Specifications: Color: Yellow, light brown, light ivory, light ash-grey, or deep ivory. Pieces may show light brown speckles or blemishes on the surface, provided that not more than 20 percent of the pieces are affected. Size description: Large pieces. Passing through Sieve Numbers â?¥8.0 mm and retained on Sieve Number =5.0 mm. Moisture: max 5% Next lower size grade: max 5% Defects: 11% max in total Packing: â?? 1 PE x 50 lbs. each net / Carton â?? 2 PE x 25 lbs. each net / Carton â?? 10 kg x 2 Tin cans / Carton â?? 11.34 kg x 2 Tin cans / Carton Total: 700 cartons / 20â??fcl 1400 cartons / 40â??fcl Quality: Complies with AFI and ISO / HACCP standards Quality inspection: Vina Control / SGS before shipment
FH SERIES OF PRODUCTS: FH products are Pure nonionic derived the endosperm of guar polysaccharide (Cyamopsos tetragonolobus). The products are unique with ultra-high viscosity with fastest hydration characteristics as shown in Figure 1 below. Also, when added with other drilling components, to seawater, a KCl solution or other aqueous system, the product suspension disperses readily without lumping, even under low-shear conditions generating most of its full viscosity within just a few minutes. PRODUCT COMPATIBILITY: FH series of products are compatible with most of the chemicals and auxiliaries used in drilling operations. However, the products are not compatible with Arabic and Crystal gums. Also, in presence of borates they form elastic gel. PRODUCT APPLICATIONS: FH series of products are natural, high viscosity, fast hydrating non-Newtonian hydrocolloids with suitable cross linking components in diesel slurries and are versatile for continuous mix applications, where extremely fast hydration and subsequent viscosity development is required. They are excellent viscosifiers, stabilizers, thickeners and suspending agent for use in oil-drilling, workover fluids and several other oilfield applications like hydraulic fracturing, oil well stimulation, mud drilling, oil well capping, flocculent and liquid shoring etc. The product is used as a surfactant; synthetic polymer and deformer ideally suited for all rheological requirements of water based and brine based drilling fluids. Specifications:- PRODUCT : FH-35 FH-38 FH-42 CAS No. : 9000-30-0 9000-30-0 9000-30-0 Granulation : FINE FINE FINE APPEARANCE : OFF WHITE POWDER MOISTURE : 8% Max. 8% Max. 8% Max. PROTEIN (N X 6.25) : 5.0% Max 5.0% Max 5.0% Max ASH : 1.5% Max. 1.5% Max. 1.5% Max. ACID INSOLUBLE RESIDUE (A.I.R.) : 3% Max. 3% Max. 3% Max. CARBOHYDRATE (incl gum by difference) : 82% Min 82% Min 82% Min pH (1% Solution) : 5.5 ? 6.5 5.5 ? 6.5 5.5 ? 6.5 VISCOSITY : (0.48% Product in 2% KCL Sol. 2.5 mins mix @1500 RPM in waring blender) Fann 35sa Viscometer at 300 RPM, 25�C 3 Mins : 35 3 Min:38 3 Mins : 42 5 Mins : 37 5 Mins : 39 5 Mins : 43 30 Mins : 39 30 Mins : 42 30 Mins : 45 60 Mins : 40 60 Mins : 43 60 Mins : 47
NOVEXIM Dear all customer Produced from freshly selected matured coconuts, Desiccated Coconut Low Fat is the dehydrated white coconut meat with lower fat content. Our products are unsweetened and do not contain any preservatives or additives. Desiccated Coconut Low Fat is most ideal for confectioneries and used as fillings, toppings and as ingredients especially for food manufacturers. Desiccated Coconut Low Fat is perfect for various industries that require the exhilarating feel of natural fibre in the product. As the product is more shelf stable compared to Desiccated Coconut High Fat, our Desiccated Coconut Low Fat is a good substitute for Desiccated Coconut High Fat. Bakeries Popularly used as topping for cakes and pastries; centre filling for buns; decoration for cakes; etc. Confectioneries â?? Very ideal as fillings for candy bars; chocolate coating, etc. Desiccated Coconut Low Fat should be stored in a clean, cool and dry place away from direct sunlight, chemicals and free from odors, under an ideal room temperature of between 26C to 3C. Ingredient Fresh Coconut Meat Oil : 60 - 65 % Color Natural white Appearance Free from insect infestation, foreign bodies and metal. Flavour Mild, fresh and sweet characteristics of coconut with no off-flavour or odour Packing In 3-ply Kraft paper bags with inner sealed polyliner Size of Packing 25 kg net per bag Qty Per 20ft FCL 280 bags x 25 kg net (7 metric tons) Qty Per 40â?? HC 560 bags x 25 kg net ( 14 metric tons)
