Portable Rolling Track Gauge Portable Rolling Track Gauge is mainly used for railway track gauge and super-elevation(cant), check rail gauge and back to back distance measurement.It can be used for track inspection and fine adjustment of rail gauge.This product has the advantages of fast measuring speed, stable pushing rod, easy to carry,and night-time and tunnel work,legible even in direct sunlight are supported.It is an ideal measuring tool for track fine-tuning, track construction,inspection and track laying. Features The benefits of our rolling gauge : 1. Measure the track gauge, cant without bend over your back. 2. Light weight : around 6.5kg , one person operation. 3. BT connection, data uploading and analysis system. 4. High working efficiency. Save your man power. ( 1 man with 1 rolling gauge = 4 man with 4 normal digital track gauge) Specification Model (1435mm) GJC-JJG0 Track gauge 1410-1470mm Superelevation measuring range -185~+185mm Display mode OLED display and hand-held terminal display Supply Voltage DC3.4Vc5.2V (rechargeable battery) Superelevation division value 0.05mm Working temperature -30+55 Insulation performance 1M© Track gauge division value 0.01mm Superelevation division value 0.05mm Track gauge max indication error ±0.25mm Superelevation max indication error ±0.3mm Length 1700mm Net Weight 6.5kg
2.4 Inch 240x320 QVGA 14PIN SPI4 IPS 250nits TFT LCD Display Module EX02401-A01 is a 2.4 inch, IPS active matrix TFT LCD module with transmissive mode. The module dimension is 42.72(W)60.40(H)mm; active area 36.72(W)48.96(H) mm (2.4"diagonal). Its resolution is 240x320 pixels (width 240pixels x height 320 pixels) and every pixel is made up of three vertical strips of Red, Green and Blue dots. General Specifications of 2.4 Inch 240x320 QVGA 14PIN SPI4 IPS 250nits No. Item Specification 1 LCD size 2.4 inch 2 Resolution 240(RGB)320 3 Active area 36.72(W)48.96(H) 4 Module size 42.72(W)60.40(H)2.21(T)(Exclude FPC) 5 Viewing Direction All 6 Driver IC ST7789V 7 Polarizer Transmissive 8 Interface 4-SPI 9 Brightness 250cd/m2 10 Back Light White 11 Pixel arrangement RGB vertical stripe Outline Dimension of 2.4 Inch 240x320 QVGA 14PIN SPI4 IPS 250nits Features of 2.4 Inch 240x320 QVGA 14PIN SPI4 IPS 250nits The module features wide viewing angle thanks to the IPS panel which is one of the most popular techniques on the market now. This china 2.4 tft display module has built-in IC ST7789V supporting SPI interface. The brightness is 250 cd/m2 with contrast ratio 800:1. Operating temperature covers from -20~+70, storage temperature range is from -30~+80..This single-display module is suitable for use in industry, household appliances, toys and medical treatment,small consumer electronics and other fields. As one of the most professional 2.4 tft manufacturers, we provide china display tft lcd, 2.4 inch lcd china, china 2.4 inch lcd, china lcd panel, etc. For 2.4 inch lcd price or more information, please feel free to contact us!
EX02403-A01 2.47 Inch Circular LCD Panel/Screen/Display is a color active matrix TFT-LCD Panel using amorphous silicon TFT's (Thin Film Transistors) as an active switching devices. This model is composed of a TFT-LCD Panel, a driving circuit and a back light system. It is a transmissive type display operating in the normal black. This TFT-LCD has a 2.47 inch diagonally measured active area with resolutions 480 horizontal by 480 vertical pixel array. Each pixel is divided into Red, Green, Blue dots which are arranged in 2 domain stripe and this panel can display 16.7M colors.It is Suitable for vehicle mounted, handheld terminal, industrial LCD, etc. General Specifications of 2.47 Inch 480x480 Round 35PIN MIPI 400nits-1 No. Item Specification 1 LCD size 2.47 inch 2 Resolution 480x480 3 Active area 62.6462.64(circle)mm 4 Module size 69.19(H)71.74(V)2.45(D) mm 5 Interface MIPI 6 Brightness 400cd/m2 7 Contrast Ratio 1000:1 8 Driver IC HX8379-C 9 Polarizer Transmissive 10 Display Colors 16.7M 11 Viewing Direction All 12 Weight 25g (Max) Outline Dimension of 2.47 Inch 480x480 Round 35PIN MIPI 400nits-1 As a professional tft lcd screen factory, we provide china custom lcd display, circular lcd display module, circular tft, circular lcd panel, circular display screen, circular tft display, circle lcd display, circular lcd screen, circular lcd, china lcd display tft, etc. For more information, please feel free to contact us!
