It is the only type of Urea that meets the ISO 22241 specification (Uncoated, Aldehyde, heavy metals free) and the only suitable Urea for the production of AdBlue®/AUS32/ARLA32 solutions. For meeting the ISO 22241 the Urea needs to be of highest purity/quality. Automotive grade urea dissolved within deionized water is resulting in an aqueous urea solution, supporting the reduction of mono-nitrogen oxides exhaust emissions by injection into selective catalytic reduction systems of heavy duty engines. This aqueous urea solution is standardized as AUS 32 in ISO 22241 and consequently the technical specifications for automotive grade urea are derived from this standard. Urea Assay (wt %) 98.0 min 99.1 Granulate size 0.85-2.80mm 91% Moisture (wt %) 0.5 max 0.3 Nitrogen(wt %) 46 46.4 Biuret (wt %) 1.0 max 0.65 Aldehydes (ppm) 5 max 4 Free Ammonium (wt %) 0.01 0.01 Insolubles (ppm) 20 13 Fe (mg/kg) 0.5 max Less than 0.2 Al (mg/kg) 0.5max Less than 0.2 Cu (mg/kg) 0.5 max Less than 0.2 Zn (mg/kg) 0.5 max Less than 0.2 Cr (mg/kg) 0.5 max Less than 0.2 Ni (mg/kg) 0.5 max Less than 0.2 Mg (mg/kg) 0.5 max Less than 0.2 Na (mg/kg) 0.5max Less than 0.2 K (mg/kg) 0.5 max Less than 0.2 Ash (ppm) 100 max. Less than 10 Phosphate(ppm) 0.5 max Less than 0.2 Heavy Metal( ppm) 0.5 0.3 Additive NONE NONE
AdBlue liquid solution is made up of 32.5% urea and 67.5% de-ionised water. You may be wondering, where does the urea in AdBlue ic ammonia and carbon dioxide. The urea is then added to the de-ionised water to create AdBlue. This guarantees quality in accordance with very strict specifications contained in ISO 22241. AdBlue is a diesel exhaust fluid used in vehicles with Selective Catalytic Reduction (SCR) technology to reduce harmful gases being released into the atmosphere. AdBlue is a 32,5 % solution of high-purity, synthetically manufactured urea in de-mineralized water. It is a safe-to-use fluid. Parameter Minimum Maximum Unit Appearance Colourless Liquid with slight ammonia odour   Freezing point -11°C -11°C °C Boiling point 100°C 100°C °C Basicity 9 10 pH Flash point not applicable (non-flammable)   Water solubility 100  g/l Viscosity at 20°C 1.4 1.4 mPa.s Urea Content 31.8 33.2 % Density at 20°C 1.087 1.093 g/cm3 Refracting index at 20°C 1.3814 1.3843  Alkalinity as NH3  0.2 % Biuret  0.3 % Insolubles 20 mg/kg  20 mg/kg Calcium  0.5 mg/kg Iron  0.5 mg/kg Aluminium  0.5 mg/kg Magnesium  0.5 mg/kg Sodium  0.5 mg/kg Potassium  0.5 mg/kg Copper  0.2 mg/kg Zinc  0.2 mg/kg Chromium  0.2 mg/kg Nickel  0.2 mg/kg
MARKCHEM MICRO SILCIA is composed of silicon dioxide (SiO2), collected from silicon metal and ferrosilicon. Micro Silica will react with the Calcium Hydroxide from the cement, which will form more of the Calcium Silicate hydrate, increasing the strength of the concrete. Using Micro Silica will also increase the durability of the concrete.
The characteristics: Reduce the cost of steelmaking, increase economic efficiency, improve product quality, stable performance, improve the quality of molten steel, improve product performance, reduce the amount of alloy added, reduce the cost of steel and increase economic efficiency. Silicon carbon alloy instead of ferrosilicon, silicon carbide, recarburizer, reducing the amount of oxygen scavenger, a converter for deoxidizing alloy, the effect of stability, steel chemical composition, mechanical properties and internal quality are better than the traditional process. By testing and production shows that using Si-C alloy to converter deoxy-alloy process, greatly reduce the cost of steel, creating considerable economic benefits, improve the market competitiveness of steel. The effect of using a silicon-carbon alloy species 1, can replace ferrosilicon and carburant, FeALSi dosage is also reduced, can effectively reduce the cost of steel 6-10 yuan / ton steel 2, smelting carbon steel, special steel and some low-alloy steel, the effective recovery of effective elements.
