Miniature 30 bar Pressure Sensor Module MS5541-30C 0-30 bar absolute pressure range 16 Bit ADC 10 - 1100 mbar absolute pressure range 6 coefficients for software compensation stored on-chip Piezoresistive silicon micromachined sensor Integrated miniature pressure sensor 6.2 x 6.4 mm 16 Bit ADC 3-wire serial interface 1 system clock line (32.768 kHz) Low voltage and low power consumption Description: The MS5540C is a SMD-hybrid device including a precision piezoresistive pressure sensor and an ADC Interface IC. It is a miniature version of the MS5534C barometer/altimeter module and provides a 16-bit data word from a pressure and temperature dependent voltage. MS5540C is a low power, low voltage device with automatic power down (ON/OFF) switching. A 3-wire interface is used for all communications with a microcontroller. Compared to MS5534A the pressure range (measurement down to 10 mbar) has been improved. The MS5540C is fully software compatible to the MS5534C and previous versions of MS5540. In addition, the MS5540C is from its outer dimensions compatible to the MS54XX series of pressure sensors. Compared to the previous version, the ESD sensitivity level has been improved to 4kV on all pins. The gel protection of the sensor provides a water protection sufficient for 100 m waterproof watches without any additional protection. Features: Integrated pressure sensor Small size 6.2 x 6.4 mm Pressure range 10-1100 mbar Resolution 0.1 mbar 16 Bit ADC 6 coefficients for a software compensation stored on-chip 3-wire serial interface 1 system clock line (32.768 kHz) Temperature range -40 ~ +85'C Low voltage (2.2 to 3.6V) Low power (Standby current:0.1uA) Pb-free and RoHS-compatible No external components required
Features: oxygen pressure range 2 mbar - 3bar zirconium dioxide (zro2 ) sensing elements non-consumption technology integral heating element no need for temperature stabilisation no reference gas required high accuracy linear output signal operates with external interface boards Specifications Heater supply* Full porous cap 4.35v dc +/- 0.1v dc (1.85a) Stand by 2 v dc (0.85a)
Digital Temperature Humidity Sensor HTU21D In Stock 1. digital temperature and humidity sensor 2. range:1-100%RH 3. original, high quality, competitive price DESCRIPTION HTU21D, the new humidity and temperature sensor of MEAS is about to set new standards in terms of size and intelligence: Embedded in a reflow solderable Dual Flat No leads (DFN) package of 3 x 3mm foot print and 1mm height it provides calibrated, linearized signals in digital, I²C format. HTU21D sensors are dedicated humidity and temperature plug and play transducers for OEM applications where reliable and accurate measurements are needed. Direct interface with a micro-controller is made possible with the module humidity and temperature digital outputs. HTU21D sensors are low power consumption designed for high volume and cost sensitive applications with tight space constraints. Every sensor is individually calibrated and tested. Lot identification is printed on the sensor and an electronic identification code is stored on the chip – which can be read out by command.