EX02002-A01 is a 2.0inch, IPS TFT LCD module with transmissive mode. Its resolution is 480 360dots (480 vertical by 360 horizontal pixel) and every pixel is made up of three vertical strips of Red, Green and Blue dots. This miniature 2.0 inch TFT module has built-in IC ST7701S supporting MIPI serial interface. The brightness is 250 cd/m2 with contrast ratio 1000:1.Operating temperature covers from -20~+70, storage temperature range is from -30~+80.This single-display module is suitable for use in industry, household appliances, toys and medical treatment,etc. General Specifications of 2.0 Inch 480x360 HVGA 24PIN MIPI IPS 250nits No. Item Specification 1 LCD size 2.0inch 2 Resolution 480(RGB)360 3 Active area 40.8(W)30.6(H) 4 Module size 49.1(W)45.96(H)2.53(T)(Exclude FPC)mm 5 Interface MIPI1 6 Polarizer Transmissive 7 Brightness 250cd/m2 8 Pixel arrangement RGB vertical stripe 9 Back Light 450cd/m² 10 Viewing Direction All 11 Contrast Ratio 1000:1 As a professional china lcd module manufacturer, we provide china lcd display panel, dsi tft display, dsi tft, dsi lcd panel, mipi dsi lcd panel, mipi lcd panel, mipi tft, hvga lcd, hvga tft, etc. For more information, please feel free to contact us!
EverFlon ®PTFE Dispersion Fine Powder F500 is a soft white polymer made from a water-based dispersion of PTFE. These fine powders have the lowest coefficient of friction, highest heat resistance, chemical resistance, electrical properties and non-stick properties of all fluoropolymers. It has the unique ability to shear a lubricating paste by extruding it into a bonded fiber matrix with useful structural integrity. EverFlon ®PTFE F500 is designed for machining at medium and high pressure rates from 100:1 to 600:1. It is particularly suitable for the production of high quality tubes, spiral tubes and wire coatings. This grade is also well suited for post-processing techniques such as flanging, welding, blow molding and turning. Processing suggestion EverFlon ®PTFE F500 is extruded using liquid processing AIDS such as naphtha. During the paste extrusion process, the powder is mixed with a lubricating agent and then compressed under light pressure (1.5-2.0 MPa[220-290 psi]) into a cylindrical pre-formed bad material. The preformed blank is placed into the barrel of the paste extruder, where the composition is passed through a finishing die under high pressure to produce foaming, tubing or wire coating. After extrusion, the product has a low density but coherent fiber structure. PTFE F500 is usually processed under heat in a step-by-step process into solid resin products, such as tubes. Heating is carried out in two steps, either simultaneously with extrusion or separately. Usually the lubricant must be removed first by heating in a temperature range of 100-300°C(212-572°F). A sintering step is then performed to melt the resin above its melting point of approximately 342°(648°F) and produce a non-porous solid PTFE resin.
Fluoron PTFE fine powder F100 is a soft, white polymer made from an aqueous dispersion of PTFE. These fine powders have the lowest friction coefficient of all fluoropolymers and the highest heat resistance, chemical resistance, electrical properties and non-stick properties. It has the unique ability to shear a lubricating paste by extruding it into a bonded fiber matrix with useful structural integrity. Fluoron PTFE F100 is designed for machining with low compression ratios of 10:1 to 300:1. It aims to promote the production of high-quality, low-density tapes Processing suggestion PTFE F100 is extruded using liquid processing AIDS, such as naphtha. During the paste extrusion process, the powder is mixed with a lubrication agent and then compressed under light pressure (1.5-2.0 MPa[220-290 psi]) into a cylindrical preformed blank. The preformed blank is placed into the barrel of the paste extruder, where the composition is passed through the finishing mold under high pressure to produce foaming, tubing or wire coating. After extrusion, the product has a low density but coherent fiber structure. PTFE F100 is usually further processed under heat into solid resin products, such as tubes. Heating is carried out in two steps, either simultaneously with extrusion or separately. Usually the lubricant must be removed first by heating in a temperature range of 100-300°C(212-572°F). A sintering step is then performed to melt the resin above its melting point of approximately 342°C(648°F) and produce a non-porous solid PTFE resin.