Silica sand /Quartz sand is processed by crushing quartz grains of quartz, quartz stone is a kind of non-metallic minerals, is a hard, wear-resistant and stable chemical properties of silicate minerals, the main mineral component is SiO2, quartz sand the color is white or colorless, translucent, Mohs hardness of 7, quartz sand is an important industrial mineral raw materials, non-hazardous chemicals, widely used in glass, foundry, ceramics and refractories, smelting ferrosilicon, metallurgical flux, metallurgy, construction, chemicals, plastics, rubber, abrasive, media and other industries.
Characteristics Ferro Silicon ( FeSi ) used as deoxidizer and alloying agents in the steel industry. In order to obtain qualified chemical composition and guarantee the quality of steel, in the last stage of the steel must be deoxidized. The chemical affinity between silicon and oxygen is very large, Thus ferrosilicon is strong deoxidizer used in sedimentation and diffusion deoxidation of steel-making. Add a certain amount of silicon in the steel, can significantly improve the strength, hardness and elasticity of steel. Standard GradeChemical Element (%),, SiAlSPC â?¥(Min)â?¤(Max), FeSi65652.00.020.040.2 FeSi70702.00.020.040.2 FeSi72722.00.020.040.2 FeSi75752.00.020.040.2 Size: 10-50mm; etc. The content packaging particle size may be based on customer demand production.
china coal0001 .MSR Type Buried Scraper Conveyor Conveyor, Scraper Conveyor, Buried Scraper Conveyor Introduction of MSR Type Buried Scraper Conveyor SR type buried scraper conveyor for conveying granular materials: Such as: Calcined dolomite ferrosilicon particle, semi coke, etc... Buried scraper conveyor is a closed rectangular cross-section of the shell, continuous conveying equipment by means of moving the scraper chain conveyer dust, small particles and patches and other bulk materials. Because in the transportation of materials, a scraper chain is all buried in the material, it is known as the buried scraper conveyor. Scraper conveyer has the advantages of simple structure, light weight, small volume, good sealing and convenient repair. It can transport can also tilt or vertical transmission, not only can the single delivery, and serial transportation; Multipoint feeding, multiple points discharging, flexible process layout, as the shell is closed, can significantly improve the working conditions in the transportation of materials, preventing the pollution of the environment. Parameters of MSR Type Buried Scraper Conveyor modelMSR32MSR40 Machine groove width (mm)B=320B=400 Machine groove height (mm)h=320h=360 Chain speed (m/s)0.16,0.2,0.25,0.320.16,0.2,0.25,0.32 Conveying capacity (m/h)8-1615-30
With the increasingly fierce competition in the metallurgical industry market, in order to adapt to the ferroalloy market, our company has developed a new type of deoxidizing material - new alloy silicon to meet the needs of users to reduce costs and improve economic efficiency. This product mainly uses silicon powder as the main raw material and is pressed on the briquette. It is a special product that can replace ferrosilicon in steel production. It can reduce production costs and promote recycling of resources. The production process of the product is as follows:Step 1: Raw material: metal silicon cutting powder, fine grade.Step 2: Inspect the raw materials, and the raw materials must pass the test.Step 3: Process the raw material into a fine powder.Step 4: Add the liquid to the stirrer together with the above powderStep 5: Press the product into a spherical shape with a size of 10-50 mm.Step 6: Test the product and the product must pass the test.Step 7: Pack the product and wait for transportation.The product model categories are as follows:
