Sino-NSH-GER is regeneration system for waste engine oil including diesel engine oil, gasoline engine oil, as well as used hydraulic oil and some other machinery's lubrication oils. Sino-NSH-GER is designed with the combination technology of physical and chemical processing, can effectively remove aging products and contaminants from used oil. Physical processing method can remove solid particles, water, gas, etc. Chemical processing method allows removal of colloid, oxide, pitch in the used oil. Specially, this system can restore the color of used oil and remove the scent rapidly. Sino-NSH-GER is an environmentally friendly system, abandon traditional acid processing method, effectively solve the environmental pollution caused by the old technology of waste oil recycling. Various options are available for this system to improve the automation of operation.
Ferrous And Non Ferrous Metal Scrap, Waste Tyre Scrap.
The PU material is highly wear-resistant and durable and can withstand long-term use and frequent rotational use. The seat and back of our bar stools are filled with high-density foam to provide good sitting support and comfort. Moreover, the seat cushion of this chair is made wider to provide you with a more comfortable resting experience. At the same time, the PU material is soft and has a certain elasticity, which can provide a comfortable touch. Compared with some other materials, PU materials produce less waste during the production process and can be recycled. In addition, PU materials do not release harmful substances and are more environmentally friendly.
Wood charcoal are solid fuel made from compressed wood charcoal. They are used for cooking, grilling, and heating with the advantage of burning longer and producing less smoke. wood Charcoal are also environmentally friendly because they use wood waste or recycled materials. SPECIFICATION: Appearance : Black Variety : Solid or Square Size : 4-13 cm / according to request Moisture : 7% Max Carbon : 75% Max Burning resistance : 2-3 hours MOQ : 20 Metric tons COO : Indonesia Shipping terms : FOB, CNF & CIF Payment terms : TT (DP) & LC at sight Packing Type : 10, 20, 25, 50 kg bag
"Nickel extraction resin In the process of nickel production and nickel electroplating, nickel-extracting resin will produce a large amount of low-concentration nickel sulfate solution, generally containing Ni2+ is 1~10 g/L, and the amount of wastewater discharge is large. If it is discharged directly without recycling, it will not only cause resources waste and pollute the environment. Ion exchange technology is widely used due to its advantages of good effluent quality, recovery of useful substances, and suitable for treating nickel-plating wastewater with low concentration and large amount of wastewater. Jiangsu Kingshan New Material Professional Nickel Extraction Resin has the characteristics of high mechanical strength, easy analysis and regeneration, and long service life."
"Nickel extraction resin In the process of nickel production and nickel electroplating, nickel-extracting resin will produce a large amount of low-concentration nickel sulfate solution, generally containing Ni2+ is 1~10 g/L, and the amount of wastewater discharge is large. If it is discharged directly without recycling, it will not only cause resources waste and pollute the environment. Ion exchange technology is widely used due to its advantages of good effluent quality, recovery of useful substances, and suitable for treating nickel-plating wastewater with low concentration and large amount of wastewater. Jiangsu Kingshan New Material Professional Nickel Extraction Resin has the characteristics of high mechanical strength, easy analysis and regeneration, and long service life."
Nickel extraction resin In the process of nickel production and nickel electroplating, nickel-extracting resin will produce a large amount of low-concentration nickel sulfate solution, generally containing Ni2+ is 1~10 g/L, and the amount of wastewater discharge is large. If it is discharged directly without recycling, it will not only cause resources waste and pollute the environment. Ion exchange technology is widely used due to its advantages of good effluent quality, recovery of useful substances, and suitable for treating nickel-plating wastewater with low concentration and large amount of wastewater. Professional Nickel Extraction Resin has the characteristics of high mechanical strength, easy analysis and regeneration, and long service life.