Description Based on a unique capacitive cell, these relative humidity sensors are designed for high volume, cost sensitive Applications such as office automation, automotive cabin air control, home appliances, and industrial Process control systems. They are also useful in all applications where humidity compensation is needed. Features applications • fulll interchangeability with no calibration Required in standard conditions • automotive • instantaneous desaturation after long periods in Saturation phase • home appliance • compatible with automatized assembly Processes, including pb free wave soldering And reflow processes (1) • printers • meteorology • individual marking for compliance to stringent Traceability requirements • part may be washed with distilled water
Misir is a low power (20mw4), high performance co2 sensor. Based on gss patented solid state ir sensor technology and innovative optical designs, misir is configured to meet the requirements of the hvac and demand led ventilation markets. Low power 20mw Measurement ranges from 0 to 1% Low noise measurement
UVA MESA DOCE . PRODUÃ??Ã??O ANO TODO. CX 10 DISPLAY 500G 5531 985751097 5531 991553059 vittafoodsbr@gmail.com
Engine Oil Level Sensor For " Porsche " Part Number : 95860616011
Brake Booster Diaphragm Position Sensor For " Mercedes-Benz " Part Number : A0015401517
Product Features: 1. Small size, high power, strong ability to suppress surge current 2. Fast reaction speed, large material constant (B value), Small residual resistance 3. Long life, high reliability, full range, wide application range
DTZ-400G Series Surface Temperature Calibration System is primarily used to calibrate surface sensors of various sizes and types, such as thermistors, film sensors, surface resistance thermometers, ribbon sensors, surface thermocouples, and more. The product consists of a controller and a heater. It is easy to operate, intuitive to display, and can be heated simply by setting the temperature.The temperature rises rapidly and the multi-stage PID temperature control is accurate. The effective use range is up to 130mm in diameter and has a communication interface to communicate with the computer. This product can be used as an infrared camera calibration source if it is slightly changed. Product Features 1.The calibration temperature can reach 400 The temperature rises and the temperature drops quickly. DTZ-400 surface temperature calibration system has a good temperature rise and fall, from room temperature to 400, only 30 minutes, from 400 to room temperature, with a rapid cooling device only 50 minutes, greatly improving work efficiency . 2.Calibration plate diameter up to 130 mm, meeting most surface temperature sensor calibration needs 130mm and is sufficient for calibrating surface sensors of various sizes and types, such as thermistors, film sensors, surface resistance thermometers, ribbon sensors, surface mount thermocouples, etc. 3.External reference platinum resistance thermometer to reduce calibration uncertainty In order to achieve the ultimate in calibration accuracy, the design engineer deliberately reserved a thermometer socket at the bottom of the aluminum surface. platinum resistance thermometer with a diameter of 5 mm can be inserted as a standard for comparison and calibration, which greatly improves the calibration accuracy. 4.Excellent uniformity of temperature and surface finish on the calibration plane Surface sensors are often difficult to calibrate because it is difficult to find a flat, uniform source of surface temperature.The DTZ-400 Surface Temperature Calibration System utilizes aluminum as the surface and has a high finish that ensures that the calibrated sensor is in good contact with the surface temperature calibrator, reducing calibration uncertainty. The DTZ-400 uses a special heating material and a constant temperature structure to make the surface temperature more uniform. 5.Temperature control is accurate, stable, and overshoot temperature is small The device provides a variety of parameter options for the user to choose, including setting the PID parameters of the high,medium and low temperature segments, the inflection point between different temperatures, and the alarm temperature. 6.Portable and easy to use The weight of the whole machine is only 3.5kg, which is small and portable.
TADT portable humidity generator is a portable and high-precision temperature and humidity calibration instrument, which can meet the needs of measurement and calibration of conventional temperature and humidity measuring instruments such as temperature and humidity sensors, temperature and humidity transmitters, small temperature and humidity meters, etc. Functional characteristics * Test chamber space up to (3~5) times that of similar products, providing more efficient test conditions * The test chamber can accommodate various types of in-put cold-mirror-viewer probes for comparison and calibration * Composite sensor jack design, suitable for various diameter temperature and humidity sensors and transmitters * Transparent window and lighting design of measuring room to facilitate reading of various small temperature and humidity meters * Can be calibrated simultaneously (10~15) with small temperature and humidity probes * Calibrate (3-5) block size digital temperature and humidity meter simultaneously * The test chamber provides temperature uniformity within 0.1 in a full range of 5~50 * Design of external drying cylinder, desiccant replacement can be operated on-line, convenient and simple * Design of double-zone drying cylinder, supporting both molecular sieve and discolored silica gel * Visual display of liquid level and dryer state is beneficial to state monitoring during work * Provide 4 channel external (0~1) Vã??(0~5) V and (4~20) mA standard signal inputs * The instrument has built-in humidity conversion software to facilitate users to convert relative humidity, temperature and dew point temperature * Support temperature and humidity curve display, easy for users to view temperature and humidity state trend * 7-inch color LCD touchscreen
