FH SERIES OF PRODUCTS: FH products are Pure nonionic derived the endosperm of guar polysaccharide (Cyamopsos tetragonolobus). The products are unique with ultra-high viscosity with fastest hydration characteristics as shown in Figure 1 below. Also, when added with other drilling components, to seawater, a KCl solution or other aqueous system, the product suspension disperses readily without lumping, even under low-shear conditions generating most of its full viscosity within just a few minutes. PRODUCT COMPATIBILITY: FH series of products are compatible with most of the chemicals and auxiliaries used in drilling operations. However, the products are not compatible with Arabic and Crystal gums. Also, in presence of borates they form elastic gel. PRODUCT APPLICATIONS: FH series of products are natural, high viscosity, fast hydrating non-Newtonian hydrocolloids with suitable cross linking components in diesel slurries and are versatile for continuous mix applications, where extremely fast hydration and subsequent viscosity development is required. They are excellent viscosifiers, stabilizers, thickeners and suspending agent for use in oil-drilling, workover fluids and several other oilfield applications like hydraulic fracturing, oil well stimulation, mud drilling, oil well capping, flocculent and liquid shoring etc. The product is used as a surfactant; synthetic polymer and deformer ideally suited for all rheological requirements of water based and brine based drilling fluids. Specifications:- PRODUCT : FH-35 FH-38 FH-42 CAS No. : 9000-30-0 9000-30-0 9000-30-0 Granulation : FINE FINE FINE APPEARANCE : OFF WHITE POWDER MOISTURE : 8% Max. 8% Max. 8% Max. PROTEIN (N X 6.25) : 5.0% Max 5.0% Max 5.0% Max ASH : 1.5% Max. 1.5% Max. 1.5% Max. ACID INSOLUBLE RESIDUE (A.I.R.) : 3% Max. 3% Max. 3% Max. CARBOHYDRATE (incl gum by difference) : 82% Min 82% Min 82% Min pH (1% Solution) : 5.5 ? 6.5 5.5 ? 6.5 5.5 ? 6.5 VISCOSITY : (0.48% Product in 2% KCL Sol. 2.5 mins mix @1500 RPM in waring blender) Fann 35sa Viscometer at 300 RPM, 25�C 3 Mins : 35 3 Min:38 3 Mins : 42 5 Mins : 37 5 Mins : 39 5 Mins : 43 30 Mins : 39 30 Mins : 42 30 Mins : 45 60 Mins : 40 60 Mins : 43 60 Mins : 47
During last decade Guar has immerged as an important industrial raw material and Produced by man for thousands of years. India has been the single largest producer and exporter of Guar gum accounting for more than 80 percent of the global output and trade. Guar has now assumed a larger role among the domesticated plants due to its unique functional properties. India Ranks First in the production of guar which is grown in the North Western part of the Country which mainly includes the states of Rajasthan, Gujarat, Haryana and Punjab. Other main countries are Pakistan, U.S.A and Brazil The by-product of Guar Gum industry consisting of the outer seed coat and germ material is called guar meal. The Guar meal after gum Extraction is a potential source of protein and contains about 42% crude protein which is one and a half times more than the level of protein in guar seed. The protein content in guar meal is well comparable with that of oil cakes. It is used as a feed for livestock including poultry. Guar meal contains two deleterious factors i.e. residual guar gum and trypsin inhibitor, Toasting of Guar Gum improves its nutritive value in chicks. Toasted guar Meal can be used in limited quantity i.e. Up to 10% in Poultry diet. However it can replace groundnut cake by almost 100% in animal feeds. Guar Gum (Galactomanan) is a high molecular weight carbohydrate polymer made up of a large number of mannose and galactose unit linked together. The crude Guar Gum is a greyish white powder 90% of which dissolves in water. It is non ionic polysaccharide based on the milled endosperm of the guar bean whose average. Composition is: Hydrocolloid: 23% Fats: 40% Proteins: 34% The most important property of the Guar is its ability to hydrate rapidly in cold water to attain a very high viscosity at relatively low concentrations. Its specific colloidal nature gives the solution an excellent thickening power which is 6 to10 times thicker than that obtained from starch. It is stable over a wide range of PH and it also improves the flow ability and pump ability of the fluid. It is a superior friction loss reducing agent.
