Scrotal Supporter Product Code: SS-01 Description Provide support for the scrotum is specially made from strong stretchable fabric to ensure good support and compression. Soft knit stretchable pouch of polyester and light adjustable waistband won't slip or ride up. The product comes with penile separation pocket and adjustable perineum straps for controlled pressure to the scrotum. It is recommended following surgery and in the treatment of many scrotal problems
Clavicle Brace Product Code: CB-01 Description Magic figure 8 shaped formed with straps and lock applies pressure on clavical bone and hold it together. Soft padding of special foam covered with special fabric gives ultimate comfort to the user. Scientific design of straps allows strong fitting of brace around clavicular region. It is useful in fracture of clavical bone, stopping shoulder and hump back.
Cervical Collar Soft Product Code: CC-01 Description Made of High-density Polyurethane from (P.U.F) and covered with soft cotton knit fabric for comfort. Polythene sheet reinforcement for better immobilization, proper ventilation through eyelet to allow air circulation. Specially designed to support, immobilize or adjust the neck in the flexion, extension or hyperextension position. Velcro closures are used for easy application, removal, and adjustment.
Origin : Brazil. Shipping term : CIF Incoterm 2020. Minimum Order : 25,000 MT Packing : 50 Kg bags, Jumbo bags or in Bulk Contract : 01-month trial + 12 Months QUANTITY (Metricton) SPOT CONTRACT 12 MONTHS CONTRACT From To Deposit SBLC DLC Deposit SBLC DLC 25,000 < 50,000 N/A N/A N/A 450 460 470 50,000
Abdominal Support 8 Product Code: MA-01 Description Specifically designed full Elastic 4 strips abdominal support made from soft cotton with sturdy elastic for contour and anterior compression over the abdomen. Velcro closures provide close contour fitting around the waist, It can be easily applied, adjusted, and removed. Full Elastic Effective in post-operative conditions of the abdomen. As a Tummy Trimmer Belt Umbilical and Ventral Hernia Support. Post Delivery Cases. It allows the patient to cough and expel phlegm without causing any pain.
Mowell Central Venous Single Lumen Catheter 16G X 6.29 Product Code: MW-LUMEN-01 Specifications: Guide wire Marked : 032"(.81mm) dia "J" Tip (Y-Shape) introducer Needle : 18G X70mm | Fastener Catheter clamp Normal Syringe 5ml | Dilator : 6.5F X 10cm | Catheter : clamp Injection cap | injection needle | Scaple # 11 Size/Strength: SIZE : Single , Double and Triple Single Lumen Central Venous Catheter Set Centrally inserted, single lumen central venous catheter. For administration of hyperosmolar solutions, measuring CVP, hemodialysis, plasmapheresis, rapid infusion of fluid among other uses. Mowell provides the benefit of polyurethane catheter which is soft, kink resistant, extremely biocompatible with excellent wear properties and elastic memory.
MAYBELLINE Instant Anti Age Eraser Eye Concealer-Choose your Shade-NEW Sealed 00 Ivory, 01 Beige Rose, 02 Beige NU, 03 Clair, 04 Miel (Honey), 06 Jaune Neturalisant, 07 Sable, 10 Caramel, 121 Miel Clair Ideal for dark circles: Targets dark circles, fine lines, redness and blemishes in one handy swipe. The smooth, ultra-blendable formula glides on to skin effortlessly and doesn't sit in lines Skincare benefits: Eraser eye concealer is infused with goji berry extract and haloxyl giving skincare benefits in a makeup product. These ingredients help reduce the appearance of dark circles, fine lines and blemishes Iconic cushion tip applicator: This iconic anti-microbial cushion tip applicator has been copied throughout the years but never bested. It means you only need your eraser eye concealer when you are out and about for handy touch up's on the go Multi-use product: Not only does this concealer cover up dark circles, blemishes, and fine lines - you can also use it to conceal or contour with different shades. Use darker shades to contour cheekbones and use lighter shades to highlight. This handy product does it all Contact us for more details
Cocoa Cake is rich in nutrients, protein & carbohydrates, has a strong natural cacao aroma and is commonly used in chocolate and beverage production. 1. Product Name: Natural Cocoa Cake 2. Ingredients: 100 % from cocoa bean 3. Intended Use: Raw material for cocoa powder. 4. Organoleptic Description: Appearance Kibbled Color Light Brown Taste Typical Cocoa, no off flavors Odor Rich Cocoa Aroma, no off flavors 5. Physical and Chemical Parameters Specification: Moisture % 5.0 max Fat Content % 10 -12 pH - 5 - 6 Lead (Pb) mg/kg 1.0 max Cadmium (Cd) mg/kg 0.5 max Mercury (Hg) mg/kg 0.03 max Tin (Sn) mg/kg 40.0 max Arsen (As) mg/kg 1.0 max 6. Microbiological Parameters Specification: Total Plate Count cfu/g 5000 max Yeast cfu/g 50 max Mould cfu/g 50 max Enterobacteriaceae /g Negative Salmonella /25 g Negative E.coli APM/g < 3 7. Standard: Based on SNI No. 01-7553-2009 8. Packaging: Multi-layer paper bags, food grade, with plastic polyethylene respiration in them. Nominal weight of 25 kg / net bag. 9. Optimum Storage Conditions: Store in a cool dry place away from strong odours, protected against water and heat. It is recommended to: Store in areas of low relative humidity, best under 60%. Store at relatively cool temperatures, preferably maximum 25C. Keep free from foreign odors such as coffee, tea, spices, chemicals etc. Transport temperatures should be ambient , recommended below 25C. 10. Shelf Life: Two years under recommended storage conditions.