1. product description: The parking sensor is mainly used to solve a blind area of the large vehicle and the intelligent parking sensor defense system. Passing rear of vehicle the parking sensor, the position and distance of the rear obstacle are fed back on the LCD display. So that the driver can judge the condition of the car more directly to achieve safe driving. The equipment has the advantages of quick reaction, high sensitivity and strong environmental adaptability. 2. Supplied Accessories : Accessory Quantity Product model Remark Radar host 1 SINH-590 Sensor 4 28T Link 2 According to the car model matching camera 1 AHD AHD720&1080P LCD display 1 LCD Product manual 1 SINH parking sensor monitoring system certificate 1 3. technical parameters: voltage:DC12-24V; Power consumption:
1. product description: The parking sensor is mainly used to solve a blind area of the large vehicle and the intelligent parking sensor defense system. Passing rear of vehicle the parking sensor, the position and distance of the rear obstacle are fed back on the LED display. So that the driver can judge the condition of the car more directly to achieve safe driving. The equipment has the advantages of quick reaction, high sensitivity and strong environmental adaptability. 2. Supplied Accessories : Accessory Quantity Product model Remark Radar host 1 SINH-628 Sensor 4 30T Link 2 According to the car model matching LED display 1 LED Product manual 1 SINH parking sensor monitoring system certificate 1 3. technical parameters: voltage:DC12-24V; Power consumption:
AR5750B Refrigerant/SF6 Gas Leak Detector Description This rechargeable refrigerant gas detector respond to all halogenated refrigerant, but also apply to: A. This was response to all halogenated refrigerant (including chlorine and fluoride). Including but not only limited to below: CFCs e.g. R12, R11, R500, R503 etc... HCFCs e.g. R22, R123, R124, R502 etc... HFCs e.g. R134a, R404a, R125 etc... Also can detect compound gas for example AZ-50, HP62, Mp39, etc... B. Detect gas leaks in hospital equipments. C. SF6 gas was detected in high voltage circuit shot cut.. D. Detect halogen gas when gas mixing with, chlorine, fluorine, bromine. E. Detect carbon tetrachloride from the dry cleaning machine. F. Detect the halon gas from the fire extinguisher. AR5750B Refrigerant/SF6 Gas Leak Detector Specifications * Detect item: All halogen gas * Sensitivity: Halogen refrigerant gas 3gr / yr * Response time: Instantaneous * Warm up time: < 6 second * Continuous operation time: 5 hours(slightly vary with operation) * Operation temperature: 0 to 52C( 0 to 110F) * Power supply: 2000mAh, 3.7V lithium rechargeable battery
5.8GHz C-band microwave. Input voltage: 12 - 24V DC . Input current: 30mA. *0~10V / PWM output signal. Super compact size(o50 only), easy and small enough to be used built-in. Specially designed for UFO highbay fixtures, shoeboxes, wallpacks, simple plug and play. If the lighting fixture manufacturers / contactors do not want the sensor function, they just need to easily remove the sensor head and put the cover cap on, the fixture becomes standard non-sensor control fixture. Intelligent photocell to measure and differentiate natural light from LED light even when used built-in. Memory function with one button commissioning, easy operation and user friendly. IR remote commissioning, easy setting and user friendly. Detection range up to max. 16~18m in diameter. Mounting height: max.12m. Operation temperature: -20 c ~ + 70 c. RoHS compliant. IP rating: IP65.
Quick Details Place of Origin: Sichuan, China (Mainland) Brand Name: SAND Model Number: PT3xx6 Series Pressure Range: 0~150MPa (20000psi) Accuracy: ±1.0% FS Power: 10V DC (6~12V DC) Signal Output: 3.33mV/V (Full 33.3mV) or 3.0mV/V (Full 30mV) Probe Temperature: 535 PT3XX6 Series:PT3116 Series, PT3216 Series, PT3226 Series. Mercury Free Ultra-Temperature Melt Pressure Transducer (Sensor) Product Introduction: PT3xx6 Series Melt Pressure Transducer(Melt Pressure Sensor). This series are used a special material and pressure transmission which can bear as high as 535 °C measuring medium to replace the traditional 400 °C. this technology is created by our company only in home. Performance Parameters: Pressure Range: 0 ~ 5 MPA~ 150 MPA ( 0 ~ 750psi ~ 20000psi ); Accuracy: ±0.5% FS; Power: 10VDC ( 6 ~ 12 V DC ); Output Signal: 3.33mV/V (Default), 3.0mV/V(Optional) etc. Probe Heat Resistance: PT4516 Series: 300°C; PT4616 and PT4626 Series: 400°C; Temperature Drift: =500M/500VDC; Mechanical Connections: 1/2"-20UNF, M10x1.5, M12x1.5, M14x1.5, M18x1.5, M22x1.5 etc. (Optional) Electrical Connections: 6PIN (SD02106P/SD02106S); Thermometric Config: Thermocouple: E, J, K, S type etc.; (PT4626 Series Optional); Thermal Resistance: Pt100 etc. (PT4626 Series Optional); Features: * Anticorrosive wear-resisting coating: apply to high concentrations of rough media pressure measurement, can improve the service life of 3 to 5 times (optional); * Special requirement can make to order, delivery date 7 ~ 15 working days; * Optional supporting intelligent digital pressure meter: PS1016-43x series, PS4810-43x series, PS4812-43x series and PS9016-43x series. Order Format: Example1: PT3816-350bar-M18-150/470-3.33mV/V Note: Product design Model "PT3816". Function code "Null" stands for melt pressure transducer. Coating code "Null" stands for without coating . Pressure range: 0 ~ 350bar.