Plastic Pelletizing Machine The plastic pelletizing machine also known as plastic granulator, is mainly used for processing industrial and agricultural waste plastics. With special screw design and different configurations, plastic pelletizing machine models include single-screw plastic granulator, conical twin-screw plastic granulators, parallel twin-screw granulators. The plastic pelletizing machine is suitable for most common waste plastics range from PP, PE, PS, ABS, PA, PVC, PC, POM, EVA, LCP, PET, PMMA and other plastic regeneration and color mixing granulation. Recycled pellets can be reused again to make new plastic products. As the most widely used and most popular plastic recycling machine in the waste plastic recycling industry, granule-making machines can both create significant economic benefits and optimize resource allocation to protect the environment. Composition of plastic pelletizing equipment The main engine of the plastic granulator is an extruder, which consists of an extrusion system, a transmission system and a heating and cooling system. The auxiliary machines of the plastic pelletizing machine unit mainly include pay-off device, straightening device, preheating device, cooling device, traction device, meter counter, spark tester, and wire take-up device. The main sections of whole plastic pelletizing equipment involve Belt conveyor with metal detector/Force feeder/Compactor/Main extruder with degassing/Second extruder/Hydraulic screen changer/Die face cutting system/Water cooling tank/Dewatering machine/Vibrator screen/Packaing system. The extrusion system includes a hopper and a die, and the plastic is plasticized into a uniform melt through the extrusion system. The transmission system is used to drive the screw. The torque and speed required for the screw supply during the extrusion process generally consists of a motor, a reducer and a bearing. Heating and cooling systm is necessary conditions for the plastic extrusion process to proceed. The heating device heats the plastic in the cylinder externally to heat it up to the temperature required for the process operation. The cooling device is set up to ensure that the plastic is in the temperature range required by the process
Sino-NSH-GED-WD is a waste oil regeneration system that cracks waste oil to diesel fuel. Sino-NSH-GED-WD adopts the atmospheric distillation technology, also known as cracking technology. During the distillation process, the waste oil is heated to the setting temperature and turns into oil mist, then it passes through the catalyst tower. After sufficient reaction with the catalyst, the oil mist passes through the condensing system to be cooled to liquid diesel. This system can be applied for gasoline motor oil, diesel motor oil, all kinds of engine oil, mineral oil, synthetic oil, transmission oil, hydraulic oil, gear oil and other used black lubricant oils to produce clean diesel oil. Diesel acquired from NSH-GED-WD system meets international standards and can be fully applied to burners, diesel engines, generators, etc. This system is very safe because the temperature setting is rigorous and the machines are stabilization. Our technical team commits to design the most reasonable and high efficient distillation system to realize the profit maximization of the both parties. Recovery rate is above 90% with low operation cost, only 5-6 USD for recycling one ton used oil.
Sino-NSH-GED-WD is a waste oil regeneration system that cracks waste oil to diesel fuel. Sino-NSH-GED-WD adopts the atmospheric distillation technology, also known as cracking technology. During the distillation process, the waste oil is heated to the setting temperature and turns into oil mist, then it passes through the catalyst tower. After sufficient reaction with the catalyst, the oil mist passes through the condensing system to be cooled to liquid diesel. This system can be applied for gasoline motor oil, diesel motor oil, all kinds of engine oil, mineral oil, synthetic oil, transmission oil, hydraulic oil, gear oil and other used black lubricant oils to produce clean diesel oil. Diesel acquired from NSH-GED-WD system meets international standards and can be fully applied to burners, diesel engines, generators, etc. This system is very safe because the temperature setting is rigorous and the machines are stabilization. Our technical team commits to design the most reasonable and high efficient distillation system to realize the profit maximization of the both parties. Recovery rate is above 90% with low operation cost, only 5-6 USD for recycling one ton used oil.
Plastic Granulation Machine A plastic granulation machine, also known as a plastic granulator or plastic pelletizer, is a device used to transform plastic waste into small, uniform plastic pellets or granules. These pellets can be used as raw materials for various plastic manufacturing processes, such as injection molding, extrusion, and blow molding. Working Principles Feeding: Plastic waste, such as discarded plastic products or post-industrial plastic scraps, is fed into the machine's hopper or feeding system. The waste is usually in the form of larger pieces or chunks. Shredding: The plastic waste is first shredded into smaller pieces using blades or knives. This step helps in reducing the size of the plastic and preparing it for further processing. Grinding: The shredded plastic is then further reduced in size through grinding. Grinding mechanisms, such as rotating blades or a rotor, break down the plastic waste into even smaller particles. This process increases the surface area of the plastic, making it easier to melt and form into pellets. Melting and Extrusion: The ground plastic particles are fed into a heating chamber within the granulator machine. Heat is applied to melt the plastic particles. The molten plastic is then forced through a die or a screen with small holes to create cylindrical strands or filaments. The strands are formed by the action of rotating screws or rollers within the machine. Cutting and Cooling: As the strands exit the machine, they are cut into uniform lengths by a cutting mechanism. This results in the formation of plastic pellets or granules. The pellets are usually cooled using air or water to solidify them and prevent sticking or clumping. In some cases, a vibrating system is used to separate and cool the pellets. Collection and Packaging: The plastic pellets are collected and stored in containers or bags. They are then ready to be used as raw material in various plastic manufacturing processes, including injection molding, extrusion, or blow molding. The entire process is typically controlled and monitored by a control panel that allows operators to adjust parameters such as temperature, speed, and cutting length to achieve the desired pellet quality and production efficiency.