Cocoa butter is used to make the highest quality of Chocolates and increasingly used in pharmaceuticals, cosmetics & personal care. 1. Product Name: Natural Cocoa Butter 2. Ingredients: 100 % from cocoa fat 3. Intended Use: Chocolate manufacturing, Cosmetics and other Cocoa confectionary. 4. Organoleptic Description: Appearance transparent and clear, with no visible sediments. Color Light Yellow Taste Full Cocoa Taste, no off flavors Odor Rich Cocoa Aroma, no off flavors 5. Physical and Chemical Parameters Specification: Free Fatty Acid, as Oleic Acid % 1.75 max Moisture % 0.2 max Iodine value gI2/100g 33-42 Peroxide value meq O2/kg 4 max Saponification value mg KOH/g 188-198 Unsaponifiable matter % 0.35 max Melting point C 31 - 35 Refractive Index (ND40 C) 1.456 - 1.459 Metal Contamination Lead (Pb) mg/kg 0.5 max Cadmium (Cd) mg/kg 0.5 max Tin (Sn) mg/kg 40 max Arsen (As) mg/kg 0.1 max 6. Microbiological Parameters Specification: Total Plate Count cfu/g 5000 max Yeast cfu/g 50 max Mould cfu/g 50 max Enterobacteriaceae - Negative Salmonella - Negative E.coli APM/g Negative 7. Standard: Based on SNI No. 01-3748-2009 8. Packaging: Carton boxes as secondary packaging, odorless and food grade specifications, with plastic High Density Polyethylene (HDPE) inside as primary packaging. Nominal weight of 25 kg / box net. 9. Optimum Storage Conditions: Store in a cool dry place away from strong odours, protected against water and heat. It is recommended to: Store in areas of low relative humidity, best under 60%. Store at relatively cool temperatures, preferably a maximum 25C. Keep free from foreign odors such as coffee, tea, spices, chemicals etc. Transport temperatures should be ambient, recommended below 25C. 10. Shelf Life: Two years under recommended storage conditions.
R50- R65 - IRSI CODES; The chemical composition is the standard for R-50 R-65 Tee rails original weigh 50 pounds per yard or heavier,6 meters long and over. Material to be suitable for rerolling into bars and shapes. Free from bent and twisted rails, frog, switch and guard rails, rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from end of the piece of rail. Free from Fluff, Nonferrous inclusions, excessive rust and other impurities. Free from war and explosives, shells, cartridges, other arms and ammunitions used or otherwise and any closed containers. Free from any radioactive materials, any harmful chemicals, substances, and coatings any organic waste any other harmful substances. Dirt, dust, rust fluff and other impurities not allowed over 05 %. The rails are to be neatly bundled and secured with iron wire or straps, provided with adequate lifting hooks. Individual bundles not to exceed 5 MTW. Used Rails R50 - R65 Chemical Composition Used Rails; C: 0, 54 - 0,82 Si: 0,18-0,40 Mn: 0, 60-1, 05 S: 0.04 max P: 0,035 max As.: 0, 01 max of Mass share Norms: R-50 GOST7173-75 and R-65 GOST-8165-75 The scrap consists of R-50 (51, 67 kg/m) R-65 (64,72 kg/m) Used Rail ISRI 27-29 ISRI-CODES; (27) Rail, Steel No. 1. Standard section tee rails, original weight 50 pounds per yard or heavier, 10 feet long and over. Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switch, and guard rails, or rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from the end of the piece of rail. (28A) Rail, Steel No. 2 Cropped Rail Ends. Standard section, original weight of 50 pounds per yard and over, 18 inches long and under. (28B) Rail, Steel No. 2 Cropped Rail Ends. Standard section, original weight of 50 pounds per yard and over, 2 feet long and under. (28C) Rail, Steel No. 2 Cropped Rail En ds. Standard sec t ion, original weight 50 pounds per yard and over, 3 feet long and under. (29) Rail, St eel No. 3.Standard section tee, girder, and/or guard rails, to be free from frog and switch rails not cut apart, and contain no manganese, cast, welds, or attachments of any kind except angle bars. Free from concrete, dirty and foreign material of any kind. The rails can be cut to the length the buyer wants
Appearance: White Powder Solubility: It is soluble in ester, ketone, aromatics and alcohol ethers. It is insoluble in 200# gasoline and alcohol. Characters: 1, Good adhesion and High hardness; 2, Good compatibility with CAB or NC; 3, Non yellowing and good resistance to weather; 4, Good compatibility with other resins; 5, Good adhesion with plastic substrate; Specification: TYPE NO.: AR-001 AR-002 AR-66 AR-70 AR-800 ( ALCOHOL SOLUBLE ) Solid Content (%) 100 100 100 100 100 Softening Point (�ºC) 115----130 115----128 130----150 150----160 108 Acid Value (mgKOH/g) 18----35 18----35 3----6 5----8 4.29 Tg (�ºC) 45 40 50 61 39.69 Viscosity (25�ºC mpa.S) 250--450 250--450 2000--4000 250--0450 100--200 Application: AR--001 Exterior wall coating, fire retardant coatings AR--002 Road marking paint, floor coatings AR--66 Inks, Plastic coatings, container coatings AR--70 Plastic coatings, PVC Inks AR--800 Ink, plastic coatings, environment--friendly coatings Packing: 25kgs net per bag, 12500kgs/1x20`gp with pallet. Storage: Should be stored in dry, aeration area, avoiding the wet. The valid store period is two years.
1.Aluminum sulfate is an inorganic substance with chemical formula of Al2(SO4)3 and formula amount of 342.15. 2.It is a white rasp-crystal crystalline powder with a density of 1.181g/ (25). 3.It is used as a precipitant for rosin wax emulsion and other adhesive materials in papermaking industry, as a flocculant in water treatment, and also as a retention agent for foam fire extinguishers to produce Aluminum white raw materials, oil decolorization deodorant and some pharmaceutical raw materials can also make artificial stones and advanced ammonium alum, accounting for about 50% of the total production of aluminum sulfate is used in papermaking, 4.The second largest use is in drinking water industrial water and industrial wastewater treatment as a flocculant, accounting for about 40% of the total production of aluminum sulfate When aluminum sulfate is added to such water, colloidal aluminum hydroxide flocs, which can absorb and precipitate bacterial colloid and other suspended matter, can be formed and used in drinking water treatment to control the color and taste of the water.
Arbutin is a hydroquinone glycoside compound, its chemical name is 4-Hydroquinone-alpha-D-glucopyranoside (4-Hydroquinone-alpha-D-glucopyranoside), which exists in plants such as bearberry and bilberry. It is a natural whitening active substance emerging that is non-irritating, non-allergenic and compatible. There are two structural and functional functional groups in the molecular structure of arbutin: one is glucose residue; the other is phenolic hydroxyl group. The physical state of �±-arbutin is white to light gray powder, which is easily soluble in water and ethanol.