HPD05 Infrared PM2.5 Sensor Module Product Details 1. Module List HPD05 Module 2. Product Overview HPD05 PM2.5 Sensor Module use principle of optical scattering to measure concentration of dust inthe air,the module built in a Infrared Transmitter and a high sensitive Photoelectric Receiving Sensor the Infrared Transmitter emits light and the light meets the dust to produce the scotch light, theintensity of the scotch light detected by Photoelectric Receiving Sensor reflects the concentration ofdust in the air, HPD05 have two ways to output current concentration data, one is PWM signal (thewidth of signal is the value, 1ms = 1ug/m3), the other is IIC signal(unit is ug/m3). HPD05 can be used for Air Cleaner, Air Conditioner with purifying function, Fresh Air System and air quality testing equipment. 3. Detecting Principle Detecting Principle Per the principle of optical scattering,the Transmitter emits light, and the light meets the dust to produce the scotch light, the high sensitive Photoelectric Receiving Sensor detects the intensity of the scotch light then output intensity signal, current which is proportional to the size and quality of intensity of the scotch light, the current is amplified by amplifier and calibrated by CPU, finally output digital PWM signal or IIC data of concentration of dust. 4. Performance Parameter 1 Characteristics Characteristics Connector CON2 Pin Description Connector CON2 Pin Description 2 Life Life of Light Source: above 5 years with continuous power on. 3 Photoelectricity Characteristics Photoelectricity Characteristics 4 Signal Output a1. PWM signal output(Corresponding Model HPD051Axxx): Signal Output The relation of Low Pulse Time and Dust Concentration: 1ms = 1ug/m3 The pulse width outputted by P1 pin is the average value of Dust Concentration(Lower responding speed, small fluctuation & good stability) The pulse width outputted by P2 pin is the insta
Ultrasonic Sensor Module HC-SR04 HC-SR04 Sensor Features Operating voltage: +5V Theoretical Measuring Distance: 2cm to 450cm Practical Measuring Distance: 2cm to 80cm Accuracy: 3mm Measuring angle covered:
I. Product introduction The DTBH zero-temperature thermostat is a device that can provide a stable and accurate zero-degrees Celsius temperature field for the thermocouple reference end for a long time. It is an ideal substitute for the traditional ice bucket and is very suitable for the verification / calibration of thermocouples. The technical specifications of the equipment are in full compliance with the new regulations "JJF1637-2017 Low-cost Metal Thermocouple Calibration Specification". II. Product technical indicators Model DTBH-01 DTBH-03 Accuracy 0±0.05 0±0.03 resolution 0.001 0.001 stability 0.02/10min
Product Description soil moisture and soil temperature sensor to facilitate soil moisture and soil temperature measurement. The product has high precision, fast response and stable output. It is less affected by soil salinity and is suitable for various soil types. It can be buried in the soil for a long time, resistant to long-term electrolysis, corrosion resistance, vacuum potting, waterproof and rust proof. Soil Moisture Sensor Technical Parameters Technical Parameter The signal output type Output voltage 0-2V output impedance