Phone Case with Card Holder Sinco is a professional manufacturer of leather phone cases. We offer a wide range of phone case styles, including cardholder phone cases, flip phone cases, cross-body phone cases, and more. Our commitment is to provide you with a comprehensive leather phone case solution. You can customize them with any company logo or design. We offer a wide range of materials and customization options for these custom leather phone cases, which will depend on your specific requirements. We have a team of experienced designers ready to bring your unique inspirations and creativity to life. If you have a specific design in mind, we can help you turn it into a reality. Alternatively, if you're interested in purchasing our best-selling phone case styles directly, please get in touch with us to request product brochures and pricing information. Phone Case Card Holder crafted from high-quality leather materials, provides reliable protection for your device but also features a built-in card holder. Say goodbye to the hassle of rummaging through your wallet â?? now you can keep your credit cards, ID, or business cards securely tucked away right alongside your phone. The cardholder is discreetly integrated into the back of the case, maintaining a slim and stylish profile. The precise design ensures easy access to your cards while maintaining a secure grip on your phone. Whether you're heading to a meeting, a night out, or simply running errands, this phone case card holder lets you travel light and stay organized.
5052 aluminum plate is an AL-Mg alloy aluminum plate, which combines the advantages of 3 series anti-rust aluminum and the excellent formability of 5 series. It has moderate strength, especially fatigue resistance: high plasticity and corrosion resistance, cannot be strengthened by heat treatment, and is durable. Good corrosion, good weldability, poor machinability, can be polished. Application areas: transportation vehicles, ship sheet metal parts, aircraft fuel tanks, etc. 5083 aluminum plate belongs to the Al-Mg series alloy and is widely used. Especially in the construction industry, this alloy is inseparable and it is a promising alloy. It has good corrosion resistance, excellent weldability, good cold workability, and medium strength. Application fields: ships, automobiles, aircraft welding parts, subway and light rail, etc. 5754 aluminum coil is a typical aluminum plate among Al-Mg alloys. It has the characteristics of medium strength, good corrosion resistance, weldability and easy processing and forming. Application areas: automobile manufacturing industry, doors, bodies, seals, etc. 5182 aluminum plate has good corrosion resistance, excellent weldability, good cold workability, and medium strength. Application areas: automobile body panels, control panels, reinforcements, automobile fuel tanks, electrical appliance casings, etc. Status: O, H32, H34, H36, H38, H111, H112 Surface treatment: smooth aluminum, mirror, patterned aluminum plate Packaging and transportation: simple packaging, refined packaging, logistics packaging, foreign trade shipping packaging (fumigated wooden pallet optional) Please contact us for specific parameters and we will give you a detailed quotation.
Transformer aluminum foil is a key component of insulation and conductivity in the transformer, which directly affects the quality of the transformer. Transformer aluminum foil and strips generally use 1060 aluminum foil, 1070 aluminum foil and 3003 aluminum foil, which belong to the conventional series in the aluminum strip family. 1 series and 3 series aluminum plates are ordinary aluminum plates and have a price advantage over 5 series and 6 series products. The thickness of aluminum foil for transformers is generally between 0.02-0.055mm. Transformer foil is manufactured using a specialized rolling process to achieve the required thickness and mechanical properties. Foils can undergo additional treatments, such as annealing, to improve their ductility and conductivity. Transformer aluminum foil specifications: Alloy: 1050,1060,1070,3003 Temper: O Thickness: 0.014-0.2mm Width: 100-1700mm Length: 100-16000mm Description: Smooth surface, no scratches. The edges can be chamfered (rounded corners, rounded edges), without burrs, and the resistivity is less than or equal to 0.028. Packaging: wooden pallet/fumigation-free wooden pallet, inner diameter 300mm or 500mm. Packed in moisture-proof paper with a paper sleeve in the middle Application: Winding conductors, insulation and shielding Transformer aluminum foil characteristics: 1. It has excellent electrical properties, more efficient transmission and lower loss. 2. Aluminum foil can effectively dissipate heat, keeping the transformer from overheating and working stably under high load conditions. 3. High insulation strength improves the reliability of the transformer. 4. Light and easy to transmit, making transportation and installation more convenient and reducing costs. 5. Environmental protection and energy saving, helping to achieve green power transmission.