Our Plates, sheets and coils are made of Stainless Steel, Nickel Alloys, Carbon Steel, Alloy Steel, and Other Ferrous & Non-Ferrous Metals. They are used in a range of applications like structural and mechanical & general engineering purposes. They are designed to withstand tremendous amount of weights and pressure. Our plates, sheets and coils are testimonials of our quality standards. Our comprehensive range includes alloy steel coil, carbon steel coil and many more. The standard sizes range from 0.5 mm To 200 mm thick in 1000 mm TO 2500 mm width & 2500 mm to 12500 mm Length available with NACE MR 01-75. Range :0.5 mm To 200 mm thick in 1000 mm TO 2500 mm width & 2500 mm to 12500 mm Length available with NACE MR 01-75.Ã? Range : 0.5 mm To 150 mm thick in 1000 mm TO 2000 mm width & 2500 mm to 6000 mm Length available with NACE MR 01-75. Type : Sheet, Plates, Coils, Flat, Strips, Profile, Blank ,Circle, Ring etc. Form : Foils, Shim Sheet, Rolls, Perforated Sheet, Chequered Plate. Finish : Ã?» 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) H, 904L. Ã?» Hot rolled plate (HR), Ã?» Cold rolled sheet (CR) Stainless Steel Plate : Stainless Steel Plate And SheetsASTM / ASME SA 240 GR. TP 304 , 304L , 304H, 309S , 309H , 310S, 310H , 316 , 316L, 316H , 316Ti , 317L , 321 , 321H , 347 , 347 H , 409, 410S, 420, 430, 904L Value Added ServicesÃ?» Cutting Ã?» Bending Ã?» Forging Ã?» Rolling Ã?» Heat Treatment Ã?» Minor Fabrication Test Certificate : Mill Test Certificate as per EN 10204 / 3.1BÃ?Â
Item No.: 9150-01 Size: 39-46 (5-12) Soles: 9150 Nitrile Rubber ADDITIONAL PRODUCT INFO OVERVIEW Product Name: Military Boot Standard : S1 Sizes: 39-46 (5-12) Colors: Black AVAILABLE OPTIONS Product Number: 9150-01 Sole: Nitrile Rubber Sole Color: Black MATERIALS Upper: Water Repellant Printed Leather Footbed / Socks: Padded Antistatic Sole : 9150 Nitrile Rubber Certified : NA BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No .: 9150-01 Size : 39 - 48 (5-14) Soles : 9150 Nitrile Rubber SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Excellent Shock Absorber Fine Leather Light Weight Slip Resistant Sole Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Boot Standard : S1 Sizes : 39 - 48 (5-14) AVAILABLE OPTIONS PRODUCT NUMBER: 9150-01 Standard : S1, S1p, S2, S3 Toe : Steel Midsole : Steel Color : Black / Brown MATERIALS Upper : Water Resistant Printed Leather Toe : Steel Midsole : Steel Footbed / Socks : Cambrella and EVA. Antistatic Sole : 9150 Nitrile Rubber Certified : N/A BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No .: 7198-01 NR Size : 39 - 48 (5-14) Soles : 7198 Nitrile Rubber SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Breathable Excellent Shock Absorber Fine Leather Light Weight Oil Resistant Slip Resistant Sole Steel toe / Kavlar Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Shoe Standard : S3 SRA Sizes : 39 - 48 (5-14) Colors : Black AVAILABLE OPTIONS Product Number : 7198-01 Nr Standard : S1, S1p, S2, S3 Toe : Steel Midsole : Steel Color : Black / Brown MATERIALS Upper : Buff Barton Lining : Cambrella Toe : Steel Midsole : Steel Footbed / Socks : Moulded Antistatic Sole : Single Density Nitrile Rubber Certified : N/A BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No.: 3003-01 Size: 36 - 48 Soles : 3003 Dual Density SAFETY FEATURES Abrasion Resistant Anti Skid Anti Static Insole Breathable Fine Leather Heat Resistant Sole Light Weight Oil Resistant Shock Absorber Steel Midsole Steel toe / Kavlar Steel Toe Cap Water Proof ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Boot Standard : S3 SRC Sizes : 36 - 48 Colors : Black / Brown AVAILABLE OPTIONS Product Number : 3003-01 Standard : S1, S1P, S2, S3 Toe : Steel / Composite Midsole : Steel / Kevlar Sole : Dual or Mono Color : Black / Brown MATERIALS Upper : Buff Barton Lining : Cambrella Toe : Steel Midsole : Steel Footbed / Socks : Moulded Antistatic Sole : Double Density PU/PU Certified : EN 61340-4-3:2002 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No. : 2080 - 01 Size : 36 - 47 (5-13) Soles : 2080 Dual Density SAFETY FEATURES Abrasion Resistant Anti Static Insole Breathable Excellent Shock Absorber Fine Leather Light Weight Shock Absorber Slip Resistant Sole Steel Midsole Steel toe / Kavlar Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name: Safety Shoe Standard : S3 Src Sizes : 36 - 47 (5-13) Colors : Black / Brown AVAILABLE OPTIONS Product Number : 2080 - 01 Standard : S1, S1P, S2, S3 Toe : Steel / Composite Midsole : Steel / Kevlar Sole : Dual or Mono Color : Black / Brown MATERIALS UPPER: Buff Barton LINING: CAMBRELLA TOE: Steel MIDSOLE: Steel FOOTBED / SOCKS: Moulded Antistatic SOLE: Double Density PU/PU CERTIFIED: EN 61340-4-3:2002 BOOT CARE Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. The shoe should be used for the purpose for which it has been designed. Some facts about feet- Most of the muscles are in your feet. Thus you should wear comfortable shoes. The body temperature is regulated through your feet Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
