel filter tubes can withstand high temperatures, making them suitable for use in high-temperature applications. Easy to clean: Stainless steel filter tubes are easy to clean and maintain, allowing for long-term use and cost savings. Applications Water treatment: Stainless steel filter tubes are used in various water treatment applications, such as filtration, purification, and desalination. The tubes can effectively remove impurities and contaminants from water, leading to clean and safe drinking water. Oil and gas industry: Stainless steel filter tubes are used in the oil and gas industry for filtration and separation of oil, gas, and other fluids. The tubes can effectively remove impurities and contaminants from fluids, leading to improved performance and efficiency of equipment. Chemical industry: Stainless steel filter tubes are used in the chemical industry for filtration and separation of different chemicals and compounds. The tubes can effectively remove impurities and contaminants from chemical products, leading to high-quality and consistent results. Food and beverage industry: Stainless steel filter tubes are used in the food and beverage industry for filtration and separation of different products, such as juices, wines, and beers. The tubes can effectively remove impurities and contaminants from food and beverage products, leading to improved quality and taste. Pharmaceutical industry: Stainless steel filter tubes are used in the pharmaceutical industry for filtration and separation of different drugs and compounds. The tubes can effectively remove impurities and contaminants from pharmaceutical products, leading to high-quality and safe products.

Product Introduction The stainless steel pleated filter cartridge is a type of filter cartridge that uses single or multiple layers of stainless steel woven mesh as the main filter material. The sealing surface of the filter element adopts an argon arc welding process, and the filter layer is processed by folding 3-5 layers of stainless steel mesh. The filter layer is supported and reinforced by two layers of mesh on the inside and outside, with the actual filtering layer in the middle. The seams are welded using argon arc welding to form a complete filter cartridge that does not leak or allow any medium to pass through. The filter material used is stainless steel woven mesh, which is made of stainless steel wire of different diameters woven to different mesh sizes. The pleating creates a larger surface area for the filter, allowing it to trap more particles and contaminants than a flat filter of the same size. Parameter: Material: SS304 or SS316 Filtration Accuracy: 1 - 200 microns Size: Customized Operating temperature:â?¤650â?? Features: Filtration efficiency: Pleated stainless steel filters offer high filtration efficiency due to their large surface area and multiple layers of mesh. They can remove a wide range of contaminants from liquids and gases, including particles, debris, and sediment. Durability: Stainless steel is highly durable and corrosion-resistant, making pleated stainless steel filters suitable for use in harsh environments, such as chemical processing plants and oil and gas refineries. Customization: Pleated stainless steel filters can be customized to meet specific filtration requirements. They can be designed with different sizes, shapes, and micron ratings to suit different applications. Temperature and pressure resistance: Stainless steel is capable of withstanding high temperatures and pressures, making pleated stainless steel filters ideal for use in a wide range of industrial applications. Reusability: Pleated stainless steel filters are reusable and can be cleaned and reused multiple times, making them a cost-effective and environmentally friendly filtration solution.

1.Properties of stainless steel sintered porous materials 1)High temperature resistance, in normal use under 500 . 2)High mechanical strength, good plasticity, can be machined. 3)Corrosion resistance, oxidation resistance, can be used in nitric acid, sulfuric acid, dilute hydrochloric acid (5%), acetic acid, liquid hydrogen, liquid nitrogen environment. 4)Good molding process, according to customer drawings for processing a molding. 5)High filtration precision and good purification effect. 6)The pores are uniform, the internal structure is stable, and no particles fall off. 7)Good air permeability, easy to back blow cleaning, can be used repeatedly online regeneration. 8)Wear resistance and impact resistance, good mechanical properties. 2.Application of stainless steel sintered porous materials According to its physical and structural characteristics, stainless steel sintered porous materials are mostly used in the fields of noise elimination, filtration and separation, fluid distribution, flow limiting, capillary core and so on. 1)Chemical raw material production process in addition to impurity filtration, material decarburization filtration and fine filtration. 2)Ultrafiltration, RO, EDI system security filtration in water treatment. 3)Food and beverage industry finished product clarification filtration. 4)Filtration and recovery of precious metal catalyst in petrochemical industry. 5)Precision filtration of liquid raw materials, products and pharmaceutical intermediates in the chemical industry. 6)Reverse osmosis security filtration in the field of water injection filtration. 7)Gas purification of steam, compressed air deoiling purification. 8)Medium purification and flow limitation for pneumatic components, lubricants, fuels and hydraulic pressure systems. 9)Chemical dye industry of high - temperature decarburization.