NOVEXIM Dear all customer Produced from freshly selected matured coconuts, Desiccated Coconut Low Fat is the dehydrated white coconut meat with lower fat content. Our products are unsweetened and do not contain any preservatives or additives. Desiccated Coconut Low Fat is most ideal for confectioneries and used as fillings, toppings and as ingredients especially for food manufacturers. Desiccated Coconut Low Fat is perfect for various industries that require the exhilarating feel of natural fibre in the product. As the product is more shelf stable compared to Desiccated Coconut High Fat, our Desiccated Coconut Low Fat is a good substitute for Desiccated Coconut High Fat. Bakeries Popularly used as topping for cakes and pastries; centre filling for buns; decoration for cakes; etc. Confectioneries Very ideal as fillings for candy bars; chocolate coating, etc. Desiccated Coconut Low Fat should be stored in a clean, cool and dry place away from direct sunlight, chemicals and free from odors, under an ideal room temperature of between 26C to 32C. Ingredient Fresh Coconut Meat Oil : 60 - 65 % Color Natural white Appearance Free from insect infestation, foreign bodies and metal. Flavour Mild, fresh and sweet characteristics of coconut with no off-flavour or odour Packing In 3-ply Kraft paper bags with inner sealed polyliner Size of Packing 25 kg net per bag Qty Per 20ft FCL 280 bags x 25 kg net (7 metric tons) Qty Per 40HC 560 bags x 25 kg net ( 14 metric tons)
Guar Gum Split is refined endosperm derived from guar seed or cluster bean (cyamoperm tetragonoloba). Guar Splits are non-ionic polysaccharide galacomannan. Guar Gum Refined Split (Endosperm) is mechanically separated from guar seed which yields 28-30% of Refined Split. Guar beans are harvested and dried following the growing season. The beans are shelled from the pods, the germ and hull removed. The resulting guar splits are wet-milled into powder; the powder is graded by granulation and quality. Products are re-blended according to specification, bagged and marked. Guar Gum Split with its versatile inherent properties is used all over the globe with different utilities in many industries like Petroleum (Oil drilling), textile, printing, food pharma, cosmetic, toiletries paper, tanneries, mining, explosives, pet food etc. in powder form either directly plain Guar Gum Powder or in derived form. Uses : Guar Gum Split with its versatile inherent properties is used all over the globe with different utilities in many industries like Petroleum (Oil drilling), textile, printing, food pharma, cosmetic, toiletries paper, tanneries, mining, explosives, pet food etc. These industries use Guar Gum in powder form either directly plain Guar Gum Powder or in derived form. We provide quality Guar Gum Splits to quality manufacturer of Guar Gum Powder, which is their pre-requirement for manufacturing high quality Guar Gum. Specifications: Color Pale-white Gum Content 80-85% Splits 92-98% Mineral Matter (ASH) 1.5% max Fiber 1.5 – 2.0 % max Protein 5% Maximum Ether Soluble Substances 0.6% Maximum Acid insoluble ash (sand and/or silica) Traces Black Split 1% max Heavy Metals Nil Appearance Bright creamy yellow Packaging: Type of Bags Quantity HDPE Bags 50.00 Kgs Jumbo Bags 1000.00 Kgs
Desiccated coconut, sometimes referred to as Coconut Powder, is a dehydrated form of white coconut meat from freshly selected mature coconut kernels. It is prepared from substantially sound white kernel obtained from the whole nut of coconut (Cocos nucifera). Desiccated coconuts have to be processed in an appropriate manner, undergoing operations such as de-husking (the removal of the husk, leaving the shell intact), hatcheting (the removal of the shell), paring (the removal of the brown skin around the kernel), washing, comminuting, drying (to humidity level below 3%) and sifting. They can be produced without oil extraction or with partial oil extraction by appropriate physical means. Preservatives are allowed for use in production of desiccated coconuts and the most common in practice is sulphur dioxide. Also citric acid is allowed for use as the antioxidant. Table 1: Combined Nomenclature code for desiccated coconuts Number Product 080111 Coconuts, desiccated Product Specification Quality For detailed standard quality requirements please refer to Codex Alimentarius Standard for Desiccated Coconut The basic quality requirements for desiccated coconuts are: Colour: natural white to light creamy Texture: free-flowing and free from yellow specks Flavour: distinctive coconut flavour without off-flavours due to deterioration or absorption of extraneous substances. Odour: The odour shall be characteristic of the product, shall not be mouldy, cheesy, smoky, fermented or rancid, and shall not possess any undesirable odour. Oil content: According to the oil content, desiccated coconuts are in trade practice commonly divided into 2 categories: 1. High fat Desiccated Coconut (sometimes referred as 'full fat') with equal or more than 60% m/m of oil. It is dehydrated form of white coconut meat from freshly selected mature kernels. 2. Low fat Desiccated Coconut with less than 60% m/m of oil. It is a dehydrated form of white coconut meat after extraction of the Coconut milk. The fat content of this product can vary but is usually in the range of 45% - 55%. Additional quality requirements