The lightness and excellent thermal conductivity of aluminum alloy make it a high-quality material for making cookware, especially suitable for cooking environments that require rapid heating and uniform heat distribution, such as outdoor cooking or home use. Aluminum alloys such as 1050, 1060, and 3003 are usually used . It is an excellent choice for manufacturing cookware due to its thermal conductivity, lightweight durability, food safety, ease of processing and cost-effectiveness. Characteristics of aluminum discs for cookware: 1. High thermal conductivity: Aluminum can dissipate heat evenly and quickly. This ensures food cooks evenly and prevents burning or overheating. 2. Lightweight: Aluminum is lightweight compared to other metals used in cookware manufacturing, such as cast iron or stainless steel. This makes aluminum cookware easy to handle and operate, especially for tasks that require frequent stirring or turning. 3. Safety and hygiene: It is safe for food contact and will not release harmful substances into food during the cooking process, ensuring the safety of the final dish. 4. Corrosion resistance: Aluminum disc 1050 has good corrosion resistance, which is very important for cookware exposed to moisture, acid and other food ingredients. Proper care and maintenance can further extend its lifespan. 5. Excellent formability: Aluminum is highly formable, allowing manufacturers to shape it into a variety of cookware designs, including pots, pans and trays. This versatility enables the production of cookware in different sizes, shapes and functions to meet consumer demands. 6. Affordable: Aluminum is low-cost compared to other materials used in cookware production, and its relatively low cost makes it an attractive option for both manufacturers and consumers.
DDS5558 Single Phase Meter is a kind of new style single phase two wire active energy meter, it adopts micro-electronics technique, and imported large scale integrate circuit, use advanced technique of digital and SMT techniques, etc. It has minimum size, and also a new single phase two wire active energy meter. It has already passed the test of the international authority CE. The meter completely accords with relevant technical requirements of class 1 single phase active energy meter stipulated in international standard IEC 62053-21. It can accurately and directly measure 50Hz or 60Hz active energy consumption from single phase AC electricity net. This meter has white backlight source eight digits LCD monitors shows the active energy power consumption. It has following features: Good reliability, small volume, light weight, specious nice appearance, convenient installation, etc. Features: Bi-directional total active energy measurement 25mm standard DIN rail installation, complying with standard DIN En50022. Single pole width (Modules17.5mm), complying with standard DIN43880. Small modular size, DIN rail mounted. Easy installation to distribution boards, load center, miniature & etc. by identifying where energy is being used. Application: All power parameter measurements; Energy measurement and electrical fire monitor and control; Replacing the three-phase power meter, three-phase electricity transmitter; Transformers, generators, capacitors, and electric motors distributed detection; Medium and low-pressure systems; SCADA, EMS, DCS integrators.