1. Hot Rolled Coils 2. Hot Rolled Sheets 3. Cold Rolled Coils 4. Cold Rolled Sheets 5. Color Coated Coils 6. Color Coated Sheets 7. Galvanized Coils 8. Galvanized Sheets
1. Billet 2. Bloom 3. Slab
1. DRI/Sponge Iron 2. Ferro Silicon
1. Rebar 2. Beam 3. Angles 4. Pipes 5. Tubes 6. Steel Channel 7. Wire Rod 8. T-profiles
Silicon metal 441/553/3303/4402, metal silicon particles/powder ferro silicon72 /75, ferrosilicon particles,/powder electrolytic manganese flakes, low carbon ferromanganese, medium carbon ferromanganese, high carbon ferromanganese micro carbon ferro chrome�¯�¼?low carbon ferrochrome�¯�¼?medium carbon ferrochrome�¯�¼?high carbon ferrochrome�¯�¼?silicon chrome casi cored wire50 28/55 28, silicon calcium alloy55 28/60 30, silicon aluminum and iron carbon silicon.Transportation, cargo warehousing, processing
It is used as a deoxidiser and alloying agent in the steelmaking industry. In order to obtain a steel with a satisfactory chemical composition and to guarantee the quality of the steel, it is necessary to deoxidise it in the final stage of steelmaking. The chemical affinity between silicon and oxygen is very large, and ferrosilicon is therefore a strong deoxidising agent in steelmaking for precipitation and diffusion deoxidisation. ... It is used as an inoculant and spheroidising agent in the iron casting industry. ... Used as reducing agent in ferroalloy production.
A charcoal ball press machine is mechanical equipment that presses powdered materials into different shapes. Usually, the BBQ charcoal briquette machine is mainly used to press carbon powder and coal powder into spherical ones. These regular-shaped briquettes are always used to make barbecue charcoal. The raw materials used by the barbecue charcoal machine are generally carbon powder and coal powder. The diameter of the raw material cannot exceed 3 mm. These raw materials need to be added with a certain proportion of binder and water. In addition, iron ore powder, aluminum powder, cast iron dust, manganese ore powder, gypsum powder, ferrosilicon powder, lead powder, blast furnace ash, chimney ash, and other powdery materials with low water content can also be made into spherical shapes
Silica sand /Quartz sand is processed by crushing quartz grains of quartz, quartz stone is a kind of non-metallic minerals, is a hard, wear-resistant and stable chemical properties of silicate minerals, the main mineral component is SiO2, quartz sand the color is white or colorless, translucent, Mohs hardness of 7, quartz sand is an important industrial mineral raw materials, non-hazardous chemicals, widely used in glass, foundry, ceramics and refractories, smelting ferrosilicon, metallurgical flux, metallurgy, construction, chemicals, plastics, rubber, abrasive, media and other industries. Sandblasting Grade of Silica Sand Fine Quartz Sand From China Manufacturer Features: Hard, wear-resistant, chemical stability of minerals. Natural Silica Sand. Huge Reserve raw material of Silica sand in China. White granules shape Used in float glass Painting,ceramics and so on. Wide application in many industry.
Characteristics Ferro Silicon ( FeSi ) used as deoxidizer and alloying agents in the steel industry. In order to obtain qualified chemical composition and guarantee the quality of steel, in the last stage of the steel must be deoxidized. The chemical affinity between silicon and oxygen is very large, Thus ferrosilicon is strong deoxidizer used in sedimentation and diffusion deoxidation of steel-making. Add a certain amount of silicon in the steel, can significantly improve the strength, hardness and elasticity of steel. Standard Grade Chemical Element (%) Si Al S P C â?¥(Min) â?¤(Max) FeSi65 65 2.0 0.02 0.04 0.2 FeSi70 70 2.0 0.02 0.04 0.2 FeSi72 72 2.0 0.02 0.04 0.2 FeSi75 75 2.0 0.02 0.04 0.2 Size: 10-50mm; etc. The content packaging particle size may be based on customer demand production.