Switching Power Supply (SMPS) S-350 Series (Single) Low price and high reliability 105f¬ output capacitor AC input power suitable for the world High efficiency and low operation temperature Soft-start current can reduce the AC input impact effectively With short-circuit and overload protection 100% full-load burning test Installed with EMI filter, minimum wave. 1) Switching Power Supply (SMPS) Output: Dc voltage/Rated current:5V/50A or7.5V/40A or12V/29A or13.5V/25.8A or15V/23.2A or24V/14.6A or27V/13A or48V/7.3A 2) Switching Power Supply (SMPS) Input: Voltage range: 90 ~ 132VAC / 176 ~ 264VAC by switch 254 ~ 370VDC AC input frequency: 47 - 63Hz AC current:6.5A/115VAC 4A/230VAC Inrush current (max.):cold start 25A/115VAC 50A/230VAC Leakage current:
Switching Mode Power Supply (SMPS) S-150 Series (Single) Low price and high reliability 105f¦ output capacitor AC input power suitable for the world High efficiency and low operation temperature Soft-start current can reduce the AC input impact effectively With short-circuit and overload protection 100% full-load burning test Installed with EMI filter, minimum wave. 1) Switching Power Supply (SMPS) Output: Dc voltage/Rated current:5V/30A or7.5V/20A or9V/16.7A or12V/12.5A or13.5V/11.2A or15V/10A or24V/6.5A or27V/5.6A or48V/3.2A 2) Switching Power Supply (SMPS) Input: Voltage range: 85 ~ 132VAC / 170 ~ 264VAC selected by switch 248 ~ 370VDC AC input frequency: 47 - 63Hz AC current:3.2A/115VAC 1.6A/230VAC Inrush current (max.):cold start 35A/115VAC 60A/230VAC Leakage current:
Switching power supply Switching mode power supply (smps) sp-500 series (single) 105 output capacitor Ac input power suitable for the world High efficiency and low operation temperature Soft-start current can reduce the ac input impact effectively With short-circuit and overload protection 100% full-load burning test Installed with emi filter, minimum wave. 1) switching power supply (smps) output: Dc voltage/rated current:12v/40a or13.5v/36a 15v/32a or24v/20a or27v/18a or48v/10a 2) switching power supply (smps) input: Voltage range: 88 ~ 264vac 47 ~ 370vdc Ac input frequency: 47 - 63hz Ac current:7a/115vac 3.5a/230vac Inrush current (max.):cold start 18a/115vac 36a/230vac Leakage current:
Switching Mode Power Supply (SMPS) S-100 Series (Single) Low price and high reliability 105f¦ output capacitor AC input power suitable for the world High efficiency and low operation temperature Soft-start current can reduce the AC input impact effectively With short-circuit and overload protection 100% full-load burning test Installed with EMI filter, minimum wave. 1) Switching Power Supply (SMPS) Output: Dc voltage/Rated current:5V/20A or7.5V/13.6A or10V/10A or12V/8.5A or15V/6.7A or 18V/5.6A or24V/4.5A or27V/3.7A or48V/2A 2) Switching Power Supply (SMPS) Input: Voltage range: 85 ~ 132vac / 170 ~ 264vac selected by switch 255 ~ 370vdc AC input frequency: 47 - 63Hz AC current:2.4A/115VAC 1.2A/230VAC Inrush current (max.):cold start 30A/115VAC 60A/230VAC Leakage current:
Switching Mode Power Supply (SMPS) S-25 Series (Single) Low price and high reliability 105f¦ output capacitor AC input power suitable for the world High efficiency and low operation temperature Soft-start current can reduce the AC input impact effectively With short-circuit and overload protection 100% full-load burning test Installed with EMI filter, minimum wave. 1) Switching Power Supply (SMPS) Output: Dc voltage/Rated current:5V/5Aor12V/2.1Aor15V/1.7Aor 24V/1.1A 2) Switching Power Supply (SMPS) Input: Voltage range: 85 ~ 264VAC 120 ~ 370VDC AC input frequency: 47 - 63Hz AC current: 0.6A/115VAC 0.35A/230VAC Inrush current (max.):cold start 15A/115VAC 30A/230VAC Leakage current:
AC/DC Switching Power Adaptors Wide input voltage 90 to 264 VAC,47 to 63 Hz Output voltage available from 5VDC to 24VDC Optional output connectors Single and dual output U.S European, U.K wall plug in type. Input surge current, over voltage and overload protection Splash proof, Class I insulation With UL, CUL, CSA, TUV, CE, GS, PSE, approved For Chargers, PDA, MP3, Digital camera, Notebook, ADSL modem, MO-ROM, CD-ROM ,etc
A/C Input Voltage: 90 TO 132 VAC OR 180 TO 264 VAC (select by switch) A/C Input Freqneucy: 50/60Hz A/C Input current: 6A RMS MAX. FOR 115 VAC 3A RMS MAX. FOR 230 VAC Max surfing current : 50A FOR 115 VAC cold boot 100A FOR 230 VAC cold boot Variation rate: í+1% Load variation vate: í+5% (ONLY -5V, ¿C12Ví+10%) Min loading : +5V/2.0A +12V/1.0A Ripple : +3.3V/80mV +5V/80mV +12V/150mV -5V/200mV -12V/240mV +5VSB/80mV Efficiency:70% MINIMUM AT FULL LOAD Operation temperature: 0íµ~+50íµ CENTIGRADE Storate temperature: -40íµ~+85íµ CENTIGRADE Storate humidity : 10%~90% Mean non-malfunctional operaton duration: 20K HOURS MINIMUM AT 25íµAMBIENT Micro ATX power supply 250w, front exhaust fan at front / rear inspire fan at rear (all wires & plugs are included).