Product Details Short Description: (1)Pulp Material: wood Pulp (2)Coating: coated (3)Paper Material: white Kraft paper,brown Kraft paper in food grade (4)Coating Material: PE,PP,PVC,PET,OPP and so on. (5)Feature: waterproof,Grease-proof (6)Coating Side: single side or double side (7)Use:food wrapping, making paper cups,printing (8)Quantity Control: Paper Gram:+5%ï¼?PE Gram:12g, Thickness:5%,Moisture:6%-8%,Brightness:>78 (9)Bagasse pulp base and100% wooden pulp PE coated paper, Food Grade, eco-friendly. More advantages for our paper board PE Laminated on one side or two sides are allowed The base paper is virgin pure pulp unbleached Kraft paper board( top food grade in China market ) High thickness and low thickness is available ( 90g to 400g are popular Grammage ) Food grade raw material is safe, harmless, approved by food grade Security,barrier,non-leakage,moisture-proof, strong sealing Multi-layers lamination makes the bags high barrier against light, oxygen, moisture Strong sealing strength; bonding strength and excellent compression strength Our company advantages for you Top-quality in china market Good service always for you,7*24 hours Short date of delivery Small MOQ welcome and accepted Free sample for you to test the quality before top order. Packaging & Shipping Solutions: Die-cutting Service Cuts a roll of paper into sheets of uniform dimension: Fully Automatic High Efficiency High Precise Available in Various Different Shapes Solutions: Corrugating Service Available in E flute and F flute, two layerscorrugatedand three layers corrugated paper are available High Strength High Rigidity Extreme Durability Effective Protection Effective Heat Insulation Samples by Air Express(DHL,UPS,FedEx),Top order by Sea
HY-1040 Molecular formula H2[AI2O3·mSiO2(OH)2]·nH2O Properties This product is a sub-white powder, which is not dissolved in water, oil or organic solvent. It has strong properties as cation exchange capacity, selective adsorption, hydrophilic property, surface activity and catalysis, It can adsorb and eliminate mineral materials as pitch, neutral colloid, sulfide and olefinenaphthenic acid in lubrication to improve the durability and photo-stability of the lubricant and to increase the ability of corrosion-resisting, and can also absorb and eliminate the pigment, aflatoxin and the carcinogenic substance of 3-4 benzpyrene in vegetable oil, in addition, it has strong ability of oil, in addition, it has strong ability of oil decolorization, high speed of filtering oil and low oil retention of filter cake. Functions�¯�¼?it's widely used in the absorption and refinement of lubricant, paraffin wax, and vaseline, the decolorization of animal and vegetable oil, and the purification of honey, wax and glycerine. Specifications Performance indicators of activated clay Technical requirements for active clay manufacturers' products: 1, appearance: grey or light fine powder. 2, water (2 hr. 105 C) : 12% 3, decoloring force: 154 4, active degree: 180 mol/kg 5, particle size (0.076 mm) : 95% 6, free acid (in - H2SO4) : 0.20% 7, heavy metal content (Pb) : 10 mg/kg 8, arsenic content: 3 mg/kg
Switch Rail Height Gauge Switch Rail Height Gauge is mainly used to measure the descent height value of the switch rail relative to the basic rail and point rail relative to the wing rail This instrument has the features of high measuring precision convenient calibration simple structure light weight and easy to carry Reasonable switch rail height can not only ensure train running safely and smoothly but also reduce the interaction between wheel and rail effectivelyreduce the dynamic stress of track structure keep the track in good geometric state thus reduce the maintenance workload BENEFITS 1 Smart and Portable The size of the horizontal rod is about 300mm and the vertical rod is about 250mm The ruler body is smart and portable 2 LCD Digital display easy to read 3 High Accuracy The measurement accuracy can reaches 001mmThe measurement results can be display instantly 4 Multifuncional Wide range of application It can measure five items to meet different requirements 1 The descent height value of the switch rail 2 The descent height value of the point rail 3 The height of check rail 4 The height of switch roller 5 This device is equipped with a simple calibrator could be used for quick calibration before each use 6 The measure head could be moved from side to sidesuitable for all kinds distance tracks Measure head could move range is 60mmcould be used for measuring different distance switch rail and point rail 7 Replaceable measuring probe suitable for different usage When measuring the height of the switch rail and point rail relative running rail using the flat measuring probe When measuring the rail surface dent using the sharp measuring probe 8 Metric Imperial unit Model LJJGJDI Type Switch Rail Gauge Material Stainless Steel Dimensions L x W x H 27022180mm Measure range 530mm Accuracy 005mm Resolution 001mm Working humidity 93RH Size 27022180mm Weight 045kg Power Button battery15V
1) Good hygienic performance: PE pipe processing without adding heavy metal salt stabilizer, non-toxic material, no scaling layer, no bacteria, a good solution to the secondary pollution of urban drinking water. 2) Good corrosion resistance: Except for a few strong oxidants, it can resist the erosion of various chemical media; no electrochemical corrosion. 3) Long service life: Under rated temperature and pressure conditions, PE pipeline can be used safely for more than 50 years. 4) Better impact resistance: PE pipe has good toughness, high impact strength, heavy objects directly pressed through the pipeline, will not lead to pipeline rupture. 5) Reliable connection performance: PE pipe hot-melt or electric-melt interface strength is higher than the pipe body, the joint will not be broken due to soil movement or live load. 6) Good construction performance: light pipeline, simple welding process, convenient construction, low comprehensive cost of the project. Pipeline Connection: 1) Electric-thermal weldability: The straight pipe and straight pipe, straight pipe and pipe fittings are connected by special electric-thermal welder. Usually used for pipes under 160mm. 2) Hot-melt butt joint: Use special butt welder pipe connection, generally used for more than 160mm pipes. 3) Steel-plastic connection: flange, thread and other methods can be used to connect. Application: Hesu Pipe Industry's high-performance high-density polyethylene water pressure pipes are suitable for municipal and industrial transmission systems for potable water, sewer, drain, mining, irrigation, and reclaimed water.
