Hand tool kit, drill bit kit, fastener set.
Hacksaw blades, hole saws, hole saws kit- electrician & plumber, drill blades, tool bits, hacksaw frames, etc Box packing
1. Scope Model DYFZ-A mechanical stage tool is a special tool used to complete the cementing operation in two times. Mainly used in the following circumstances. 1.1. Excessive injection of cement at one shot. 1.2. The formation cannot bear the gigantic fluid pressure. 1.3. Packoff special strata. 1.4. Avoid the occurrence of annual air channeling after the cementing job. 1.5. The considerable temperature difference between the upper and lower section makes it rather difficult to adjust the slurry performance. 1.6. Two-stage cementing for deviated and horizontal wells 2. Structure Model DYFZ-A mechanical stage tool mainly consists of two-stage coupling (body), shut-off baffle, first-stage plug, Free-fall opening plug and closing plug 1. An anti-rotation device is specially developed to prevent the synchronous rotation of closing sleeve and bits. 2. A particular structure is developed to prevent the possible pre-shutoff of closing sleeve. 3. In the closing sleeve of closed circulation hole, close the locking mechanism to prevent closure put on the back, to achieve permanent closure. 4. All accessories, made from premium quality rubber or aluminum material, have very good anti-rotating mechanism that makes drillout easy. 5. Free-fall opening plug and pumping-down opening plug are available to realize mechanical opening. 6. The ID. of upper/lower sub should be the same as that of casing, but smaller than that of closing sleeve, which protects the clos Specifications(in),7" Opening Pressure(Mpa),7 Closing Pressure(Mpa),5.5 Sealing Capacity(Mpa),,25 Rated Load(t),180 Connection Thread,API 7" Max. OD. (mm),208 Drill-out ID. (mm),157 Overall Length (mm),990 Length of first-stage plug (mm),320 Length of closing plug (mm),280
Makita 18v Li-ion 5 Piece Kit Includes the following: Makita Lithium-ion pack includes the following. 18V 2 speed hammer drill/driver (BHP453) 18V Impact Driver (BTD140) 18V Planer (BKP180) 18V Jigsaw (BJV180) 18V Torch(BML185) 3 x 3.0Ah Li-ion batteries 22 Minute charger Carry Bag Makita BHP453 18v LXT Combi Drill: The BHP453 is one of Makita's best-selling cordless drills from the lithium ion range. Featuring hammer action, 13mm keyless chuck, metal 2 speed gearbox and 16 torque setting for screw driving this is a tool well worth considering. The gearbox delivers a high speed of 0 - 1,300rpm and low speed of 0 - 400rpm and boasts maximum torque of 42Nm. This tool is ideal for tradesmen and will give many years of trouble free use. Makita BTD140 18v Impact Driver: The Makita BTD140 18v Li-Ion single speed, reversible impact driver delivering a massive 145Nm of torque the BTD140 is a must have tool. With the emergence in the last few years of the cordless impact driver, screw driving has been taken to a new level. In the past where you have relied on the power of the motor, the strength of the gear box and large capacity batteries to drive home large screws the impact driver has taken the load away from the motor and the gear box and relying more on the impact mechanism to deliver the torque required. With its ¼" hex female drive allowing for a multitude of accessories with a ¼" fitting this tool will become the main tool for many a tradesman, weighing a mere 1.5kg this tool is not only used by people requiring vast amounts of torque but also people with a need for a compact and light screwdriver such as drywall installers with their repetitive screwdriving and kitchen fitters liking the compact design and the very convenient work light illuminating the work piece. Makita BJV180 18v Jigsaw: The Makita BJV180 18v variable speed and tool less blade change jigsaw has a whopping capacity of 135mm in wood and a capacity of 10mm in steel. This machine has features such as a very convenient work light situated by the plunger to illuminate your cutting area, 4 stage orbital action to aid quality and speed of cut, a very efficient dust nozzle supplied as standard and a cover plate which can be added to the base to protect delicate surfaces and only weighing 2.8kg making this a truly fantastic machine. Makita BKP180 18v Lithium-ion Planer: The new Makita BKP180 planer has mains performance from a cordless planer and is the best in its class. Featuring a full width solid 82mm bed with easy change reversible blades and a maximum planing depth of 2mm per pass this is an impressive machine. The top handle features a rubberised grip and is positioned for excellent balance and single handed operation, and the side of the planer features a rebating edge capable of 9mm rebates. This is a fully professional machine and a great addition to any carpenters or general builders tool kit and is also available as a body only for those who would like to add this to their existing kit. Also Included: 18V Torch(BML185) 3 x 3.0Ah Li-ion batteries 22 Minute charger 1 x Standard carry bag Uses Lithium-ion battery technology, which has a number of advantages: the batteries have no memory effect, which allows them to be recharged before they are completely discharged, they are up to 40% lighter than an Ni-CD or Ni-MH battery and they also maintain their charge noticeably longer which provides increased productivity. International Packing Standard
Air hammer The products cover air cutting tools, air die grinder, air drill & screwdriver, air impact & ratchet wrench range, air riveter, air tools kit, etc. Color box
Assembly lines, assembly machines like hydraulic press, servo press, pneumatic press, leak testing machines, jigs & fixtures & automation.