Desiccated coconut, sometimes referred to as Coconut Powder, is a dehydrated form of white coconut meat from freshly selected mature coconut kernels. It is prepared from substantially sound white kernel obtained from the whole nut of coconut (Cocos nucifera). Desiccated coconuts have to be processed in an appropriate manner, undergoing operations such as de-husking (the removal of the husk, leaving the shell intact), hatcheting (the removal of the shell), paring (the removal of the brown skin around the kernel), washing, comminuting, drying (to humidity level below 3%) and sifting. They can be produced without oil extraction or with partial oil extraction by appropriate physical means. Preservatives are allowed for use in production of desiccated coconuts and the most common in practice is sulphur dioxide. Also citric acid is allowed for use as the antioxidant. Table 1: Combined Nomenclature code for desiccated coconuts Number Product 080111 Coconuts, desiccated Product Specification Quality For detailed standard quality requirements please refer to Codex Alimentarius Standard for Desiccated Coconut The basic quality requirements for desiccated coconuts are: Colour: natural white to light creamy Texture: free-flowing and free from yellow specks Flavour: distinctive coconut flavour without off-flavours due to deterioration or absorption of extraneous substances. Odour: The odour shall be characteristic of the product, shall not be mouldy, cheesy, smoky, fermented or rancid, and shall not possess any undesirable odour. Oil content: According to the oil content, desiccated coconuts are in trade practice commonly divided into 2 categories: 1. High fat Desiccated Coconut (sometimes referred as 'full fat') with equal or more than 60% m/m of oil. It is dehydrated form of white coconut meat from freshly selected mature kernels. 2. Low fat Desiccated Coconut with less than 60% m/m of oil. It is a dehydrated form of white coconut meat after extraction of the Coconut milk. The fat content of this product can vary but is usually in the range of 45% - 55%. Additional quality requirements
Desiccated coconut, sometimes referred to as Coconut Powder, is a dehydrated form of white coconut meat from freshly selected mature coconut kernels. It is prepared from substantially sound white kernel obtained from the whole nut of coconut (Cocos nucifera). Desiccated coconuts have to be processed in an appropriate manner, undergoing operations such as de-husking (the removal of the husk, leaving the shell intact), hatcheting (the removal of the shell), paring (the removal of the brown skin around the kernel), washing, comminuting, drying (to humidity level below 3%) and sifting. They can be produced without oil extraction or with partial oil extraction by appropriate physical means. Preservatives are allowed for use in production of desiccated coconuts and the most common in practice is sulphur dioxide. Also citric acid is allowed for use as the antioxidant. Table 1: Combined Nomenclature code for desiccated coconuts Number Product 080111 Coconuts, desiccated Product Specification Quality For detailed standard quality requirements please refer to Codex Alimentarius Standard for Desiccated Coconut The basic quality requirements for desiccated coconuts are: Colour: natural white to light creamy Texture: free-flowing and free from yellow specks Flavour: distinctive coconut flavour without off-flavours due to deterioration or absorption of extraneous substances. Odour: The odour shall be characteristic of the product, shall not be mouldy, cheesy, smoky, fermented or rancid, and shall not possess any undesirable odour. Oil content: According to the oil content, desiccated coconuts are in trade practice commonly divided into 2 categories: 1. High fat Desiccated Coconut (sometimes referred as 'full fat') with equal or more than 60% m/m of oil. It is dehydrated form of white coconut meat from freshly selected mature kernels. 2. Low fat Desiccated Coconut with less than 60% m/m of oil. It is a dehydrated form of white coconut meat after extraction of the Coconut milk. The fat content of this product can vary but is usually in the range of 45% - 55%. Additional quality requirements
We are supplier and exporter of all Types of Granites. We can supply Premium Grade to commercial grade. Size and surface and sides finishes can be customized. Finishes: Mirror, Matte, Flame finish etc. Slabs: Length- 6 to 9, width: 2 to 3, thickness:18mm (+/-1) Tiles: 45x45cm, 60x45,x60x60cm in 10mm. Any other sizes can be customize. Edge finish as per your requirement.