Characteristics Ferro Silicon ( FeSi ) used as deoxidizer and alloying agents in the steel industry. In order to obtain qualified chemical composition and guarantee the quality of steel, in the last stage of the steel must be deoxidized. The chemical affinity between silicon and oxygen is very large, Thus ferrosilicon is strong deoxidizer used in sedimentation and diffusion deoxidation of steel-making. Add a certain amount of silicon in the steel, can significantly improve the strength, hardness and elasticity of steel. Standard Grade Chemical Element (%) Si Al S P C â?¥(Min) â?¤(Max) FeSi65 65 2.0 0.02 0.04 0.2 FeSi70 70 2.0 0.02 0.04 0.2 FeSi72 72 2.0 0.02 0.04 0.2 FeSi75 75 2.0 0.02 0.04 0.2 Size: 10-50mm; etc. The content packaging particle size may be based on customer demand production.
Below is detailed procedure for Rotterdam JET A1 fuel 1. Buyer issues ICPO according to Seller's Transaction Procedures with their banking details. 2. Seller issue commercial invoice of the product in tanks at the port; Buyer signs and return back the commercial invoice to the Seller along with MT199 3. Seller issue to buyer POP listed below and any more documents that the buyer need to verify the product: a. GPS coordinate-tank storage receipt (valid for 72 hours on weekdays) (TSR) with scanned barcode. b. Unconditional Dip Test Authorization Letter (DTA) c. Authorization to Sell and Collect d. SGS Report (Less Than 48 Hours old from Rotterdam branch) e. Authorization to verify the product for physical verification (ATV) f. Fuel injection Report at Rotterdam. 4. Buyer inspected by SGS on Buyer's expenses. (lf buyer choose to inspect again). *In case Buyer is satisfied with the above POP, buyer have the opportunity to make payment by MT103 and after successful title transfer buyer will provide logistics ( TSR, ATV & ATI ) to move the product. 5. Upon successful verification of the full POP documents, Buyer orders SGS Intertek or its equivalent team to conduct a dip test on the product in the Seller's tank at Buyer's expense. 6. Following the completion of the dip test, Buyer provides his storage receipt ( TSR, ATV & ATI ) to Seller, injection commences into Buyer's leased storage tanks and upon completion Of full injection, Seller issues to the Buyer with full injection report. 7. Buyer makes 100% payment by MT 103 TT wire transfer for the total product value and the Seller transfers the title to the Buyer along with all documentations. The Seller pays commission to all intermediaries involved in the transaction within 24 hours upon confirmation of Buyer' s payment. 8. Seller issues draft sales purchase agreement (SPA) to the Buyer for review for R&E monthly deliveries. 9. Buyer reviews and approves the SPA and issues SBLC/IRDLC irrevocable, non-transferable auto revolving for 12 monthly shipment value and documentary letter of credit for length of the contract and for each lift per schedule. Buyer pays after dip test by MT103 wire transfer on each monthly quantity. 10. The subsequent delivery shall commence according to the terms and conditions of the contract. Product origin- KAZAKHSTAN Where the product available now STORAGE TANKS IN ROTTERDAM AND HOUSTON Any recent SGS SEE PROCEDURE Which country of origin documents KAZAKHSATAN
EN590 10PPM OFFER Price:$530/MT 1. Buyer issue ICPO and TSA containing the seller's working procedure with scanned copy of buyer's passport along with buyer Company certificate of incorporation. 2. Seller issues commercial invoice of the product in tanks at the port, to be sign along with the attached below partial proof of products. 3. Upon receipt of the signed CI and ATV from buyer storage tank for verification seller issue the below pop documents. -48 hours fresh SGS -INJECTION REPORT -BILL OF LADDING. -TITTLE OF OWNERSHIP TRANSFER -TSR OF WHERE THE PRODUCTS STORE TO VERIFY PHYSICALLY. 4. Buyer inspects by SGS on buyer s expenses and sends TSR. 5. Upon successful dip test in tanks, product will immediately be injected into Buyer's tanks. Buyer makes payment for the product via MT103/TT POINT NO 1,2,3 Is most important . If u can provide then can deal . If not do not waste time 1) Icpo 2) TSA 3) ATV