Waste vegetable cooking oil for biodiesel, refined sunflower oil, refined corn oil, refined canola oil, refined jatropha oil, baby diapers, crude edible palm oil, refined brown and white icumsa 45 sugar and biodiesel machine ..Manufacturer, export
They are commonly used as a spice in cooking and have a warm, sweet, and slightly bitter flavor. Cloves are often used in both sweet and savory dishes, and they are a common ingredient in various spice blends. Country of origin : Indonesia Packaging : PP Bag 25/50 Kg, paper bag or Custum Colours : Brown dark
Industrial grade Guar Gum comes in different viscosity and specs that makes it outstanding qualities for a wide range of industrial uses, guaranteeing effectiveness and reliability. It can be used in paper industry, mining industry, oil and gas drilling, textile industry, and many more. Advantages: 1. Decreased use of water in several industrial operations. 2. Better waste management as a result of lesser spills and dust particles. 3. Economical substitute for stabilizers and natural thickening agents made of synthetic materials. 4. Biodegradable and non-toxic substance.
Sodium Percarbonate Uses It is an environmentally friendly,high-performance low-temperature oxygen bleaching agent , and is widely used in industry as well as in daily life It is increasingly replacing sodium perborate for uses in detergent , bleaching powder, wood floor cleaner, carpet cleaner and other household and personal care products It also has function as a disinfector , oxygenation agent , and is utilized in industrial waste water treatment, sterilization, and first-aid As oxygenation agent in aquaculture As Pulp bleaching agent for the paper industry As bleaching agent and dyeing agent in the textile industry.
Grade: Recycled flakes, hot washed by Steam 80-90degree Color: 100% clear, white, Blue/Green Transparency: 90% PVC content: < 2ppm Moisture: < 1% Impurities: < 0.01% Packing : 25 / 50 / 100 / 500 / 1000kg per bag Packing material: PP woven bag or paper bag Loading weight: 25.00 TON per 40HQ Supply ability: 1000 per month Minimum order quantity: 25 TONS
Robusta Coffee Beans are Coffea canephora coffee beans which have a stronger and bitter taste than Arabica coffee. These beans are smaller, high in caffeine, and grow in hot climates. Usually used in instant coffee and coffee blends. SPECIFICATION: Appearance : Dark Green to Dark Brown in color. Variety : Powder & Seeds Size : 5 - 8 mm Moisture : 12,5% Max Waste : 1% Max MOQ : 20 Metric tons COO : Indonesia Shipping terms : FOB, CNF & CIF Payment terms : TT (DP) & LC at sight Packing Type : 10, 20, 25, 50 kg PP bags
Suitable for top-soil, quarried stone, remediation of contaminated soils beaches, demolition waste and green recycling duties. concrete, stones, etc., to meet the set requirements. Exclusive wide inlet profile to facilitate material loading. Bolt on wear edges making replacement simple, reducing downtime and maximising productivity. Frame protection for hydraulic components. High Strength Structual Steel Main Frame. Wear resitant steel selected for contact area of screening Drum. Model:GHS12A/GHS16A Excavator:16-24ton/25-30ton Sieve-drum diameter:1200mm/1600mm Sieve-drum depth:880mm/1230mm System pressure:160-250bar/200-300bar Bucket capacity:1.05m3/2.2m3 Rate of flow:100L/min/150L/min Weight:1400KG/2600KG
Handmade papers, paper products like shopping bags, wine bags, envelopes, gift wraps, photo frames, journals, scrap books, notebooks, desk accessories, boxes, christmas decorative items, hobby items and stationery items.Manufacturers and exporters
Product overview: Stickies control agent can reduce the cohesiveness of resin composition in paper pulp and waste paper pulp by utilizing own positive electricity to fix them on pulp, thus preventing the pollution of net, coarse calico, dryer, etc. due to resin. In the meanwhile, it can reduce the shutdown and yield loss caused due to cleaning deposit. Technical specifications �· Appearance: Colorless to faint yellow liquid �· Solids content: 30 �±1% �· pH value: 2% water solution 3-7 �· Viscosity (25�°C): 500-3000 mpa.s �· Ionic type: Cation Performance characteristics 1. It can reduce the cohesiveness of resin composition in paper pulp and waste paper pulp by utilizing own positive electricity to fix them on pulp, thus preventing the pollution of net, coarse calico, dryer, etc. due to resin. 2. It can reduce the shutdown and yield loss caused due to cleaning deposit. 3. It can improve the paper machine vehicle speed and paper quality. 4. It is stable in acid, alkali and temperature. 5. It is soluble in water and generate a little bubble. Usage tips �· Adding place: It shall be added near the resin obstacles with good mixing. �· Adding method: The product is diluted for 10-20 times with clean water, with even mixing. �· Additive amount: 0.2-0.8 kg/ton slurry. Packing and storage �· It is packaged in 200kg or 1000kg plastic barrel, or packaged according to the users' requirements. It shall be stored in cool place (storage temperature at 0-30), with guarantee period: 6 months.