Technical specifications: 1) Free fatty acid: 1-3% 2) Free fatty acid: 3-5% 3) Free fatty acid: 5-10% 4) Free fatty acid: 10-20%
Specifications: 1. HDPE 2. Transparent granule 3. We have all grades - Injection, Film and Moulding, all Density and Melt Flow Rate.
Specifications:- 1. LLDPE 2. Transparent granule 3. We have all grades - Injection, Film and Moulding, all Density and Melt Flow Rate.
MOQ: 10,000 Barrels per Month Supply Ability: 1,000,000 Barrels per Month JP54 Technical Specifications: ADDITIVES Antioxidant in hydro processed fuel mg/l min 17 max 24 Antioxidant non hydro processed fuel mg/l max 24 Static dissipater first doping ASA- 3 mg/l max 1 Stadis 450 mg/l max 3 COMBUSTION PROPERTIES Specific energy, net mi/kg min 18.4 D 4808 Smoke point mm min 19 D 1322 Lumininomitter number min 45 D 1740 Naphtales % vol max 3 D 1840 Propriety unit min max result test ip method ASTM COMPOSITION Total acidity mg KOH /g max 0.01 354 D 3242 Aromatic % vol max 22.0 158 D 1318 Sulphur, total % mass max 0.30 107 D 1266/2622 Sulphur mercaptan % mass max 0.003 342 D 3227 Doctor test 30 D 4952 VOLATILITY Initial boiling point centigrade max report 123 D 96 10% vol at C 240 20% vol at C report 50% vol at C report 80% vol at C report End point centigrade max 42 170/303 D 56 / 3828 Density at 15 C kg m2 min /max 776/840 180/385 D 1298 LOW TEMPERATURES PROPERTIES freezing point centigrade max 40 15 D 1298 Corrosion copper (2hrs at 100 C) Corrosion silver (4 hrs at 500C) max 1 227 STABILITY Thermal stability control temp. 280C 323 Filter pressure, differential mm. Hg max 25 Tube deposit rating (visual) max
For in vitro qualitative detect of Covid-19 antigen in nasal(NS) swab specimens directly from individuals who are suspected of COVID-19 by their healthcare provider within the first 5 days of the onset of the symptoms. This test is only provided for use by clinical laboratories or to healthcare workers for point-of-care testing, and not for at home testing. 1.Easy to collect samples simple operation without professional equipment. 2.The test results are available in 15 minutes, and the test results are clearly visible. 3.Convenient transportation and low price, higher accuracy. 4.Suitable for large-scale rapid screening. Shelf life: 24 Months Test Result time: 10 Mins Packing: 25 Pieces per Box
En590 ,jet a1 ,jp54 ,d6 , petroleum products, icumsa 45 sugar, palm oil ,cp8 & cp10 ,chicken paws , chicken feet, and chicken mjw, buffalo meat and offal, copper cathode , aluminum, natural herbal extract powder, spices..
Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor
We are supplier and exporter of Copper Slag. Copper slag is a low cost expendable abrasive suited for open blast cleaning and due to its low silica content it does not pose the health hazards created by silica sand. Its sharp, hard particles can provide a fast cleaning action and an excellent surface profile. It is available in various sizes Copper slag is abrasive blasting grit made of granulated slag from metal smelting processes (also called iron silicate). Copper slag abrasive is suitable for blast cleaning of steel and stone/concrete surfaces, removal of mill scale, rust, old paint, dirt etc. Suitable for SA-3, SA-2 and SA-2. Copper slag blasting media/grit is manufactured of the granulated slag of copper refineries, and used for blast-cleaning of metal surface. In different industries it is called different names abrasive powder, grit, copper slag grit, mineral grit, grinding grains, etc.
Descriptions: Cuttlebones are an excellent calcium source for birds. The rough edible surface helps to trim the beaks of birds as well as provide something for your bird to chew on. The cuttlebones can also be cut into smaller pieces or ground into a powder and used as a nutritional supplement for all types of birds. Features: Provides natural calcium and minerals Derived from natural cuttlefish Natural surface keeps beaks trim and sharp Suitable for cockatiels Specification: Material: Cuttlefish bone Size: 5~20cm Quantity: 3~5 Pcs/bag Note: 1.Transition: 1cm=10mm=0.39inch 2.Please allow 0-3cm error due to manual measurement. pls make sure you do not mind before you bid. 3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! No Retail Package Package Contents: 1 Bag x Cuttlefish Bone