This smokeless Hypertherm Gantry CNC Plasma Cutter is mainly used for cutting the Steel/Iron sheet automatically. It is equipped with a special plasma cutting smoke treatment device, which effectively improves the working environment of the plasma cutting machine workshop. This Gantry Plasma Cutter is widely used for steel structure, shipbuilding, bridge and heavy machine industries. Cutting material: low carbon steel, stainless steel and non-ferrous metal, etc. machine can be designed according to the different needs of users. Features of smokeless Hypertherm Gantry CNC Plasma Cutter: 1. Beam with strong structural design, the structure has good rigidity, light weight, exercise inerti. 2. Gantry-type structure, Y-axis synchronous dual-motor drive and XYZ axis with circular rail (optional formula-type linear guide), steady transmission, and high accuracy. 3. Support WENTAI, BEIHANG HAIER, ARTCAM, Type3 software such as the standard G code path generated file can also be read by software conversion software such ad AUTOCAD generated DXF formats. 4. U disk exchange control system processing files, easy to operate. 5. Plasma torch power supply and supporting all famous brands such as American Hypertherm, a number of national patents by the manufacturers. Parameters of smokeless Hypertherm Gantry CNC Plasma Cutter: Model RB3060 Power source 220V,380V/50HZ Working area 3000*6000mm Cutting mode Plasma only, flame only, plasma and flame Cutting speed 0-4000mm per minute Plasma cut thickness Depend on current of plasma power source Flame cut thickness 10-200mm Cutting length 6000-12000mm (Can be as required) Number of Control Axes 3 Height range 0-500mm Height adjuster mode Automatic(include 24DC geared motor) Driving mode Stepper or servo mode, dual driving Operation system FANGLING , STARFIRE, START, Hypertherm Language version English, Chinese Russian, Spanish, French, Japanese, Czech, Slovak File transmission USB transmission
Product Description Railway switch rail for railway measurement & maintenance The switch rail lateral wear gauge is used to measure the switch rail lateral wear and descent height value of the switch rail, it can be used for all the type of switch rail. BENEFITS Switch Rail Lateral Wear Gauge has the advantages of high measuring accuracy, easy to operate,high reliability,small volume,light weight etc. Specification Material alumunium Dimensions (L x W x H) (mm) 800*20*50mm Place of Origin China Brand Name Linkage Product name Digital switch rail wear gauge Model LJ-JGCM-I Vertical wear measure range 92-193mm Lateral wear measure range 0-120mm Resolution 0.01mm Indication error -0.15~0.15mm Quality Control iso Standard crcc Warranty 1YEAR Certificate CE Package & Delivery Aluminum box + pe bag+pe foam+paper carton, 1 units/carton , carton size:36*25*12mm G.W: 4KG Company Profile Wuhan Linkage track Co., Ltd. established in 2022, we are a rapidly growing company involved in the design and manufacture of an extensive range of equipment for the railway industry. We started our business from producing railway measurement device in 2003 and wide our product range to small rail machines like rail cutting machine ,rail grinding etc . Our company has expanded its operation to include three branch office , location facilitates in Xiangyang ,Wuhan and Guangzhou China. Now, Linkage family of brands provides a diverse and comprehensive product line for different markets and demands. Our products are sold in more than 50 countries and regions worldwide. Market acceptance is backed by ISO9001, European CE certification . As a Chinese mainland based company, we like to take our advantage of low cost and strive to offer you quality products with most competitive pricing with integrity.