Product description: 1.This machine is designed to conveniently remove broken taps, bolts, drills, etc, The size range is M2 to M48 (M2 - M30 for EDM8C model); 2.This machine works by Spark Erosion principle, electrode size is half of the broken tap size, no contact with the work piece, then no damage to work piece. 3.This machine has a submersible pump that provide the dielectric (Tap water) to the work area, it could remove the disintegrated particles from the work piece to improve the burn time; 4.There is a vibration function that quite improve the processing time; 5.With its small size and light weight, it has special superiority for processing on large size work piece. Separated work head could rotate in any direction, very helpful for complex machining. 6.Automation: Auto feed; Depth setting (stop at a specific depth); Alarm and auto retract. Product specification: Name ----------------------- Broken tap remover SFX-4000B Input Voltage (V)-------------- AC110V 50/60Hz Secondary Output Voltage (V)--- 10-70 Electrode Diameter Range------- 2-24mm Max Travel of working head (mm)- 70mm Max Processing Speed(mm/ min)--- 2mm/min Working Liquid ---------------- Tap water Power Frequency --------------- 50Hz Remove Taps Sizes(mm)----------- more than M2 Machine Size (L*W*H mm) -------- 420*220*370mm Package size ------------------- 528*325*460mm Net weight(KG) ---------------- 24KG Gross weight ----------------- 26KG
Hand tools, hinges, door handle, machine tool, power tools, pneumatic tools, bathroom fittings, manual rice transplanter, brush cutter, battery sprayer, power sprayer, lawn mower, feeder tray, circulation fan, plastic drinker, poultry feeder, carbide tool, cutting oil, hacksaw blade, bandsaw blade, abrasive belts, abrasive roll, abrasive disc, abrasive paper, wet and dry sheet, uv visible spectrometer, soil and water testing kit, turbidity meter, ph meter, bench top dissolved oxygen meter, salinity meter, reagents, yeast, white gut, aquaculture products, herbs, raw herbs, natural herbs and stevia powder, stevia leaf, stevia seeds. stevia plants.
Aluminium die casting components with below processes. heat treatment, shot blasting, powder coating, machining, leakage testing, radiography, parts assembly, copper matalizing, anodizing , magnicoating etc.....
Garden tools, tools such as high pressure, washer, steam cleaner, cordless drill, cordless screw driver, vacuum cleaner, blower, vacuum, hedge, trimmer, chainsaw, grass trimmer, mower, power washer, brush cutter.Sourcing
Hand tools, cordless power tools, air & pneumatic tools, building material, auto repair tool, screwdriver, insert bits, power bits, bit socket, wrench, spanner, impact wrench, ratchet wrench, air hammer, power drill, air grinder, air screwdriver, socket wrench set & socket, pliers, nipper, driver set, drill, caulking gun, car accessories & repair tools, manual hand tools, professional tool set.
Power tools, electric drill, electric mixer, cordless drill, rotary hammer, angle grinder, electric polisher, die grinder, wet grinder, jig saw, china saw, marble cutter, electric blower, circular saw, cut-off machine.