* Max. peak power:250W * Half-bridge circuit design * ATX 12V version 2.3 compliant * Fan: 8cm/12cm * Protections: OCP, OVP, UVP, SCP, OTP,OPP * Input Voltage: 115V or 230V * Power efficiency: up to 60% * With inrush current limit * CE Certification: optional * Cable: 20# 400mm * Connectors: 2 big 2SATA, 1P4. Color box packing or customized.
15-200W Series switching power supply . whitebox +carton.
AC/DC Switching Power Adaptors Input voltage:AC90-240V/47-63Hz Output voltage:DC3-24V/0.3-2.3A U.S European, U.K wall plug in type. With UL, CUL, CSA, TUV, CE, GS, PSE, approved For Chargers, PDA, MP3, Digital camera, Notebook, ADSL modem, MO-ROM, CD-ROM ,etc
AC/DC Switching Power Adaptors Input voltage:AC90-240V/47-63Hz Output voltage:DC3-24V/0.3-2.3A U.S European, U.K wall plug in type. With UL, CUL, CSA, TUV, CE, GS, PSE, approved For Chargers, PDA, MP3, Digital camera, Notebook, ADSL modem, MO-ROM, CD-ROM ,etc
AC/DC Switching Power Adaptors Input voltage:AC90-240V/47-63Hz Output voltage:DC3-24V/0.3-2.3A U.S European, U.K wall plug in type. With UL, CUL, CSA, TUV, CE, GS, PSE, approved For Chargers, PDA, MP3, Digital camera, Notebook, ADSL modem, MO-ROM, CD-ROM ,etc
Features: *Wide input voltage 90 to 264 VAC,47 to 63 Hz *2 Prong wall mount plug-in main AC connect *Output voltage available from 5VDC thru 24VDC *Single output *Splash proof *One year warranty
We supply different type of pumps. Please contact us
Few of the types available - CATERPILLAR ATERPILLAR 3406B/C OIL PUMP ASS Y' 4N0735 CATERPILLAR C9 OIL PUMP ASS'Y 3318905 CATERPILLAR 3116 OIL PUMP ASS'Y 1192924 CATERPILLAR 3304/3306 FUEL PUMP ASS'Y 1W1695 CATERPILLAR 3406 FUEL PUMP ASS'Y 1W1700 CATERPILLAR 3114/6.3304 FUEL PUMP ASS'Y 4W0788(110MM) CATERPILLAR 3304/3306 FUEL PUMP ASS'Y 1052508(110MM) CATERPILLAR 3114/6.3126.3306.3408 FUEL PUMP ASS'Y 1832823(1375541)140MM CATERPILLAR 3304/3306 FUEL PUMP ASS'Y 9H2256 KOMATSU 6D105 OIL PUMP ASS'Y 6136-51-1100 KOMATSU S6D105 OIL PUMP ASS'Y 6136-52-1100 KOMATSU S6D95(21T) OIL PUMP ASS'Y 6209-51-1201 KOMATSU S6D95L(20T) OIL PU For specification, price and more details please contact us
We are exporter of Calcined Alumina. According to different requirements, five series of products have been formed, including dry pressing, hot die casting, refractory, casting and setting, structural ceramic granulator, etc. It can be widely used in electronic equipment, structural ceramics, refractories, wear-resistant materials, polishing materials and other industries.
Ramming mass is commonly used in metallurgy, building materials, non-ferrous metal smelting, chemical, machinery and other manufacturing industries. Ramming mass is widely used in non-core intermediate frequency furnace and core induction furnace. As an intermediate frequency furnace ramming material, refractory ramming is applied to melt gray cast iron, nodular cast iron, malleable cast iron, vermicular cast iron, and cast alloy steel; to melt carbon steel, alloy steel, high manganese steel, tool steel, heat resistant steel, stainless steel, molten aluminum and its alloys; to melt red copper, brass, white brass, bronze and its alloys, etc. Induction furnaces are used for melting cast iron, mild steel and various alloy steels in foundries and making of steel in mini steel plants using sponge iron The refined high silicon, low iron quartz sand and quartz powder are selected and the fused quartz sand is added as the refractory material., with no slag, no crack, damp proof, convenience of repair, and the corrosion resistance, thus greatly improving the furnace service life span and the economic benefit.. Silica ramming mass can safely be used up to an operating temperature of 1600 deg C. Since it expands very little, it is superior to both alumina and magnesia refractories to resist thermal shocks Acid ramming material is the premixed ramming mass of the lining material. The acid ramming mass is used to smelt a series of metal materials such as ordinary steel and carbon steel. The lining practice best suited to a particular furnace depends upon the capacity and design of the furnace, operation practice adopted during making of a heat, and furnace output.