Product Introduction: The new standard applies to GB7588.1  Adopting LDC1000B integrated controller Super anti-interference serial communication method ,without the need for shielded wires for hall calls and car communication lines The terminal board is highly integrated and fully prefabricated cables to prevent incorrect plug insertion. â? Equipped with safety and door circuit node indicator lights,as well as independent short circuit sockets for easy debugging and maintenance. Equipped with UCMP to prevent accidental movement of the lift car and door lock bypass device  The cabinet body adopts environmentally friendly zinc free galvanized sheet,which is aesthetically pleasing and has a small volume.  Floor mounted and wall mounted Technical parameter: Suitable for business elevators,residential elevators,freight elevators,etc  Maximum speed:3.5 m/S  Input voltage:AC 220V/380V/510V  Power range:5.5KW-30KW Adapted motor:PM/IM â? Adaptive holding brake:currentâ?¤5A,DC48V-220V continuously adjust- able (1V unit) â? Adapted door operator:AC220V door operator system â? Maximum floors:64  Control mode:single elevator/group control  Deceleration method:Distance control directly stops  Size(mm):1300*350*250(height,width,thickness)  Control cabinet weight (kg):35.5
Find the Best and ideal Coco coir Briquettes to Potting mix making. Our 650, 500, 315, 250 Gram coir briquettes are 100 % organic compost materials. BERRI Coir peat 650 gram briquettes are Optimal Organic Potting Soil products to flower Garden, Vegatable Gardens, and Home Gardening in USA BERRI Coconut coir peat 2 Gallon Briquettes/ 650 gram coco peat bricks are Ideal to making potting soil mix to hydroponic cultivation of tomato, cucumber, capsicum farming. In pot mix 40 % coco peat mixing are making a perfect growing mediums for tomato, cucumber farming BERRI coconut coir peat potting mix briquettes are made by 100 % high quality standardise coco peat This unique combination of coconut coir are water retention and aeration properties makes an ideal and optimal growing media to a wide range of hydroponic crops, and it is a sustainability growing media to hydroponic gardenings Berri coco coir briquette products as an excellent choice to popular organic potting mix to home gardening. BERRI coco coir potting soil are moisture-holding capability create an ideal environment to plant growth. BERRI coco potting soil ability to retain water, provide aeration, and promote healthy plant growth has made a valuable for gardeners, and horticulturists . High Expansion | pH Balanced | Compressed | Coconut Soil | Coco Fiber Product Highlights: It is light and convenient. Bacteria and fungal resistant, Cost-effective without compromising quality. Improved oxygenation properties for healthier root development. Retains moisture and is completely organic.
SS 304 Square Pipe SS 304 Square Pipe is an excellent choice for most fabrication techniques as well as indoor and outdoor applications. This non-magnetic product features a semi-smooth, dark gray finish and tapered edges that are dimensionally accurate throughout its length.304 Stainless Steel is a high-strength material with excellent corrosion resistance, making it ideal for marine equipment, railings, medical devices, and food industry equipment. ASTM A554 is the standard specification for welded stainless steel mechanical tubing. Application: 1. Home decoration Home decoration is the place where stainless steel decorative tubes are most commonly used. We have a lot of daily contact with stainless steel anti-theft nets, stainless steel doors and windows, stainless steel screens, and stainless steel staircase handrails. Compared with other materials, stainless steel has the advantages of simplicity, grandeur, rust resistance, and durability, making it the darling of home decoration. 2. Public facilities The demand for stainless steel decorative pipes in public facilities is also increasing. The demand for public facilities such as stainless steel fences, stainless steel guardrails, street lights, and cultural decorative landscapes is also rapidly increasing. 3. Mechanical structure The demand for stainless steel decorative pipes in mechanical structures is very high. Stainless steel has excellent properties such as durability, rust resistance, corrosion resistance, and strong metal texture, which are just in line with the application of mechanical structures. In addition, in recent years, the demand for pipes used in automotive mechanical structures has increased rapidly, which has also led to a rapid increase in the demand for stainless steel pipes used in automotive mechanical structures. 4. Protective windows and doors Nowadays, many protective windows and doors are made of stainless steel material, which not only has a long service life but also has high strength, making it very suitable for making protective windows and doors and windows for high-rise residential buildings.