The tools are adjusted. The adjustment capacity for every diameter is 0, 5 mm. The tools have an adjustment mechanism which gives the possibbilty to adjust very high precision measurements. This mechanism provides adjustment precision up to 0, 0050 mm. Yamasa mx type roller burnishing tools for cylindrical shafts can work in h8 tolerances with a single adjustment. These tools are capable to process all kinds of materials with 1400 n/mm2 tensile strength and hardness up to max. 42-45 hrc. Tools work by turning to right. Either tool or workpiece may turn. These tools can be used on universal or cnc lathes, machining centers, drilling machines or other machines which process by turning. The tools can be tied to all machines easly and practically. Tools have rather a long life. It is possible to use the tools for a long time without size change due to abrasion.
Garden tools Woodworking tools We are leading manufacturer and exporter of : 1.Industrial tools / machine tools accessories, 2.Machine accessories, 3.Magnetic and dressing tools, 4.Tap wrenches and die stock handles, 5.Tool holders and boring bars, 6.Cutting tools, 7.Engineer's precision tools, 8.Gauges, 9.Measuring and marking tools, 10.Diy / hand tools / striking tools, 11.Chisels and wrecking bars, 12.Cutters and pincers, 13.Hammers, 14.Spanners, 15.Wrenches and pliers, 16.Punches, 17.Saws and blades, 18.Vices and clamps, 19.Garden / agricultural tools, 20.Spade, fork, shovel, mattock, 21.Woodworking / carpentry tools, 22.Jeweller's and watchmaker's tools, 23.Jeweller's hammers, 24.Pin vices and pin chuck sets, 25.Tweezers, 26.Watchmaker's tools, 27.Leather tool kits, bags, aprons, tool holders, working gloves, 28.Plumbing tools, 29.Lubrication equipments, Export packing
The tools are adjusted. The adjustment capacity is changing according to the diameter and types between 0, 25 mm and 1 mm. The tools have an adjustment mechanism which gives the possibbilty to adjust very high precision measurements. For °5 - °80 mm tools, adjustment precision is 0, 0025 mm and for bigger than °80 mm tools adjustment precision is 0, 0050 mm. Yamasa dx type roller burnishing tools can process the cylindrical holes up to h8 tolerance with a single adjustment. These tools are capable to process all kinds of metallic materials with 1400 n/mm2 tensile strength and hardness up to max. 42-45 hrc. Tools work by turning to right. Either tool or workpiece may turn. These tools can be used on universal or cnc lathes, machining centers, drilling machines, milling machines or other machines which process by turning. The tools can be tied to all machines easly and practically. Tools have rather a long life. It is possible to use the tools for a long time without size change due to abrasion.
Power tools: cordless drills, cordless impact wrenchs/drivers, routary hammers, routers, trimmers, circulars, angle polishers/grinders, die grinders, sanders, chargers.
Cutting tools including drills, taps, dies, reamers, burs, end mills and measuring tools including calipers, micrometers, dial indicators, tool kits, bore gauges, test indicators, depth gauges, height gauges, squares.
Rated Voltage:220V~ Rated Frequency:50/60Hz Rated Input Power:450W No-Load Speed:0-2500r/min Max Impacts Rate:40000min-1 Drilling Cap:Steel/Concrete/Wood ¦¦8/10/16mm G/N:18/15kg Dimension:54.5*36*25CM Nos per package:10pcs
Rated Voltage:220V~ Rated Frequency:50/60Hz Rated Input Power:400W No-Load Speed:0-2500r/min Max Impacts Rate:40000min-1 Drilling Cap:Steel/Concrete/Wood ¦¦8/10/16mm G/N:19/16kg Dimension:54.5*36*25CM Nos per package:10pcs
Rated Voltage:220V~ Rated Frequency:50/60Hz Rated Input Power:450W No-Load Speed:0-2800r/min Max Impacts Rate:37500min-1 Drilling Cap:Steel/Concrete/Wood ¦¦8/10/16mm G/N:19/16kg Dimension:49*36.5*30CM Nos per package:10pcs
